Related
Does anyone have any TyTN case suggestions? Something with a low profile so that it doesn't add to the pocket bulk, yet still allows the keyboard to slide out?
phork said:
Does anyone have any TyTN case suggestions? Something with a low profile so that it doesn't add to the pocket bulk, yet still allows the keyboard to slide out?
Click to expand...
Click to collapse
http://www.shieldzone.com/item_description/HTCTYTNF.html
Isn't there something like this out there but that has a belt clip/holster option?
I want something where you can open the keyboard without removing anything, but that you could clip to your belt. Surely I'm not the first...
Dillsnik said:
Isn't there something like this out there but that has a belt clip/holster option?
I want something where you can open the keyboard without removing anything, but that you could clip to your belt. Surely I'm not the first...
Click to expand...
Click to collapse
How about this selection?
http://www.mobilefun.co.uk/cat/TyTN-Cases.htm
failing this I suggest you Google TyTn case
Mike
mikechannon said:
How about this selection?
http://www.mobilefun.co.uk/cat/TyTN-Cases.htm
Click to expand...
Click to collapse
Great link Mike. Any recommendations? I'm looking for a case to fit into a bad/pocket rather than on my belt.
I started with the Shield Zone treatment... full body treatment. The top was fairly unprotected. There was a piece supplied that I believe was supposed to go there, but it didn't fit. Or at least I couldn't figure out how it fit. It's a decent solution for scratching and such, but not total protection. I can also see the edges of the applied material gathering lint, dust, etc. eventually becoming really grimey.
Also, the screen protector from Shield Zone sucks. It's too thick and nearly impossible to get a clear and clean application. It also has too much drag to comfortably use the stylus. Instead, I strongly suggest the Anti-glare from Boxwave instead. Used them on other PDAs and my Treo in the past. Much better quality, easily washable and reusable, very easy on the eyes and still easily usable with a stylus:
http://www.boxwave.com/products/easyfinder/buy-best-htc-tytn-accessories_2076.htm
Earlier this week, this case showed up:
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18122&substring=tytn
It definitely provides drop/bump/scratch protection. I may rip the flip screen off since I have the Boxwave on it. But overall, it doesn't add too much bulk, makes the phone easier to hold on to and even offers a degree of splash protection. I also don't care for clips, preferring to keep my phone in a front pocket.
This phone is huge! I feel like i'm smuggling a brick when i have it in the pocket. I can't believe there is not a cover out there being made that lets you clip it, but i still haven't found it.
Dillsnik said:
This phone is huge! I feel like i'm smuggling a brick when i have it in the pocket. I can't believe there is not a cover out there being made that lets you clip it, but i still haven't found it.
Click to expand...
Click to collapse
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
mbn said:
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
Click to expand...
Click to collapse
Will that one not fit with the Hermes? This is kind of what i am looking for, but not 100%.
sickchilly said:
Earlier this week, this case showed up:
http://pdaden.com/shop/cart.php?targ...substring=tytn
Click to expand...
Click to collapse
This case is the best design i have seen as it is the only one that opens without any removal. You clip on in 2 pieces, 1 on the front and 1 for back. The keyboard will open without having to remove anything, since its 2 seperate pieces.... Now if they could just add a clip to the back of that it is perfect.
Not sure I love the holster idea b/c you still have to unclip it, and i may not want it on the belt all the time. But it may be the best bet out there, that is if its out there!
mbn said:
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
Click to expand...
Click to collapse
I received this today (12/11) from Seidio tech support:
Thank you for your interest in our products. We are expecting the new holster for Cingular 8525 available in a week later.
Thank You for contacting Seidio
also recommend the shieldzone, they have it for the HERM100 and HERM200 variants
not 100% complete cover, but enough to give you a piece of mind from minor scratches.
DeniaL said:
http://www.shieldzone.com/item_description/HTCTYTNF.html
Click to expand...
Click to collapse
mbn said:
I received this today (12/11) from Seidio tech support:
Thank you for your interest in our products. We are expecting the new holster for Cingular 8525 available in a week later.
Thank You for contacting Seidio
Click to expand...
Click to collapse
Still no Hermes holster on the seido site. I sent them an email two days ago and still have not heard back. My 8525 comes in today and really want to go the holster route..
Anyone have any additional feedback from them??
thanks in advance
-dale
Seidio Holster for 8525
The Seidio holster for the 8525 is in. I ordered one but it has yet to arrive.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=589
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
because it is nothing like it is on the picture
it is not a a belt clip case, it is some kind of "wallet case"
so i search and search....
the only cases that seems to feet is all the universal cases
but no one seems goog enouth
and seem to be imposible to find some horizontal belt clip case
so here is my find
http://www.noreve.com/category/PC+d...tui_cuir_universel_PDA_-_Large_Tradition.html
good quality
just a little large for the p6500, but good
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
so if some of you find something better, don't forget to share !
regard
Years ago compaq used to make an expandable fabric case for the 36xx ipaq. I still have mine and it fits the p6500 perfectly. I don't know if it's still possible to acquire it.
Ultimate Sedna Case
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
kwburress said:
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
Click to expand...
