Hi I have the Russian version of this device
I install the c02 update and few days ago the c03 update
But today is the android 10 update for the global version out
I download and try to install but
Installation faild
How can I install it without unlock bootloader and twrp
I can't unlock the dept apk don't work on my device
The c03 update is very buggy! C02 was buggy too but not so bad like the c03
Hope some one can help me out
Thanks!
Where are you finding the update for the global version?
Duzzixxx said:
Hi I have the Russian version of this device
I install the c02 update and few days ago the c03 update
But today is the android 10 update for the global version out
I download and try to install but
Installation faild
How can I install it without unlock bootloader and twrp
I can't unlock the dept apk don't work on my device
The c03 update is very buggy! C02 was buggy too but not so bad like the c03
Hope some one can help me out
Thanks!
Click to expand...
Click to collapse
Global version? where?
tarekboukaf said:
Global version? where?
Click to expand...
Click to collapse
OTA - try to use a Russian VPN. It works for me
00norman00 said:
OTA - try to use a Russian VPN. It works for me
Click to expand...
Click to collapse
The thing is you can't downgrade from India c03 to c01. OPPO phones do not offer flash tool like Samsung Odin. However, you can download global realme ui c01 firmware and turn the phone to recovery mode to flash back to global version.
00norman00 said:
OTA - try to use a Russian VPN. It works for me
Click to expand...
Click to collapse
Agree. Russian VPN shows OTA Update. After start of Download you can disconnect from VPN. There are free Russian VPN Tools in Play Store.
00norman00 said:
OTA - try to use a Russian VPN. It works for me
Click to expand...
Click to collapse
Can I install this on my global device on which I have wrongfully installed the Indian realme ui? It is buggy right now. Thanks in advance for the help. ?
Can u check the update status?
I install indi c03 and I doesn't check
The phone get back after few sec
Duzzixxx said:
Hi I have the Russian version of this device
I install the c02 update and few days ago the c03 update
But today is the android 10 update for the global version out
I download and try to install but
Installation faild
How can I install it without unlock bootloader and twrp
I can't unlock the dept apk don't work on my device
The c03 update is very buggy! C02 was buggy too but not so bad like the c03
Hope some one can help me out
Thanks!
Click to expand...
Click to collapse
try this post
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
Guys, for all those who had an issue installing the Indian RUI version on top of global model and all the bugs of battery drain, automatic brightness, NFC not working, no update setting etc, check this thread down below for the solution. I can confirm it worked for me as well. Proceed at your own discretion and if this works, please reply to the comment to thank the guys that made this possible. @LucaLKS and @donkeyman1234 you are amazing! Thank you so much :good::good::good:
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
mario0788 said:
Guys, for all those who had an issue installing the Indian RUI version on top of global model and all the bugs of battery drain, automatic brightness, NFC not working, no update setting etc, check this thread down below for the solution. I can confirm it worked for me as well. Proceed at your own discretion and if this works, please reply to the comment to thank the guys that made this possible. @LucaLKS and @donkeyman1234 you are amazing! Thank you so much :good::good::good:
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
Click to expand...
Click to collapse
I am glad it works for you, I think others can follow too.
I updated yesterday and it work well
No more problems
Now I don't need to send my phone to realme repair service
Duzzixxx said:
I updated yesterday and it work well
No more problems
Now I don't need to send my phone to realme repair service
Click to expand...
Click to collapse
Fantastic. It seems to work for everyone
Duzzixxx said:
I updated yesterday and it work well
No more problems
Now I don't need to send my phone to realme repair service
Click to expand...
Click to collapse
Well done my friend!! Enjoy your phone
Thanks guys
Only one problem left guys!
The standard music player makes noise like incoming msg sound when I klick next track or make something in the music application why is that so?
I use normally power amp but sometimes starts this standard player and not power amp
How can I change the standard player an maker power amp default as player? Or get this sound go away.. Aber every Aktion makes this stupid sound
Have any one this issue?
Related
10.3.2.0
https://sourceforge.net/projects/xi...MIPAD4_V10.3.2.0.ODJCNXM_v10-8.1.zip/download
https://androidfilehost.com/?fid=6006931924117902349
10.2.1.0
https://sourceforge.net/projects/xi...MIPAD4_V10.2.1.0.ODJCNXM_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603900587
10.1.1.0
https://sourceforge.net/projects/xi...MIPAD4_V10.1.1.0.ODJCNFI_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603843187
New links will be posted here.
thanks for the info! currently running the stable ROM with just a few issues.
inscythe said:
thanks for the info! currently running the stable ROM with just a few issues.
