Related
Hi there so after some time I have noticed that my z2 battery dosn't stand as much as before so I noticed that on some apps have been using radio active in hours... I have tryed another google service apps still no use tryed reinstall software still when I enable enthernet bug shows up and now im on purex rom still this bug started really pixx me off and if some one faced this bugg and fixes could you can help me ? Or have any solutions ?
I've been seeking help over most big android forums, and I can't seem to get anymore help other than that, and it's utterly annoying.
So I got a redmi 5 plus over in my country which is Malaysia, and it has a unlocked bootloader, and the box that came with it is in Chinese, so I can only assume it's a imported device. And it's fine in the few weeks, after 3 weeks, my screen started to lose control. I can see the screen showing the image, but I can't make any touches on the device and it won't respond, and the only way to fix this is by locking the screen and unlocking it again. And it won't permanently solve the problem as well. It still occurs randomly between uses, and sometimes it just loses control with everything flashing on screen (emulated touches I assume), and I can't control it until I lock the screen and unlock it again. And I've tried disassembled it and reconnecting the screen ribbon cable and it still occurs. Any method of fixing it for good, it's been messing with my gameplay or normal usage and it's really annoying. Thanks for any help in advance.
What MIUI version are you on? My problems were fixed with the versions released this March.
sigma392 said:
What MIUI version are you on? My problems were fixed with the versions released this March.
Click to expand...
Click to collapse
I'm on 9.2.6.0 NGMIEK, but I can't go any further than that due to software issues.
YenChen Je said:
I'm on 9.2.6.0 NGMIEK, but I can't go any further than that due to software issues.
Click to expand...
Click to collapse
Try flashing the latest firmware files for the stable version of MIUI. There may be problems in your firmware partition.
sigma392 said:
Try flashing the latest firmware files for the stable version of MIUI. There may be problems in your firmware partition.
Click to expand...
Click to collapse
I' m currently stucked on a chinese global firmware, and I have to wait 250 hours before unlocking, so yeah.. and any more newer firmware on global will kill my phone..
My fone liked yours
When i use stock chine it does not happen... After i unlocked & used miui eu, sometime same yours...but i update always ( eu weekly) almost this phenomena sometime happen....
I think this problem is connection to rom it does not compatible with hardware
It happens to me also on global rom 9.2.3.0 NEGMIEK when turning off memory optimization on developer options. The issue goes away after putting it back to middle.
Touch display problem
I was fixing this problem with turn off the background and notifications of facebook lite app
in my country a lot of people facing this problem same
(me too)
I am on latest Rom 9.6.2.0 but have the same issue in MEI7
MI Redmi 5 Plus Touch not working issue
I am experiencing the same issue with my MI Redmi Note 5 Plus with MIUI Version: 9.6.2.0 (NEGMIFD) - Stable version.
I have checked the apps and removed unnecessary apps to make sure this is not because of the any app installed.
Please suggest me what can I do to fix this issue?
Thanks.
mirza_arslan_baig said:
I am experiencing the same issue with my MI Redmi Note 5 Plus with MIUI Version: 9.6.2.0 (NEGMIFD) - Stable version.
I have checked the apps and removed unnecessary apps to make sure this is not because of the any app installed.
Please suggest me what can I do to fix this issue?
Thanks.
Click to expand...
Click to collapse
The touch screen may not be completely unresponsive but may be slightly unresponsive or too responsive. To calibrate the touch screen, follow the following steps.
Dail *#*#64663#*#* in the phone application
Tap touch sensor
Long press the menu button
Tap touch calibration
Follow on screen instructions to calibrate the screen
Source: https://www.ifixit.com/Wiki/Xiaomi_Redmi_Note_Troubleshooting#Section_Incorrect_Touch_Sensitivity
Same problem! I have official Miui Global Stable. Please help!
Is there already a fix for this issue or people who already managed to fix it? I myself encountered this issue too on last weekend. On MIUI Global 9.2 | Stable 9.2.6.0.0(NEGMIEK) too.
Same problem
I have same problem on miui global 9.6.2.0 stable and the navigation bar not working any solution
YenChen Je said:
I've been seeking help over most big android forums, and I can't seem to get anymore help other than that, and it's utterly annoying.
So I got a redmi 5 plus over in my country which is Malaysia, and it has a unlocked bootloader, and the box that came with it is in Chinese, so I can only assume it's a imported device. And it's fine in the few weeks, after 3 weeks, my screen started to lose control. I can see the screen showing the image, but I can't make any touches on the device and it won't respond, and the only way to fix this is by locking the screen and unlocking it again. And it won't permanently solve the problem as well. It still occurs randomly between uses, and sometimes it just loses control with everything flashing on screen (emulated touches I assume), and I can't control it until I lock the screen and unlock it again. And I've tried disassembled it and reconnecting the screen ribbon cable and it still occurs. Any method of fixing it for good, it's been messing with my gameplay or normal usage and it's really annoying. Thanks for any help in advance.
Click to expand...
Click to collapse
warranty
I have the same problem and its now frequently happening. It pisses me off, specially when Im in a Moba Game..
