[ROM][UNOFFICIAL] SAMSUNG GALAXY S6 (ZEROFLTEXX) [LINEAGEOS 17.1]

[ROM][UNOFFICIAL] SAMSUNG GALAXY S6 (ZEROFLTEXX) [LINEAGEOS 17.1] - Galaxy S6 Android Development

cool.

HWC Working?

xylene35 said:
HWC Working?
Click to expand...
Click to collapse
Yes!

Camera flash not working correctly

Bambangw said:
Camera flash not working correctly
Click to expand...
Click to collapse
Thanks for Report!

All found bugs on the Russian resource 4pda:
•As on any aosp-firmware, when talking, the interlocutors complain about the echo (they hear themselves).
•Modem problems: sudden disconnections, slow connection, data disconnection, missed calls or SMS.
•IMS services (VoLTE, VoWiFi) will not work.
•Problems with power consumption. Battery power is consumed faster than usual.
•Flash does not work correctly in camera apps.
•Always On Display strongly drains the battery, it is advised to turn off.
•Who has a bug with wireless headphones:
[url]https://drive.google.c...oilp/view?usp=drivesdk[/url]
•Adding a fingerprint may hang on the initial phone setup (just wait or skip this step).
•WiDi (Wireless Display) displays an error (unverified information).
•The earpiece plays music through a standard app when headphones are connected (restarting the device helps).
P.S. It is machine translation.

Can't get it to install, keeps booting back into recovery(twrp). I'm following the steps in the op.

gamemaster2030 said:
Can't get it to install, keeps booting back into recovery(twrp). I'm following the steps in the op.
Click to expand...
Click to collapse
please verify your device!

Zram causes the massive batery drain. Disable that and tweak the clock speeds a bit and it the batery issue is solved. Camera works, flash only works when you touch-focus on a dark surface and then only for that shot. I had a bootloop on a couple tries. Doing a full wipe helped, tried installing with usb-otg. Ota updates don't work for me. Boots in twrp and nothing.
Galaxy S6

gamemaster2030 said:
Can't get it to install, keeps booting back into recovery(twrp). I'm following the steps in the op.
Click to expand...
Click to collapse
Try to not flash the twrp app after flashing the rom. Sounds weird, but I had the same problem and this was the solution.

BenLue said:
please verify your device!
Click to expand...
Click to collapse
Verify meaning making sure it's the correct model? If so, yes it's the correct model. G920-F, so Zerofltexx. I'm running a different rom also for Zerofltexx and that one is working fine.
mythenmetz said:
Try to not flash the twrp app after flashing the rom. Sounds weird, but I had the same problem and this was the solution.
Click to expand...
Click to collapse
I already never do that, so that isn't the issue.

Can anyone tell me if this works with sm G925I model?

Well. It was promising with my W8 phone but unfortunately as all Pie ROMs and now this v10....A lot of camera issues. Problems with picture taking. Camera has a lot of trouble focusing properly....has a lot of problems to successfully take a picture with the flash and many many difficulty in taking pictures through Facebook messenger. AND some volume control problems where it does not ring loud enough even when maxed volume. I need to resign and go back to a nougat build....I had so much hope. But...the installation went through like a charm and setting it up was flawless so nothing to say there.

Canadian version G920W8 flash, baseband is not detected rom identifies it as G920F. No network.

Well there aren't many aosp roms here so I'm going to try this one then

Endless loop with lineage-17.1-20200319-UNOFFICIAL-zerofltexx
Installed today lineage-17.1-20200319-UNOFFICIAL-zerofltexx from TWRP 3.3.1-0 on Samsung Galaxy S6 (SM-G920F). After system start it boots endless: blue circle moves endless on a blue line from the right to the left. Power off button has no effect - it is not possible to switch off the power. Volume Up + Power + Home has no effect - activation of TWRP is not possible. Volume Down + Power + Home starts the booting from the beginning and ends again in the endless slope of the blue circle.
But when I long press Volume Down + Power + Home and change immediately to long press of Volume Up + Power + Home when the booting sequence starts again, then TWRP appears after some seconds. Here I can switch off the power, but only when I unplug the USB cable - else it returns to the TWRP.
UPDATE:
I deactivated in TWRP => Settings: "Prompt to install TWRP app if not installed" and installed lineage-17.1-20200319-UNOFFICIAL-zerofltexx again. Now it works !!
UPDATE:
What an ugly ugly design !! Is this design made by google or by lineage ? Can somebody kill the designer ? And the standard apps are more stupid than ever. I've never seen such stupid apps. In a new version the apps should be more smart but here they are incredible stupid. I will immediately return to an older version of android. Absolutely incredible !!

