Related
Hi,
I flashed my x10a with latest flashtool with 2.3.3 firmware. The flash was successful, but after the flash it's screen touch is no more working. I thought that there might be problem with the firmware that I used, so I again checked with many firmwares, but none of them solved my problem.
Then I tried to repair my phone with Pc Companion, it says that no software is available for my phone. Also I tried with Sony Update Service, this also said no software for my phone.
I am tired now. I tried all the methods that I found on internet. Isn't there any solution for me now? I know that It's not a hardware problem because before flashing its screen was working without any problem. I know you guys here are expert in android problems. So hope you will help me in this problem? I am from Nepal. There isn't sony service in my country. What is the solution for me? I need your help....:crying:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Bjornlindekens said:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Click to expand...
Click to collapse
Bro thanks for your reply, I flashed X10a_2.1update1_r2.1.A.0.435_Generic.ftf, X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf, and few more firmwares like this. I used flashtool-0.8.0.0-windows_2.exe to flash the phone. Ya you are right my phone DOES work it fully loads up but not responding to my touchscreen
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
me.amar said:
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
Click to expand...
Click to collapse
did your touchscreen worked on 2.1 firmware
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
techdevilisnowmonster said:
did your touchscreen worked on 2.1 firmware
Click to expand...
Click to collapse
Before flashing it was working.But after flashing it didn't worked on any firmware
Bjornlindekens said:
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
Click to expand...
Click to collapse
Does this works for android phones?
yes the tutorial is just wrong i noticed .
you could just use it as a guideline tough my apolegies
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
I have the exact same problem, tried resetting everything, I suspect it is a hardware problem.
awedxz said:
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
Click to expand...
Click to collapse
Try updating, I had this issue with custom ROM's something certain boot images have this bug.
I flashed a new boot image and bug was gone but had no wifi reverted back to latest global stock via MiFlash.
If you have TWRP try the ROM here https://xiaomi.eu/community/threads/6-7-7-11.32639/ it seems ok.
Did anyone find a fix for this issue. I have the same problem. Battery percentage shows negative 2% and I can't get into recovery because of that. When I press Power and Volume + It shows the battery icon in red and won't let me into recovery. I have the Redmi Note 3 Pro Snapdragon version.
I tried flashing a couple of ROMs via MiFlash with no positive results.
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
What rom are you using?
EkiFox said:
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
Click to expand...
Click to collapse
The Radon V1.8 Kernel actually causes this bug on MIUI based roms, so don't flash the kernel.
Radon Version 1.9 will resolve the battery bug on MIUI and other roms.
Talking about cm/aosp I tried almost all combination kernel/rom.
No success except for this particular cm with camera patch.
Same problem with battery, showing -2% but phone is working... Plz provide solution asap
If u run MIUI, just download FASTBOOT ROM, restart phone to FASTBOOT MODE and flash ROM using this tool. But if u run custom ROM just flash custom kernel (like RADON).
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
Fixed the -2% Bug on latest CM13-Snapshot for me!
You Sir are awesome
flashed the latest global firmwareware(not developer one) solved my issue, also now my phone updates OTA.
Use only the official rom. custom that sellers flash usually is a junk just with additional options for menu's language!
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Geeta_ghai said:
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Click to expand...
Click to collapse
Flash the latest miui ROM in edl mode using miflash. That is the answer.
No
No that is not the answer it's a hardware issue short circuit in motherboard
induna said:
Flash the latest miui ROM in edl mode using miflash. That is the answer.
Click to expand...
Click to collapse
androidnandroid said:
No that is not the answer it's a hardware issue short circuit in motherboard
Click to expand...
Click to collapse
Hmm, well flashing an official ROM in edl mode has fixed this problem for many people, including myself. So it would seem that in most cases at least it IS a software issue that can be fixed by flashing.
My phone came from Banggood and a vendor ROM that wouldn't even support my FP reader, Goodix, and which booted up with the -2% battery bug out of the box. Flashing the official global stable ROM, 8.0.2.0 at that time, fixed all of the issues.
Hmmm may be sir but that doesn't seem to fix mine although mine is from xiaomi only and the problem came after using 6 month suddenly without any reason one morning
Ok guys there are 2 solutions to this problem one is drain your battery and don't charge it for 2 3 days drain it like he'll coz after switch off still some juice is left you have to drain completely and other rapid method is open your redmi note 3 and disconnect battery cable and reconnect it... The problem is not software its hardware where battery reading stuck at minimal which is - 2 ... Thinking minus two hours coz at zero still some battery left for edl and fastboot mode time and alarm... Fixed my redmi note 3 hope it will help you.. Coz tried all method format... 10 times flash all roms through fastboot mode Coz updater mode won't work coz of low battery reading... Enjoy guys
I am having a same issue with redmi note 3 SD version. Tried everything Global BETA ROM, STABLE ROMs but didnt solved my issue. Showing -2% bettery in every ROM which i have flashed.
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
razy111 said:
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
Click to expand...
Click to collapse
I had the exact same problem like this one on xiaomi redmi note 3 pro sd. I tried flashing fastboot miui 10 official but the problem still there. I also tried changing the usb charging port but still the same. I tried plug in the charger and hold power and + volume and it stuck at mi logo.