Anyone fixes this issue? please share
Went further from inital stable stock rom (nougat) until stable 9.6.5 (oreo), same touchsreen issue still exist
Like @cyrusextra said, it affected to mobile gaming experience. I'm a FPS gamer and this problem is totally messed up
Any fix?
Any solution to this problem?
New Amazfit Verge US/Global/International 3.2.0.20 Firmware bug
Don't update to this version as double tap to wake the screen doesn't work.
Seems to affect to original US watches only
Same think for me . Can i make a downgrade to 3.2.0.13
Amazfit engineers clearly do not even do basic testing before releasing.
I have found so many bugs and reported so many but it's really pointless - they do not seem to have the S/W engineering skills to fix or test any fixes.
As a Stratos user, the last good firmware was 2.3.5.0 - every release since just added more bugs!
The message here is that just do not update without a VERY good reason, as there is a very good chance, the newer release will be worst than previous.
AFAIK, it affects to original US watch users only, those CN watch users who flashed the US/Global/International firmware are not facing this bug.
I'm 99% sure the issue is related to the bootloader, they used the Chinese one, which is known to have this issue (from users report on my ROM) on original US watches.
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Meanwhile, don't update if you mind double tap to wake and wait for an official fix from Huami.
You can send an email to Huami support, to inform them about this bug on their latest firmware: [email protected]
OK, but DTTW is the smalest problem. I dosent use this
3.2.0.24 is in the huami forum. The problem ist that you dosent recive this in europa if they dont like
Saratoga79 said:
AFAIK, it affects to original US watch users only, those CN watch users who flashed the US/Global/International firmware are not facing this bug.
I'm 99% sure the issue is related to the bootloader, they used the Chinese one, which is known to have this issue (from users report on my ROM) on original US watches.
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Meanwhile, don't update if you mind double tap to wake and wait for an official fix from Huami.
You can send an email to Huami support, to inform them about this bug on their latest firmware: [email protected]
Click to expand...
Click to collapse
Thanks for the email
I also hope they create English forum like Xiaomi has.
time bug in 3.2.0.20
hello,
hello, my watch verge with Firmware 3.2.0.20 have any Bugs,
Big Problem : time in standby mode is wrong on Display !!! 1 hour difference !!!
best regards
videojochen said:
hello,
hello, my watch verge with Firmware 3.2.0.20 have any Bugs,
Big Problem : time in standby mode is wrong on Display !!! 1 hour difference !!!
best regards
Click to expand...
Click to collapse
Yes, this happens due to a time change last night. Just reboot the watch and it will synchronize the times.
Saratoga79 said:
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Click to expand...
Click to collapse
I'm interesting to test a fix
I use 1811 global version.
Nono. These 1hour Problem exist longer that summer time. Sometimes it happend, dont now why.
Tha battery drain in *.22 is hard. >15% a day with nothing as wearing the watch.
Ringtone issue.
The problem exists with the old update and the new update - 3.2.0.20
On inactive display - on incoming call - sounds bad. When the active (lighted) display - when incoming call - rings normally. There is a ringing problem when the display is off.
kkeonline said:
I'm interesting to test a fix
I use 1811 global version.
Click to expand...
Click to collapse
It doesn't seem to work so... Let's wait for an update this week.
Saratoga79 said:
It doesn't seem to work so... Let's wait for an update this week.
Click to expand...
Click to collapse
OK, thank bro.
3.2.1.0 firmware available
New firmware 3.2.1.0 available. Solves two-touch screen unlock issues.
Not tested yet.
Bug fixed on latest 3.2.1.0 version.
Just received the update 3.2.1.0 and it work
I'm having a problem with Update 3.2.1.0, the continuous HR on the clock this function, and the sleep monitor also on the clock this works, but when synchronizing with the cell phone, in the AmazFit Watch application, does not show the data of the continuous HR nor sleep data. I've done the Factory Reset and still continues with this problem. What may be happening.
Wat i noticed. With some internal watchfaces it feels like a battery drain.
With Neon or "inutest Thing" im round about 15-20% a day. With a digital from amazftwatchface im around 8% a day.
sstsbg said:
Ringtone issue.
The problem exists with the old update and the new update - 3.2.0.20
On inactive display - on incoming call - sounds bad. When the active (lighted) display - when incoming call - rings normally. There is a ringing problem when the display is off.
Click to expand...
Click to collapse
Have you solved this? I thought i was the only one! Even the notification ring sounds bad sometimes
laffsj said:
I'm having a problem with Update 3.2.1.0, the continuous HR on the clock this function, and the sleep monitor also on the clock this works, but when synchronizing with the cell phone, in the AmazFit Watch application, does not show the data of the continuous HR nor sleep data. I've done the Factory Reset and still continues with this problem. What may be happening.
Click to expand...
Click to collapse
I saw the same. After every unpair or reset of watch probably all yours activities is counting from that day when you pair it again or resetted. Yours old activities is saving in Watch App and watch, but when you did reset or unpair that day is not saved. I saw that after few reset and unpair. I can't understand why, but probably this is must be.
---------- Post added at 12:19 AM ---------- Previous post was at 12:14 AM ----------
Hexxer said:
Wat i noticed. With some internal watchfaces it feels like a battery drain.
