Is anyone planning on putting extra glass over the cameras? This shouldn't effect the photo quality or AF, right? Any recommended brands out there? Or are you just relying on the raised bezel for whatever case your're using to protect the camera array?
I'll only protect mine with a ringke case, although I'm worried about possible scratches in the future.
The usual go to case for my phones, Spigen Tough Armor, this time comes with only a thin lip over the camera lens and screen. There is like a 0.1mm clearance once I installed dbrand camera skin. I am disappointed in the casing. The past 2 series (Samsung Note 10+ and iPhone 11 Pro Max) had thick camera lens clearance (almost like 0.5cm).
im worried that it may screw up the TOF sensor or somehow mess with the quality of the pics...
anyone have experience on previous phones?
I protect my camera lens with the gadgetshieldz skin or camera protector, The camera protector protects my camera lens from scratches.
I have a dbrand skin on it that covers everything but the actual surface needed for pictures. Don't think I need more than that. Also after watching all the drop test the camera is the last thing that will break or stop working.
They have "tempered glass" screen protectors on Amazon for preorder. There is a hole cut out for the flash and mic. I know it's not quite the same but I've had a tempered glass screen protector on my gropro without any issues.
The camera glass is so big on the s20 ultra, it feels like it needs a screen protector. For $10 on Amazon it might be worth trying out.
elracing21 said:
I have a dbrand skin on it that covers everything but the actual surface needed for pictures. Don't think I need more than that. Also after watching all the drop test the camera is the last thing that will break or stop working.
Click to expand...
Click to collapse
Yup, I too have Dbrand skin on the camera bump to prevent scratches. Works well and looks great!
mmafighter077 said:
They have "tempered glass" screen protectors on Amazon for preorder. There is a hole cut out for the flash and mic. I know it's not quite the same but I've had a tempered glass screen protector on my gropro without any issues.
The camera glass is so big on the s20 ultra, it feels like it needs a screen protector. For $10 on Amazon it might be worth trying out.
Click to expand...
Click to collapse
Only problem I'm concerned with is the auto focus having even more issues with an extra layer of glass.
sabesh said:
Yup, I too have Dbrand skin on the camera bump to prevent scratches. Works well and looks great!
Click to expand...
Click to collapse
Yeah I rock my phones ceaseless but have the entire back with dbrand and a dome shield on the screen. I feel really good about the look and feel of my device.
Just applied the tempered glass screen protector for my phone. It looks good without flash. But when I use the flash, the shot looks hazy. This is going to be a no go for the tempered glass screen protector. See the picture I attached.
How do I record calls in samsung s20 Ultra.Can some one please help ?
How do I record calls in samsung s20 Ultra.Can some one please help ?
Be best if someone did a glass lens cover that had cutouts for every camera / sensor - rather than risking performance issues by covering them.
Does anyone know of an option like this? - All the ones I can see only have the cutout the for the flash or flash and TOF .. but not the cameras.
Other option is to use a transparent skin i suppose..
Spigen Neo-Hybrid.
this one is pretty coolhttp://imgur.com/a/h5RWQAp
Otterbox defender pro. 44 at walmart. Best money I spent. Shockingly not too bulky.
Sent from my SM-G988U1 using Tapatalk
I got one with the flash & mic cutout & it works great, not noticing any auto focus issues or flash diffusion. They're pretty thin and scratch resistant I'd say its worth giving it a go.
Kjam33 said:
I got one with the flash & mic cutout & it works great, not noticing any auto focus issues or flash diffusion. They're pretty thin and scratch resistant I'd say its worth giving it a go.
Click to expand...
Click to collapse
Got a link?
