Hello,
I have huge problem with LG-H850.
I need recover data from this phone.
LGUP can't find it, in device manager is HS-USB QDLoader 9008.
I tried use z3x, axiom process, another programmer for qualcomm and reballing of UFS chip but still nothing.
https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508 <- it doesn't work
in hydra is like here: https://forum.xda-developers.com/android/help/lg-g5-h850-qualcomm-9008-hydra-error-t4043329
I need make memory dump for data recovery.
Please for help, Regards
Related
Hello , i instal the wrong bootstack in my lg g3 , then he goes dead :crying:
so i geuss i have to hard unbrick
my probleme is that after i instal the qualcomm driver , it show me in Ports(COM Ltp )_Qualcom Hs-USB QDloader 9008
Ps: Sorry for my poor engliish and please help me
Hi!
That's what it should say in this circumstance. Google QHSUSB and you'll find the directions and Windows program to recover. You'll need the 10B TOT too.
Hi!
I have nexus 5 (d820)
I've replaced battery and in a time EMMC. But the problem still remains.
The problem:
Before now the phone was continuously rebooting on an on. It does not depends what app I'm in or where I am in OS. But now it's comletely brick) And it doesn't want to boot.
So I have QHSUSB_BULK in device manager and have installed drivers. Now I have Qualcomm HS-USB QDLoader 9008 there. Then I used BoardDiag software and got broken sectors (when writing laf.mbn, boot.mbn, tz.mbn)
rgho.st / 8zDGFMtd4 (Admins, please allow me to post the link here)
The questions:
1. Can I get it working? However I really like nexus
2. Can I may be remap sectors?
3. Can I at least recover my files?
Thanks in advance, people)!
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
h901 with f600l brick
zeeshan18 said:
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
Click to expand...
Click to collapse
Yes help please ...
@zeeshan18 Follow this guide, make sure you find an image of the firmware that your phone was on.
@serdarkx Follow this guide, also find the corresponding firmware image.
EDIT: Fixed with unbricking service. No other way AFAIK. The error is caused by flashing to US998 20d from V300L 21k. Another user ran into the same error flashing from V300 21 to H930 20. So I guess the takeaway is to be careful when downgrading.
So I think I messed up and now my phone is stuck in UEFI crash (text screen with "LGE crash handler: UEFI crash"). It keeps bootlooping and I can't even turn it off.
QPST says it's in download mode when I plug it in.
Any chance I might be able to fix this?
Picture of the error screen attached
I think you need QFIL to find the emmc prog file, I also experienced the same problem.
sandking707 said:
I think you need QFIL to find the emmc prog file, I also experienced the same problem.
Click to expand...
Click to collapse
I've been messing with QPST but of course there isn't much I can do as-is.
I can use QPST by Port Qualcomm HS USB QDLoader 9008, but I do not have a .mbn file if you have a share file thanks
sandking707 said:
I can use QPST by Port Qualcomm HS USB QDLoader 9008, but I do not have a .mbn file if you have a share file thanks
Click to expand...
Click to collapse
it's a hard brick there is no solution for now (lg g5 .g6.v20.v30 ....) jus twait
im in the same situation on my v300s.:crying:
Read some other threads, there was a mention of a built in fastboot in the PBL but that seems to be untrue.
Maybe this isn't the PBL considering screen is working and there's LG branding.
I've also heard of a recent exploit for SD chipsets, something about the PBL's signature verification. If this works for the firehose, then maybe someone can modify an existing firehose to adapt for the V30, this way a leak won't be necessary. Though if anyone will bother is another matter.
seloka180 said:
it's a hard brick there is no solution for now (lg g5 .g6.v20.v30 ....) jus twait
im in the same situation on my v300s.:crying:
Click to expand...
Click to collapse
edit:
my device solved with jtag in repair shop.
Sent from my LGM-V300S using XDA Labs
So I still haven't managed to fix this, but did some reading. The phone isn't even in 9008 mode so remote repair probably isn't possible. It shows up as a LG AndroidNet device or something. It might be in 9006 mode except with LG's USB ID (1004:6340) and without an interface to the internal storage.
