Root Method For N8 U/U1/W Series Phones Rev8 Bootloader
New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation
Paypal email is [email protected]
Before Starting This Process Get A USB2 Mini Hub You Are Most Likely Going Too Need It. Do Not Come In Here And Post This Is Not Working Until You Have Tried It With The USB2 Mini Hub!
You Must Start From Stock U Firmware. IT Seems To Be The Less Likely To Brick Your Device As Explained In The Disclaimer!
Disclaimer Please Read!!
This may brick your device there is a problem especially with s8 and note 8 models where the tz partition becomes corrupted and on some occasions after flashing combination firmware your phone will become bricked and as of now there is no way to fix it. There is no way to predict if it will happen. It doesn’t seem too happen very often on s8+ but it does occasionally happen on the other 2 models so do this at your own risk. I would say it probably happens 10 percent of the time on s8 and note 8 especially when on bit 6 or higher firmwares. S8+ it rarely happens too but it still may. If you take the risk and it happens do not pm me asking how to fix it as of time I posted this there is no way to fix it
Please Read Notes
OEM Toggle Does Nothing On US Model Phones
You will most likely need a USB 2 mini hub for Odin to work if using windows 8 or higher. I would temporarily disable windows defender or antivirus software while performing the procedure with your computer.
You cannot have root on any rom except a nougat rom also flashing custom boot images cannot be done or using systemless magisk. Hiding root or running modules cannot be done. There is no oem unlock and even if there is you cannot unlock your bootloaders or run any aosp based roms.
You can be on any firmware to achieve safestrap but to run a rooted rom you will be limited to using a special nougat android 7 rom. You can have safestrap on pie android 9 which gives you some ability to modify system files flash zips etc and have access too data and other partitions that are normally blocked but you can not run root on android 9 because root on android 9 requires a modified boot image
Anything here with a .7z extension will get unzipped before using
Anything here with a .zip extension will get flashed a zip in safestrap
Anything here with a .tar or .md5 gets flashed in odin
Anything here with a .img extension gets flashed as image in safestrap
Additional Help Can Be Found In The Telegram Channel
Telegram Channel For 8 Series Root
Downloads
Odin3_v3.14.1_3B_PatcheD.7z
SM-N950U_VZW_N950USQU8DVB1.7z -- Stock U Firmware Flash First In Odin
SAFESTRAP_N8_GUI_INSTALLER.7z - GUI 1 Click Method-Recommend!
Alt Method
Safestrap_N8_Cmd_Line.7z - Command Line 1 Click
Directions Once On Stock U Firmware
If using Safestrap_N8_Cmd_Line follow instructions on Cmd screen.
1. Download files and unzip SAFESTRAP_N8_GUI_INSTALLER.7z
2. Plug phone into computer and allow access too phone data
3. Run the SAFESTRAP_8_SERIES.exe file. In program choose your model of phone in drop down box then click Root Button and select COMBINATION_FA71_N950USQU8ATF1.tar.md5 file too flash it is packed in the zip you downloaded from above. Everything else is automatically done for you just follow any pop up that come up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Phone will reboot too download and flash combo firmware and then reboot. Click dialog stating that it has rebooted and it will inject safestrap all automatically
5. When done you will have a minimal system with safestrap recovery
Instructions For Installing Rom
System Images
system_n950_nougat.img - Nougat Image That Can Be Rooted
Canadian Roms
N950W_NOUGAT_V8.7z - Nougat Image That Can Be Rooted
1. From here you will either a nougat or pie system image to your phone which will be flashed in safestrap. Reboot to safestrap using the safestrap control app once in safestrap choose wipe then advanced wipe and wipe data. Then goto home screen of safestrap using install tab and the the flash image tab at bottom. Choose system image you copied to phone. System images get flashed too system partition.
2 My nougat system images are not pre rooted if you want for root you will also need too flash a root zip in safestrap.
Root Zips For Nougat Image
EFTSU_System-v20.4_12_28_22.zipSuperSU_System_12_28_22.zipPhhs_SuperSU_S8_S9_Series.zip3. You can enter safestrap anytime on nougat by simply rebooting to recovery which will enter safestrap or by using the safestrap control app
Fingerprint Fix For Nougat Roms
SM_N950U_FINGERPRINT_FIX.exe
4. If fingerprint not working reboot phone too download mode and run this SM_N950U_FINGERPRINT_FIX.exe
Pie With Safestrap Roms
Full Guide Found Here
Video Tutorial
Thank You Liset Pedraza
Method In This Video To Obtain Safestrap Has Changed But The Process Of Using Safestrap Still Pertains
S8_Series_Install_Root.mp4
drive.google.com
Credits
klabit87 - Basically Everything
GSMCHEN - The root method
elliwigy -The root method
afaneh92 -Safestrap and too much too mention[/MEDIA]
oakieville - 1 click method
S8 SM_G950U/U1/W Can Be Found Below
2023 SM-G950U/U1/W Rev8 One Click Root/Safestrap Inject Method
Root Method For S8 U/U1/W Series Phones Rev8 Bootloader New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation Paypal email is [email protected] Before Starting...
forum.xda-developers.com
S8+ SM_G955U/U1/W Can Be Found Below
2023 SM-G955U/U1/W Rev8 One Click Root/Safestrap Inject Method
Root Method For S8+ U/U1/W Series Phones Rev8 Bootloader New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation Paypal email is [email protected] Before Starting...
forum.xda-developers.com
Installed on At&t Note 8. Worked like a charm. Only posting pic to show everything went without issue. Installed pre rooted Nougat rom. Thank you very much sir. Hope you dont mind that I posted pic.[ ATTACH]4963365[/ATTACH]
Sent from my SM-N950U using Tapatalk
butchieboy said:
Installed on At&t Note 8. Worked like a charm. Only posting pic to show everything went without issue. Installed pre rooted Nougat rom. Thank you very much sir. Hope you dont mind that I posted pic.[ ATTACH]4963365[/ATTACH]
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thank you for confirming it worked
Sent from some device I modified
jrkruse said:
Thank you for confirming it worked
Sent from some device I modified
Click to expand...
