hi guys i have a redmi 5 plus (MEG7) ver. i already try everything to unbricket but no luck,
i already try miflash, adb, edl mode, older roms newer roms but nothing
i attache some capturs and a log file from miflash
Related
Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
Hello,
I just received my redmi note 3 SD, with globale stable rom...
I wanted to install CM13.
So first, i wanted to install global dev rom to unlock bootloader.
I tried with updater but i have an error.
I tried with fastboot global dev rom and miflash with the tuto but i have always error.
I tried different version of rom and miflash and now my phone is on black screen. I haven't any acces to fastboot mod with start button+volum - or +.... I have only red light and black screen and when i connect phone to pc i see that: Qualcomm HS USB Diagnostics 900E (com10).
Can you help me to unbrick please?
first: u dont unlock the bootloader by flashing global dev rom ... u unlock the bootloader by either request official unlock and using the official xiaomi unlock tool or use the inoffiial method.
is the red light flashing? maybe youre in EDL mode? then u can flash the whole rom
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
kevin761 said:
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
Click to expand...
Click to collapse
you don't have to be on global dev rom to unlock bootloader, i unlocked mine officially on global stable rom
I have opened the back panel, disassemble motherboard and push the 2 pins... After, my device was detected as Qualcomm 2008 and not 900E and it was detected into miflash old version...
I tried to flash the last fastboot globale stable rom but i had an error " max buffer sector is 256"... And my phone came back to Qualcomm 900E in the windows 10 settings... And it's now not detected by miflash... I need to unmount again and touch the 2 pins on motherboard...
After what i can do to flash a rom correctly?? I don't understand why i have always an error...
Use newest version miflash on windows 10. Make sure it's plugged into USB 2.0 port.
Hello,
Problem solved... I disassemble a second time the phone, i pushed the 2 pins on the motherboard.
I did the same as this tuto: http://en.miui.com/thread-245347-1-1.html
At the middle of the tuto, i don't understand why but my phone turn on with logo "Mi" at boot!!! And the phone boot correctly...
On my PC, I have unistalled all programs and reinstalled all,.. After, i have installed ROM Global dev>Unlock BL> Install TWRP>Install CM13>Install Gapps... And now the phone works fine!!!
Thanks!
So, while trying to flash a new MIUI rom to my Redmi Note 3 in EDL mode I must have flashed an incompatible rom. My phone is acting as though it is in EDL mode but only when it is receiving power from the charger or computer. I cannot boot into recovery or fastboot mode, and the MiFlash tool does not detect it. The windows device manager still detects it however. So, is my phone permanently bricked or is there a way to fix this? I will be more than happy to post the MiFlash log.
Hi i recentli brick my phone. A put twrp recovery and instal android 8. After that got no sim card and wifi network. With update miui 10 global 10.12.20 beta i made to flash phone again and after that have no connection for fastboot. I would like to flash android 9 llineage but cant install twrp and when i put phone in fastboot mode nothing happens. I install every possible driver for device and adb and still nothing. Say waiting for device...
Please help. Only need somehow install twrp.....
Try this if it works on rn4 https://forum.xda-developers.com/t/...boot-no-more-test-point-method-kenzo.3398718/
Redmi note 9 pro got hardly bricked after flashing Indonesian version stock rom.
Both the recovery and fastboot wasnt working.i tried to flash it through edl but authorization was an issue that didnt made me able to do it.
I sended the phn to a technician and he too failed to boot it properly.now it seems that the fastboot mode screen is appearing.
But the technician told me that he flashed it but couldn't fix it to boot the os..
My brothers phn ia made in india Redmi note 9 pro.but when i installed TWRP it was showing Redmi note 9S in twrp name.
Befor i flashed and booted android 12 pixel port beta 3 rom for device codename: Accidentally uninstalled Magisk and device got bootlooped.
After that i flashed oxygen os ported rom too.but it was again in bootloop .
I then tried to install stock rom in fastboot but there was version missmatch that i installed indonessian note 9 pro stock rom and it bricked hardly then.
O ya i remember i also installed a latest firmware before bricking..the device got bricked when i destroyed the fastboot by flashing wrong version rom.
Now the fastboot mode coming i didnt sure what did the technician with it..but as the fastboot mode is appearing it seems may b i can flash without edl authorization.
Any suggestions for me please?
I afraid of that definitely the technician know that how to easily flash as fastboot apperaing..but why he failed he didnt let me know