With Neon or "inutest Thing" im round about 15-20% a day. With a digital from amazftwatchface im around 8% a day.
Click to expand...
Click to collapse
When i talked with Amazfit support they siad me watch face don't having any effect to battery life, a little bit strange cos my battery drained faster as usualy with "spiked" watch face only. When i bought watch i could don't charge battery about 4 days, now after latest update i must charge battery after alsmost 2 - 3 days. Amazfit support explaining that as my changed usuage, my changed settings and ect. But these all things wasn't changed at all. With the same activity, settings before i update to latest version battery i could not to charge about 4 days.
Hi all,
I have been experiencing issues with the notifications on my Stratos 3 for a couple of weeks. Very often there is a big delay from when I get the notifications on the phone to when the notifications are shown on the watch. Another problem is that I get the same notifications again on the watch some time after (even if the notifications are already gone on the phone). Also very often notifications stay on the watch after being cleared on the phone.
I have checked that Zepp app is not battery optimized and that it has access to notifications. Not sure if there is some other permission that needs to be granted which might have lost when changing from Amazfit to Zepp.
I didn't have any issues with amazfit app, I think this started when they changed the app to Zepp....
Anyone else encountered the same issues?
I'm having the same issues with Stratos 3.
However, I had them already with the amazfit app.
I'm using it with the Galaxy Note 10+. Also battery optimization is off and all other permissions given.
Notifications work normally in ultra mode!
Any help is highly appreciated.
Mmm then it could also be related to the 4.2.7 firmware update that I did recently.
I have enabled the phone anti-lost feature and I noticed that the watch is constantly loosing connection even if it is 10cm far from the phone.
My phone is a Moto One Action
kulaki0 said:
Mmm then it could also be related to the 4.2.7 firmware update that I did recently.
I have enabled the phone anti-lost feature and I noticed that the watch is constantly loosing connection even if it is 10cm far from the phone.
My phone is a Moto One Action
Click to expand...
Click to collapse
My first firmware was 4.2.6.0 and I had the problem already.
I read it was better with 4.2.5.0... but I don't really understand how to downgrade.
I have a Galaxy note 10+ Deactivating "find my mobile" didn't have any effect for me.
After updating to 4.2.8 I have the same issues with the notifications and lost connection frequency.
I will raise a bug on the Zepp app and hope it is looked at
Hey there,
I had the same problem, and Zepp was configured to be battery optimized...
I turned it off and now everything is fine !
arbaus said:
Hey there,
I had the same problem, and Zepp was configured to be battery optimized...
I turned it off and now everything is fine !
Click to expand...
Click to collapse
Hi! I have the same issue and I had battery optimization "ON" for Zepp, turned it off and..no result. I believe its either a bug on the firmware or some minor tweak required on the ROM( its a custom ROM, not stock). But with the Stratos 2, same phone, same ROM, no issues whatsoever...
Guys, massive improvement: tried with an older Zepp version (Amazfit 4.7.1) and even if I havent tested WhatsApp notifications all the others are super fast and I had zero connection lost warnings! Wish you all the best of luck!
Hi guys,
COuld you dump your firmware and upload?
The only way I could receive notifications properly was using Amazmod (sorry if you own an iPhone) and turning off everything related to graphics/images in notifications. They are some seconds late, but still usable though.
farrayoles said:
Guys, massive improvement: tried with an older Zepp version (Amazfit 4.7.1) and even if I havent tested WhatsApp notifications all the others are super fast and I had zero connection lost warnings! Wish you all the best of luck!
Click to expand...
Click to collapse
Dude, thanks a lot, the only thing I didn't tried, except for factory reset the phone, was an older version of the app. I could only find Amazfit Watch 2.7.2, but it's working flawlessly with it, watch is first Stratos
Hello,
I have a Mi 11 Lite 5G and a Mi Watch and no notifications, or sometimes, and do not understand why.
Are you with the same issue ?
Pascal536 said:
Hello,
I have a Mi 11 Lite 5G and a Mi Watch and no notifications, or sometimes, and do not understand why.
Are you with the same issue ?
Click to expand...
Click to collapse
Hi,
I also have the same issue. I have a mi Band 4 and have issues with the notifications. After about 5-7 days, the bands permission to access the notifications is reset on it's own to no access. When I try to enable it, it is already set to allow. I have to revoke and grant permission again for it to work.
Had no issues with the Poco F1 and the same band for more than a year.
After tinkering right now, I got to this screen and I am doing it all. Just checked, but on the Poco, only auto start was enabled. Will see in a few days if this resolves the issue
Hi.
Just an update. For me, the above settings solved the notification issues. Now everything works as it should.
In the meantime I installed a notification patch from a different thread so maybe it helped too...
Here's also that file and a link to that thread
Issue with notifications after the 12.5.1 update
Since the last MIUI update I am experiencing an issue with notification. When using a video player (like Plex, VLC, YouTube Vanced), I usually see a notification icon when using background playback. This is now gone. Also, and this is the main...
forum.xda-developers.com
Hope it works for you too