Click to collapse
You IMo this is a lot smoother than using EDL specially for the non seasoned modders.
If EDL works for you it works great But if you have EDL issues it seems like it could be a nightmare.
This is gonna be a turning point for a while This can open root for several samsung devices that may not have it yet I know last time I looked J3 US didnt have root. But i have most of whats needed to try this on it too
TheMadScientist said:
You IMo this is a lot smoother than using EDL specially for the non seasoned modders.
If EDL works for you it works great But if you have EDL issues it seems like it could be a nightmare.
This is gonna be a turning point for a while This can open root for several samsung devices that may not have it yet I know last time I looked J3 US didnt have root. But i have most of whats needed to try this on it too
Click to expand...
Click to collapse
This is definitely alot safer method for sure
Sent from some device I modified
Went as smooth as a boiled egg[emoji1787]
Sent from my SM-N975U using Tapatalk
Awesome. Nice work again elli and jrk. Always love to see more ways to get back into Nougat with root. Now if only we had a stable Android 7 Rom that wasn't as buggy as Samfail.
It has the battery bug that only charges at 80% after installing the root
Loboreach17 said:
It has the battery bug that only charges at 80% after installing the root
Click to expand...
Click to collapse
As expected.
Sent from my SM-G950U using XDA Labs
You can probably still charge to 100% in download mode.
Sent from my SM-N975U using Tapatalk
Hi,
Sorry for the noob question..
IF Im using Samfail with
TWIZtd Vengeance N8 V2.5-
What's the advantage of going this route ? What does BL ver.7 give me?
I do have frequent kernel panic reboots.. But think that might be the Rom.
Thanks
Wilsonb said:
Hi,
Sorry for the noob question..
IF Im using Samfail with
TWIZtd Vengeance N8 V2.5-
What's the advantage of going this route ? What does BL ver.7 give me?
I do have frequent kernel panic reboots.. But think that might be the Rom.
Thanks
Click to expand...
Click to collapse
There was no way to root previously if you were on stock v7 bootloaders. All this is is a way too root if you didn’t already have root
Sent from some device I modified
jrkruse said:
There was no way to root previously if you were on stock v7 bootloaders. All this is is a way too root if you didn’t already have root
Sent from some device I modified
Click to expand...
Click to collapse
:good:
Ok, Im still on BL2.5 and rooted. Thanks for the reply.
Loboreach17 said:
It has the battery bug that only charges at 80% after installing the root
Click to expand...
Click to collapse
If you look in the s8 threads I have a hack to pass the 80% charge limit It is not a bug It is a safety feature so you dont blow your fingers off
TheMadScientist said:
If you look in the s8 threads I have a hack to pass the 80% charge limit It is not a bug It is a safety feature so you dont blow your fingers off
Click to expand...
Click to collapse
This is great news and thanks for all your work. I know you say look in s8 threads.. but could you elaborate a little or simply post a link?
Wilsonb said:
This is great news and thanks for all your work. I know you say look in s8 threads.. but could you elaborate a little or simply post a link?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/themes/wip-manual-charge-past-80-snap-dragon-t3918553
Sorry mate dont think about it sometimes
TheMadScientist said:
https://forum.xda-developers.com/galaxy-s8/themes/wip-manual-charge-past-80-snap-dragon-t3918553
Sorry mate dont think about it sometimes
Click to expand...
Click to collapse
Thanks for this.. but after reading through it sounds like folks using SamFail (Bl 2.5) , this battery charge method won't work.
SM-N950Ui
TWIZtd Vengeance N8 V2.5-
This is a bummer.. Using SamFail and do not have option for Expose utility I think.
So this WILL NOT WORK?
Might try it anyway..
Wilsonb said:
Thanks for this.. but after reading through it sounds like folks using SamFail (Bl 2.5) , this battery charge method won't work.
SM-N950Ui
TWIZtd Vengeance N8 V2.5-
This is a bummer.. Using SamFail and do not have option for Expose utility I think.
So this WILL NOT WORK?
Might try it anyway..
Click to expand...
Click to collapse
No it's for the U series not N
Thanks
Related
Hello,
I have just gotten a MetroPCS Samsung Galaxy S3
I have gone and watched videos from wwjoshdew and followed these links
http://forum.xda-developers.com/showthread.php?t=1746680
But those are for Sprint/Verizon/AT&T/Tmo
So I was wondering does anyone know if the Sprint version will work on MetroPCS S3's or
does it need a 'new image' or what?
Since I can not ask this noob question I am asking it here.
If it could be forwarded to someone who is a developer and such I would appreciate it.
I just got the phone 10/20/12 and the "offical" release is 10/22/12 on www.metropcs.com but the corporate stores (like here in Miami) had it available on 10/19/12.
So, since it's new I understand that part of the question but if anyone does know, please let me know.:fingers-crossed:
philmiami
philmiami said:
Hello,
I have just gotten a MetroPCS Samsung Galaxy S3
I have gone and watched videos from wwjoshdew and followed these links
http://forum.xda-developers.com/showthread.php?t=1746680
But those are for Sprint/Verizon/AT&T/Tmo
So I was wondering does anyone know if the Sprint version will work on MetroPCS S3's or
does it need a 'new image' or what?
Since I can not ask this noob question I am asking it here.
If it could be forwarded to someone who is a developer and such I would appreciate it.
I just got the phone 10/20/12 and the "offical" release is 10/22/12 on www.metropcs.com but the corporate stores (like here in Miami) had it available on 10/19/12.
So, since it's new I understand that part of the question but if anyone does know, please let me know.:fingers-crossed:
philmiami
Click to expand...