I tried using a tool to communicate in sahara mode but it's outdated so it can only connect to the device and not much else, the commands are mostly invalid. Interestingly when I tried to switch to download mode it requests a 1KB "AMSS" image.
Anyway I'll need a way to enter 9008 mode if I'm to get it repaired. If anyone know of a way I'd appreciate it if you share.
test point lg v30
Duo8 said:
So I still haven't managed to fix this, but did some reading. The phone isn't even in 9008 mode so remote repair probably isn't possible. It shows up as a LG AndroidNet device or something. It might be in 9006 mode except with LG's USB ID (1004:6340) and without an interface to the internal storage.
I tried using a tool to communicate in sahara mode but it's outdated so it can only connect to the device and not much else, the commands are mostly invalid. Interestingly when I tried to switch to download mode it requests a 1KB "AMSS" image.
Anyway I'll need a way to enter 9008 mode if I'm to get it repaired. If anyone know of a way I'd appreciate it if you share.
Click to expand...
Click to collapse
there are two golden points near the ribbion of battery but not the big ones under the ribbion wehen you connect both the phone will go 9008 mode
i am stuck in the very same situation as OP please if anyone has any way or idea on fixing this issues let us know and so others can benefit from it as well
thanks
Sahara mode LG v30, please help!
Hello there,
my lg v30 us998 was 10% battery. I was browsing the web and suddenly it freezed up. I cound´t do nothing until it shut down itself after a few minutes. I plugged in to the charger and the same message showed: UEFI crashed. Sahara mode... Any help please?
Not sure if it is actually possible for me. Still no solution. I was waiting for a more complete reply ...
Hello, my Lg G5(H850) is randomly turn off and i can`t turn on if i connect my phone to PC .In the Device managger i see my phone Qualcom HS-USB QDLoader 9008. I found QFIL tutorials . So i want to create the files for QFIL becouse i can`t found any files. I donwload the kdz file and the LG Firmware Extractor . The program created the dz file and after the system ..... But ti have not only the PrimaryGPT_0 becouse i have got PrimaryGPT_0 , PrimaryGPT_1,PrimaryGPT_2,PrimaryGPT_3,PrimaryGPT_4,PrimaryGPT_5,PrimaryGPT_6.
And I can`t create the rawprogram.xml and patch0.xml.
Anyone knows how i can merge the primaryGPT-s or what i do wrong or another solution ?
Sorry for my English .
Ambri said:
Hello, my Lg G5(H850) is randomly turn off and i can`t turn on if i connect my phone to PC .In the Device managger i see my phone Qualcom HS-USB QDLoader 9008. I found QFIL tutorials . So i want to create the files for QFIL becouse i can`t found any files. I donwload the kdz file and the LG Firmware Extractor . The program created the dz file and after the system ..... But ti have not only the PrimaryGPT_0 becouse i have got PrimaryGPT_0 , PrimaryGPT_1,PrimaryGPT_2,PrimaryGPT_3,PrimaryGPT_4,PrimaryGPT_5,PrimaryGPT_6.
And I can`t create the rawprogram.xml and patch0.xml.
Anyone knows how i can merge the primaryGPT-s or what i do wrong or another solution ?
Sorry for my English .
Click to expand...
Click to collapse
I' haved the same problem with a G5. If You think you can fix by your self you are just luzing time. in order to get fix the phone you need payed software and hardware (octopus).I know a guy that for 20$ can 100% fix you phone if it's not a hardware problem. Thi guy has access to many payed software and he now's what he's doing.
Sent from my LG-H850 using Tapatalk
I have the files rawprogram.xml and patch0.xml.
Sent from my [device_name] using XDA-Developers Legacy app
hey please sent me this files for h850. I have qualcomm 9008 ... in my LG
Same Issue with my H850 and need the files for QFIL
If someone has all the files necessary for Qfil please share as I can't seem to find them, I have never had this problem before. Thanks