I got the ESR one
I've got a Mocolo 9H hardness lens protector, works perfectly
I found this and installed it to get a little extra protection for the Camera Glass - the fit is good - installs easy and I have not noticed any issues when using the Flash. It does require that youi carefully place the screen protector on the camera bump (glass) lining up the holes correctly - but they do give you four screen protectors if the first attempt doesn't work. You can find them here: https://www.amazon.com/gp/product/B08546Q3LJ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Related
What is the best (quality and cost) tempered glass screen protector for the G3? I previously had an M8 and bought my first ever tempered glass screen protector, Zagg Glass. It was fantastic, looked and felt like there was nothing there and the application process took 20 seconds. However, I'm sure there are other ones out there that are just as good quality wise but far less expensive. Thanks.
I use this one myself and like it a lot. Nice fit, ultra thin, rounded edges, crystal clear and a 9 hardness. Very satisfied with this one.
Orzly
Just perfect
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Can you please use the long thread already dedicated to this tooic instead of making a New one please...
Please search before making new threads
Sent from my LG-D851 using XDA Free mobile app
I recommend Bepak H+ have used it on my G3 and HTC M8
My nano.tr was great for about 3 days. Now its coming up in 2 places
I refuse to buy another Spigen Nano t.r after 5 of them with countless issues. Ive had them stop sticking for no reason, crack without ever dropping my phone and the list goes on.
I bought a Mime ghost glass and its a huge improvement. It also only cost 28 with free shipping from their website. Great screen protector especially compared to Spigen.
pic
fullyflaredfred said:
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Click to expand...
Click to collapse
Any chance you could post a pic, I ordered one and am anxious to see what it looks like exactly.
I use zagg, and it's amazing. I also have the circle wireless case, and the front flap was not affected in any way.
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
are there any tempered glass screen protector that does not leave any fingerprint behind?
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
If there were I would assume the same layer/technique would be applied on the original Gorilla Glass screen as well.
Some do claim they repel finger prints, that's usually just marketing BS though
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I've been using a Tech Armor glass screen saver for the last few days and it shows fewer fingerprints than the stock screen. It feels smoother than the regular screen which may have something to do with it. It still gets prints, just not as many and they seem to wipe off easier. Very please with it for $10.
jksigmon said:
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
Click to expand...
Click to collapse
this looks like it only has a cutout for the speaker grille?
[email protected] said:
this looks like it only has a cutout for the speaker grille?
Click to expand...
Click to collapse
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
jksigmon said:
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
Click to expand...
Click to collapse
I bought this protector last night and the slim guard case the other day i think ill be good to go! ill post picutres:good:
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I bought the one carried in the VZW stores and it really cut down on the fingerprint / smudges - I could really tell the difference. But that protector was .4mm thickness and touch sensitivity became an issue for me. So I bought the .2mm iCarez protector. The thickness was just right, but the oleophobic properties are not as good as the VZW protector.
As always, YMMV.
Based on the reviews in this thread I ordered the pThink protector (Free Prime 2-Day shipping FTMFW).
I can't say enough good stuff about this screen protector. It is available on Amazon for around $11(with free prime shipping if you have it). There are a variety of good tempered glass screen protectors. Most of them simply notch out the top near where the speaker, light sensor and proximity sensor are located. This one has a perfectly aligned oval shaped cutout giving it a much more OEM looking appearance. Like most, the edges are pleasantly rounded.
The package is straight forward, complete with requisite chinglish on the outside. The package is generic, saying it includes a 'homer(sic) button' cover. Which doesn't make sense, and sure enough it doesn't include. Opening it up, you see all of the included materials. Nothing outstanding here other than the actual instructions seem to be in normal English! I didn't look closely but I didn't see any chinglish.
Installation is a breeze but good prep ensures success. I cleaned the screen extensively to remove all traces of oil and dust. Since I am a chemist I used chloroform to degrease the screen. I also used it to degrease my fingers (not something I recommend but it works). Once the screen was clean, I applied the tempered glass screen protector by VERY VERY VERY gently lowering it by its sides. I can't stress the very gently enough. If you do it gentle enough it will rest just above the surface and you can use your fingernail to maneuver the screen protector into perfect position. Then just touch down on the screen and watch the "bubble" of bonding spread across the screen, it just drives the air out. The rigidity of the screen protector results in a perfect bubble-free finish. I couldn't believe how easy it was. Once the screen protector was on, I wiped it down with the included microfiber cloth.