I want to know if anyone fix this?? Please help.
Hello!
I recently bought a Snapdragon Redmi (kenzo), it came with a chinese version of MIUI and on the first setup it already started to show some problems: when I try to connect to my google account it suddently rebooted. After some tries and reboots and worked but on day by day usage I continue to have random reboots and apps crashing.
I already updated to other miui versions, CM13, CM14 and some others roms and kernels, flashed with diferent TWRP versions, in all of them I got the same problem.
I think it's also not related to hard usage, because the problem appear when I open what's app, facebook, a lot of times with swiftkey. And I can open some heavy games without problems.
Also, sometimes it reboot and get stuck on a bootloop, when this happen, a backup restore or dirty flash wont solve the bootloop and I always need to go on TWRP, do a factory reset and flash the rom again.
I think the explain it's a hardware defect...
There are any other thing I can try to solve it?
Try flashing fastboot ROM if you didnt yet
Denis:) said:
Try flashing fastboot ROM if you didnt yet
Click to expand...
Click to collapse
I already tried once with miui, but I can try again with other ROM. Which one do you sugest?
You can only flash MIUI fastboot ROM via MiFlash, not possible to flash other...it must be a hw problem if you encounter that on every ROM...
Try flashing the developer ROM. Or look for similar issues on MiUi forum. Those guys will surely help you out!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
software problem not hardware, flash fastboot rom
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....
iTaisHi said:
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....
Click to expand...
Click to collapse
I sent the phone back to the store and they will refund me.
pituca292 said:
I sent the phone back to the store and they will refund me.
Click to expand...
Click to collapse
thanks pituca292,
i thing that would be no option for me,
i bought the device abroad, would be not economic for me to return it.
very strange what happening to my device.
reboots stopped (have no idea of what reason : recharge again from 5% battery, get into test mode (push 3 button for 10 sec': vol+, vol-, power).
but now other issue showed up : very lots of screen glitches, can use the phone like this, like some bad soldering inside.
first time i got into test mode, there were also screen glitches,
but now, whenever i get into test mode, downloading mode or the 3rd mode (with phone and cable picture), there is not glitchs at all,.
but after phone is starting - lots of screen glitches !!
i am lost
I have propblem. I installed the stock android 10 and after that my proximity sensor stoped working. During the call, screen wasnt turn off thus I downgraded. Now I am using stock android 9. It still not working. I dont know if the 10 stoped the prox. Hardware. How I can solve that problem. Should I need to wait for the new update or It can be a hardware problem. I formated many times It did not work. I reset no way. I entered to the hw check it says "not support this sensor". When I searched cominity. For note 8 after oupdate the hw passed the test. What to do?
I found a way but I need persist.img file. How can I find that file for mi a3
mehalaktas said:
I have propblem. I installed the stock android 10 and after that my proximity sensor stoped working. During the call, screen wasnt turn off thus I downgraded. Now I am using stock android 9. It still not working. I dont know if the 10 stoped the prox. Hardware. How I can solve that problem. Should I need to wait for the new update or It can be a hardware problem. I formated many times It did not work. I reset no way. I entered to the hw check it says "not support this sensor". When I searched cominity. For note 8 after oupdate the hw passed the test. What to do?
Click to expand...
Click to collapse
I have the same issue. The value for Proximity sensor in Hardware test (*#*#64663#*#*) is -1.
mehalaktas said:
I found a way but I need persist.img file. How can I find that file for mi a3
Click to expand...
Click to collapse
You can find persist.img inside the stock fastboot rom. The guys at 4pda also posted a download link of the persist.img and also a tutorial on how to flash it using twrp.
My phone is OnePlus 7T Pro HD1913 EU version. I have recently had a problem with auto-rotating the screen. I tested on the system versions 10.0.7, 10.0.13, 10.0.14, 11.0.5.1, 11.0.6.1, 11.0.7.1 and I have the auto turning upside down every time. I was flashing in different ways (OTA, fastboot, MSM) nothing helps. Full wipe downgrade versions don't help either. The same is true after installing a custom rom. Only when I install closed beta Hydrogen OS 12, auto-rotation works properly. Can someone advise me something?
same issue, I'm on latest Android 11 build after I downgraded from color os 12.1
I also think that it happened after testing the Chinese 12 system. The strangest thing is that when I reinstalled this closed beta 12, it has no problem with proper screen rotation. I tried to calibrate the sensors in the service menu, unfortunately it did not help.
I am facing the same issue. It doesn't bother me when I am portrait mode. When I go to landscape mode, it just reverse my screen up. I try to find solutions but no one I found nothing. If anyone found something please help me with that.
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Hope it fixes soon.
here is the link he uploaded the video hope it may help you also.
i tried myself it fixed the auto rotate issue.
Atharvaisbadhir said:
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Click to expand...
Click to collapse
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
kemoti said:
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
Click to expand...
Click to collapse
Yeah flashing someone’s else persist breaks your fingerprint functionality and your widevine certificate.
i think you should send it to service centre.