I'm not sure if I'm just having issues with the case, but my whitestone dome glass keeps lifting on the corners. Does anyone have this screen protector and a good compatible case?
Been considering the whitestone dome screen protector or the upcoming rhinoshield plastic one, mind if I ask what case you're using that is causing it to lift?
Waiting official LED samsung cover to test with... hope it will fit
getting some tg lifting issue when using the unicorn bettle pro.
rhinoshield solidsuit works just fine with wsd
Sent from my LG-H930 using Tapatalk
I'm using Dome Glass with no issue with the dbrand. I can also tell you the UAG and Spingen Tough Armor also work fine with Domeglass.
I like the "tear down" skin you can get with the case. dbrand is not cheap. I think I paid 44 for the case and the skin. They have a nice micro fiber interior to protect the glass back.
Just for anyone wondering, the protector that I was using that caused lifting was the Spigen clear ultra hybrid. After about a day, the corners lifted, and any button presses cause screen lifting. We swapped it for a spigen liquid crystal and so far it's not as bad.
I'm using the Otterbox defender with no issues
Sent from my SM-G988B using Tapatalk
i have the official clear view cover for my s20 +, works fine with the dome glass
One vote here for Spiegen Tough Armor
I love this case, cause it's tough. Like armor.
No lifting of the whitestone dome glass (well, my first placement did result in lifting but i messed up , had it too far toward the bottom. 2nd try was perfect).
I also didn't have a problem with the Samsung LED cover or the Samsung flip-open cover with the clear section running down the right
And, I'd just like to add, that the fingerprint detection is SOOO much better than my prior Galaxy note 10+. Thank you thank you thank you Samsung.
I love this S20+. (I had an Ultra but turned it in cause it was just a little too big. This one fits my mitts well).
Cheers XDA! Keep up the great site!!!
Samsung Led Cover [emoji846]
Spigen Slim Armor
Just got the Spigen Slim Armor case. It fits perfectly and feels great on the hand. There is no problem with the Whitestone dome glass that I installed a few days ago.
I had similar issue with my S10+ so this time I went screen protector free. With Assurion, if I break my screen is $30 the screen replaced, they even come to my house to do it so to me, it was a no brainier
San Diego said:
I love this S20+. (I had an Ultra but turned it in cause it was just a little too big. This one fits my mitts well).
Cheers XDA! Keep up the great site!!!
Click to expand...
Click to collapse
+1 with this comment.
Sent from my SM-G986U1 using Tapatalk
Anyone using Whitestone with Spigen Liquid Air?
Still following this and hoping there's more feedback. Just installed Dome on mine and my wife's and I'm not sure any cases we have will work without pulling up the glass. The test begins tomorrow!
Case test 1 and 2 - Scnail Titan works well. No issues. Schnail Savior lifted the very top lip of the glass on my wife's.
Samsung silicone case (for regular s20) also fits well.
https://www.amazon.com/CYRILL-Color-Designed-Samsung-Galaxy/dp/B0832B3DH1
This is Spigen's alt-brand. I have it in green and blue, definitely my favorite cases out right now. Works perfectly with the Whitestone glass.
UAG Monarch fits perfectly. My favorite case this far. Wife just got a Snakehive leather case that is awesome too and works well with the Dome.
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
[/COLOR]
Digibeginner said:
Just got the Spigen Slim Armor case. It fits perfectly and feels great on the hand. There is no problem with the Whitestone dome glass that I installed a few days ago.
Click to expand...
Click to collapse
I have the slim armor case. Is it still working well with the Whitestone glass? Trying to be sure before I make the investment.
Related
I recently got my note 3 and need to protect it properly. I got the iloom flexible glass screen protector and have been looking at a few options for a case:
- samsung original flip wallet (expensive!)
- spinge neo hybrid case - which i think i prefer for being sober, slim and seems sturdy
- Feel free to suggest a nice quality case - slim, non obtrusive.
But i have a doubt if the spinge case wont damage the screen protector on the edges. Saw a review of the neo hybrid (i think its the one on the spinge website) and the reviewer's note3 had that screen protector problem, a little damage on the edges because of the case - it lifts the screen protector a bit.
Do any of you have any problems like these with the neo hybrid? I assume it all depends on the screen cover, on how much surface it covers and if it gets tucked below the cover.
Anyway, please feel free to give me your feedback and opinions. They are very welcome.
Thanks
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
mikemq2003 said:
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
Click to expand...
Click to collapse
Seems very nice also. I somehow missed it when i was browsing the cases. And do you have a screen protector? Does the case mess with the screen protector?