Click to collapse
You should be able to root your phone using the tool I have attached it is based on the DebugFSroot method :fingers-crossed:. Make sure to install the drivers for your phone first before attempting to use this tool, after you download it unzip the file to your desktop, plug your phone into your computer, then execute the bat file and follow the instructions (Note this is for Windows only).
Here is a screen shot of About on my phone
**This is the screen shot from the phone.*** <<- would not let me post a outside link since I just read on this forum and not post (since I am no developer, just 3 posts so far)
Have to cut/paste this link I guess
picasaweb.google.com/114859325136619356966/MetroPCSGalaxyS3
So again, I just ask do you think this tool would work on this.
I am hesitant because this is not like the other phones in which they have been Gingerbread or my wife's which is 4.0 but it is a LG Motion (MetroPCS) and the root was simple (just followed a youtube video) and the phone was $149.
This one, for me, was $500, so I don't want to get a $500 brick and then try to return/exchange it.
So I am cautious when it comes to doing this.
Thanks,
philmiami
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
shimp208 said:
You should be able to root your phone using the tool I have attached it is based on the DebugFSroot method :fingers-crossed:. Make sure to install the drivers for your phone first before attempting to use this tool, after you download it unzip the file to your desktop, plug your phone into your computer, then execute the bat file and follow the instructions (Note this is for Windows only).
Click to expand...
Click to collapse
shimp208 said:
You should be able to root your phone using the tool I have attached it is based on the DebugFSroot method :fingers-crossed:. Make sure to install the drivers for your phone first before attempting to use this tool, after you download it unzip the file to your desktop, plug your phone into your computer, then execute the bat file and follow the instructions (Note this is for Windows only).
Click to expand...
Click to collapse
I just used this method on my metropcs S3 and it worked. Thanks, all I need now is a way to unlock the phone to use it with any SIM and I'm good to go.
dvdee said:
I just used this method on my metropcs S3 and it worked. Thanks, all I need now is a way to unlock the phone to use it with any SIM and I'm good to go.
Click to expand...
Click to collapse
To unlock the phone you will need a SIM unlock code you can find many different places to purchase a SIM unlock code, and I believe if your account is in good standing with Metro and your nice to them they might be able to unlock it for you. Also here is a link to Clockworkmod 6.0.1.5 for the MetroPCS Galaxy S3. Enjoy my friend .
Already got root thanks
It did not take long for someone to have the root process (even for a mac) in one of the other forums
so I got my phone rooted
put titanium backup pro on there and froze the bloatware from MetroPCS
so it's doing good for me
and a lot better phone than the LG Esteem 4G I had (with MetroPCS)
shimp208 said:
To unlock the phone you will need a SIM unlock code you can find many different places to purchase a SIM unlock code, and I believe if your account is in good standing with Metro and your nice to them they might be able to unlock it for you. Also here is a link to Clockworkmod 6.0.1.5 for the MetroPCS Galaxy S3. Enjoy my friend .
Click to expand...
Click to collapse
you will not be able to unlock this phone as far as the sim goes its for the 4g lte sim type cards not GSM
fatalfury said:
you will not be able to unlock this phone as far as the sim goes its for the 4g lte sim type cards not GSM
Click to expand...
Click to collapse
are you 100% sure of this? do you have proof?
They said the same of every LTE phone out there but most (if not all) of them support GSM at a varying degree, from my rezound that needed firmware updates to be fully functional to the iphone 5 that is fully capable and unlocked.
I mostly wanted to post this to know the truth and so other people looking out there don't get confused by this post that may or may not be true
Automatic root not working
every time i try this method it says that the daemon has started successfully
but then it says that there are system partitions not found, rooting failed
the drivers downloaded perfectly, but a message popped up on my phone that said they're
was no software on my pc that could detect my phone
haxmethod said:
every time i try this method it says that the daemon has started successfully
but then it says that there are system partitions not found, rooting failed
the drivers downloaded perfectly, but a message popped up on my phone that said they're
was no software on my pc that could detect my phone
Click to expand...
Click to collapse
I would recommend uninstalling the drivers you installed then re-installing them. Also make sure USB debugging is checked in developer options.
Sent from my SCH-I535 using xda premium
i need the drivers
i just wanted to know if the drivers are in the folder with the debugFsroot file and if so witch one is it. also i dont want to put a rom. but when the official update from metro comes out would it be affected by the root?
---------- Post added at 12:18 PM ---------- Previous post was at 11:18 AM ----------
*i need the driversi just wanted to know if the drivers are in the folder with the debugFsroot file and if so witch one is it. also i dont want to put a rom. but when the official update from metro comes out would it be affected by the root?
Sorry I need one rom for s3 .metropcs thanks
Enviado desde mi SCH-R530M usando Tapatalk 2
jesus10161 said:
Sorry I need one rom for s3 .metropcs thanks
Enviado desde mi SCH-R530M usando Tapatalk 2
Click to expand...
Click to collapse
If your looking for a good stable ROM for the MetroPCS version of the Galaxy S3 I would suggest taking a look at CM 10 stable http://get.cm/get/4M9.
Sent from my Nexus 10 using xda premium
I rooted my phone last night through Odin and didn't realize until today that I can't receive data unless connected to wifi.
Any suggestions about why and how to fix it?
Sent from my SCH-R530M using Tapatalk 2
barricademan said:
I rooted my phone last night through Odin and didn't realize until today that I can't receive data unless connected to wifi.
Any suggestions about why and how to fix it?
Sent from my SCH-R530M using Tapatalk 2
Click to expand...
Click to collapse
Is your IMEI number still intact? Because if it has been altered it will effect your ability to use mobile data. Also I would suggest re-flashing the stock ROM and seeing if that fixes your data connection issue.
Thanks for the reply. After going into Rom Manager Pro and selecting reboot my data is now working. Not sure why, I rebooted from the power button many times before and nothing happened. All is well again though.
Sent from my SCH-R530M using Tapatalk 2
Any MetroPCS GS3 owners...