Initial impressions? Damn! It's truly crystal clear, I can't seem to find any visual distortion. Touch feels slightly changed due to the oleophobic surface but its clearly glass and feels like a touchscreen. There is ZERO effect on the touchscreen performance. Also, the oleophobic surface DRAMATICALLY reduces the amount of smudges, it doesn't prevent them but its a huge reduction. I have a few pics of the package before installation. Once I cleaned the screen, I lost my camera (my phone is the camera so I couldn't use it). The edges of the screen protector are within fractions of a mm of the display edges. This is necessary to make installation a little easier and to prevent bubbles. I truly could NOT be happier!
I'm really happy with a Bepak one. Rounded edges, smooth, and feels really great to touch. No scratches at all till now with some rough usage.
Although reading the reviews about the pThink one, I'm going to give that a try when something happens to the current Bepak one.
Hadn't seen a thread yet for glass screen protectors, but I wanted to share the one I bought on Amazon and received today. I think it looks great. It has a nice feel and lays down on all of the edges. There is an ever so slight gap to the edge of the phone, but I would assume that that would help if you wanted to rock a case. I'm going naked for now, but I have ordered a black matte slickwrap that I'm excited to apply. I will definitely start a thread as soon as that comes in. Here's the link to the screen protector. I almost got the DMax Armor one, but I went with the KUGI one because the picture only had a cutout for the front facing camera. Turns out the cutout is larger than the picture, but the cutout is uniform and I like it just fine.
http://www.amazon.com/ONETOUCH-prot...sr=1-3&keywords=idol+3+glass+screen+protector
Looks good. I have one coming from ebay. We shall see how that looks.
I got mine amazon and it looks fine.
Any issues installing the glass protector? Is it better to take off the case or can it be applied with it on? Some posts about glass protectors ended up in the thread about what case people are using. FYI.
I purchased the Nillkin tempered glass screen protector from here: http://www.ebay.com/itm/161735243879?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
If you look at the pictures for the screen protector you will see that the slot cut out at top does NOT line up with the camera......is that normal? Look at the last pic here: http://www.aliexpress.com/item-img/...tive-film-for-Alcatel-Idol-3/32371525568.html
I applied it and it seems to work fine...just thought it was strange the cutout didn't line up. *shrug*
The cutout is for the proximity sensor only. I like the idea of added protection to the camera. How are your pictures after the install?
thex said:
The cutout is for the proximity sensor only. I like the idea of added protection to the camera. How are your pictures after the install?
Click to expand...
Click to collapse
Seem fine although honestly I don't use the front facing camera all that often...a "selfie" person I'm not.
I just received one from Amazon that's a dollar cheaper than the one lordlittlebrooks posted and I love it! Fits great and was super easy to install.
http://www.amazon.com/gp/product/B010FYFGZO?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Could anyone with one of the tempered glass protectors let us know how they are? Does it change the quality of the display in any way? Are the whites still as white? Is there more friction when swiping your finger on the screen?
Some reviews have suggested that there's a loss of response with these protectors in place. Anyone seeing that?
maigre said:
Could anyone with one of the tempered glass protectors let us know how they are? Does it change the quality of the display in any way? Are the whites still as white? Is there more friction when swiping your finger on the screen?
Some reviews have suggested that there's a loss of response with these protectors in place. Anyone seeing that?
Click to expand...
Click to collapse
I haven't noticed any of those issues with the one I have. I was worried that it would hinder the image quality of the phone but I haven't observed that to be the case. I also don't notice any latency issues with it on. Also, I feel like it does a better job of resisting finger prints than the original screen. Over-all, I'm very happy I purchased one.