Does hotspot work in this rom?

Thunichgud said:
UPDATE:
What an ugly ugly design !! Is this design made by google or by lineage ? Can somebody kill the designer ? And the standard apps are more stupid than ever. I've never seen such stupid apps. In a new version the apps should be more smart but here they are incredible stupid. I will immediately return to an older version of android. Absolutely incredible !!
Click to expand...
Click to collapse
This is aosp lineage so none the apps are Google's.. Google apps are proprietary..
You want the new Evolution X ROM . It's pixel themed

Thanks for the dev for great work.
Proxmimity sensor does not work correctly.
the touch buttons vibrate when the screen is locked
the camera is very cropped
battery drain is fast
model 925F

Related

[ROM][UNOFFICIAL][8.1]CypherOS 5.1 FUNNEL CAKE [XIAOMI REDMI NOTE1 LTE DIOR]

The rom is NOT rooted
After installation is complete, flash Magisk for root (optional)... Not necessary to delete sensors.msm8226 after install to boot. The rom boot normally. SIM CARD is detected without reset network settings.
Camera, video recording, flashlight, sound all working!
DOWNLOAD
ENJOY!!!

mitomanu said:
This is Cypher. An extension to pure Android. Cypher tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.
Get your builds and changelog from our website
get.cypheros.co
Note: Builds are updated as soon as possible. There is no build cycle. Information pertaining to your device is displayed
Accordingly. The current build is the latest for your device. If your device is
scheduled to release on a certain day, but the new build isn't displaying, contact
your device maintainer for more information but wait at least 72 h. Please know builds are updated by 12am
EST.
Become apart of our G+ community - JOIN
Features:
- Status bar Customization
- Changeable icons
- Smart pulldown
- Clock position
- Date design
- Quick Settings
- Brightness slider
- Tile tap customization
- System
- Screenshot partial and full
- Power menu customization
- One-handed mode
Credits
LineageOS
AICP
PureNexus
AOKP
Dirty Unicorns
Paranoid Android
@subdragonzj
@ashishkotnala29
and more..
Sources
device tree
kernel
vendor
INSTALLATION
DOWNLOAD THE FOLDER
WHICH CONTAINES THE ROM, GAPPS AND MAGISK
MAKE A BACKUP WITH TWRP
WIPE CACHE, DALVIK, SYSTEM AND DATA
INSTALL THE ROM
INSTALL GAPPS ARM 8.1
The rom is NOT rooted
After installation is complete, flash Magisk for root (optional)... Not necessary to delete sensors.msm8226 after install to boot. The rom boot normally. SIM CARD is detected without reset network settings.
Camera, video recording, flashlight, sound all working!
DOWNLOAD
ENJOY!!!
Click to expand...
Click to collapse
awesome
I hope your next official and rom sir

Recovery replaced by android recovery
Recovery replaced by android recovery after flashing ROM and setting app crash when I am going to network setting (com.android. phone) stop working

Techsangam said:
Recovery replaced by android recovery after flashing ROM and setting app crash when I am going to network setting (com.android. phone) stop working
Click to expand...
Click to collapse
Its odd. First: it cannot replace with stock recovery, because recovery is not flashed with rom.
So, replace your recovery with twrp, wipe all and reflash rom.
After boot, a message will appear, just press 'wait'.

There are Some issues!
Battery Drain, I'm getting less than 2 hours SOT and less than 6 hrs of Stand by time.
Also vibration is not working.

Not working
WiFi hotspot
Navigation button not hide
---------- Post added at 04:44 AM ---------- Previous post was at 04:39 AM ----------
mitomanu said:
Its odd. First: it cannot replace with stock recovery, because recovery is not flashed with rom.
So, replace your recovery with twrp, wipe all and reflash rom.
After boot, a message will appear, just press 'wait'.
Click to expand...
Click to collapse
Any one

I will make an update next days. I was searching and the wifi tethering is an issue in almost all devices running aoscp 5.1 (android 8.1).
The navigation buttons are set to shown allways on, and like I noticed the settings for buttons is incomplete. I will try to fix it in next build and the vibration to.
Just a little patience.
Thank you for using my build and for your answers.