Can you please try Triangle Away 2.70 and see if it works?
We're also trying to get you officially added to Mobile Odin.
*Edited*
You should just need to download Mobile Odin Free, follow the prompts to make a dump, upload and link the dump.
Thanks!
The current DebugFSroot method no longer works with the official Jellybean 4.1.2 update. Samsung has just started pushing the update onto MetroPCS phones. The update erased root access, and now I can't find anything to re-root my phone other than flashing a modded/rooted ROM via Odin, which I am NOT going to do. Does anyone have any suggestion on how to root MetroPCS Samsung Galaxy S3 4.1.2 Jellybean?
The Round Peg said:
The current DebugFSroot method no longer works with the official Jellybean 4.1.2 update. Samsung has just started pushing the update onto MetroPCS phones. The update erased root access, and now I can't find anything to re-root my phone other than flashing a modded/rooted ROM via Odin, which I am NOT going to do. Does anyone have any suggestion on how to root MetroPCS Samsung Galaxy S3 4.1.2 Jellybean?
Click to expand...
Click to collapse
I would recommend trying mskip's Samsung Galaxy S3 Unified Toolkit it supports the MetroPCS version of the Galaxy S3 and can root Jelly Bean builds as well.
shimp208 said:
I would recommend trying mskip's Samsung Galaxy S3 Unified Toolkit it supports the MetroPCS version of the Galaxy S3 and can root Jelly Bean builds as well.
Click to expand...
Click to collapse
yeah cant get my phone to work with odin right now went back to stock to get the update and now im not sure how to fix this...???
Hello my dear friends!
Table of contents!
&WIP&
Imagres:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About the toolkit:
This is a very good looking toolkit with almost everything you would want to do with your shiny new Nexus 5! This should work on all models (conditions may vary ).
This toolkit offers a 'one-click' method of:
1.Unlock the bootloader
2.Basic ADB commands to get you buggin!
3.Basic Fastboot commands to get you booting!
4.Installing Drivers!
5.ROM Flashing
The list could go on for about 2-3 more points but I'm lazy! (forgetful)
The updater will tell you when there is a new update and will take you to this post to find out about it.
Please enjoy, and if you like feel free to donate but don't feel that you need to this is FREE!!, I'll send you my gratitudes!!
Links down below!
Downloads and Changes
News:
The bootloop bug should be fixed now!
Downloads Section
This is where you'll find a list of changes and the download links!
Main - MEGA
Mirror - Dropbox
===========================
CHANGES:
Version 1.2.0.0
Fixed Bootloop issue
Version 1.1.0.0
Added Variable Uri Downloads (CWM + TWRP)
Version 1.0.0.0
Initial Release
Has anyone tried this yet? I don't have the device to test with.
Sent from my iPhone using Tapatalk
after installing TWRP it gives you a boot loop , opened recovery tried to wipe phone factory wipe fails...
toe451 said:
after installing TWRP it gives you a boot loop , opened recovery tried to wipe phone factory wipe fails...
Click to expand...
Click to collapse
That's strange. Have you tried cwm?
Sent from my Nexus 7 using Tapatalk 4
squabbi said:
That's strange. Have you tried cwm?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
same thing boot loop , factory reset not working can not wipe data ...
toe451 said:
after installing TWRP it gives you a boot loop , opened recovery tried to wipe phone factory wipe fails...
Click to expand...
Click to collapse
did you let it fully reboot after unlocking the bootloader?
xBeerdroiDx said:
did you let it fully reboot after unlocking the bootloader?
Click to expand...
Click to collapse
it rebooted the bootloader , i didn't boot into andriod. unlock , bootloader reboot, install twrp then full reboot into bootloop
only thing i tested was the flashing recovery.. worked, but installed twrp 2.6.3.1 and they have 2.6.3.2 posted.. could you update that please and thanks?
madLyfe said:
only thing i tested was the flashing recovery.. worked, but installed twrp 2.6.3.1 and they have 2.6.3.2 posted.. could you update that please and thanks?
Click to expand...
Click to collapse
Yea sure gimme a minute! I might find a way to remotely set the download links.
Sent from my iPhone using Tapatalk
madLyfe said:
only thing i tested was the flashing recovery.. worked, but installed twrp 2.6.3.1 and they have 2.6.3.2 posted.. could you update that please and thanks?
Click to expand...
Click to collapse
Okey so in the new update (1.1) I've made it so i can specify what the download link is for both cwm and twrp.
All you guys need to do is let me know when there is a newer version!
squabbi said:
Okey so in the new update (1.1) I've made it so i can specify what the download link is for both cwm and twrp.
All you guys need to do is let me know when there is a newer version!
Click to expand...
Click to collapse
Not just your tool that ends in a bootloop, the n5 bootloader actually has some faults, I was thinking of making a patched bootloader for the device, but due to noone having a bricked device i cannot
ricky310711 said:
Not just your tool that ends in a bootloop, the n5 bootloader actually has some faults, I was thinking of making a patched bootloader for the device, but due to noone having a bricked device i cannot
Click to expand...
Click to collapse
So do I have to do something to fix the bootloop issue? Also why is that so? You need to have a bricked phone before you could make a patched bootloader.
squabbi said:
So do I have to do something to fix the bootloop issue? Also why is that so? You need to have a bricked phone before you could make a patched bootloader.
Click to expand...
Click to collapse
wipe data factory reset(data, dalvik and cache)
that fixes the bootloop!
and modifying the bootloader is quite risky, if you do something wrong it could fail to write, fastboot and adb can fail to operate, cauld cause major issues that are un repairable without riffbox etc.. and even sometimes that doesnt work...
looks good, but bugs as above..
so pls solve them soon
meethere said:
looks good, but bugs as above..
so pls solve them soon
Click to expand...
Click to collapse
I'll see what needs to be done. Thanks for being patient.
Sent from my Nexus 7 using Tapatalk 4
Fixed Bootloop Issue! == Version 1.2 Released!