Click to collapse
The P6500 has a bit rounded backsight, so if u tap on the display the HTC waggles. Is this problem solved with the PielFrama?
axle7517 said:
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
Click to expand...
Click to collapse
So did I ... also bought/sent back numerous other cases that were either too big or just plain garbage
axle7517 said:
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
Click to expand...
Click to collapse
I finally found & bought one of these from PDAir
They do two or three of them but this one was what I was after, just something to carry it around & clip on me belt
I have one of the ones that kwburress wrote about and found it to be an excellent piece of workmanship, but, I also found that PDAir have some aluminium cases which are handy as well. Thanks to both Prospro and kwburress for their input...
http://www.otterbox.com/htc-cases/htc-p6500-cases/htc-p6500-defender-case/
we use the otterbox, it's great if you need a rugged case for ultimate protection.
Hi Guys
Has any one of you tried this Amzer belt clip case for his/her N3....????
Well I would like to mention one more thing that I have used the case of this manufacturer first time ever...and m really pleased to buy this one....the quality of this belt clip is just awesome....I use it at my work place and even in long daily run too and it really makes me feel worry free regarding my N3.....the toughness of this belt clip is the material of being tested I have checked it with many other belt clip owners and in all the case it did justice with me :good:...so I am really impressed and excited about this product quality and have also dropped a mail to the manufacturers(Amzer) to discuss about the material they have used for creating it....
Is there any one who has tried this one or the similar one...having some great experience.....???
Please do post and share your experience ...
Don't have one for my note 3. This is the first I've seen of it though this is what I've been waiting for.
I've used them on my previous phones, galaxy s4 and droid razr maxx hd. They work well. Have to be careful not to break the clips for the kickstand (they're just two tiny dots).
Fairly sturdy too.
I never used the belt clip though.
kudosmog said:
Don't have one for my note 3. This is the first I've seen of it though this is what I've been waiting for.
I've used them on my previous phones, galaxy s4 and droid razr maxx hd. They work well. Have to be careful not to break the clips for the kickstand (they're just two tiny dots).
Fairly sturdy too.
I never used the belt clip though.
Click to expand...
Click to collapse
Well I have created this thread just to depict its blet clip quality because I have also used this kind of belt clip case on my previous phones but the quality of belt clip was not that much fine enough to go on for a long time...but after using this case I can say the toughness of this belt clip is really the one to be trusted and I have also mentioned in my above post that I am trying to contact the operations person or the CEO as if which product material they are using for the belt clip as it is really tough and strong one....so just waiting for a reply and will surely update you whatever they revert......
I don't have this case but i bought similar ones for my note 2 and note 1 and i only used holster/ belt clip not the case itself because the case doesn't protect the phone that much, the TOP and the Bottom of the phone is not covered so i would use a TPU case with that Holster.
Since i need a belt clip for my phone, i am gonna buy this coz you recommend that it has better belt clip and thats what i need not the case.
mha1021 said:
I don't have this case but i bought similar ones for my note 2 and note 1 and i only used holster/ belt clip not the case itself because the case doesn't protect the phone that much, the TOP and the Bottom of the phone is not covered so i would use a TPU case with that Holster.
Since i need a belt clip for my phone, i am gonna buy this coz you recommend that it has better belt clip and thats what i need not the case.
Click to expand...
Click to collapse
Yes as per my experience and usage I will strongly recommend that belt clip one....as I have also used the many but I find this one much better one.....So I would recommend you to go for it.....:good:
Jimmy2u said:
Hi Guys
Has any one of you tried this Amzer belt clip case for his/her N3....????
Well I would like to mention one more thing that I have used the case of this manufacturer first time ever...and m really pleased to buy this one....the quality of this belt clip is just awesome....I use it at my work place and even in long daily run too and it really makes me feel worry free regarding my N3.....the toughness of this belt clip is the material of being tested I have checked it with many other belt clip owners and in all the case it did justice with me :good:...so I am really impressed and excited about this product quality and have also dropped a mail to the manufacturers(Amzer) to discuss about the material they have used for creating it....
Is there any one who has tried this one or the similar one...having some great experience.....???
Please do post and share your experience ...
Click to expand...
Click to collapse
Can you post pictures of the actual item on your phone? I'd like to see this case and not just the stock website photo. Thanks!
Where to buy...??? Can you please post the link...??? Thank you...
This is the exact one they sell at the Verizon store. They are alright but the top and bottom aren't protected.
Sent from my SM-N900V using Tapatalk
kuroy301 said:
Where to buy...??? Can you please post the link...??? Thank you...
Click to expand...
Click to collapse
Check out their.... it is available for free shipping too.... :good:
http://www.fommy.com/view-full-page...el=Samsung+GALAXY+Note+3+SM-N9005&skuno=96226
Euforeik said:
This is the exact one they sell at the Verizon store. They are alright but the top and bottom aren't protected.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yes it is the same one....yes its not that much covered from top and bottom as I was looking for a sturdy belt clip case one for me so there it goes much better on comparison to other one available in the market and moreover it does not even hamper the screen on putting it on table from screen side ...not so much pricey even ...so its worth of its cost to go for it on behalf of considering the product quality....