mitomanu said:
I will make an update next days. I was searching and the wifi tethering is an issue in almost all devices running aoscp 5.1 (android 8.1).
The navigation buttons are set to shown allways on, and like I noticed the settings for buttons is incomplete. I will try to fix it in next build and the vibration to.
Just a little patience.
Thank you for using my build and for your answers.
Click to expand...
Click to collapse
Tnxx
---------- Post added at 05:41 PM ---------- Previous post was at 05:40 PM ----------
Techsangam said:
Tnxx
Click to expand...
Click to collapse
Music player no have sound

i flashed rom but video record and wifi not work

Hi
I've installed this as directed above. First time it was stuck in fast boot mode. Later I've flashed twrp and wiped cache and flashed ROM and GApps. One booted, error message saying " Android.phone.com" stopped working. When I ordered wait. It will come to home screen and rebooting. Thus is repeating. Now I have to search another suitable ROM

Almost can use daily but still have some issues and it runs not faster than android7.1.2,now I'm using dotos.Thx your hard working:laugh:

Is there a manifest.xml for this project that I can use to make my own customized build.

Fix network settings bro unable to use 4g as network settings gives fc

Any update on next builds?

Android is shutting down
I will cut it to the point I flashed the rom then flashed gapps and then magisk and then i booted it up but after some minutes it says power shutting down or something similar to that and the rom can't connect to hidden wifi networks too.

thank a lot about you!!!!!!!!!!!!!!!

Sir his this rom development is live ?

Lock Screen doesn't work well
When I set the lock screen password and try to unlock it, the system interface is stuck and cannot be operated. The device must be deleted by clearing the data to delete the lock screen password. Is there any way to fix this?
Note: Working fine in Android 7.1

link for rom not working

[TESTING][RECOVERY][UNOFFICIAL]TeamWin Recovery Project 3.2.3-0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP), is an open-source software custom recovery image for Android-based devices.It provides a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices.
Disclaimer:
/*
* Your warranty will be VOID after installing a custom recovery.
*
* Get notified yourself that I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this recovery
* before flashing it!
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device,
* I will laugh at you.
*/
Click to expand...
Click to collapse
What's new in 3.2.3-0:
* Fix automatic installing of OTA zips on encrypted devices
* Remove SuperSU from TWRP
* Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Downloads:
Compatibility:
• Only For Exynos International Variants:
- N960F
- N960FD
- N960N
Installation:
• In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
• Now go to Settings -> Developer options. (above About device).
• You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
• Extract Odin_3.10.7.zip to your computer.
• Install Samsung Mobile Phone Drivers for Odin to find your device.
• Download .tar image of TWRP For Note 9.
• Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
• Open Odin and place that TWRP tar file in the [AP] slot.
• Connect your phone.
• Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
• Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
To disable forced encryption and mount internal storage(/DATA):
(Note this MUST be flashed after SuperSU if you intend to root)
• Boot to TWRP.
• Select Keep System RO
• Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
• Check DATA is mountable.
• Install SuperSU (If Root Is Required)
• Install Boot Image Patch(DM-Verity) below.
• Reboot
Boot Image Patch
No_DM_Verity_Patcher_By-ashyx
Thanks for support.You can donate me if you want! Every little penny is helpful to me.It'll at least help me to pay my server bill or wifi bill. :good:
UPI: [email protected]
Paypal: [email protected]
XDA:DevDB Information
TWRP 3.2.3-0, Tool/Utility for the Samsung Galaxy Note 9
Contributors
Albe96, jesec
Version Information
Status: Testing
Created 2018-08-11
Last Updated 2018-08-13

Changelogs:
August 12,2018:
Initial Release

#Reserved2

So fast, still waiting my note9

kenpaci said:
So fast, still waiting my note9
Click to expand...
Click to collapse
Yeah.This was a quick build.The TWRP is built with Stock Boot.Img And It'll a good thing if everybody asks for Kernel Source Code for N960F.I did yesterday

Albe96 said:
Yeah.This was a quick build.The TWRP is built with Stock Boot.Img And It'll a good thing if everybody asks for Kernel Source Code for N960F.I did yesterday
Click to expand...
Click to collapse
Good news???

Great news~~~Still waiting for my Note 9. Thanks Albe96

Well.I'm just waiting for users to test it and tell the result! ?.I hope it'll be positive and boot up safely.

Albe96 said:
Well.I'm just waiting for users to test it and tell the result! .I hope it'll be positive and boot up safely.
Click to expand...
Click to collapse
I'm sure it will be wonderful ?

TheMadScientist said:
I'm sure it will be wonderful ?
Click to expand...
Click to collapse
Yeah.I hope so ?

Damn, this is about the fastest Ive ever seen twrp drop for a sammy device.
You guys are all over it!
You rock.:thumbup::thumbup::thumbup:
This makes waiting for the device even more painful though lol.
sent from my Exynos S9 plus, Pixel 2 XL or Note FE

Will this work on the SM-N960N Korean version

gubbilo144 said:
Will this work on the SM-N960N Korean version
Click to expand...
Click to collapse
Yes If N960N is Exynos Variant.