Version 1.2 has been released!
This is to address the bootloop issue that some users have been getting. I hope this works!
Do we need 20 toolkits doing the same stuff? People need to learn what they are doing. With the rise of kits there is a rise in bricked phones for stupid reasons. People flashing cm kernels on non cm roms because they have no idea.
One kit is enough stop reinventing the wheel. Put your skills to something more useful.
Sent by mobile telephone.
howard bamber said:
Do we need 20 toolkits doing the same stuff? People need to learn what they are doing. With the rise of kits there is a rise in bricked phones for stupid reasons. People flashing cm kernels on non cm roms because they have no idea.
One kit is enough stop reinventing the wheel. Put your skills to something more useful.
Sent by mobile telephone.
Click to expand...
Click to collapse
I had a feeling this would be bad. I get your point, this was posted ages ago. Don't worry, the nexus isn't my main place anymore.
Thanks for your input.
Sent from my HTC One using Tapatalk
howard bamber said:
Do we need 20 toolkits doing the same stuff? People need to learn what they are doing. With the rise of kits there is a rise in bricked phones for stupid reasons. People flashing cm kernels on non cm roms because they have no idea.
One kit is enough stop reinventing the wheel. Put your skills to something more useful.
Sent by mobile telephone.
Click to expand...
Click to collapse
That's funny. So you revived a 4 month old Dead Thread for what?? So we could hear your useless stupid rants about a contribution that someone wanted to make, an area which you have failed to achieve. If people don't read and know what they are doing then that is their fault, not someone who wanted to learn and or grow his skills by creating a toolkit. Put your skills to something useful and release something of your own, don't go being critical trying to revive old threads for no reason; and complaining about toolkits all over various Nexus 5 threads. Grow Up!
1.0 Introduction
This is a series of guides that will cover the basics of ROMs, kernels, recoveries, installation and so on. Questions asked in here will be answered as fast as possible. This is not a thread for unbricking your device, but rather to avoid getting into a situation where you end up with a bricked device. I do realise that the LG G2 is a year old, but since its price has dropped, it offers A LOT of value for money and while some people leave for newer devices, other people grab the G2.
1.1 Rooting
Let's cover the basics steps of rooting, installing a custom recovery and making your first backup.
If you do not know what root is, a brief explanation would be getting access to the root of your device. What that means is that you get access to parts of your device that are otherwise hidden - because the average Joe would not know what to do with root access and could possibly end up with a device that is unusable. As implied, there is a risk involved in rooting your device, although with the LG G2 the action is most often reversable.
Disclaimer: I cannot be held responsible for any damage you do to your device. Following this guide should be safe, but there is a risk involved
So how do you root your LG G2?
The absolute easiest way is to download towelroot. If your software version is 20G or newer, (or if towelroot doesn't work for you) try stump root. Link further below.
towelroot can be downloaded from towelroot.com
Click the lambda, download the apk file and install it.
If you get a pop up message claiming that the apk is dangerous, agree to it and continue installing. As previously mentioned, rooting IS not risk free, and this application abuses an exploit in the kernel.
After installing and opening, press "make it ra1n". That will root your device.
When finished, reboot. Then go to Play Store and download SuperSU. SuperSU is an application that will allow apps to gain superuser access and it is vital for any root user.
Now you have root and the ability to give SuperUser access to apps.
EDIT: For Software versions 20G and up, towelroot doesn't work anymore, use stump root instead.
Link is here: Stump Root for LG Devices
1.2 Installing a Custom Recovery
Why is a custom recovery necessary? It is, because it’s the easiest way (and often the only way) to get your device back and working in case you get stuck in a bootloop. It’s also vital for flashing custom ROMS and custom kernels.
How do I get one? Well, there’s an app for that!
Check out this thread to get AutoRec, an application that’ll automatically install a custom recovery to your G2! Credits go to @Cloudyfa and @bender_007 CLICK HERE
IMPORTANT!
MAKE SURE YOU DOWNLOAD THE CORRECT VERSION FOR YOUR DEVICE!!!!!!
After downloading, install the application, allow it superuser access and install a custom recovery.
When finished, reboot to recovery. You’ll need to take a backup of your working ROM.
2.0 Making a backup of your working ROM and vital partitions
Now you should be in recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tap “Backup”, and backup the following partitions:
Boot
System
Data
EFS
The backup will take roughly 3 minutes to finish, be patient. When it’s done, reboot system.
Make a few copies of the backup. ALWAYS have a backup on your device , keep one on your computer and one on a microSD somewhere.
Cheers for this...looking at possibly buying it soon. So I guess this will work even regardless if its a D800 or D802?
Geordie Affy said:
Cheers for this...looking at possibly buying it soon. So I guess this will work even regardless if its a D800 or D802?
Click to expand...
Click to collapse
Yay I'm happy it could help anybody!
Yes it should, but it depends on which software version your D800 comes with. If towelroot doesn't work, IOroot or Stumproot should work Try this out when you get it - if it doesn't work, quote this message (so that I get a mail) and let me know.
Will do cheers. Yeah looking at buying a D802 from Hong Kong hy the end of this month, so no idea what kind of software its going to come with [emoji53]. Plus I want to install the G3 ROM onto it pretty much straightaway. Never rooted before but seems fairly straight forward.
should point out that autorec is for kitkat only afaik
also towelroot doesn't work on some of the later kitkat roms, but you can use 'stump' root instead
meangreenie said:
should point out that autorec is for kitkat only afaik
also towelroot doesn't work on some of the later kitkat roms, but you can use 'stump' root instead
Click to expand...
Click to collapse
Thanks for your input. I think I covered the towelroot part in my response to geordie. I'll edit the op tomorrow.
vPro97 said:
Thanks for your input. I think I covered the towelroot part in my response to geordie. I'll edit the op tomorrow.
Click to expand...