Click to expand...
Click to collapse
What are the issues?
I just ordered Mi Pad 4 from geekbuying https://www.geekbuying.com/item/Xiaomi-Mi-Pad-4-WiFi-Tablet-PC-3GB-32GB-Black-399472.html
and it's says that it have english room with play store so my guess is that they have installed xiaomi.eu rom.
lozohcum said:
What are the issues?
I just ordered Mi Pad 4 from geekbuying https://www.geekbuying.com/item/Xiaomi-Mi-Pad-4-WiFi-Tablet-PC-3GB-32GB-Black-399472.html
and it's says that it have english room with play store so my guess is that they have installed xiaomi.eu rom.
Click to expand...
Click to collapse
Might be a shop room. Got one from AliExpress and was unlocked so loaded xiaomi.eu on myself. If it says MIUI Global in the about section. Don't do anything until you have flashed China stable or xiaomi.eu
lozohcum said:
What are the issues?
I just ordered Mi Pad 4 from geekbuying https://www.geekbuying.com/item/Xiaomi-Mi-Pad-4-WiFi-Tablet-PC-3GB-32GB-Black-399472.html
and it's says that it have english room with play store so my guess is that they have installed xiaomi.eu rom.
Click to expand...
Click to collapse
There are some text issues with the xiaomi.eu tools (their built-in tweaking tools), which doesn't affect functionality.
Then, there is the widely-reported issues of the Power app crashing whenever you're installing an app. You can read similar reports at xiaomi.eu forum.
10.2.1.0 stable released recently
https://sourceforge.net/projects/xi...MIPAD4_V10.2.1.0.ODJCNXM_v10-8.1.zip/download
10.2.1.0 added in OP.
Camerado said:
10.2.1.0 added in OP.
Click to expand...
Click to collapse
I am a total newbie at this. How do I install this Rom, please? Is it very technical or straightforward?
Thanks
Hi installed the latest January release, and it seems like double tap to wake and raise to wake is missing?
I'm sorry but this is a multi-languages ROM, isn't it?
As I saw its name has a "CN" inside: "xiaomi.eu_multi_MIPAD4_V10.2.1.0.ODJCNXM_v10-8.1
I wonder if I flash this ROM, it will be back stock ROM with China apps, no Google Play and only Chinese and English languages
Please help to answer!
Thank you so much!
Hello. I decided to use eu-rom since magnetic cover does not work on the other custom rom.
On the rom I encountered that system partition does not allow "write", but read-only even I rooted with magisk and I use ES explorer or root explorer to modify the system file.
The purpose of changing system file is I like to use my favorite font on the device.
Is there any solution and why it does not allow the change?
When I install a custom rom like hovoc, permission is granted and I can change the font, but magnetic cover does not work....
I appreciate your advice to solve the problem.
Nova.vn said:
I'm sorry but this is a multi-languages ROM, isn't it?
As I saw its name has a "CN" inside: "xiaomi.eu_multi_MIPAD4_V10.2.1.0.ODJCNXM_v10-8.1
I wonder if I flash this ROM, it will be back stock ROM with China apps, no Google Play and only Chinese and English languages
Please help to answer!
Thank you so much!
Click to expand...
Click to collapse
Multi.
Camerado said:
Multi.
Click to expand...
Click to collapse
Thank you @Camerado. Please help a little bit more about my second part: this ROM will cut China apps and Google Play available, right?
Nova.vn said:
Thank you @Camerado. Please help a little bit more about my second part: this ROM will cut China apps and Google Play available, right?
Click to expand...
Click to collapse
Yep, you're right.
new one
10.3.1.0 added in OP.
Mi Pad 4 Plus
Camerado said:
10.3.1.0 added in OP.
Click to expand...
Click to collapse
This ROM works on Mi Pad 4 Plus?
Farejador said:
This ROM works on Mi Pad 4 Plus?
Click to expand...
Click to collapse
Yep.
10.3.1.0 rom can't download app in playstore always waiting network. Especially if connected to mobile hotspot. Maybe the problem from downloadProvider ?
10.3.1 installed, but no root anymore.
Magisk 19.1 install is failing from the Magisk manager app :
"unpacking boot image
unsupported/unknown image format
installation failed"
How to get root access with this ROM version ?
Edit : it worked when installing from TWRP
I'm so excited to have our MIUI 11 to our device, giving me a time to check for available update, but somehow I didn't find a source for the incoming update until I found it. I will share it with you guys the link where you can find both MIUI 11 update beta and MIUI 10 stable for EU version.