I felt like the screen was brighter and also like how resistant it is to fingerprints. It seemed to be to be more responsive to taps, swipes and drags. It was my first tempered glass screen protector and I promptly went out and ordered some for my other devices.
received mine from here : http://www.ebay.com/itm/15170519890...49&var=450907160802&ssPageName=STRK:MEBIDX:IT
just make sure to chose the 1pc tempered glass
no problem with sensors or camera, took me less than one minute to install
keyra74 said:
received mine from here : http://www.ebay.com/itm/15170519890...49&var=450907160802&ssPageName=STRK:MEBIDX:IT
just make sure to chose the 1pc tempered glass
no problem with sensors or camera, took me less than one minute to install
Click to expand...
Click to collapse
The hardness on that one is only 4H as opposed to the nillkin 9H for a similar price.
http://www.ebay.com/itm/NEW-Nillkin...-Idol-3-5-5-/161735243879?hash=item25a82bf867
were u drunk when u quoted me it's a 9H : )
http://imgur.com/31NXuau
Tempered Glass (Glass Material) Specification:
Material: Tempered Glass with 99.8 % Clarity
Hardness: Super high definition clarity with Maximum protection (9H) from scratches to high impact drops
keyra74 said:
were u drunk when u quoted me it's a 9H : )
http://imgur.com/31NXuau
Tempered Glass (Glass Material) Specification:
Material: Tempered Glass with 99.8 % Clarity
Hardness: Super high definition clarity with Maximum protection (9H) from scratches to high impact drops
Click to expand...
Click to collapse
No I wasn't. I do however realize the 4h I read was for the pet film. In that event whichever one is cheapest would do.
totalrecarl said:
I just received one from Amazon that's a dollar cheaper than the one lordlittlebrooks posted and I love it! Fits great and was super easy to install.
http://www.amazon.com/gp/product/B010FYFGZO?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
That is the same one I bought from Ebay for $5.99 but it looks like they just dropped the price to $4.99 now (direct from Hapurs.) http://www.ebay.com/itm/111702012356?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
keyra74 said:
received mine from here : http://www.ebay.com/itm/15170519890...49&var=450907160802&ssPageName=STRK:MEBIDX:IT
just make sure to chose the 1pc tempered glass
no problem with sensors or camera, took me less than one minute to install
Click to expand...
Click to collapse
Thanks!! I bought this one too and installed it using these instructions. It looks just like lordlittlebrooks's first post photos, it fits nicely although I wish it was flush with the whole screen. But hey, it shipped fast and the price was right.
David C.
Given that the screen is already raised up a bit by design, I'd be concerned that the thickness of the glass protector would make it stick up even more, and give an abrupt edge to it.
Never had a problem w/ the hard plastic/film ones; just expect to have to throw away and replace them every few months.
Bought the fusion crystal case from Ringke:
GOOD:
- Completely transparent to show off Z5P's sexy back
- Grip is pretty solid
- Caps for both the headphone jack and the USB port provides additional protection for when you have that occasional dip in the pool.
- Looks premium; doesn't look cheap
- Has these four little bumpers at the back to prevent the case from being scratched when put on a flat surface
- Volume rocker and power rubbers can be easily pressed
- Scratch-resistant (so far)
- Comes with free screen protectors for both front and back
BAD:
- Fingerprint magnet (so you need to wash it after a hard day's use)
How is that and where did you get it from?
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Lad said:
How is that and where did you get it from?
Click to expand...
Click to collapse
i'm from canada so i bought it at amazon.
kcteun said:
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Click to expand...
Click to collapse
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
when i put on the back protector is clear as i can still see the mirror, after removing the top layer sticker which is part (2) my back protector goes matte. i suddenly feel so disappointed. the matte back looks nice but i still prefer the mirror back. im struggling should i remove the back protector as it is a very good quality and when i stick it on theres very little bubble and easy to take out those bubble.
Lawliet918 said:
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
Click to expand...