Click to collapse
Yeah I think towelroot wont work for me, reading other threads with those who have D802 Internation Verision. IOroot it is then. Can't wait to mess about with it - will probs mess it up somehow haha but atleast I have awesome XDA guys to fall back on
Sent via Note 10.1 2014 Edition on Tapatalk
Geordie Affy said:
Yeah I think towelroot wont work for me, reading other threads with those who have D802 Internation Verision. IOroot it is then. Can't wait to mess about with it - will probs mess it up somehow haha but atleast I have awesome XDA guys to fall back on
Sent via Note 10.1 2014 Edition on Tapatalk
Click to expand...
Click to collapse
If you're getting a D802 you shouldn't worry one bit. Even the latest 20F software can be rooted by towelroot!
OP Updated with the new 20G update in mind.
vPro97 said:
OP Updated with the new 20G update in mind.
Click to expand...
Click to collapse
Cheers man, going to order my G2 next week.
Sent via Note 10.1 2014 Edition on Tapatalk
Geordie Affy said:
Cheers man, going to order my G2 next week.
Sent via Note 10.1 2014 Edition on Tapatalk
Click to expand...
Click to collapse
Great, looking forwards to that!
Towelroot does not show ROOTED in either dialer status RCT check or Download mode!
Yup it worked for me.
Ofcourse, I didn't take the root too far, only used it for the following:
Install SuperSU
Install Greenify/WLD/G2 Xposed
Later on, wanted to use warranty, and was a lil worried, but it seems undetectable, especially since I've deleted SuperSU and Xposed..
I did not:
Install custom recovery
Install custom ROM
So, anyone else considering using towelroot, but hesitating because of the potential warranty implications, this should help make up ur mind..
This thread is what i am looking for so THANKS alot OP. Really helped us noobs. Can You do TuTs(noob friendly) on 'How to install custom roms using Autorec' or kk based ROms or kernels to LP based roms and kernels etc kinda like that flashing basebands and all for LG g2 D802 ? Cheers m8
meangreenie said:
should point out that autorec is for kitkat only afaik
Click to expand...
Click to collapse
That is incorrect, AutoRec is also for Lollipop, I used it to install TWRP on my LS980
PimpMy5Ton said:
That is incorrect, AutoRec is also for Lollipop, I used it to install TWRP on my LS980
Click to expand...
Click to collapse
I have the same device. I want to get custom recovery. ... My its new. Can you help me?
As the name implies this is a stock rooted Android 5.0.1 Lollipop ROM! Encryption is turned off by default!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Now in Odex and De-odex flavors!
100% Stock! Not AOSP! Gapps come installed. Its stock!
Powered by SuperSU
Busybox!
FSTRIM on install!
init.d Support!
Free Tether Hack for most carriers
Decrypted boot.img! (May require User Data Wipe). Can be re-encrypted!
No other edits
Q and A - Read it!
Q1. What are the prerequisites to flash this?
A. You must be unlocked with TWRP recovery and latest 5.0.1 based firmware. Other recoveries may work but are not supported.
Q2. I got TWRP and I am unlocked, where do I get the firmware?
A. Post #3!
Q3. I flashed this ROM and it still says the phone is encrypted! Why?
A. The ROM will not decrypt the phone on its own. To do that you need to pull everything off storage (if you want to keep it!) and then do a "/data" wipe in Recovery. Then when you reboot you will be decrypted and can copy over what you want!
Q4. Who is this ROM for?
A. Its for the Home-brew enthusiast that wants to make a ROM for themselves. Its for developers that want to build a ROM for the community but may not have access to a complete untouched file set. Its for that guy that forgot to make a Nandroid back up!
Q5. Who is this ROM not for?
A. Crack Flashers. You will not get a flash high from this ROM. Its stock rooted!
Q6. Why doesn't it have any mods? All the other ROMS have xxxxx
A. Its a stock ROM!
Q7. Is the tether hacked?
A. Yes, It should be...
Q8. Can I still enable Encryption?
A. Yep!
Q9. OMG, the Carrier files downloaded!
A. What all did you expect its a Stock ROM!
Q10. Thanks for making this ROM for us! How can I contribute without any low level knowledge of Android?
A. Simple! Make a small (or large) donation to the donate link. Alternatively if you have decent shaped, newer high end, equipment you can spare that would be great too! We can spread the love to other devices!
Thanks
@Chainfire for root!
@Stericson for busybox!
@Cybertronicz for tether hack!
@WugFresh for his un-encrypted boot image which I "diffed" to find out how to decrypt!
@Flar2 for init.d support which I "diffed" to find out how to add properly!
@joeldroid for his de-odex tool HERE!
Instructions
Unlock Boot-loader
Install custom recovery
Copy ROM to storage
Factory reset
Flash it
Profit
Please hit the Thanks button and rate the thread 5 stars!
Its easy to do and you will feel better for doing it!
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed
XDA:DevDB Information
[ROM][1/10/15] - Stock Rooted 5.0.1 LRX22 -| Stock | Root | Decrypt | Odex / DeOdex|-, ROM for the Nexus 6
Contributors
scrosler
Source Code: https://android.googlesource.com/kernel/msm/+/android-msm-shamu-3.10-lollipop-release
ROM OS Version: Lollipop
ROM Firmware Required: Latest 5.0.1 Firmware
Based On: Stock Google
Version Information
Status: Stable
Stable Release Date: 2015-01-10
Created 2014-12-22
Last Updated 2017-11-11
Change Log
v2 - 1/10/2015
Added init.d support so no need for add ons
Added a full de-odex version
v1 - 12/21/2014
First release
Additions!
Stock build.prop for those that could have issues tethering... Attached!
Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Hit Thanks!
Download the latest Firmware and Radio HERE!
Pre-requisites:
Windows: None, I included the ADB and fastboot files for you. However must have proper drivers installed. If you unlocked it then you have them.
Linux / Mac: Must have ADB and Fastboot installed. More so fastboot.