MIUI 11 Weekly beta EU
link
MIUI 10 Stable link
MIUI All Region link
Can I flash MIUI 11 beta over MIUI 10 EU stable?
Adairo said:
Can I flash MIUI 11 beta over MIUI 10 EU stable?
Click to expand...
Click to collapse
maybe not, this may lead you to bootloop if you do.
This isn't the proper place to post such info, please remove this and use the correct section.
Adairo said:
Can I flash MIUI 11 beta over MIUI 10 EU stable?
Click to expand...
Click to collapse
You can, but make a backup
Support 75hz refresh rate mode?
Alvaro1982 said:
Support 75hz refresh rate mode?
Click to expand...
Click to collapse
No.
Dev Dezigns said:
This isn't the proper place to post such info, please remove this and use the correct section.
Click to expand...
Click to collapse
Thanks for your concern! I changed the link directly to the download page. :good:
Will installing this allow me to update future MIUI updates OTA or would I have to reflash every time?
willineedhelp said:
Will installing this allow me to update future MIUI updates OTA or would I have to reflash every time?
Click to expand...
Click to collapse
Correct me if I'm wrong i think the moment you unlock your bootloader, there is no update will automatically notify or download on your device. every time there is an update you need to flash it manually.
flamedrops said:
Correct me if I'm wrong i think the moment you unlock your bootloader, there is no update will automatically notify or download on your device. every time there is an update you need to flash it manually.
Click to expand...
Click to collapse
Bummer. Oh well, thanks
willineedhelp said:
Bummer. Oh well, thanks
Click to expand...
Click to collapse
Yes, but the good thing is you will be able to select ROM you want.
willineedhelp said:
Will installing this allow me to update future MIUI updates OTA or would I have to reflash every time?
Click to expand...
Click to collapse
Hey i have a goodnews! i received an update today directly on my phone and after downloading it, click the install and will reboot to recovery then automatically installing via twrp on my device. i have no screenshot on twrp. btw im using twrp chinese version.
After updating via OTA for this update. my phone UI is restarting
flamedrops said:
Hey i have a goodnews! i received an update today directly on my phone and after downloading it, click the install and will reboot to recovery then automatically installing via twrp on my device. i have no screenshot on twrp. btw im using twrp chinese version.
Click to expand...
Click to collapse
After updating via OTA for this update. my phone UI is restarting.
manjunathsdm said:
After updating via OTA for this update. my phone UI is restarting.
Click to expand...
Click to collapse
what twrp version are you using?
Adaptive brightness Android 10
flamedrops said:
I'm so excited to have our MIUI 11 to our device, giving me a time to check for available update, but somehow I didn't find a source for the incoming update until I found it. I will share it with you guys the link where you can find both MIUI 11 update beta and MIUI 10 stable for EU version.
MIUI 11 Weekly beta
9.9.26 v2 link
9.9.27 soon
MIUI 10 Stable link
MIUI All Region link
Click to expand...
Click to collapse
What about adaptive brightness? Does it fix on stable android 10 version?When rapidly in dark room brightness agresive going to low an never back to adaptive?
tireks said:
What about adaptive brightness? Does it fix on stable android 10 version?When rapidly in dark room brightness agresive going to low an never back to adaptive?
Click to expand...
Click to collapse
I didn't tried the latest MIUI 10 because I Jump in to MIUI 11.
flamedrops said:
I didn't tried the latest MIUI 10 because I Jump in to MIUI 11.
Click to expand...
Click to collapse
Ok thanks, but does it fix that strange thing about adaptive brigtness on MIUI 10 was terrible. Please ask you!
tireks said:
Ok thanks, but does it fix that strange thing about adaptive brigtness on MIUI 10 was terrible. Please ask you!
Click to expand...
Click to collapse
It's significantly better. Haven't really noticed it at all, and that's how it should be.
---------- Post added at 05:42 PM ---------- Previous post was at 05:39 PM ----------
flamedrops said:
Hey i have a goodnews! i received an update today directly on my phone and after downloading it, click the install and will reboot to recovery then automatically installing via twrp on my device. i have no screenshot on twrp. btw im using twrp chinese version.
Click to expand...
Click to collapse
So I got an updater notification, and it allowed me to download the newest one. When it went to install it came up with the Chinese TWRP, but I have the English skin of the Russian one. I don't read/speak mandarin so I didn't want to risk swiping, but I thought it was super interesting.
willineedhelp said:
It's significantly better. Haven't really noticed it at all, and that's how it should be.