Howdy,
I've been searching but still have yet to come across a decent belt clip/case combo. The only ones I've come across are way too bulky or the phone hangs face out (Armor-X & Nagebee). The best I've had ever was by Seidio for a OnePlus 2 (https://www.amazon.com/Seidio-Kickstand-Belt-Clip-Holster-OnePlus/dp/B015EF3A34), but it doesn't look like they're going to do one of the OP5.
https://www.armor-x.com/tp-pl5-bk-a...roof-protective-case-belt-clip-carabiner.html
https://www.amazon.com/dp/B073DK5BHY
Anyone come across anything that may work?
Thanks!
I have been using the seidio note 4 holster for my op3 and now my 5.
It is a little loose in it with just a bumper case but it does what it needs to do. I have several of these holsters from my GN4 days and boy have they comes in handy. I can use practically any case and it will work.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Thanks gshadow, I'll give that a try.
Just wish Seidio would come out with a case for the OP5.
Well here's an update to this.
Here's my solution for a clip combo case.
-siedio holster for note 4
-drental op5 dual layer case with kickstand
Pictures that I needed to edit ?
Now there's going to be a mad rush of people buying up all the note 4 holsters. Too bad I got them all lol joke
I sent a message to Seidio and they said they have no plans to make the dilex case for the 5/5T, which is truly unfortunate because it is several orders of magnitude above the armor-x case. They did say they would pass the request up to their dev team, though, so if you add your voice it might encourage them to produce one...
I too have been wishing for a Seidio case for my beloved OP5! :crying:
The LG G4 Platinum Series holster works great with a minimal case.
Greets All, I have been doing quite a bit of searches, but I havent been able to find a Phone case I bought of my Honor Note 8, it would fit the Mate 20x, so I am seeing if anyone might have run across anything like this, or if you do if you could let me know. The last time I picked it up from Amazon, but its no longer available. Here is what it looks like:
https://www.amazon.com/gp/product/B01M28CR8C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
AngelDeath said:
Greets All, I have been doing quite a bit of searches, but I havent been able to find a Phone case I bought of my Honor Note 8, it would fit the Mate 20x, so I am seeing if anyone might have run across anything like this, or if you do if you could let me know. The last time I picked it up from Amazon, but its no longer available. Here is what it looks like:
https://www.amazon.com/gp/product/B01M28CR8C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just received this today and it fits perfectly with the Huawei kickstand case. I bought a couple of other cases but this one fits the best so far so those other ones are going back.
https://www.amazon.com/Yuzihan-Holster-iPhone-Defender-Battery/dp/B07FYBZ3RT
Here's more pics
Nice But I am also looking for the swivel clip. I just ordered two from amazon we'll see if they will be big enough. I already have a leather one thats horizontal except the belt clip is a pain to get on my pants. I'll post the ones coming in if they work.
I found a few that I wanted to share with everyone in case anyone is interested:
This Case:
https://www.amazon.com/gp/product/B07HDCTWQ9/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Will work with no case, the clear case Huawei provides, and works with the following case:
https://www.ebay.com/itm/Dooqi-Luxu...var=532520095938&_trksid=p2057872.m2749.l2649
And possibly my guess and slim design case.
https://www.amazon.com/gp/product/B07HCL6M2C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This one works without a case or the clear one provided by huawei, will not work with thick or rugged cases.
All of these holsters for the iPhone Xs Max are only 6.5" interior length, but the Mate 20 X is 6.78" long
frcraig said:
All of these holsters for the iPhone Xs Max are only 6.5" interior length, but the Mate 20 X is 6.78" long
Click to expand...
Click to collapse
I understand that, but I bought them and they do work, if you'd like I'll post pics.
thank you for the clarification I wasn't sure if you were simply recommending these after having done some research or whether you had actually tried your phone in some of them. I assume then that the flap has some flexibility to permit the slightly longer length of this phone.
frcraig said:
thank you for the clarification I wasn't sure if you were simply recommending these after having done some research or whether you had actually tried your phone in some of them. I assume then that the flap has some flexibility to permit the slightly longer length of this phone.
Click to expand...
Click to collapse
No Problem, I wouldn't have posted them if I didnt try them. And yes there is a little play with the flap. I do have two more leather horizontal cases that work also, but dont have swivel belt clips and I have for emergencies when the belt clips break on the swivel ones. I'm pretty rough on them.
I just bought this
https://www.tvc-mall.com/details/6-3-6-9-inch-horizontal-style-universal-pu-leather-case-with-belt-clip-for-men-size-17-5-x-8-7-x-1-8cm-sku104800633a.html
And I just bought my Mate 20 X.
All of them should arrive next week. At that point, I'll let you know how everything fits with pictures and words and everything in between (...is there anything in between?).
I found a horizontal leather belt holster in which the Mate 20X fits really well (even with a case on the phone).
Here's my setup.
The kickstand case:
https://www.amazon.com/gp/product/B07KWWMDSK/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
The leather belt holster:
https://www.amazon.com/gp/product/B0727PLG7Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
(edited to add one more photo)