Install Instructions - Windows
Unzip to desktop
Put phone in boot-loader mode
Run batch file
Wait until completion
Verify image version for bootloader: bootloader-shamu-moto-apq8084-71.05
Verify Image version for radio: radio radio-shamu-d4.0-9625-02.55.04
Reboot start phone
Profit!
Install Instructions - Linux / Mac
Unzip to desktop
Put phone in boot-loader mode
Enter in a command prompt "fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img"
Wait until completion
fastboot reboot-bootloader
Wait until completion
fastboot flash radio radio-shamu-d4.0-9625-02.55.04.img
Wait until completion
fastboot reboot-bootloader
Verify image versions as noted above
Reboot start phone
Profit!
This is perfect. I love seeing Scrosler around here.
Sent from my Nexus 6 using XDA Free mobile app
The calm before the cleanrom storm. I know how this works stock rooted first then building cleanrom off this base . I've seen this before lol jk. Great I've been waiting to have a flashable stock rooted ROM other than Google's image.
Sent from my Nexus 6 using Tapatalk
flyinj54 said:
The calm before the cleanrom storm. I know how this works stock rooted first then building cleanrom off this base . I've seen this before lol jk. Great I've been waiting to have a flashable stock rooted ROM other than Google's image.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Sir, you know how I think :highfive:
Edit: Am I that predictable? lol
Geez I go out to neighbors for a few hours of Xmas cheer and miss this! Downloading now!
Sent from my Nexus 6 using XDA Free mobile app
Many thanks! I'm that guy that forgot to do a Nandroid of Stock.
Probably a dumb question but I'm on stock 5.0.rooted.recovery.and decrypted. Can I flash this over that setup? Just curious because you mentioned I needed 5.0.1 firmware.
TexasRules777 said:
Probably a dumb question but I'm on stock 5.0.rooted.recovery.and decrypted. Can I flash this over that setup? Just curious because you mentioned I needed 5.0.1 firmware.
Click to expand...
Click to collapse
It would prolly be best if you flash boot'ed the firmware... But reality tells me it prolly wont matter.
scrosler said:
It would prolly be best if you flash boot'ed the firmware... But reality tells me it prolly wont matter.
Click to expand...
Click to collapse
If i am already decrypted, do i have to worry about a data wipe? Can I remove the decrypted boot img? If so, how? Thanks
nhpctech said:
If i am already decrypted, do i have to worry about a data wipe? Can I remove the decrypted boot img? If so, how? Thanks
Click to expand...
Click to collapse
You can remove the decrypted boot.img.
Just unzip the file using 7zip or something simipar and then rezip it. That's what I do except that I remove the decrypted boot.img and replace it with the stock boot.img since I'm still encrypted.
Followed on gs3 then gs4 then note 3 glad to see you on Nexus !! Thanks scrosler !!
---------- Post added at 02:52 AM ---------- Previous post was at 02:51 AM ----------
And one max
rebretz000 said:
You can remove the decrypted boot.img.
Just unzip the file using 7zip or something simipar and then rezip it. That's what I do except that I remove the decrypted boot.img and replace it with the stock boot.img since I'm still encrypted.
Click to expand...
Click to collapse
Thank you! Will give that a try!
scrosler said:
It would prolly be best if you flash boot'ed the firmware... But reality tells me it prolly wont matter.
Click to expand...
Click to collapse
Worked like a charm. Thanks man!
TexasRules777 said:
Worked like a charm. Thanks man!
Click to expand...
Click to collapse
Worked for me too without issues (coming from 5.0)
Surprised by AT&T apps after flashing. Is AT&T paying you too.
Thank you for this and can't wait for CleanRoms.
Thanks for posting this, i was wondering when someone was gonna do it. It's usually one of the first type of roms to pop up when a new phone is released.
Well hello sir! Glad you came over to the Nexus 6 game! Had your ROMs during the G2 days! Gonna flash yours once again!
xterra91 said:
Followed on gs3 then gs4 then note 3 glad to see you on Nexus !! Thanks scrosler !!
---------- Post added at 02:52 AM ---------- Previous post was at 02:51 AM ----------
And one max
Click to expand...
Click to collapse
DAMN! We call that stalking where I am from!
Just kidding!
Glad to see you here!
martinezma99 said:
Worked for me too without issues (coming from 5.0)
Surprised by AT&T apps after flashing. Is AT&T paying you too.
Thank you for this and can't wait for CleanRoms.
Click to expand...
Click to collapse
NO, that is your OEM partition in action. You could edit out part of the build prop to stop that from happening but... I wanted to keep it as close to stock as I could sans Root, Busybox, and Decryption. Oh and tether!
eruscool said:
Thanks for posting this, i was wondering when someone was gonna do it. It's usually one of the first type of roms to pop up when a new phone is released.
Click to expand...
Click to collapse
Yeah, I learned that the stock based ROMS for this phone are tricky! I see why no one has done one.
I restored my stock, rooted 5.0 backup and flashed this on top of it and it works great!
Warning this is engboot, meaning its not made to be used on day to day basis you may run into some issues. Hopefully we can fix them as we go!
Also do not update supersu through playstore untill we are for sure that it wont mess anything up
Notice from @Chainfire:
Chainfire said:
I'm just going to leave this here...
SuperSU-v2.74-2-S7QC.zip
You will need:
- Engineering boot images
- Patched version of Odin3 (only AT&T models ?)
- Extract files, and run root.bat with adb on the path
This version of SuperSU is not officially supported. I recommend against updating the APK from the Play Store, or otherwise updating the binaries, unless someone knowledgable has tried before you and confirmed it worked.
If it breaks, you get to keep all the pieces.
Click to expand...
Click to collapse
First of all thanks to @Chainfire for helping achieve su and @princecomsy for giving me the odin file and engboot
I take no responsibility for anything that happens to your device, same goes for everyone that helped.