Device is bootlooping now at the splashscreen, Can't access any modes, 3 Button combinations (Recovery nor Download).
Any Ideas mate ?
EDIT:1 - After a series of button combinations, Charger plug/unplugs - Managed to push it into download mode and flashed the stock rom again.
The TWRP TAR doesn't work, and if you have any other suggestions, let me know.

JazonX said:
Device is bootlooping now at the splashscreen, Can't access any modes, 3 Button combinations (Recovery nor Download).
Any Ideas mate ?
EDIT:1 - After a series of button combinations, Charger plug/unplugs - Managed to push it into download mode and flashed the stock rom again.
The TWRP TAR doesn't work, and if you have any other suggestions, let me know.
Click to expand...
Click to collapse
I guess it won't work untill we get kernel source out.BTW please contact me in telegram @Albe96 .I'd like to give some more shots and if I succeseed to boot it into TWRP,I'll request to open this thread again.Untill then @TheMadScientist close this thread.

[ROM][9.0][POTTER][OFFICIAL]Syberia Project[Weekly][17NOV2018]

Title - [ROM][9.0][MI5][OFFICIAL]Syberia Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for Moto G5 Plus (Potter) that implements various features. This project was designed by our "Syberia Team" from scratch based on AOSP source code. Also for HALs we use CodeAurora sources (i.e. CAF). Our team: @blinoff82, @DennySPB, @alexxxdev. Also many thanks to our designer @rlshukhov for logos, wallpapers and bootanimation.
If you like our work you can you can buy us a cup of coffee or a glass of beer
Here
Code:
Upstreamed ART
Latest SQlite
OTA Updates
Themes support
Real-time charging info on lockscreen
Custom switch tiles
Tiles Haptic Feedback
Torch gesture on power button
Screen off animations
Screen Record to the Power Menu
Statusbar brightness control
Navigation bar, Lockscreen shortcuts, StatusBar tuner
Features flash-call-on-waiting
Volume key music control
Volume Rocker Wake
Double tap to sleep on lockscreen and statusbar
HOME as wake key
Increasing ring feature
Reset battery stats
Hide the power menu on the lockscreen
Statusbar network traffic
incall vibration options
Force Expanded Notifications
Battery light customization
HeadsUp notifications
Smart Pulldown
Support for MicroG
Increasing ring feature
Reset battery stats
Hide the power menu on the lockscreen
Statusbar network traffic
incall vibration options
Volume Key Answer
Launch default music player on headset connect
Live Volume Steps
Quick Pulldown
Statusbar clock date customization
Custom system animations
Navigation gestures
Night Light brightness mode options
Configurable 0, 90, 180 and 270 degree rotation
Full screen photo for incoming and outgoing calls
And more and more...
Features are constantly being added and improved.
ROM DownloadsGapps DownloadsMagisk Downloads
Code:
-Backup each and every partition from TWRP Recovery
-If you're coming from another ROM, you should wipe
/system, /data, /cache, and dalvik/art cache.
-Flash the ROM.
-Flash any other mods/etc. you want (e.g. GApps, Magisk).
-And at last Reboot
-First boot will take few minutes! Have patience
Clean Flash is always recommended!
Official website Syberia Project GithubKernel Source Official Telegram Group
XDA:DevDB Information
Syberia-Project, ROM for the Moto G5 Plus
Contributors
ash4win
Source Code: github.com/syberia-project
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest TWRP and Oreo fingerprint Firmware
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2018-11-17
Created 2018-10-21
Last Updated 2018-12-26

Do we have Pie like navigation button?

xijaw said:
Do we have Pie like navigation button?
Click to expand...
Click to collapse
On a Pie rom? I don't think so.

Did a clean install now my phone is in a bootloop, it turns on and shows the choose language screen and then turns off, tried reinstalling didn't work

marmaduki said:
Did a clean install now my phone is in a bootloop, it turns on and shows the choose language screen and then turns off, tried reinstalling didn't work
Click to expand...
Click to collapse
Same here, tried two clean installs using different gapps, not ready for primetime.
Maybe try POSP released today on TG, seems very good so far & comes with Optimus Drunk kernel and Lawnchair launcher. HavocOS for Pie (on TG group) was also good, everything working well & lots of customizing options.

