What cases did you all get for the for your S20?
Here are the few I've gotten so far
Tech21 Its nice looking, but its sort of meh seems like protection wise. Feels a little thinner than the one I had on my 11 Pro Max and Note 10, so it may end up getting returned, looks like theres complaints for the S20 Ultra due to no protection around the camera. For those who hold the bottom of the phone with the pinky finger its a little sharp
ArmadilloTek case: Its awesome! Very good protection adds a little bulk but not to much, very comfortable in the hand and very nice looking. This will most likely be my main case.
Poetic Affinity: Very awesome feeling case, comfortable in the hand, minimum bulk but feels like it has some okay drop protection. Very great clear case.
Nice case shots! Which one do you use primarily?
Pretty sure I have the first one too, Poetic one, knock off UAG sort of but I really like it for the price, only issue was it was lifting the pre-installed screen protector a bit.
I'm currently rocking the Dbrand Grip case with the teardown skin, loving how it feels, also very protective. I'll try get some pictures up shortly.
Related
Hello friends,
I thought I'd share some thoughts on the four cases I have for my Note 3. They are, from left to right: A Samsung view case which came with my phone, a Wave case by Mob:C, a Neo Hybrid case by Spigen, and a Slim Armor case also by Spigen.
First, the flip/window case. This was free when I bought my phone in Korea. It has a window and finger grooves on the side. I'm fairly certain it's an official Samsung product, but it's not very good. I only used it for about three days before buying a new case, and I noticed the following:
1. The window was already very scrathed and didn't look very good.
2. The case didn't stay shut that well.
3. The finger groove design makes it difficult to put into and remove from the pocket.
4. The build quality isn't very good. The case feels cheap and fragile.
5. It's also not a smart flip case. Would not recommend.
The second case, called the Wave by Mob:c was the first non flip case I found In Korea. I liked the drop protection this case offered, but the enormous rubbery bumpers also added a significant amount of girth to the phone. I also liked the deeply recessed camera cutout, which kept the camera well away from tabletops. The s pen cutout is also very generous, allowing for easy access. Things I dislike about this case are as follows:
1. The wave shape is perhaps intended to make the phone fit the hand better, but in reality it seems to make it worse, possibly because it makes the phone so wide.
2. The wave shape, like the fingergrooves on the flip case, tends to make this case get hung up on pockets when going in or coming out.
3. The bezel around the screen is quite shallow, making it dangerous to set the phone down face down.
This case is alright overall, but I can't really recommend it unless you're in love with the shape.
The third case is the well known Neo Hybrid from Spigen. This case arrived at the same time as the Slim Armor, as I liked both designs but wasn't sure which I'd prefer. This case is very slim and therefore doesn't feel like it would offer much protection. It's also a bit slick in the hand. The only other thing I'm not crazy about with this case is the very low bezel on the screen and the very shallow recess for the camera. It didn't offer the protection I wanted, but I still think it's an attractive design and will work perfectly for those looking for a trim case that still offers a bit of protection.
Lastly, my favorite of the four, the Slim Armor. Things I like about this case include the just deep enough bezel, the just deep enough camera recess, and the rock solid feel in the hand. It honestly feels like a suit of armor for your phone, and while it doesn't appear to offer the maximum protection you'd get from the Otterbox or similar designs, I'd still trust it to save the phone from a realistic drop. Things I don't like about it: it's quite slick in the hand, and the buttons aren't quite as easy to use as they are on the naked phone or with the other cases.
Overall, I'd highly recommend this case. The feeling in the hand is just fantastic, and the case is attractive but still minimalist.
Hope you enjoyed these mini reviews, thanks for reading.
Sent from my SM-N900K using Tapatalk
I am using the slim armor myself in slate. Absolutely love it. I also tried the neo and wasn't impressed. The outer ring didn't fit properly and the overall feel in the hand wasn't for me.
Sent from my SM-N900V using xda app-developers app
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
troyd28 said:
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
UCSB said:
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
Click to expand...
Click to collapse
I have about 5 case for my phone right now so far this spigen is the 1 that would slip out hand the most but I haven't broke it yet then I have the knock off griffin case that has protection and has grip and it's kind like the otterbox then I have some cheap 9$ one I won on a ebay bid then I have the blason one which has alot of grip then I have a caseology one but the spigen is semi tough because I dropped it once on tile floor the knockoff griffin is pretty touch I dropped it while biking on pavement and it survived surprisingly because the case was 10$ from Japan
Sent from my SM-N900T using Tapatalk
Grip seems to be overlooked sometimes when searching for the perfect case. The Tech 21 Tactical, my current case, does not have the same grip as the S5 version.
On the hunt for a thin to medium case with nice grip. Sweaty hands in the warm months and gloves in the cold ones. Considering the Incipeo Dual layer in black for the soft touch back. Had one on my old LG.
Spigen (never owned one) seems to offer some nice cases if you pick the right color. Considering the Spigen Tough Armor or the Neo Hybrid, both in black. The Neo Hybrid is a handsome case. Not sure about the quality of drop protection and grip. The Armor appears to be more robust, but how is the grip?
Would love some feedback from the community.
Thank you.
John
PS. The Zagg Glass Curve looks promising. Calling tomorrow.
I always recommend otterbox cases.
In the past they have been a little bulky and a bit slippery. Great cases. Very protective. I read the recent reviews of the S7. Looking for something that is softer. More give when you grip it. You feel it sliding or slipping and grab it and it stays.
Spigen Neo Hybrid is a nice case (have one on S7 and wife has one on S6) but doesn't match your grippy requirement. Especially not for gloves.
Sent from my SM-G930W8 using Tapatalk
Just gonna bump this first those looking. The tech 21 non tactical is very grippy.
