First download this file:
zui 11.1.021 qpst version
twrp chinese version
zui 11.5.141 OTA version
zui 11.5.182 OTA version
zui 11.5.199 OTA version
Follow This STEP:
Read This Tutorial how to use qfil, but use zui 11.1.021 qpst version for flashing
After boot into ZUI 11.1.021, finish activating etc, reboot into bootloader, and unlock bootloader Read This Tutorial
Then go back into bootloader again, and flash twrp chinese version , Read This Tutorial and DO NOT FLASH MAGISK
From bootloader select recovery and boot into twrp
After boot into twrp, copy 3 OTA files into phone storage using ADB or using MTP or OTG flashdisk
Inside twrp, click install then select zui 11.5.141 OTA version and flash it
After finish, click back button, then select zui 11.5.182 OTA version and flash it
Again after finish, click back button, then select zui 11.5.199 OTA version and flash again
Don't click reboot system after flash, just click back button until goes back into main menu, select reboot then select bootloader, you will boot into bootloader and see bootloader status is locked, then read again This Tutorial to unlock bootloader after that wait until the phone boot into 199 version, finish activating etc, and boot again into bootloader
Open folder zui 11.1.021 qpst version and find recovery.img inside there, and flash it the same way as you flash twrp
After that follow This Tutorial to lock bootloader (read the last/bottom tutorial )
Two options will show up, and select lock bootloader
Wait until finish, and now you have 199 version with locked bootloader.
I have been test this almost 3 days, and testing every feature inside this version, but since i'm not using this phone as daily driver, so i can't test all things (like 3rd party apps) atleast google apps have no problem for me.
Don't thanks for me only, since i did this based on other works
So Every THANKS and CREDITS must be go into Original Author
Original Link:
4pda firmware forum
11.1.021 qpst forum
twrp forum
11.5.141 forum
11.5.182 forum
11.5.199 forum
DO IT OWN YOUR RISK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what if I'am already on 11.1.0.21 st all stock no magisk with unlock bootloader can I skip step 1 and 2?
imfuzzyyy said:
what if I'am already on 11.1.0.21 st all stock no magisk with unlock bootloader can I skip step 1 and 2?
Click to expand...
Click to collapse
yes, as long as you not modified any in system
squadzone said:
yes, as long as you not modified any in system
Click to expand...
Click to collapse
yes I didn't modified anything this is from zui 10.5 then via OTA I just uninstalled those chinese apps is it ok? gonna flash later when after work
How come when im starting to update from 11.0 to 11.141 via twrp it says error 7 cant update?
Thanks for the summary of your installation, will you keep the thread updated? because I would like it!
just want to give update I successfully updated to 199 via this guide though I am already 11.1.0.21 and unlock BL I skip step 1 and 2 thank you for this wonderful guide
"Your device is corrupt. It can't be trusted and will not boot". tried 3 times and this message pops up. it will boot after i unlock the bootloader.
error 7
Pe3033 said:
How come when im starting to update from 11.0 to 11.141 via twrp it says error 7 cant update?
Click to expand...
Click to collapse
yeah same problem to
rick shinoda said:
yeah same problem to
Click to expand...
Click to collapse
I guess after you flash 11.1.021 you need to boot first on your home screen and set a passcode and fingerprint then go to twrp and flash those OTA, please update us if this method works
On my one everything works except locking bootloader .
No command is working for my devices?
Fastboot flashing lock -no work
Fastboot -i 0x2b4c oem lock - waiting for devices
I stuck temporary with 11...021 with lock bootloader after QFIL flashing.
And no any OTA update?
Any idea why fastboot command not working ?
Abang_ said:
On my one everything works except locking bootloader .
No command is working for my devices?
Fastboot flashing lock -no work
Fastboot -i 0x2b4c oem lock - waiting for devices
I stuck temporary with 11...021 with lock bootloader after QFIL flashing.
And no any OTA update?
Any idea why fastboot command not working ?
Click to expand...
Click to collapse
Im a little bit confuse why you need to lock bootloader where you already on a locked bootloader on 11.1.021?
I did all steps until step 9. Can I stop here if i want to have an unlocked bootloader?
I have the 223 update via OTA but installation failed after downloading maybe Im guessing the recovery from 11.1.021 is not comptible for this update can you please check so we can flash the correct recovery for this update?
Has anyone installed update 11.5.223? Is Google certification still working?
imfuzzyyy said:
I have the 223 update via OTA but installation failed after downloading maybe Im guessing the recovery from 11.1.021 is not comptible for this update can you please check so we can flash the correct recovery for this update?
Click to expand...
Click to collapse
yes, you cant update OTA since fingerprints build in recovery is still 11.1.021, wait till they release zui 11 recovery or do it again using twrp
I am currently on 11.5.182, unlocked bootloader with TWRP and Magisk installed.
Has anyone updated using TWRP to 199 then to 223? I understand that in order to do this, one must uninstall Magisk and restore to stock boot.img.
rick shinoda said:
yeah same problem to
Click to expand...
Click to collapse
my mobile is in loop , i dont know what i do to fix
---------- Post added 11th April 2020 at 12:09 AM ---------- Previous post was 10th April 2020 at 11:31 PM ----------
i try do this process but before pass last rom 199 shows me ERROR 7 , after error my phone is loop on Lenovo screen in version zui 11.5.182 i try use qfil to recovery but no sucess i dont know do to fix this trouble HELP ME
if better emailme [email protected]
No problem
IcaroMacier said:
my mobile is in loop , i dont know what i do to fix
---------- Post added 11th April 2020 at 12:09 AM ---------- Previous post was 10th April 2020 at 11:31 PM ----------
i try do this process but before pass last rom 199 shows me ERROR 7 , after error my phone is loop on Lenovo screen in version zui 11.5.182 i try use qfil to recovery but no sucess i dont know do to fix this trouble HELP ME
if better emailme [email protected]
Click to expand...
Click to collapse
Try do this tutorial. My phone no more issue error 7, if using this tutorial.
https://4pda.ru/forum/index.php?showtopic=973179&view=findpost&p=94840662
---------- Post added at 02:44 AM ---------- Previous post was at 02:42 AM ----------
Now i use lineage os 17 better than zui 11.5
squadzone said:
yes, you cant update OTA since fingerprints build in recovery is still 11.1.021, wait till they release zui 11 recovery or do it again using twrp
Click to expand...
Click to collapse
So locking the bootloader is useless since we cannot update using this recovery now we need to unlock again and flash the needed recovery and relock again wew what a pain. I guess you need to remove that step in locking the bootloader again since theres no point in doing that
Related
Support to issues will no longer be considered as i don't own the device now
thread will be closed as soon as moderators respond to my request of removal of this thread
WARNING: this method of rooting voids your phone's warranty
because you can flash system as usual and as it used to be, so don't worry
root with your own risk
this method works for WW SKU(i don't know about other SKU images but you can always give a try if you are on other SKU)
here am posting two methods of rooting
whatever the method it is , all we need is our zenfone 5 to be rooted. right??
one is root process by shakalaca and you can find his post here(use google translate in his page)(you can find the english translated here in the end of this post)
the second process is here as i posted below
make sure you have adb n fastboot drivers, intel mobile usb drivers, asus usb drivers
usb debugging must be turned on(settings-->developer options)
to get developer options goto settings-->about-->build number(tap on it 7times) now go back n u will find developers options
first of all download the bootloader.zip attached below
download SuperSU flashable zip attached below and place this UPDATE-SuperSU-v2.02.zip file into your internal storage(lets flash it later why so hurry?)
extract the bootloader.zip and place the extracted files in your adb or fastboot folder(or simply place them in c:\users\xxx )
turn on the usb debugging option(settings-->developer options-->usb debugging)
connect your zenfone 5 to your windows pc
open command prompt on your computer and run these following commands
adb devices(you will see your device serial number)
adb reboot-bootloader(now your device will boot(startup) in droidboot menu
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg_unlock.bin
now your bootloader is unlocked so that we can flash custom recovery
best part: it is unofficial bootloader unlocking and when you update the next firmware via OTA the bootloader relocks by itself(yep you will receive OTA updates even after this)
my bootloader relocked after OTA update ofV2.19.40.18 n it relocked my bootloader
now i hope u unlocked your bootloader
download this recovery recovery_philz_t00f.tar(attached below)
extract it and you wil find the recovery_philz_t00f.img file
place that recovery in your fastboot folder and run these following commands
fastboot reboot-bootloader
fastboot devices (just to make sure your device is connected)
fastboot flash recovery recovery_philz_t00f.img
give it time to write the recovery( takes 3-4 seconds)
now that you have philz recovery
now run this command
fastboot reboot-bootloader
now your Zenfone reboots to bootloader menu and select recovery option by scrolling down(use volume-) and select( use power button)
u can disconnect your device now and u are in recovery
the recovery is a little bit laggy but works fine
select the option install zip from sd card
select the UPDATE-SuperSU-v2.02.zip file that u placed in your internal storage earlier
now you have options to say yes or no.. select yes and let the recovery flash SuperSU
I hope u have flashed successfully
now opt for reboot system now
guess what your ZenFone is rooted Buddy
check it using any root checker app or install any root related app or you can check that SuperSU is working without any error
screenshots????
well attached below for proof
Want to relock the bootloader??
i suggest you not to relock the bootloader coz the OTA update relocks the bootloader automatically
still want to relock bootloader?
read below posts before relocking the bootloader because some members faced problems
here you go
refer to this link
http://www.asuszenfoneblog.com/2014/09/how-to-relock-bootloader-on-asus-zenfone.html
Stuck at USB logo????
WELCOME BACK
here is the solution:
flash this modified stock recovery https://www.dropbox.com/s/xvauuk0tzid1o3i/1.18.40.9_ww_recovery.img?dl=0 in droidboot menu
fastboot flash recovery <filename>.img (filename can be anything or the name of recovery you downloaded from above)
download the last JB update package V1.18.40.10
now goto recovery n wipe data/cache
then sideload the JB update package V1.18.40.10(how to sideload????? explained below)
it will work for sure
after updating wipe data n cache again
now reboot system n go through initial setup n everything will be fine
well you will be on JB now but if you want Kitkat then sideload the Kitkat update package
and follow the root process from the beginning
finally i suggest you not to relock the bootloader because when you sideload the update it will relock the bootloader)
OTA updates are available after rooting by this process
yes OTA updates are still available(even if the bootloader is unlocked)
image attached below to show ota update
i got OTA update of 2.19.40.18_20141003_8008 release-keys and downloaded it n updated successfully without any issues
if you can't find OTA update from your ZenFone 5 then download the update package from asus website
whenever you get OTA update check for ASUS website and download the package from there
here is the link to asus website for downloading future updates http://www.asus.com/in/Tablets_Mobile/ZenFone_5_A500CG/HelpDesk_Download/
there just click on select OS and select android and then you will find the update packages
after downloading the package extract it and u will fing another zip of name like UL-ASUS_T00F-WW-2.19.XX.X-user.zip
place that .zip file in your internal storage and the system detects it as update file and notifies you whether to update
if it fails then sideload the update via ADB
applying OTA updates via adb
Just download the package from the ASUS website stated above(click on the link)
place the package UL-ASUS_T00F-WW-2.19.XX.X-user.zip to your adb or fastboot folder
now enter into droidboot menu(power off your phone and hold power button+volume up till you see droidboot menu) of your Zenfone 5 and connect it to your PC
now scroll down(use volume keys) to recovery and select it(use power key) and your phone will boot to recovery
now that you are in recovery(you can see a droid symbol lying down with red triangle over its stomach)
press n keep holding volume down button, press volume up button(press vol+ button while still vol- button holding)
now you will see recovery commands
scroll to apply update from ADB
now open the command prompt on your PC and type this following command
adb sideload UL-ASUS_T00F-WW-2.19.XX.X-user.zip
now wait for the process to complete till 100%
now the system update starts and HURRAY you just updated the firmware successfully
(if you have installed xposed framework or Lucky Patcher then you have to follow these steps before updating 2.19.40.18_20141003_8008 release-keys)
for those who have xposed installed on Zenfone 5 the latest update will fail
but here is the solution for that
open the .zip package of firmware you have present on your Zenfone 5
for example the UL-ASUS_T00F-ww-V2.19.40.6-user.zip
open it using winrar and navigate to system/framework
find the files core.odex
core.jar
services.jar
services.odex
drag them out on your desktop
now copy them into your internal storage
now use a file manager like ROOT EXPLORER and navigate to /system/framework
delete the core.odex
core.jar
services.jar
services.odex files because these are patched by xposed framework and wont let the system to update
now after deleting the patched files
move the files
core.odex
core.jar
services.jar
services.odex files you dragged from zip package and pasted in your internal storage to the folder/system/framework and change the permission to like this rw-r--r--
image attached below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for all the four file(now you restored all the system actual files)
now update it using OTA or by ADB SIDELOAD it wont give you any error
i did this and i updated sucessfully
you will lose root access for the first boot but dont worry
reboot your device again and you will get back the root access
happy updating
root process by shakalaca
enable USB DEBUGGING in settings-->developer options
now download this package root by shakalaca and open in your windows pc
extract it and connect your Zenfone to pc in normal mode
do not remove or unplug your zenfone during this process
now double the root-zenfone-5-ww.bat(select tw if your SKU is TW or CHT if its CHT SKU)
follow instructions
now sit back and relax
dont panic during this process your zenfone reboots many times(like 6 times i guess)
and when it says finished just look out for SuperSU in your App Drawer
and yes you are rooted
sorry for grammatical errors(if any)
After done this.. have u done relock bootloader?
Do u think we still can get/do ota/sideload update whenever available later?
Updates:
Well good to know u've removed step to use official Asus apk to unlock bootloader in ur guide. So my reply posted in this thread r no longer relevant bcoz all of it regarding question on that official apk. Glad u finally accept my suggestion not to use that apk since we can unlock bootloader via adb (unofficially), & most important it is safer for our device (by not sending any device id such as imei etc to Asus) :good::good::good:
yeah, have you ever tried to relock your zenfone 5? using that app too? or another app?
Nice! Finally updated rooting method for Zenfone 5 (KitKat). Thanks for sharing.
Sent from my ASUS_T00J using XDA Free mobile app
vnzdeath said:
yeah, have you ever tried to relock your zenfone 5? using that app too? or another app?
Click to expand...
Click to collapse
yep i tried relocking
i even got ota update of V2.18.9.40.18
screenshot attached below
remove .zip extension and rename it to .jpg extension
Enjoy
bbadilla11 said:
Nice! Finally updated rooting method for Zenfone 5 (KitKat). Thanks for sharing.
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
hit thanks button if it helped you in rooting
enjoy being rooted
:good: :good: :good:
yeah here you go
k0m3n9 said:
After done this.. have u done relock bootloader?
Do u think we still can get/do ota/sideload update whenever available later?
Click to expand...
Click to collapse
vnzdeath said:
yeah, have you ever tried to relock your zenfone 5? using that app too? or another app?
Click to expand...
Click to collapse
read the first post
Does it need to be online?
Guys.. when ya run UnLock_A500CG_a500cg_platform_rel.apk, does it require u to be online? Have someone check what it can access that mentioned during waiting u to proceed with installation.
k0m3n9 said:
Guys.. when ya run UnLock_A500CG_a500cg_platform_rel.apk, does it require u to be online? Have someone check what it can access that mentioned during waiting u to proceed with installation.
Click to expand...
Click to collapse
yes you need to be online at least at the last stage of UnLock_A500CG_a500cg_platform_rel.apk where you see the unlock button in the last step of unlocking bootloader
don't worry about wifi issues or data issues because it wont give you any wifi issues or data issues after unlocking bootloader
How about putting the original black asus boot logo? is there a way for that?
cgren said:
How about putting the original black asus boot logo? is there a way for that?
Click to expand...
Click to collapse
i don't know how to bring back that logo on boot
sorry
How to re-lock bootloader??
Sent from my ASUS_T00J using XDA Free mobile app
RajGopi said:
i don't know how to bring back that logo on boot
sorry
Click to expand...
Click to collapse
Even if i flash with Stock Firmware will i get white asus boot?
---------- Post added at 04:21 AM ---------- Previous post was at 03:45 AM ----------
I just flashed with stock KK everything went back to normal.... boot is black again hehe.
Where did u get the stock Kitkat?
Sent from my ASUS_T00J using XDA Free mobile app
to relock the bootloader
Extract the recovery.img,fastboot.img and boot.img from the update package and flash them using fastboot commands
it ensures that all system files are flashed back before relocking the bootloader
if you done all above then refer to this link
http://www.asuszenfoneblog.com/2014/09/how-to-relock-bootloader-on-asus-zenfone.html
or here it is
drag out the ifwi.zip file from the update package like UL-ASUS_T00F-WW-2.19.40.10-user.zip
from the ifwi.zip file drag dnx_fwr_ctp_a500cg.bin and drag out ifwi_ctp_a500cg.bin
then open your command prompt and run the following commands
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg.bin
fastboot reboot-bootloader
It relocks your bootloader
Sent from my ASUS_T00J using XDA Premium 4 mobile app
cgren said:
Even if i flash with Stock Firmware will i get white asus boot?
---------- Post added at 04:21 AM ---------- Previous post was at 03:45 AM ----------
I just flashed with stock KK everything went back to normal.... boot is black again hehe.
Click to expand...
Click to collapse
You mean u flashed the UL_ASUS-T00F-WW-2.19.40.10-USER.ZIP flashed again and you got black logo back???
Sent from my ASUS_T00J using XDA Premium 4 mobile app
Yup it did, but it messed up my Root... so i flashed recovery v17 then V18 firmware. then Manual Update via ADB
Help.
unknown partition 'recovery_philz_t00f.img'
error: cannot determine image filename for 'recovery_philz_t00f.img'
I follow this TUT for rooting and i succeeded but just ask if i can update via OTA??
Sent from my ASUS_T00J using XDA Free mobile app
yep
kennybajande31 said:
I follow this TUT for rooting and i succeeded but just ask if i can update via OTA??
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
read the first post
answer is in there
I don't own or created this mod.it's look like this mod was created by unofficial Xiaomi Distributor to flash modified rom that included GApps thats marketed outside of China.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Installation :
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
2. Rooted device
- download FX File Explorer
- download FX File Explorer (Root Add-On)
- download file ido-aboot-mod-image.zip
- extract ido-aboot-mod-image.zip,copy aboot and abootbak to /dev/block/bootdevice/by-name
Workaround for official full rom flash:
- miflash/fastboot -> follow installation method for unrooted device
- updater/recovery -> after rom installation flash ido-aboot-mod-image.zip from TWRP
! ! ! WARNING ! ! !
If currently installed ROM is Official MIUI ROM , DO NOT ENABLE SYSTEM MODIFICATION in TWRP. refer to this thread if you want to make modification to the system(root/gapps/xposed/etc)
Click to expand...
Click to collapse
Quoted from official TWRP page :
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
differences between locked/unlocked/modified bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
locked bootloader : failed to flash/boot twrp recovery
locked bootloader : successfully flash/boot twrp recovery
modified bootloader:successfully flash/boot twrp recovery(even "device unlocked:false")
Source :
Original MIUI thread : http://en.miui.com/thread-276565-1-1.html
4pda forum post : http://4pda.ru/forum/index.php?showtopic=741257&st=1640#entry49599609
Official TWRP : https://twrp.me/devices/xiaomiredmi3.html
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
churchino said:
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
Click to expand...
Click to collapse
It's look like you have boot normally before entering recovery mode.your should be able to flash in fastboot mode now.why don't u try to flash twrp in fastboot mode.
Sent from my D5503 using Tapatalk
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
atiprusma said:
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
Click to expand...
Click to collapse
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Has anyone confirmed this to work? I'm on the Chinese Stable 7.3.2.0 ROM but planning to flash Xiaomi.eu or CM12.1 in the future. I would like to know if anyone has experience with flashing Xiaomi.eu with this TWRP; so I will probably use this method if unlocking my phone through the official way fails.
[email protected] said:
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Click to expand...
Click to collapse
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
puppet13th said:
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
Click to expand...
Click to collapse
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
bloodvayne said:
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
Click to expand...
Click to collapse
If that was official MIUI rom,you should install auto-bootimg.
Sent from my D5503 using Tapatalk
puppet13th said:
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
I assume if multirom was modified the official stable rom i flashed before and I did flash the autoboot-img, but the mistake i also did is allowing modifying system at the first twrp screen.
And now i just flashed with manIT dev global rom by miflash.
And it will have the original mi recovery i'm sure.
Sent from my Redmi 3 using Tapatalk
im a bit confused about the steps to do? could you please do the tut more step by step your noobs ?
so it's rooted when we finish (SUPERSU included)?????
do you know can it avoid root checking (such as Puzzle & Dragon Japanese verison)?
Someone confirmed work with Redmi3 Pro (international version), help me here
http://en.miui.com/thread-282476-1-1.html
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
so. do i need to unlock bootloader in offical way to flash other custom roms?
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
jpg3927 said:
so. do i need to unlock bootloader in offical way to flash other custom roms?
Click to expand...
Click to collapse
all the answer already in the 1st post.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Click to expand...
Click to collapse
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
i think there is no DM verity in custom rom.
Paleskin said:
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
Click to expand...
Click to collapse
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
Click to expand...
Click to collapse
everytime I tried to access download mode, it only give blank black screen and when I connect it to the computer, nothing shows up
This is the LG G6's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Install APKs
Uninstall APKs
Take a Screenshot
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Good Job!
TheWolfSVK said:
Good Job!
Click to expand...
Click to collapse
Thanks, have you tried it?
mauronofrio said:
Thanks, have you tried it?
Click to expand...
Click to collapse
Downloading it atm
Anyone tried this on LG G6?
This can relock G6 bootloader like for warranty purpose?
Which functions are available/unavailable for G6
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
mauronofrio said:
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
Click to expand...
Click to collapse
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
outlawman007 said:
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
Click to expand...
Click to collapse
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
mauronofrio said:
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
Click to expand...
Click to collapse
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ...OR maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time ...
outlawman007 said:
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ,or maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time...
Click to expand...
Click to collapse
The command is there but you can brick your phone. I think you need of a QFIL stock rom to relock bootloader. But i think Lg has a database with all device unlocked...
Awsome tool!
It would be cool if we could lock the bootloader without fear of the dreaded brick
tron4200 said:
It would be cool if we could lock the bootloader without fear of the dreaded brick
Click to expand...
Click to collapse
Yes sure, when there will be a safe guide, it will also be safe to lock the bootloader
Will give this a try once someone has tried it some more.
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
galerio said:
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
Click to expand...
Click to collapse
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
mauronofrio said:
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Click to expand...
Click to collapse
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
galerio said:
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
Click to expand...
Click to collapse
Format data from twrp
@mauronofrio Ok, I solved and reinstalled from scratch everything. What went wrong, I think, is that after TWRP installation I haven't installed Magisk immediately.
Using a tool like your can induce people to just push a button and not follow every step of a good unlocking procedure. Anyway, it was my fault. Your tool works perfectly
Hi,
I just updated my HW Mate 10 pro to the latest version which includes face recognition. It worked as expected until I rooted the phone with FHMate10Tool. I tried using another method called Magisk but I got an error when trying to apply it through TWRP so I couldnt proceed with this method.
Anyways, after rooting, I get an error saying that my facial features werent recognized, in simple words, front camera wont open, therefore, it wouldnt work.
I even tried to unroot but even after doing factory reset, I can't seem to make it work.
Any thoughts? Please see PS below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your help!
What your version and model? Mine work fine with magisk root.
maxkento said:
What your version and model? Mine work fine with magisk root.
Click to expand...
Click to collapse
Thanks for your reply.
Model: BLA-L29
Build Number: BLA-L29 8.0.0.135(C605)
EMUI Version: 8.0.0
The weird thing is that I ran a factory reset to remove any root stuff and I still cannot use the face unlock feature due to the error mentioned above.
I had the phone rooted and bootloader unlocked and worked until I rooted the phone.
jeinnerabdel said:
Thanks for your reply.
Model: BLA-L29
Build Number: BLA-L29 8.0.0.135(C605)
EMUI Version: 8.0.0
The weird thing is that I ran a factory reset to remove any root stuff and I still cannot use the face unlock feature due to the error mentioned above.
I had the phone rooted and bootloader unlocked and worked until I rooted the phone.
Click to expand...
Click to collapse
Is this the original firmware or you rebrand the rom?