"Error 7" flashing un TWRP
How can I install this ROM? since I downloaded the latest version, but at the time of flashing in TWRP it loads a bit and then I skipped a screen of "error 7" I understand that this happens with TWRP versions that do not support 64bit systems, but my version of recovery is 3.2.3-0 and this error only comes up when I try to flash this ROM, could someone help me? since I really want to try this rom

muletas479 said:
How can I install this ROM? since I downloaded the latest version, but at the time of flashing in TWRP it loads a bit and then I skipped a screen of "error 7" I understand that this happens with TWRP versions that do not support 64bit systems, but my version of recovery is 3.2.3-0 and this error only comes up when I try to flash this ROM, could someone help me? since I really want to try this rom
Click to expand...
Click to collapse
This didn't happen to me installing this ROM using TWRP 3.2.3-1, installed ok in TWRP but on booting to system it keeps shutting down and rebooting, so don't bother this ROM needs more work anyway. If you read the thread the posts above yours mentioned this problem.

Dahenjo said:
This didn't happen to me installing this ROM using TWRP 3.2.3-1, installed ok in TWRP but on booting to system it keeps shutting down and rebooting, so don't bother this ROM needs more work anyway. If you read the thread the posts above yours mentioned this problem.
Click to expand...
Click to collapse
I also have problems with that version of TWRP, since when I flashed this version I already tried it directly from my recovery, I tried it from the official TWRP app and I already tried to flash from applications like "flashify" and at the moment of doing it, all it appears in order ... but when I try to enter TWRP again, it does not enter, it throws problems on the screen and does not enter TWRP, I do not know what the cause is

muletas479 said:
I also have problems with that version of TWRP, since when I flashed this version I already tried it directly from my recovery, I tried it from the official TWRP app and I already tried to flash from applications like "flashify" and at the moment of doing it, all it appears in order ... but when I try to enter TWRP again, it does not enter, it throws problems on the screen and does not enter TWRP, I do not know what the cause is
Click to expand...
Click to collapse
You must have some other problem, I've used all potter TWRP versions since phone came out & no such errors. All ROMs install fine in TWRP and this one only can't boot to system which is in the ROM itself. Sorry can't recommend anything more but maybe post in the official TWRP development thread in this subforum.

marmaduki said:
Did a clean install now my phone is in a bootloop, it turns on and shows the choose language screen and then turns off, tried reinstalling didn't work
Click to expand...
Click to collapse
It works for me
I have used both opengapps(mini) and bitgapps

ash4win said:
It works for me
I have used both opengapps(mini) and bitgapps
Click to expand...
Click to collapse
How you do that?

Karthikmoto said:
How you do that?
Click to expand...
Click to collapse
First wipe system data cache dalvik from twrp
Flash rom
gapps(Opengapps Mini)
Magisk(Optional)

ash4win said:
It works for me
I have used both opengapps(mini) and bitgapps
Click to expand...
Click to collapse
Thanks for your work but you seem to be the only one.
Just tried again with no gapps and same result, when it gets to desktop within 1-2 seconds it says shutting down and reboots. The other day I tried twice using the same micro opengapps that I've used with other recent ROMs with no problem. Clean installs in TWRP which reports successful install, booting looks normal until you get to the desktop.

Camera Stops working
Camera installed from stock Gapps is not working and can't open other camera mods
Only stock moto camera is working

ROM is now weekly and the link is https://sourceforge.net/projects/sy...tter-v1.2-20181027-1437-OFFICIAL.zip/download

This rom is really nice.. Thx dev.

Well i just installed that rom and i can say that everything is working flawlessly until now. I hope the the battery life would be good also like everything else in that rom.

Anybody else having problem with fingerprint not working? Did I miss a setting?

Repiix said:
Cant run the camera from Gapps or any 3rd party camera apps
Click to expand...
Click to collapse
DO NOT quote the entire OP, it is considered bad etiquette around here and there was nothing in it related to your post.
bariiie said:
Anybody else having problem with fingerprint not working? Did I miss a setting?
Click to expand...
Click to collapse
From OP:
"Read the whole OP!"
"ROM Firmware Required: Latest TWRP and Oreo fingerprint Firmware"

Hey Dev thanks for this rom,
Here is a gift from me
Watch this-Syberia OS review
https://www.youtube.com/watch?v=S1bHKUgpGlw

[ROM][10]Resurrection-Remix v8.6.9 Official[SURYA][KARNA](10/06/2021)

[10.0][OFFICIAL]Resurrection Remix v8.6.9 [surya][karna]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome 
combination of performance, customization, power and the most new features, brought directly to your Device.

Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.


Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom
Boot into recovery
Flash ResurrectionRemix Rom
Format Data
First boot may take up to 10 minutes.
ROM Download
Resurrection Remix Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

XDA:DevDB Information
[ROM][10]Resurrection-Remix Official[surya][karna], ROM for the Xiaomi Poco X3 NFC
Contributors
Lostark13, mahajant99
Source Code: https://github.com/lostark13/device_xiaomi_surya
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: V12.0.9 (surya),V12.0.10(karna)
Based On: LOS
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2020-10-13
Created 2020-10-13
Last Updated 2021-6-10

Reserved
13 November 2020 Update
-Added Support For Karna (Poco X3 Indian Variant)
-Synced With Latest Rom Source Changes
-Fixed Battery Overlays
-Under The Hood Changes
10 December 2020 Update
-FIxed 5Ghz WiFi
-Fixed 4K Record
-Fixed FM
-Added FPS Toggle
-Fixed HDR
-Old Stereo Sound
-Unified Build
12 December 2020 Update
-Fixed Yellow Tint At Boot
-Fixed Notification Light
-Address Some Sepolicy Denials
-Synced With Latest Rom Source Change
27 December 2020 Update
-Fixed Charging LED
-Fixed Wifi Display/CAST
-Fixed Sound Recording After 2 Seconds
-Added Smart Charging
-Added RR Wallpapers
-Vanilla Build (No More Gapps Version)
23 January 2021 Update
-Fixed Vowifi
-Fixed Selinux Status In Trust
-Added Power Profile For Karna From MIUI 12.0.8
-Added Clear Speaker In Parts
-Force Tripple Frame Buffer
10 June 2021 Update
-Shipped With Cannon Kernel v2
-Added Touch/Gaming Profiles
-Latest Source Synced
Note-Need Clean Flash For Vanilla Build If Coming From Gapps Version.

Reserved

Wow, another custom ROM for Poco x3, thanks for your work dev

Instructions say that wipe system ... Really ?

Im on miui eu v12.0.3 Its good ?

Awesome! Is this really stable? Is this good for everyday use?

Joakin2k said:
Instructions say that wipe system ... Really ?
Click to expand...
Click to collapse
System partition contain os

fifi570 said:
Im on miui eu v12.0.3 Its good ?
Click to expand...
Click to collapse
Downgrade To v12.0.2
Tester Tried On v12.0.3 And Not Working

Hi , nice one sir , i managed to install it at the end i had to downgrade to 12.0.0 how is saying here Lostark13
the rom works super smooth love the RR features , brings back the memories , love to see it again
Only one problem i just found and is super important for me , is the Bluetooth . is not working , is greyed out
i saw the wifi not working and i flashed 12.0.2 and now is working , what should i do for Bluetooth to work ? or is broken from the rom ?
a to don;t forget , i miss the xpoco equaliser or how they call it Dolby sound profile . on Voice profile my phone was super loud ,

Can You Provide Me ADB Logs For Bluetooth?
It Will Help Me To Solve Bug ASAP

Beautiful! I was running RR on the OP7T, just sold that off and got the X3, great to see the rom is here as well so I won't miss my 7T so much

Anyone has link to dedicated RR chat on Telegram for the X3?

No Dedicated Telegram Group
thesign180 said:
Anyone has link to dedicated RR chat on Telegram for the X3?
Click to expand...
Click to collapse
Currently,There Is No Dedicated Group For RR Poco X3

Lostark13 said:
Downgrade To v12.0.2
Tester Tried On v12.0.3 And Not Working
Click to expand...
Click to collapse
Greetings OP.
Firstly, I wanna give huge thanks for this ROM. It is by far my favorite out of all the others I've tried. Google Pay and other apps that rely on SafetyNet worked out of the box. That is a wonderful thing especially considering how stranded I was yesterday when I couldn't buy food or petrol or pay for my car's service.
However, I have an issue with Bluetooth. I have tried your suggestion to downgrade to v12.0.2 before flashing. I have done this several times now but the issue persists.
Something else I noticed with AOSP-based ROMs is that the WiFi signal strength is never at maximum even when I am standing a few meters away from my router. And sometimes, WiFi would randomly disconnect when I am about 5 meters away from the router with 2 walls between us. Not a dealbreaker by any means, just a mild annoyance.
Thank you abundantly again for your work. I'll be sending some 'beers' your way.