Sent from my SM-G930T using XDA-Developers mobile app
One from Spigen does a good job
Hi,
Below a link to the case I got:
http://www.spigen.com/products/galaxy-s7-case-liquid-crystal-liquid-crystal
I was previously a user of the Samsung transparent case for S5 (don't have the name at hand but there was only one model originally from Samsung) and that one was super grippy. Made a world of a difference on smaller ships and sailing boats - you could just put it down on anything and it stayed glued to it.
The Spigen one for S7 isn't as sticky but does the job. And it's transparent so the natural silver color of the phone stays there and looks good. Both in the hands and on a table surface the case does a respectable job.
Hope this helps
Cheers,
Jakub
I have the tech21 impact clear and the evo check. The impact clear has decent grip on the sides but it is not flexible tpu-like which the evo check reminds me of. The impact clear is more hard shell on the back which is not as sticky as the evo check. Both are comfortable in the hand. Not sure about the protection level though. Thinking both may be weak for phone drops.
Seido surface case would be good for you
Grippy with details entry protection
I have used them for years
www.shopandroid.com/seidio-surface-with-metal-kickstand-case/4A123A22991.htm
I am using SGP Urban Armor,grips pretty good.
Sent from my iPhone using Tapatalk
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
Hey fellas!
I am looking for a premium looking case for my nexus 6.
My phone is white if it matters.
I did like a lot the Nilkin slim border, but its out of stock everywhere.
Also i have found this:
https://www.ebay.com/itm/Luxury-Sli...hash=item41939eb983:m:m2afeTHn0qE_nI9hygZ9iVg
Black aluminum borders.
Besides that, im looking for something that will give me a nice grip yet still make the phone look elegant and aesthetic.
Thanks!
I have that. It looks okay, but the quality is crap. I got rid of it right away.
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
I bought this case about 6mo ago, and have been very happy with it: https://www.ebay.com/itm/152687543728 (Not affiliated with the seller, just a happy customer)
Back is a clear, hard plastic (poly-carbonate?) and the "lip" is a firm TPU-type material. I've dropped it dozens of times with zero problems.
I've used the "S-shape" type cases for other phones in the past. A simpler, less "high-end" look, but they have tiny little "nubs" at the edges that give excellent grip. (Zoom in on pics to see):
https://www.ebay.com/sch/Cases-Cove..._from=R40&_nkw=nexus+6+s+tpu+case+-"nexus+6p"
Guyinlaca said:
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
Click to expand...
Click to collapse
I have this Ringke also and it is a good case, but I wouldn't consider it premium. It does provide adequate protection for minor bumps and falls. It has a large enough lip that my tempered glass screen protector doesn't scratch if I place the phone face-down on a table. The clear TPU yellows over time so it looks dingy though. Depending on how frequently you charge or use a headset, the dust caps can be annoying (of course they are easy to snip off the case if you like.)
Overall it is a very good case and the one I use most of the time, but particularly because of the yellowing of the clear plastic, I can't consider it a premium case.
I use a Spigen slim armor. Very nice looking and protects well. I had together it directly from Spigen though. I tried ordering one from a discounter and they send me a fake. It literally didn't even look like the real thing and lacked the kick stand and didn't even fit properly. They just printed Spigen on some random vaguly similar case and tried to pass it off.
Have had a number of cases over the years and I'm none rival the quality, feel, build, and just plain sexiness of the Seidio Dilex Pro. I'm the best kickstand case as the kickstand itself is metal as well as magnetic, it's also very sturdy. I went thru 2 Spigen Slim Armor kickstand cases after the plastic kickstands broke off then I discovered this beauty lol. Also rocking a Dbrand skin and no problems with the fit. Also the feel of the outside lip is great, more than enough to sit it face down, but formed and angled perfectly as to not in any way hinder using the screen. Seidio is also a big name company so the price is higher @ $29.99, over your run of the mill ebay cases, but as the famous saying goes, you get what you pay for lol.
https://www.amazon.com/Seidio-DILEX-Metal-Kickstand-Motorola/dp/B00S6TA3RW
Also might add that the way the metal kickstand is attached the area is flat which means sitting it on a table it will stay put instead of rocking back and forth lol. The butter shell of the 2 pieces is also covered (or made?) out of something that is pretty grippy, no slick plastic or rubbery TPU to deal with, using it for over a year in construction sites, factories, and other outdoor/dirty jobs it doesn't hold dirt or sweaty skin oils compared to others I've used, I wash mine bout once a month in hot water with dish soap and no warping, deforming, or most of all, fading, still black as the day I got it. And one last awesome thing that's soo small to be easily looked over but makes a huge difference when case makers don't do it is the side buttons, each one is individual, precision molded, and have a very satisfying feel when depressing them. It may be a tad bigger compared to bumpers or extremely thin shell cases which are barely a step up over a full Dbrand or (can't remember the other skin company) skin lol, I found myself loving the size, it's not full on OtterBox, but it still is thin enough to let me use it one handed which is whenever I'm doing anything but typing lol.
::Edit:: Oh yea, it comes in Black, Blue, Red, and White. Seidio also makes a Surface case with the metal kickstand as well and I'm sure it's just as high quality of a product I have not tried it myself and cannot attest to it's build, here is an Amazon listing tho if you would like to see it, it is one that includes a belt holster tho there are listings without the holster for cheaper.
https://www.amazon.com/Seidio-SURFACE-Kickstand-Holster-Motorola/dp/B00S6T9YTK
It looks great and feels great I do truly enjoy this wonderful case. A bit pricey but worth it.
Andanatannerie handmade fold case
looks nice, thanks for the pics.
i've wanted a leather case for a while now, but the issue is all the same:
i understand leather is a certain thickness as is, but that front screen with that huge lip around the screen is a little too much for me.