I do. I have a tempered glass protector with the spigen bounce. No problems with it. It won't mess with film protectors either. This is the case with my protector. Page 64 closer towards the bottom of page.
http://forum.xda-developers.com/showthread.php?t=2441894
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
manifesto42 said:
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
Click to expand...
Click to collapse
Awesome! Enjoy your case. You will love it.
Otterbox defender, punched out the plastic screen protector and installed a mime feather tempered glass screen protector. Doesn't get any better... In my opinion.
Sent from my NOT3
http://www.amazon.com/Caseology-Sam...d=1386577863&sr=8-1&keywords=caseology+note+3
i have the iloome flex screen protector as well with the case above. Fits PERFECTLY! looks good too.
Has anyone had better luck than I at finding a case and screen protector, preferably one with a matte finish, that work well together on the S7 (non-edge)? I generally use Spigen cases as they are slim and slightly wrap around the front of the phone. However, this caused my first two screen protectors (both plastic) to bubble up around the edges and eventually peel off. The best was the Skinomi but it only lasted a few weeks longer than the first one I tried.
From reviewing most threads it looks like most people have either went the route of either a) skin + screen protectors or b) case + no screen protectors on their S7 due to slightly curved nature of the screen. But being as it's now September, I was hoping there would have been some better options to fully protect the phone. I'm hoping to hear if anyone has found a good combo.
Thanks in advance.
-J
Has anyone found any matte screen protector that works with ANY s7 case?
No luck? I just put a Spigen Neo-Hybrid and immediately the BSE cover bubbled up.
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Sent from my SM-G930F using Tapatalk
iridaki said:
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Click to expand...
Click to collapse
I use the tech 21 matte impact shield with a tech 21 impact tactical case. Really nice combo that work well together, but far from cheap!
I use goospery with screen protector and no problems
iridaki said:
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Wow $35! Not something to just try out.
robotapocalypse said:
Wow $35! Not something to just try out.
Click to expand...
Click to collapse
I paid £16 for mine here in the UK off ebay. They are very pricey but I am very happy with it. The anti glare makes such a huge difference. Equally it does feel like it will last.
The tactical case I got seems very rare to source here in the UK as well from anywhere other than tech 21. Ended up paying £30 for that!
In the kitchen bro
My mother and I have had the S8 since release. We have never had an issue with breaking the screens until this phone! The Zagg one on release day absolutely stunk as the adhesive was only on the curved part of the protector leaving the whole screen non responsive to our touch. Since then we have been daring and been going without one. Within the last 3 months my mother dropped her phone twice. The phone was replaced at a $149 deductible the first time. I refuse to pay it again until I can find a screen protector that works!
Please help!
Full adhesive, curved edges, perfect glass cover.. Can be purchased from Home Depot or Amazon!
Samsung Glass Screen Protector - Ultra Thin Tempered Glass with Easy Applicator and Cleaning Kit - Smudge, Fingerprint, Scratch and Shatter Resistant - ProGlass by Tzumi
Doesn't make since to make another thread, but I'm looking for something that's similar. Preferably one that is case friendly, doesn't ruin touch sensitivity, and doesn't have a weird cutout for the sensors at the top. I bought the Pro Glass one in the above post, but it wasn't case friendly.
[email protected] said:
Full adhesive, curved edges, perfect glass cover.. Can be purchased from Home Depot or Amazon!
Click to expand...
Click to collapse
Links?
As far as I know, having tempered glass only won't help when the phone drops.
For myself, I watched several people try drop testing S8 using rhino shield bumper case (can search on YouTube). I too, have one, but since I don't like the glass back getting smeared with fingerprint, I go to otterbox defender (a hefty one), and finally to spigen tough armor (the one I currently use).
For record, I have dropped my phone twice (forgot whether using defender or rhinoshield), without any tempered glass, and the phone is still working without flaw.
GOBUKEE GALAXY S8 Full Glue Tempered Glass
This looks promising GOBUKEE GALAXY S8 Full Glue Tempered Glass
Thanks!
$30 for a screen protector does not look promising!
thevmax said:
$30 for a screen protector does not look promising!
Click to expand...
Click to collapse
Neither is wasting money on cheaper versions that just don't work. If this one actually prevents screen damage without compromising the user experience then it's a good investment.
I bought these.. pretty good in my opinion, for the price
Karlinski said:
I bought these.. pretty good in my opinion, for the price
Click to expand...