Click to collapse
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
I also have this case. My Chrome z5p looks gorgeous in this. Quality
Transparent with 1 year
Enviado de meu E6853 usando Tapatalk
Hi everyone, I am using Ringke Fusion Smoke Black for my Sony Xperia Z5 Premium. I have selected smoke black after reading some online reviews & some fitting issue, as after some time clear one gets yellowing. I am happy with smoke black.
ill be getting the smoked black one in the mail soon will report back with a small review
do this case makes the phone a lot hotter ?
otaolaurruchi said:
do this case makes the phone a lot hotter ?
Click to expand...
Click to collapse
No it does not make the phone hotter
Too thick for my taste...
Sent from my Xperia Z5 Premium!
Got a scratch 1st day... And I have a too big gap at the back around the cam so dust comes in between the case and the phone. Annoying on a black phone... Good fit besides that
Infraaa said:
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
Click to expand...
Click to collapse
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
diji1 said:
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
Click to expand...
Click to collapse
Got mine yesterday, smoke black, and my pone looks great. You have to use the back cover and everything will work and look as intended. Good qualiy case but a bit pricy
This is the best case for z5p. Its not over protected, but just enough. Also fits perfect.
Huge fan of Ringke Fusion cases in general, as I used them on few of my past phones. I will go as far as saying this is probably the best case of this clear/hybrid type in general, beating even the Spigen Ultra Hybrid which is quite hyped case. I find Ringe Fusion extremely precisely built, with perfect cutouts, and also the button cover sections are very easy to press, and you perfectly feel the "click" underneath. One more thing I like, is that the surface is so gentle to wipe, and not sticky at all, like some kind of oleophobic coating for plastic is there. I'm using the smoke black version on my Z5P, and I love it, along with matt protector for back side which takes away some of the mirror effect, but also reduces smudges and dust visibility.
Sent from my E6833 using Tapatalk
I am using this too, protection is superb, design details are satisfying, well considerate,
Something like this with a edge only tpu case, a glass rear protector and a glass camera lens protector.
Not sure how well it would work?
https://www.amazon.co.uk/dp/B07CLF35GG/
twe69 said:
Something like this with a edge only tpu case, a glass rear protector and a glass camera lens protector.
Not sure how well it would work?
https://www.amazon.co.uk/dp/B07CLF35GG/
Click to expand...
Click to collapse
Give it a try, I would.... But it doesn't get shipped to the Netherlands.
I've bought 1 from ebay, waiting it to ship over
film protector
I ordered a pack of 6 film protectors when the arrived their quite stiff easy to apply but don't cover the whoe of the back, also got a pack of tempered glass camera lens protectors, so their covered, and I use a Huawei p20 pro car case and tempered glass front protector
twe69 said:
Something like this with a edge only tpu case, a glass rear protector and a glass camera lens protector.
Not sure how well it would work?
https://www.amazon.co.uk/dp/B07CLF35GG/
Click to expand...
Click to collapse
I have this exact one. It's quite thick rubber around the edges, so feels quite strong.
It looks quite cheap though, and has a bit of Chinglish on the back - instead of "Tempered glass", they've written "Tempering glass"!!
krs360 said:
I have this exact one. It's quite thick rubber around the edges, so feels quite strong.
It looks quite cheap though, and has a bit of Chinglish on the back - instead of "Tempered glass", they've written "Tempering glass"!!
Click to expand...
Click to collapse
Lol thanks for the update. Might just stick to the case I bought and glass screen protector. Seems like the best option for me with enough protection.
Hi, I am getting the S23 ultra soon and was wondering, am I best leaving Samsung's film screen protector on, or will this not really offer much protection?
Am I best taking this off and putting my own?
I was looking at these UV glass ones, which I don't really have experience with, they are all a little on the dear side in comparison to the glass ones that are ready to stick.
I tend to prefer glass as it feels like more protection and touch / fingerprint still works fine and also tends not to suffer air bubbles as much.