---------- Post added at 05:42 PM ---------- Previous post was at 05:39 PM ----------
So I got an updater notification, and it allowed me to download the newest one. When it went to install it came up with the Chinese TWRP, but I have the English skin of the Russian one. I don't read/speak mandarin so I didn't want to risk swiping, but I thought it was super interesting.
Click to expand...
Click to collapse
there is an option there to choose language including english one. but if the Russian is compatible then there is no need to change that.
Hello, today I appeared the update 10.3.3.0 for my Xiaomi MI 9T Pro Global version. Only bring the October security patch and even with MIUI 10.
Apparently MIUI 11 will not yet be available in the Global version of MI 9T Pro, as I expect to receive MIUI 11 and not MIUI 10 yet TODAY
MIUI Global 10.3.3 / Stable 10.3.3.0 (PFKMIXM)
same here
Relax guys, it's more important to have a recent security update instead of a half baked Q update...we'll receive it soon enough..
Updating with Orange Fox and Magisk
Hey guys. I've got this update showing up as well.
Is there any way to run this update while having Orange Fox recovery and Magisk installed?
I understand that Orange Fox allows this but when I tried to install the update, it did it via Orange Fox but then booted back into the system and gave me a msg saying it was unsuccessful.
Noticed at this point that my Magisk installation was gone as well. But that was easy enough to reinstall via Orange Fox.
Any help would be appreciated.
error23 said:
Relax guys, it's more important to have a recent security update instead of a half baked Q update...we'll receive it soon enough..
Click to expand...
Click to collapse
You are correct! And analyzing that the Mi 9 Global is receiving MIUI 11 today, I do not doubt that in a few days or maybe in two weeks we are also receiving MIUI 11 for the MI 9T Pro Global
Regards
Not sure if this is correct, but I may have some big news then. I just got an update for miui based on Android 10. Can't seem to upload the screenshot though. Version is V11.0.3.0.QFKEUXM
Evandi said:
Not sure if this is correct, but I may have some big news then. I just got an update for miui based on Android 10. Can't seem to upload the screenshot though. Version is V11.0.3.0.QFKEUXM
Click to expand...
Click to collapse
https://piunikaweb.com/2019/11/05/x...es-in-europe-former-duo-also-gets-android-10/
shajman said:
Hey guys. I've got this update showing up as well.
Is there any way to run this update while having Orange Fox recovery and Magisk installed?
I understand that Orange Fox allows this but when I tried to install the update, it did it via Orange Fox but then booted back into the system and gave me a msg saying it was unsuccessful.
Noticed at this point that my Magisk installation was gone as well. But that was easy enough to reinstall via Orange Fox.
Any help would be appreciated.
Click to expand...
Click to collapse
Anyone?
shajman said:
Anyone?
Click to expand...
Click to collapse
I got that error the first time i updated it but it's success after the 2nd try
So just redownload the update ( the original update around 430mb | the second time around 2.2Gb )
feyzna said:
I got that error the first time i updated it but it's success after the 2nd try
So just redownload the update ( the original update around 430mb | the second time around 2.2Gb )
Click to expand...
Click to collapse
Thank you for this!!!!
However weird issue now. It downloaded the 2.2GB update. Asked me if I wanted to install. I wanted to wait until later in the day to do it. But when I was ready the notification disappeared and it says there are no updates!!??
So now I'm stuck at 10.3.2.0 and the 10.3.3.0 seems to no longer exist for me
Anyone else facing this issue??
Evandi said:
Not sure if this is correct, but I may have some big news then. I just got an update for miui based on Android 10. Can't seem to upload the screenshot though. Version is V11.0.3.0.QFKEUXM
Click to expand...
Click to collapse
It is a good thing that it has already arrived, it is already available in China, India and in the Global EU but even without news in the Global MI, so generally always give the Global EU first that the MI
shajman said:
Thank you for this!!!!
However weird issue now. It downloaded the 2.2GB update. Asked me if I wanted to install. I wanted to wait until later in the day to do it. But when I was ready the notification disappeared and it says there are no updates!!??
So now I'm stuck at 10.3.2.0 and the 10.3.3.0 seems to no longer exist for me
Anyone else facing this issue??
Click to expand...
Click to collapse
Now u should see new folder named downloaded_rom, u can install the 2.2Gb update via ota / manual
feyzna said:
Now u should see new folder named downloaded_rom, u can install the 2.2Gb update via ota / manual
Click to expand...
Click to collapse
I had seen that folder when the download was done and it gave me the update notification. However now both are gone!?
shajman said:
I had seen that folder when the download was done and it gave me the update notification. However now both are gone!?
Click to expand...