Click to collapse
What case are you using with your GOBUKEE?
https://www.amazon.com/gp/aw/d/B074SJV133/ref=ya_aw_od_pi?ie=UTF8&psc=1
I got these. There is about ~1mm gap between top and bottom edges clearance with spigen tough armor on. The sides of the glass are almost right on the edges of the case. I don't recommend using it without a case or with rhino bumper bc it doesn't go to the edges and feels weird bc of the extra gap. It does come with a tool that clips onto the phone to line it up perfect. I'm happy with it.
I'm using a Spigen case. I do have an S8 active, so the case is different, but Spigen makes great stuff
Incipio Plex Plus Shield Edge is awesome, had mine for a couple months and it's still attached lol
I purchased these: https://www.amazon.com/gp/aw/d/B078W2LZM6?psc=1&ref=yo_pop_mb_pd
It may be a PET protector but it does the job and is super thin and case friendly. Another aspect is that it's cheap! 3 for 8 bucks and was easy to install.
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Knox316 said:
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Click to expand...
Click to collapse
Whitestone dome...have it on my s8 with that spigen
Sent from my SM-G950F using Tapatalk
The best glass for S8 is Gobukee full adhesive glass. Can be found on Amazon. Quite a new brand but the product is awesome..I am enjoying it.
Knox316 said:
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Click to expand...
Click to collapse
Spigen offers a tempered curved protector that fits. Mine cracked after 2 months, still usable. Experienced a few spots in the corners where touch responsiveness is decreased.
What is the best Glass Screen Protector for Galaxy S8
I've always admired how my friend’s phone looked so seamless and smooth, it always fooled me thinking that his screen protector came with the phone when he purchased it. To my surprise, he installed it himself. Now I’m not a bad friend, but this guy can get excruciatingly stupid at times. I thought if someone as dense as him had managed to somehow not mess up with wet installation, how hard can it be?
I got the Ounier screen protectors, a squeegee, a tiny piece of cloth, a manual, and a small bottle spray solution. I’m the old-fashioned type, I never even knew that “wet installation” is actually a thing if not for my buddy. All these items looked so weird to me. I’ll never understand how people come up with this stuff but if it works, then it's fine with me.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs
Just wanted to share my experience here. I bought a SUPCASE Unicorn Beetle PRO for my 6t and hated the built in screen protector. So I ordered a tempered glass one ( https://www.amazon.com/gp/product/B07KCTJLF2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ) got it installed and the air bubbles worked out. Then cut the screen protector out of the bezel in the Supcase. Some people said you could peel them right out but mine wasnt having any of that. I spent 20 mins making sure it was trimed flush with the bezel then snapped it all together and it promptly popped the screen protector up. I trimmed the bezel some and it kept doing it.
I am going to try to drastically file the bezel and see if it will work but not much hope. So will need a new case I guess.
rahlquist said:
Just wanted to share my experience here. I bought a SUPCASE Unicorn Beetle PRO for my 6t and hated the built in screen protector. So I ordered a tempered glass one ( https://www.amazon.com/gp/product/B07KCTJLF2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ) got it installed and the air bubbles worked out. Then cut the screen protector out of the bezel in the Supcase. Some people said you could peel them right out but mine wasnt having any of that. I spent 20 mins making sure it was trimed flush with the bezel then snapped it all together and it promptly popped the screen protector up. I trimmed the bezel some and it kept doing it.
I am going to try to drastically file the bezel and see if it will work but not much hope. So will need a new case I guess.
Click to expand...
Click to collapse
I'm using the Spigen liquid air case with that same screen protector and it fits absolutely perfect. No issues and it works great.
Sent from my ONEPLUS A6013 using Tapatalk
---------- Post added at 01:59 AM ---------- Previous post was at 01:57 AM ----------
Also, I used a small tip soldering iron to stipple the sides of the case to create a little more grip for my taste. Turned out great and gave it that little bit of extra grip I think a lot of these case really need.
Sent from my ONEPLUS A6013 using Tapatalk
I just installed this on my wifes OP6T. I used a blow dryer for about 5 minutes and the crappy glass cover came right out. Installed a tempered glass protector in its place and her case came together all nice. My wife has gone through 5 tempered glass protectors in the last 3 months. I actually quite like the heft and security of this case, I may bite the bullet and replace my Spigen Liquid.
https://www.amazon.com/SUPCASE-Prot...icorn+pro&qid=1573657763&s=electronics&sr=1-2
I have no idea what you did but I used these products without any issues. I had to do nothing with Omoton screen protector just put it on using the frame they sent in the box, it is smaller than the screen or the bezel of the case.
I am currently using this supcase and oneplus tempered glass screen protector, they fit as they were desined to work together.
Sorry bro, I think you did something wrong.