Regards
James
You dont get a screen protector on it when it arrives
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
s3fan said:
You dont get a screen protector on it when it arrives
Click to expand...
Click to collapse
That's a bummer, they have as far as I know, at least on the flagships since the S10
Sprov said:
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
Click to expand...
Click to collapse
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Getting on my high horse here to ***** about the hypocrisy around "saving the planet" by not providing a screen protector....it's all virtues signaling and real cheap ass practice.
Look what resulted from buying a screen protector from Scamazon (add gas burned, electricity, etc ) to see the "savings"
dl12345 said:
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Click to expand...
Click to collapse
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
robbo1947 said:
That's a bummer, they have as far as I know, at least on the flagships since the S10
Click to expand...
Click to collapse
yeah it looks like they stopped including them with S22 Ultra. My S21U came with a screen protector and the S22U didn't. I'm from EU if it matters.
Sprov said:
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
Click to expand...
Click to collapse
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
kevindd992002 said:
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
Click to expand...
Click to collapse
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
who cares? said:
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
Click to expand...
Click to collapse
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Thanks for everyone's replies, after a lot of fear, hassle, and a bit of a loss of money I decided on a film protector which is working 100% fine.
Not sure if I just picked rubbish glass screen protectors, but they caused me big issues. Neither would work with fingerprint reader and because they were hard, my original case was lifting the sides of the protector a bit, meaning touch was less sensitive.
The first glass protector I tried was UV and when it came to taking this off, that was a little scary with this brand-new phone!
Trying to peel it back off was a hard job, was very stuck and was actually cracking as I was slowly lifting it off.
So now I have a different case that doesn't affect the protector and a film protector and all seems good now
kevindd992002 said:
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Click to expand...
Click to collapse
Very little issues. Honestly it's works as well as the tpu film did I had on my s21 ultra. I wanted glass over the film on the ultra because of the pen. I wasn't sure how the pen tip would work with indenting the tpu film. I like the feel of the glass a lot better.
Before my S23U arrived I already had the case and glass ready. Didn't even power it on first, but went right away and applied this UV glass.
No issues with case causing glass come off. Glass needs to be perfectly aligned.
I did the same with my N9 that I traded in - not a scratch anywhere, although I dropped it few times and the UV glass saved it And I had N9 for full 4 years..
No issues when I took the glass off before shipping N9 back to Samsung.

After using these on my S21 Ultra, I purchased the same for my S23 Ultra and installed it today. Took about 15 minutes and extremely happy with the results. Feels like the original glass and most times don't even notice it's on. Additionally, customer support is top notch. Any issues and they send out replacements without issue. They're also available for installation support if needed.
The key is to watch the installation video and read the instructions multiple times and clean clean clean the phone.
https://www.amazon.com/dp/B0BMDLDPY6?psc=1&ref=ppx_yo2ov_dt_b_product_details
I live in Asia and use Zeelot glass screen uv protector. Fingerprints work well and didn't have issue with my case
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
_GRIZZLY_ said:
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
Click to expand...
Click to collapse
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
aureum said:
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
Click to expand...
Click to collapse
Yes, I think too about original samsung screen protector but I will buy it after receive points (about few days) thanks to buy phone in official site. Change my 3mk if I see issues but after 1 week (I know it's small period time) all is fine with case spigen tough armor.
However I don't sure that later, will not unstick because is full dimension from corner to corner with my case.
Easy wet application like similar film protectors.
Mine is 3mk Silver protection:
Folia na ekran Samsung Galaxy S23 Ultra - 3mk SilverProtection+
Antyuderzeniowa folia ochronna, wzmacnia ekran do 400%, powłoka samoregenerująca, łatwy montaż. Zabezpiecz Samsung Galaxy S23 Ultra. Oficjalny sklep producenta
sklep.3mk.pl
This is local product of my country - Poland
i use domeglass and spigen ultra hyprid clear case, because of Red Color from phone.
Its fit perfect together.