Regarding Bluetooth Fix
albert0pia said:
Greetings OP.
Firstly, I wanna give huge thanks for this ROM. It is by far my favorite out of all the others I've tried. Google Pay and other apps that rely on SafetyNet worked out of the box. That is a wonderful thing especially considering how stranded I was yesterday when I couldn't buy food or petrol or pay for my car's service.
However, I have an issue with Bluetooth. I have tried your suggestion to downgrade to v12.0.2 before flashing. I have done this several times now but the issue persists.
Something else I noticed with AOSP-based ROMs is that the WiFi signal strength is never at maximum even when I am standing a few meters away from my router. And sometimes, WiFi would randomly disconnect when I am about 5 meters away from the router with 2 walls between us. Not a dealbreaker by any means, just a mild annoyance.
Thank you abundantly again for your work. I'll be sending some 'beers' your way.
Click to expand...
Click to collapse
The New Update Will Have Bluetooth Fixed And Also Some Minor Bugs Fixed Too.

Brick after installation of RR
Hi guys,
I installed this ROM yesterday. Now my Poco X3 is bricked. Any help appreciated.
What I have done (I came from MIUI with the latest updates).
Unlocked bootloader
Installed TWRP from this thread: https://forum.xda-developers.com/xi...lopment/recovery-twrp-xiaomi-poco-x3-t4167199
Booted into TWRP and did a full wipe included data (don't know exactly, but system wasn't choosable)
Pushed the Rom-zip from this thread to /sdcard/ and installed it via TWRP
After successfull installation: reboot system
But the system didn't boot. There was only the screen with "POCO" in the middle and "powered by android" on the button for ca. 1s. Then the mobile shut off.
Same for fastboot and recovery. When I hold down or hold up the volume-button while powering on, there is also the described screen for 1s, before the mobile shuts off.
Once again: Any help or tip much appreciated!

Installation Process
Cephalophinae said:
Hi guys,
I installed this ROM yesterday. Now my Poco X3 is bricked. Any help appreciated.
What I have done (I came from MIUI with the latest updates).
Unlocked bootloader
Installed TWRP from this thread: https://forum.xda-developers.com/xi...lopment/recovery-twrp-xiaomi-poco-x3-t4167199
Booted into TWRP and did a full wipe included data (don't know exactly, but system wasn't choosable)
Pushed the Rom-zip from this thread to /sdcard/ and installed it via TWRP
After successfull installation: reboot system
But the system didn't boot. There was only the screen with "POCO" in the middle and "powered by android" on the button for ca. 1s. Then the mobile shut off.
Same for fastboot and recovery. When I hold down or hold up the volume-button while powering on, there is also the described screen for 1s, before the mobile shuts off.
Once again: Any help or tip much appreciated!
Click to expand...
Click to collapse
Please Be Sure You Are On MIUI 12 v12.0.2
1.Download Rom
2.Boot Into Recovery.
3.Flash Rom Zip (No Need Of Gapps As Its Pre-Included)
4.Format Data And Click On Reboot

Lostark13 said:
Please Be Sure You Are On MIUI 12 v12.0.2
1.Download Rom
2.Boot Into Recovery.
3.Flash Rom Zip (No Need Of Gapps As Its Pre-Included)
4.Format Data And Click On Reboot
Click to expand...
Click to collapse
Thanks for the hint, but point 2. is not possible. As I wrote above there is only for 1s the screen with "POCO" in the middle, after turning the phone on (no matter, if I hold up or hold down volume during powering on). Then the mobile switches off. So I can't boot into fastboot to boot twrp.
I don't know which MIUI-Version was on the phone, before I installed RR. The latest OTA-updates yesterday were installed.
Any other hints?

Cephalophinae said:
Thanks for the hint, but point 2. is not possible. As I wrote above there is only for 1s the screen with "POCO" in the middle, after turning the phone on (no matter, if I hold up or hold down volume during powering on). Then the mobile switches off. So I can't boot into fastboot to boot twrp.
I don't know which MIUI-Version was on the phone, before I installed RR. The latest OTA-updates yesterday were installed.
Any other hints?
Click to expand...
Click to collapse
I think the problem here is that you likely flashed from 12.0.3 firmware back to the older 12.0.2 firmware which caused the brick.
Honestly, this is probably obvious for 90% of members, but developers really need to state which firmware their ROMs are build from and include these risks as a step in the instructions.

