I have an Infinix Hot 8 X650B.
I am trying to root the device. I have installed all ADB required files and the drivers.
The computer detects the drivers and the device is showing in ADB Device list.
But it's not being listed in fastboot devices check, and no fastboot command is working.
Please what can I do?
Related
I boot my Acer Iconia Tab A200 into fastboot mode (robot lying down and RED exclamation mark over it). I plug it into my Windows 7 (64bit) desktop computer with SDK installed, and from the directory with fastboot.exe I type FASTBOOT DEVICES but the device is not being seen, it just goes back to the prompt, like the command executed but didn't do anything. I assume this is because the drivers aren't installed. But I don't know how to install the "adb drivers". How is this done?
Go to Acer support page, you'll get the drivers there.
This device will not fully boot. It gets stuck at an "encryption unsuccessful" message. I'm trying to flash a rom image from my desktop computer using fastboot, but when my tablet is in fastboot mode, my desktop computer won't recognize it. ie adb devices command doesn't show that there is any device connected, and I think it's because the drivers aren't installed. I think those Acer drivers only work if the tablet can be fully booted.
Installed the Google USB Drivers from the SDK Manager already. Don't know what's wrong.
Alright I figured out how to get fastboot to interface with my Android tablet. The problem was that I wasn't getting the tablet into fastboot mode to recieve commands.
But now it's working. However, I'm trying to unlock the bootloader and it gives me an errors that says:
SetUnlockedMode: Error occured while unlock the device ...
Fastboot: Failed to set unlock mode
I have to unlock the bootloader before I flash an image to the tablet, right ?
Yep, surely.
Hello everyone, I'm using Redmi Note 3 and I have tried rooting it several times.
I have unlocked the bootloader. I have also installed the adb drivers.
When I connect phone in fastboot mode and write 'fastboot devices' in cmd it doesn't return anything. But when I connect when its on, adb devices returns the device code.
Please help.
Same, happens to mine too. Used to work with a previous install of windows, but now, nope.
Had this issue too.
Try going to Device Manager and check to see if Kedacom USB Device shows up. Under which, Android Bootloader Interface should be present. Install minimalist ADB and fastboot and right click Android Bootloader Interface. Click Update Driver Software, browse computer, and then click the option to list driver files already present on your drive. It should pull up a fastboot driver that's an older version than the one you currently have. Install that and fastboot will work again.
Doesn't work
Can you please link the files for download when we're updating the driver software.
I have the drivers installed and it shows up Android phone (adb interface) in device manager, but however, when I type in command ADB devices the phone doesn't show up in the list.
i have infinix hot 7 pro device.i tried to unlock its bootloader but fastboot is unable to detect device.device is properly installed n visible in device manager.i tried different adb n fastboot drivers n different laptop but nothing worked.kindly help me .
Hey all, I just got a G90 Pro that I want to put a ROM on, but something is up with the fastboot. I have the drivers installed according to what I found online, but when I go to fastboot there is no response from the cmd inputs. Nothing even shows up when I check fastboot devices. