I have unlocked the bootloader after that I have installed the twrp and wanted to have the magisk too.
but unfortunately when flashed magisk zip phone got bricked and didnt boot into recovery just go into fastboot (btw the recovery i flashed was also temporary as it has been gone every time i restart and i have to again reflash the recovery) kindly help me how to unbrick my phone????? tried many method found online all in vain.
I was using realme ui 1.0.
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
donkeyman1234 said:
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
Click to expand...
Click to collapse
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
So you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
rename ozip to zip, see if twrp works? And can you show me your phone version?
donkeyman1234 said:
So you have global version then you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do, because I can't unlock the bootloader for my global version. Maybe you can show us how you unlock the global version steps by steps.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
rename ozip to zip, see if twrp works? And can you show me your phone version?
Click to expand...
Click to collapse
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Sajidmaibal said:
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Click to expand...
Click to collapse
unlocking bootlaoder is easy
1. you need in dept test app latest one
2. submit for review
3. review will get successful in 10/20 mins
4. then just follow the normal procedure for unlocking
kindly follow these vidoes for reference
https://youtu.be/dW4yKt6Xtss
https://youtu.be/V-4ArXEmySM
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
So you hard bricked you phone by locking bootloader.
Maybe you should take it to service center.
Flash twrp 3316 IMG..it will flash ozip
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
XDA seems pretty dead these days. Shame.
J-Mizzle said:
XDA seems pretty dead these days. Shame.
J-Mizzle said:
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
Click to expand...
Click to collapse
it happened to me too. i can help you. first boot into fastboot and use ur computer to flash twrp using command "fastboot flash recovery (attach twrp img here) then boot into recovery which should be twrp and then download orangefox recovery for realme xt. it should be a zip file so just install it using twrp. Then get the official realme xt ozip from their website boom orangefox should install it then wipe data once again.. then start your system. if it goes into recovery again just wipe data again and it should work.
Click to expand...
Click to collapse
any update here guys? bricked my phone on relocking bootloader.
Related
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
OK.. suppose now I unlocked the bootloader... wat should I do to flash twrp and root the phone.. should I just flash tarp and supersu or should I need to flash anything else... please help me step by step after unlocking bootloader...
follow lolipop unlock process Replace emmc_appsboot.mbn in dev rom and flash via mi flash done,
fastboot oem unlock-go
fastboot flash recovery recovery name.img
then flash radon latest marshmallow version and then flash supersu 2.76 done, its work for me,
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/redm...459382/page330
[email protected] said:
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B81...w?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://.xda-.com/redm...459382/page330
Click to expand...
Click to collapse
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
XN Logos said:
How we can flash twrp without unlocking bootloder as you sat, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
[email protected] said:
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
Click to expand...
Click to collapse
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Sorry I accidently removed the link.
I also deleted my review video of YouTube .
I will upload it and get you the link
---------- Post added at 11:08 AM ---------- Previous post was at 11:03 AM ----------
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Once unlocked bootloader and flash twrp.
You don't have to take help of PC or any other thing.
You can always do it on the phone itself.
Boot into twrp by pressing upper volume and power button.
Wipe everything except storages (internal or external)
And then install the ROM zip file and gapps file accordingly.
Do it for any rom
---------- Post added at 11:20 AM ---------- Previous post was at 11:08 AM ----------
Wait uploading the file...
---------- Post added at 11:26 AM ---------- Previous post was at 11:20 AM ----------
Bro file uploaded.
Take it and enjoy.
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
---------- Post added at 11:29 AM ---------- Previous post was at 11:26 AM ----------
XN Logos said:
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
New link updated for root files
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Sorptarn said:
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Click to expand...
Click to collapse
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
[email protected] said:
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
Click to expand...
Click to collapse
Thnx fr the update..........
Bt was asking that im currently on miui 8 stable lp........ Th unlock krne k lie miui dev rom th flash nhi krni......
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
[email protected] said:
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
Click to expand...
Click to collapse
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
abihary said:
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
Click to expand...
Click to collapse
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
$lim $hady said:
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
Click to expand...
Click to collapse
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
abihary said:
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
Click to expand...
Click to collapse
Thanks for the link. Downloading it now..could you please provide the steps to flash this file or a link which helps in flashing fastboot rom...
once i have flashed, just unlock it and flash twrp and supersu.
Any other steps to flash cm 13 or 14..??
$lim $hady said:
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
Click to expand...
Click to collapse
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
[email protected] said:
Yeah
Click to expand...
Click to collapse
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
[email protected] said:
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
Click to expand...
Click to collapse
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
$lim $hady said:
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
Click to expand...
Click to collapse
Wait for 1 or 2 weeks then.
And not sure whether it will accept your request or not. OK .
Welcome
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
Updated for more serious reference. Hope this info helps you!
Procedure:
Once you have updated to Nougat, you would have to unlock your bootloader
The APK that unlock the bootloader works (Even though is marked as M version). (Remember that this will wipe your device!) For ULBL -> Version UnlockTool_2017_0803(android M) (FROM ASUS) https://www.asus.com/us/Phone/ZenFone-3-Zoom-ZE553KL/HelpDesk_Download/
Zenfone will reboot and you will able to see a new splash screen that informs you that your device is unlocked giving you boot options Don't press anything. (You will see this everytime you reboot). The next screen will show an erase process. Phone will reboot.
Once booted enable developer options and adb via usb.
You can find TWRP builds right here: https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w (Special thanks to: @shakalaca) Use the latest one.
Go to fastboot mode and install TWRP. (fastboot flash recovery (nameoffile).img)
Let fastboot do it's magic, once you finish press volume buttons till you find reboot recovery press power button to select. It will boot again to the first splash. Do not press anything, let it work. It will boot TWRP in a whistle.
Once in TWRP make a backup. You know it's necessary, and will save your ass in case of a softbrick.
Flash latest magisk (Current Ver: 13.3) Magisk thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Reboot, check drawer for magisk manager, magisk and root should be enabled.
Voila. Safetynet test passed :good:
what version was twrp are you using and what steps did you take to get magisk to work.
smariob said:
So today finally I got my Asus Zenfone 3 Zoom. I couldn't contain myself to start playing with it.
My very first surprise was that the phone requested for an update. I've done it. I ended with a stock 7.1.1 AZ3Z.
This is my experience:
The APK that let you unlock bootloader works. (Remember that this will wipe your device)
After auto reboot I cheched safetynet. At this point test failed (Little bit obvious)
I was able to go to fastboot mode and install TWRP (The same you can find right here at the forum)
Let fastboot do it's magic, press volume buttons till you find reboot recovery. It will boot TWRP in a whistle.
Once in TWRP I made a backup. You know if necessary.
The next step was a crossfinger procedure. Just flashed latest magisk Beta (13)
Reboted checked for magisk manager on drawer.
It was there and root also. Enabled magiskhide, and voila. Safetynet test passed :good:
Hope this Info help you.
Click to expand...
Click to collapse
Do you know if this works with Android Pay?
magicmanfk said:
Do you know if this works with Android Pay?
Click to expand...
Click to collapse
It should work with it, im able to login intoy bank account with no problem with this method, I will give it a try for you though.
mr573162 said:
what version was twrp are you using and what steps did you take to get magisk to work.
Click to expand...
Click to collapse
magicmanfk said:
Do you know if this works with Android Pay?
Click to expand...
Click to collapse
It's twrp 3.1.0
It should work as it passes CTS profile and Basic Integrity I can't test it myself because I live in Mexico and Android Pay is not avialable here yet.
Will edit OP
Just a question as I'm having difficulty booting into TWRP.
My device is unlocked and when flashing TWRP using the command "fastboot flash recovery twrp.img" and trying to boot into it nothing happens other than my device going into the bootloader. I have tried flashing both the most recent TWRP 3.1.1 and 3.1.0 yet I keep on coming to the same problem. Can anyone provide help? thanks in advance.
GarGarStinks said:
Just a question as I'm having difficulty booting into TWRP.
My device is unlocked and when flashing TWRP using the command "fastboot flash recovery twrp.img" and trying to boot into it nothing happens other than my device going into the bootloader. I have tried flashing both the most recent TWRP 3.1.1 and 3.1.0 yet I keep on coming to the same problem. Can anyone provide help? thanks in advance.
Click to expand...
Click to collapse
Everytime you reboot the pone starts into boot loader. It has a countdown to boot into whatever is commanded.
Once you flashed succesfully the recovery img you just have to select option to boot recovery with vol keys and power.
Phone will reboot into bootloader agin let it boot on contdown (don't press any key)
Then it will boot into twrp.
Hello, on nougat i am trying to install the twrp, I downloaded the official bootloader release program (after installing the message "unlocked device") but trying to install the twrp via fastboot me by an error message. ... but I think the problem is the unlocking of the bootloader (if I turn the ze553kl in fastboot mode I see my device is "locked") ... there is another version of the bootloader release software? The one available on asus site would look for android M ... maybe there is one for Nougat? Thanxs
Wop. I used the M version apk on Nougat. It worked with no issues, the unlock of boot loader is successful when all the content of your smartphone is wiped.
For reference: https://www.youtube.com/watch?v=hg77b8o8Jk4 Min 1:29
Thank you! But running the software, does not run any wipe, it only displays an "unlocked" message without having to restart anything else. I also tried to make a "factory reset" and repeat lab process but the result does not change ...
TWRP tip!!
smariob said:
Go to fastboot mode and install TWRP. You can find TWRP and how to install it right here: https://forum.xda-developers.com/zenfone-3-zoom/how-to/twrp-zenfone-3-zoom-t3624551
:
Click to expand...
Click to collapse
If you follow that link and flash the recommended version, TWRP might load upside down and mirrored, impossible to use. I flashed the latest version from the MEGA link (3.1.1) and it was back to normal. Just a head's up for future reference, you might want to update your post.
---------- Post added at 09:39 PM ---------- Previous post was at 09:32 PM ----------
smariob said:
Go to fastboot mode and install TWRP. You can find TWRP and how to install it right here: https://forum.xda-developers.com/zenfone-3-zoom/how-to/twrp-zenfone-3-zoom-t3624551
:
Click to expand...
Click to collapse
If you follow that link and flash the recommended version, TWRP might load upside down and mirrored, impossible to use. I flashed the latest version from the MEGA link (3.1.1) and it was back to normal. Just a head's up for future reference, you might want to update your post.
Updated, never had mirror issues but is always better to have latest recovery.
Edit. Jimbo, I got an anwer from the source it notes: "please use 'fastboot flash recovery' instead of 'fastboot boot' to avoid up side down screen"
I've also tried installing from scratch with Asus flash tool, but I still can not unlock bootloader ... Anyone know if there is also an unofficial method for unlocking the bootloader?
@bizzino what model of Z3Z are you using?
Maybe Unlock bootloader app is intended for specific models... Let me do a little bit of research
Double posted... (Don't know for what reason this is happenning)
smariob said:
@bizzino what model of Z3Z are you using?
Maybe Unlock bootloader app is intended for specific models... Let me do a little bit of research
Click to expand...
Click to collapse
Ze553kl. WW_Z01H
bizzino said:
Ze553kl. WW_Z01H
Click to expand...
Click to collapse
Couldn't find another unlock tool than 2017_0803 ...
What info gives you fastboot mode?
smariob said:
Couldn't find another unlock tool than 2017_0803 ...
What info gives you fastboot mode?
Click to expand...
Click to collapse
Locked
Works just fine, thank you
But how would I go about setting the phone back to stock if needed in the future? (Removing Magisk, and replacing TWRP with the original recovery software).
@bizzino No news for you i wasn't able to find more info I'm sorry. Maybe change it for warranty? @subsector you should flash original recovery via fastboot and then sideload the stock rom
I have been searching in the internet for hours, trying every method i could understand and none of them worked. the main problem is the official bootloader unlock tool provided by asus is not working, it just restarts the phone and it is still locked. one solution is flash a custom recovery without unlocking phone and another way is unlock without the official app or maybe root without custom recovery, i would be happy if someone explains a way to root this phone.
indeed. the official bootloader unlock is not working and just restarting with no changes.
Then i tried to flash TWRP via fastboot it says Ok but no TWRP when I proceed to recovery its only stock recovery.
iamcurseal said:
indeed. the official bootloader unlock is not working and just restarting with no changes.
Then i tried to flash TWRP via fastboot it says Ok but no TWRP when I proceed to recovery its only stock recovery.
Click to expand...
Click to collapse
iamcurseal said:
indeed. the official bootloader unlock is not working and just restarting with no changes. Then i tried to flash TWRP via fastboot it says Ok but no TWRP when I proceed to recovery its only stock recovery.
Click to expand...
Click to collapse
I've managed to root my phone using magisk and looks like my phone is unlocked and unlock tool had no problem because i could flash modified boot.img and install magisk. Also i can't install asus updates anymore.
lostact said:
I've managed to root my phone using magisk and looks like my phone is unlocked and unlock tool had no problem because i could flash modified boot.img and install magisk. Also i can't install asus updates anymore.
Click to expand...
Click to collapse
did you flashed the magisk?
sorry Im only newbie in flashing, can you give me the procedure how to use magisk? if possible, also the rooting procedure.
The consequences like cant update the version is no problem for me.
thanks for the help. :good:
You can try this twrp http://www.stupdroid.com/2018/02/root-twrp-Asus-ZB501KL.html
lostact said:
I've managed to root my phone using magisk and looks like my phone is unlocked and unlock tool had no problem because i could flash modified boot.img and install magisk. Also i can't install asus updates anymore.
Click to expand...
Click to collapse
can you provide a guide on how to do this. A link to a boot.img would be greatly appreciated!
lostact said:
I've managed to root my phone using magisk and looks like my phone is unlocked and unlock tool had no problem because i could flash modified boot.img and install magisk. Also i can't install asus updates anymore.
Click to expand...
Click to collapse
I don't really need to root it, and instead of creating new thread I'd ask here;
The L1 is my wife's phone now, it's unroot, and never need to be,...can somebody tell me the guide of how to get rid the bloatwares on it? With adb on pc perhaps?
Thank you in advance.
Pasarireng said:
I don't really need to root it, and instead of creating new thread I'd ask here;
The L1 is my wife's phone now, it's unroot, and never need to be,...can somebody tell me the guide of how to get rid the bloatwares on it? With adb on pc perhaps?
Thank you in advance.
Click to expand...
Click to collapse
Somebody please?
Help!
can you provide a guide?
lostact said:
I have been searching in the internet for hours, trying every method i could understand and none of them worked. the main problem is the official bootloader unlock tool provided by asus is not working, it just restarts the phone and it is still locked. one solution is flash a custom recovery without unlocking phone and another way is unlock without the official app or maybe root without custom recovery, i would be happy if someone explains a way to root this phone.
Click to expand...
Click to collapse
I suppose that you've already turned developer mode on and enabled the USB debugging.
Did you either reboot the phone by yourself or it did that automatically after flashing twrp? There are some devices that just restart and get the official bootloader back. This auto restart overwrites the bootloader.
Some people say that after flashing twrp you must unplug the device and then reboot directly to bootloader by yourself, holding the power and volume up buttons . Have you tried it?
---------- Post added at 06:16 PM ---------- Previous post was at 06:14 PM ----------
mark332 said:
You can try this twrp http://www.stupdroid.com/2018/02/root-twrp-Asus-ZB501KL.html
Click to expand...
Click to collapse
Thank you guy! But today it returns 404.
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'