First file you will need is here http://d-h.st/gsDA
This is special Odin to bypass SHA-256 made by Princecosmy
Second file you will need is
G935A http://d-h.st/lQY8
G930A http://d-h.st/aK2A
This is the engboot. Using @billas since its already uploaded.
Basically once you have these two files open up the odin included and place the .tar in the ap section should only take a few seconds to flash.
After you are back up download SuperSU made for our phone from here https://download.chainfire.eu/968/SuperSU/SuperSU-v2.74-2-S7QC.zip
Extract the files to a folder.
Here it may get a bit tricky for some.
Go to your adb install location. Open a command window where your adb files are located.
Change the directory to your supersu folder location from earlier, and run the root.bat from the cmd.
I am not very good at instructions as this is my first time doing anything like this.
For the bounty id prefer if you just donate to https://secure.savethechildren.org/....C01C/Global_Action_Fund/apps/ka/sd/donor.asp
Makes more of a lasting impact then what i could do with any of it.
Again thank you to everyone who helped!
We made it fam!
If you are successful after rooting and can give better instructions please let me know!
Thanks a lot.....you guys are awesome...
Thanks! I'll be trying this for T-Mobile varient. But can someone please mirror the Speedyshare links? I can't download them for some reason. Popup blockers perhaps?
Binary100100 said:
Thanks! I'll be trying this for T-Mobile varient. But can someone please mirror the Speedyshare links? I can't download them for some reason. Popup blockers perhaps?
Click to expand...
Click to collapse
Getting a direct link from @princecomsy currently should have odin and file together
br3w3r said:
Getting a direct link from @princecomsy currently should have odin and file together
Click to expand...
Click to collapse
That'll be awesome. Thank you so much for your hard work.
Does this trip knox? Can you please explain what this does and what to expect?
What problems might engboot bring? Will this method work with Verizon?
JAYNO20 said:
What problems might engboot bring? Will this method work with Verizon?
Click to expand...
Click to collapse
Nothing to major to me wifi may remove password after boot and im not 100 percent sure.
It should in theory work.
Can we flash TWRP after this ? And when the Bootload unlock will u guy work on it ?
Demonith said:
Can we flash TWRP after this ? And when the Bootload unlock will u guy work on it ?
Click to expand...
Click to collapse
Hey hey let's not get ahead of ourselves . . .
Good job , by the way Br3w3r !
Will this work for the ATT S7 Edge? When you say not to use on day to day basis, do you do root stuff then revert back to regular kernel?
Sent from my SAMSUNG-SM-G935A using Tapatalk
stew1411 said:
Will this work for the ATT S7 Edge? When you say not to use on day to day basis, do you do root stuff then revert back to regular kernel?
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
You can use it on a day to day basis. Dont try going back it will remove what you have done. The issues if there are any are minor.
And yes it is for ATT S7 edge.
I have a few questions here.
What exactly is going on with this root process? Is it installing a recovery? Will this trip knox? I assume Samsung Pay won't work anymore? Can we finally used xposed? If so, which version?
How can one revert if we felt the need to?
I feel so sorry for @br3w3r for having to deal with all of the Q&A after all of this hard work. LOL! But seriously, thanks for all of this.
br3w3r said:
Warning this is engboot, meaning its not made to be used on day to day basis you may run into some issues. Hopefully we can fix them as we go!
First of all thanks to @Chainfire for helping achieve su and Princecosmy for giving me the odin file and engboot
I take no responsibility for anything that happens to your device, same goes for everyone that helped.
First file you will need is here http://www.speedyshare.com/P3ND3/odin.zip
This is special Odin to bypass SHA-256 made by Princecosmy
Second file you will need is http://www.speedyshare.com/M4V94/g935a.tar
This is the engboot. I do not know who leaked it out but @Princecosmywas the one who got it working.
Basically once you have these two files open up the odin included and place the .tar in the ap section should only take a few seconds to flash.
After you are back up download SuperSU made for our phone from here https://download.chainfire.eu/968/SuperSU/SuperSU-v2.74-2-S7QC.zip
Extract the files to a folder.
Here it may get a bit tricky for some.
Go to your adb install location. Open a command window where your adb files are located.
Change the directory to your supersu folder location from earlier, and run the root.bat from the cmd.
I am not very good at instructions as this is my first time doing anything like this.
Bounty info: [email protected] / Paypal please
Again thank you to everyone who helped!
We made it fam!
If you are successful after rooting and can give better instructions please let me know!
Click to expand...
Click to collapse
Who is the bounty going to? As much as I appreciate your efforts I want to donate to all that made it happen.
Will our phones lag? I read on another thread that engboot causes our phone to lag.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Please if anyone gets it to work on the T-Mobile variant..... let us know.... thanks...
Sent from my unrooted #BootLoaderGate SM-G935T
stew1411 said:
Will our phones lag? I read on another thread that engboot causes our phone to lag.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
I havent experienced any.
2swizzle said:
Who is the bounty going to? As much as I appreciate your efforts I want to donate to all that made it happen.
Click to expand...
Click to collapse
The email is for @princecomsy, he is going to get it then split with me. Chainfire said he did not want bounty. Even though i feel he deserves it.
Everyone slowwwww down. Root was just established. As for knox, Verizon, and any other questions hold tight. I'm installing it on my Verizon s7 now
2swizzle said:
Everyone slowwwww down. Root was just established. As for knox, Verizon, and any other questions hold tight. I'm installing it on my Verizon s7 now
Click to expand...
Click to collapse
I'll be installing soon too. But I'm doing something first.
While downloading G935TUVS3APD8_G935TTMB3APD8_TMB firmware (just in case) I'm also backing everything up with Smart Switch first. Just in case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
br3w3r said:
The email is for @princecomsy, he is going to get it then split with me. Chainfire said he did not want bounty. Even though i feel he deserves it.
Click to expand...
Click to collapse
My donation will be forthcoming after a T-Mobile variant is rooted without a problem....
Sent from my unrooted #BootLoaderGate SM-G935T