Hi, I am on BLA-L29 800142(C432)stock & rooted phone with Magisk V16. Face unlock still running without any problems. Maybe it has something to do with the FH rooting tool?
maxkento said:
Is this the original firmware or you rebrand the rom?
Click to expand...
Click to collapse
Original firmware. OTA update.
How your stock camera? Does that work with the front facing?
jeinnerabdel said:
Thanks for your reply.
Model: BLA-L29
Build Number: BLA-L29 8.0.0.135(C605)
EMUI Version: 8.0.0
The weird thing is that I ran a factory reset to remove any root stuff and I still cannot use the face unlock feature due to the error mentioned above.
I had the phone rooted and bootloader unlocked and worked until I rooted the phone.
Click to expand...
Click to collapse
It's because of FH Root tool.
Download your stock ramdisk from here: https://mega.nz/#!BWxElaRA!lUb-u-jXaPSAN8OrbyG4tEKCWttvqPxMPOVBn6h1PRY
Then flash it using 'fastboot flash ramdisk RAMDISK_BLA-L29C605B135.img'
Then flash Magisk from TWRP.
Factory reset only resets /data, root is kept in your ramdisk (Well. App is kept in /data, but it's just an app.)
maxkento said:
How your stock camera? Does that work with the front facing?
Click to expand...
Click to collapse
Yes, both cameras work as expected. The only flaw is for the face recognition for unlock.
ante0 said:
It's because of FH Root tool.
Download your stock ramdisk from here: https://mega.nz/#!BWxElaRA!lUb-u-jXaPSAN8OrbyG4tEKCWttvqPxMPOVBn6h1PRY
Then flash it using 'fastboot flash ramdisk RAMDISK_BLA-L29C605B135.img'
Then flash Magisk from TWRP.
Factory reset only resets /data, root is kept in your ramdisk (Well. App is kept in /data, but it's just an app.)
Click to expand...
Click to collapse
Thanks for your help on this. I just flashed the ramdisk as you told me to. By any chance, do you have the URL to instructions to root with this method? Ive found a few but they dont seem to work for me.
Thanks once again!
jeinnerabdel said:
Thanks for your help on this. I just flashed the ramdisk as you told me to. By any chance, do you have the URL to instructions to root with this method? Ive found a few but they dont seem to work for me.
Thanks once again!
Click to expand...
Click to collapse
Flash TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Flash Magisk 16 in twrp: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Or get the 16.4 beta: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
That's all there is to it
ante0 said:
Flash TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Flash Magisk 16 in twrp: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Or get the 16.4 beta: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
That's all there is to it
Click to expand...
Click to collapse
I just confirmed that after adding the boot image you provided, I get an error stating that there's no boot image (error when trying to get into recovery mode). The good thing is that the phone can boot normally to Android, it just freaked the cr#p out of me!
jeinnerabdel said:
I just confirmed that after adding the boot image you provided, I get an error stating that there's no boot image (error when trying to get into recovery mode). The good thing is that the phone can boot normally to Android, it just freaked the cr#p out of me!
Click to expand...
Click to collapse
It's the stock ramdisk for your firmware, so it shouldn't cause any problems. However, if you have no recovery_ramdisk or it's incorrect it wouldn't be able to get to recovery.
Flash twrp using fastboot flash recovery_ramdisk twrp.img
ante0 said:
It's the stock ramdisk for your firmware, so it shouldn't cause any problems. However, if you have no recovery_ramdisk or it's incorrect it wouldn't be able to get to recovery.
Flash twrp using fastboot flash recovery_ramdisk twrp.img
Click to expand...
Click to collapse
Thanks! Yeah, apparently the ramdisk doesnt belong to this phone. I was able to install TWRP. I'm following the guides you provided as I type this. Let me go through these and I'll get back with you!
It works now! The problem I was having is that I tried installing the Magisk from TWRP as ZIP (which this time I couldnt find anywhere on the phone after copying it via graphical interface in android) so I just ran this command:
adb sideload Filepath\Magisk.zip
This installed Magisk on my home screen and I applied the patch from the app. I rebooted and voilá! it works now. It even had the previous configuration already applied, it recognized my face without even setting it up again.
As the phone was already rooted, Im not sure if this app really roots the phone as it didnt require a factory reset as other methods do, but the issue is now fixed!
Thank you for your support on this matter!
jeinnerabdel said:
It works now! The problem I was having is that I tried installing the Magisk from TWRP as ZIP (which this time I couldnt find anywhere on the phone after copying it via graphical interface in android) so I just ran this command:
adb sideload Filepath\Magisk.zip
This installed Magisk on my home screen and I applied the patch from the app. I rebooted and voilá! it works now. It even had the previous configuration already applied, it recognized my face without even setting it up again.
As the phone was already rooted, Im not sure if this app really roots the phone as it didnt require a factory reset as other methods do, but the issue is now fixed!
Thank you for your support on this matter!
Click to expand...
Click to collapse
It does not require a factory reset. That was only needed before when TWRP couldn't decrypt phone, and it can now thanks to zxz0o0 and Pretoriano80. Then you had to Format Data to flash as Magisk installs some things to /data (contrary to what I said earlier, but it does need to patch ramdisk to function ). SuperSU only places its apk in /data/ while the rest lives in ramdisk.
This is the Xiaomi Redmi K20 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
mauronofrio said:
This is the Xiaomi Redmi K20 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
Great to see this tool available for k20pro. Tweaking would be much easier now
Thank you so much for this aweeesooome project!
k20 pro
Can anyone tell me if the twrp works?
ArMaNi125 said:
Can anyone tell me if the twrp works?
Click to expand...
Click to collapse
Yes the twrp works
Has anyone successfully unlocked bootloader with this. Can it bypass the xiomi wait time
shharratth said:
Has anyone successfully unlocked bootloader with this. Can it bypass the xiomi wait time
Click to expand...
Click to collapse
You can't:crying:
Thanks
Thanks a lot, is this useful in case I brick my phone? "Soft brick" in case I installed wrong rom or bootloader?
I just got my K20 pro "Chiense" 256/8 I'm planning to try few roms, as the original one filled with bloatware and even after removing everything I don't trust the inside system codes not to have any ad push services or some data tracking service.
HELP plz!!
I flashed TWRP using this. then went to TWRP and in the program I choose (root only) and flashed magisk with the program. I rebooted my phone but it reboots to TWRP and not normal. I turned it off and back on ,but it still boots to TWRP.
help please. what to do? How do I restore it to normal (preferably without losing my data) ?
I can access fastboot and can access it with my computer.
zanin said:
I flashed TWRP using this. then went to TWRP and in the program I choose (root only) and flashed magisk with the program. I rebooted my phone but it reboots to TWRP and not normal. I turned it off and back on ,but it still boots to TWRP.
help please. what to do? How do I restore it to normal (preferably without losing my data) ?
I can access fastboot and can access it with my computer.
Click to expand...
Click to collapse
There ar the fastboot rom released directly from xiaomi
mauronofrio said:
There ar the fastboot rom released directly from xiaomi
Click to expand...
Click to collapse
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
zanin said:
can you be more specific? what exactly should I do?
Click to expand...
Click to collapse
nevermind .I solved it. thnx anyway
Could you please make it open source? I'd like to translate it to Chinese.
Suvern said:
Could you please make it open source? I'd like to translate it to Chinese.
Click to expand...
Click to collapse
I'm planning to make it opensource, but for now i can't
zanin said:
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
nevermind .I solved it. thnx anyway
Click to expand...
Click to collapse
What did you do to solve it? Ran into the same issue with boot looping back into twrp, haven't had a chance to try again or do some research into the exact cause.
zanin said:
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
nevermind .I solved it. thnx anyway
Click to expand...
Click to collapse
How did u solved it?
TyrX69 said:
How did u solved it?
Click to expand...
Click to collapse
Flash Chinese rom recovery official from xiaomi
Hello
i bought in uk a k20 pro with global rom installed and bootloader unlocked i think from the seller
With your tool can I install any rom and twrp without problems?
Thank you so much.
fabianocannizzo said:
Hello
i bought in uk a k20 pro with global rom installed and bootloader unlocked i think from the seller
With your tool can I install any rom and twrp without problems?
Thank you so much.
Click to expand...
Click to collapse
Yes
if i've understood well it doesn't work to install a working magisk tho? Looks like it send the phone to recovery loop
Can I unlock bootloader unofficially with this tool?