[ROM][UNOFFICIAL][matisse][millet] CypherOS 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Cypher. An extension to pure Android. Cypher tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Get your builds and changelog from our website
get.cypheros.co
Note: Builds are updated as soon as possible. There is no build cycle. Information pertaining to your device is displayed Accordingly. The current build is the latest for your device. If your device is scheduled to release on a certain day, but the new build isn't displaying, contact your device maintainer for more information but wait at least 72 h. Please know builds are updated by 12am EST.
Special Thanks to matteo0026, who is maintaining the device sources and TWRP.
Become apart of our G+ community - JOIN
REMINDER
If you're having issues and want to submit a report (Logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Features:
- Status bar Customization
- Changeable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
- Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- System
- Screenshot partial and full
- Scrolling cache customization
- Power menu customization
- One-handed mode
Credits
LineageOS
AICP
PureNexus
AOKP
Dirty Unicorns
Paranoid Android
and more..
Installation instructions :
Be sure to have installed the latest TWRP recovery (you can find it in downloads)
Download the latest build and GApps (ARM, 9.0, I advice pico package) and copy it to your external SD-Card
Make a full Backup of your Data and copy it to your external SD-Card or USB-OTG
Boot to recovery mode
Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. Format /data. When it's finished go to home page
Install > select ROM zip file > swipe to flash and when it's finished go to home page
Do the same thing to flash GApps and Root (if needed)
Reboot > System
Update instructions :
Be sure to have installed latest TWRP build
Download the latest build
Boot to recovery mode
Install > select ROM zip file > swipe to flash and, when it's finished go to home page
Reboot > System
Known issues
Mirror Screen maybe broken
Uplink to Chromecast maybe broken
Downloads (ROM)
matisse (10.1) devices: Androidfilehost, Mega
millet (8.0) devices: Androidfilehost, Mega
Matisse and Millet via Github
Other Stuff
TWRP Recovery Matisse and Millet: XDA, Mega, Matisse, Millet
GApps: https://opengapps.org/ (ARM, 11, Best to use is Nano or Pico) or
GApps: MindTheGapps
Magisk: https://github.com/topjohnwu/Magisk
Contributors:
crazydrive22, matteo0026 and all the S3NEO devs that provided the base for developing Pie on Tab 4
Source Code:
https://github.com/lineageos for samsung msm8226 common device and kernel source, with some patches coming from Gerrit for device source
https://github.com/s3neo for matisse and millet and specific variants device and vendor source
Thread started at 2021-09-24
Thread updated at 2022-01-20

New Updates for CypherOS are online.
Changelog
-Security Patch October '21
-Synced with LOS-Source
-A lot of work under the Hood from @matteo0026

Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.

Dvalin21 said:
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Click to expand...
Click to collapse
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.

crazydrive22 said:
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
Click to expand...
Click to collapse
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later

Dvalin21 said:
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Click to expand...
Click to collapse
Aye. Sometimes the Setup Wizard is causing troubles.

logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though

Dvalin21 said:
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Click to expand...
Click to collapse
Hi. I´ve tested the Issues you mentioned.
The Camera App seems to be broken or has a wrong resolution. That´s nothing i can fix but i´ll report it to the devs. As a workaround install Open Camera. This App is working normal.
I tested phonecalls (in and out) with 4G and Edge. Both are working for me.
Maybe there´s an issue with your local provider. If the problem persists, i would suggest to dl ROM and Gapps again (maybe a file is corrupted), delete your ROM in TWRP + format /data and do a clean install of both, ROM and Gapps. Often this will fix those errors.
Your logcat is looking not too bad except a crash of firebase, what definetly could cause the trouble. But we´ll see it, if you´ve done a clean and fresh installation.

Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?

Utherbone said:
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Click to expand...
Click to collapse
Yes, unfortunately 3g isn't working at any ROM from 9 to 11.
Matteo is working on it but with no success so far.

New Files are up!
-synced with LOS-Source
-Security Patch November 2021
-all Devices are now able to use WPA3

Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.

Utherbone said:
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Click to expand...
Click to collapse
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.

crazydrive22 said:
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
Click to expand...
Click to collapse
Thanks for the answer, it must be the 4.4.x bootloader, I didn't even ask if I had the 5.x.x one, I'm flashing the 5.0.2 About haimdall. It's wonderful, a point that can be negative is that the process is more manual, you must select each file for its respective partition, the good thing is that with it you can capture the pit file, it is very rare for an error to occur except if there is a problem on the PC or cable. It works on Linux and Windows and Mac OS X. I will return with news.

This is working amazing on my SM-T530NU, far better than whatever Nook bloat that was running before.

Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates. Great job

groulo said:
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates.
Click to expand...
Click to collapse
THX.
Updates every Month ca. 15th, maybe earlier.

Hello again @crazydrive22. I tested this rom, conclusions, this rom in my normal use, very usable with tricks in developer options "disable animations scale and enable acceleration 2d". Overall is good.
Sorry. I stay practice English, on this time don,t use translator

New Builds are up.
Changelog
-synced with LOS-Source
-Security Patch December 2021

I need help, I have a problem, I have gone to update and I have restarted in recovery mode, but the tablet does not start, it is in a loop restarting all the time. I have disconnected the battery and the problem continues.
What I can do?

Better Mobile App

welcome