Click to collapse
Same thing happened to me (have mi 9t pro 10.3.2), the 10.3.3.0.pfkmixm ota update was corrupt
Hi I am under the 10.3.3.0 (pfkmixm) and no problem, to see it change the region and then put it back.
jejemc said:
Hi I am under the 10.3.3.0 (pfkmixm) and no problem, to see it change the region and then put it back.
Click to expand...
Click to collapse
Tried this but doesn't make a difference.
Hi
I'm facing a problem with my mi 9T Pro.
After this update (10.3.3.0 PFKMIXM), when the pop up camera is activated, it shows a purple glowing on the display, next to it.
If i turn off the led of the pop up camera in the options the problem stop.
Is it a software issue or hardware issue ?
The same proble have already be mentioned here: https://c.mi.com/thread-2596121-1-0.html
spdsf said:
Hi
I'm facing a problem with my mi 9T Pro.
After this update (10.3.3.0 PFKMIXM), when the pop up camera is activated, it shows a purple glowing on the display, next to it.
If i turn off the led of the pop up camera in the options the problem stop.
Is it a software issue or hardware issue ?
The same proble have already be mentioned here: https://c.mi.com/thread-2596121-1-0.html
Click to expand...
Click to collapse
It's a design feature I think you'll find
DaveHTC200 said:
It's a design feature I think you'll find
Click to expand...
Click to collapse
You're right seems to be a feature. Thanks
In the end I just downloaded the file manually and updated via Orange Fox. Worked a treat!
Just updated to 10.0.5.HD01BA OTA.
OP7TPro Italian no brand
That's what in the update
Hi
Can We get the original boot.img
And the pached boot.img
Please!!!!!
I just realized that the album art blur on the lockscreen is gone.
Thank you OnePlus, this is seriously great!
10.0.16.HD61CB
That is my build number. Am I up to date?
Crisisx1 said:
10.0.16.HD61CB
That is my build number. Am I up to date?
Click to expand...
Click to collapse
Download oxygennupdater from play store
toolhas4degrees said:
Download oxygennupdater from play store
Click to expand...
Click to collapse
This?
Hello
Update done in OTA for a few days, no problem.
I remind you that the Oxygen 10.0.5.HD01BA version is reserved for the one + 7T Pro version HD1913.
Many have tried other models and have encountered many problems.
On the official One + website, compulsive flashers install anything on any model.
They think they can upgrade version 9.5 to v 10.0.5 etc .....
Those who install it on a One + 6T, please assume your decision and do not come to complain.
cordially
Send stock boot.img pls
Hi
since some time my cell reminds me very insistently to update it. The problem is: It can not update itself, the update process fails each time. It is rooted and I installed a ROM on it very long time ago(I think it was a lineage OS ROM)
The current version is: Android 9, Patchlevel 1.feb. 2019, RETEU
Which is the latest stable ROM I can install on my phone and where do I find it?
I found already the link
https://forum.xda-developers.com/mo...-list-stable-customs-gsi-roms-how-to-t3955624
but it is told there that NFC doesn't work. But this is a function I really need.
Is there anybody with a good idea?
Pioupus
pioupus said:
Hi
since some time my cell reminds me very insistently to update it. The problem is: It can not update itself, the update process fails each time. It is rooted and I installed a ROM on it very long time ago(I think it was a lineage OS ROM)
The current version is: Android 9, Patchlevel 1.feb. 2019, RETEU
Which is the latest stable ROM I can install on my phone and where do I find it?
I found already the link
https://forum.xda-developers.com/mo...-list-stable-customs-gsi-roms-how-to-t3955624
but it is told there that NFC doesn't work. But this is a function I really need.
Is there anybody with a good idea?
Pioupus
Click to expand...
Click to collapse
Hi,
The stock Motorola Android 10 ROM works for me on my XT1941-4.
NFC is also working.
https://mirrors.lolinet.com/firmware...LT_CFC.xml.zip
Jounas said:
Hi,
The stock Motorola Android 10 ROM works for me on my XT1941-4.
NFC is also working.
https://mirrors.lolinet.com/firmware...LT_CFC.xml.zip
Click to expand...
Click to collapse
Thank you very much. Could you please update the link? It is shortened and not working
pioupus said:
Thank you very much. Could you please update the link? It is shortened and not working
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=4349826312261754713
please push Thanks button
Jounas said:
https://androidfilehost.com/?fid=4349826312261754713
please push Thanks button
Click to expand...
Click to collapse
I have a question if I have an openeu version, should this version work on XT1941-4?
przemas48 said:
I have a question if I have an openeu version, should this version work on XT1941-4?
Click to expand...
Click to collapse
This version works for me on XT1941-4.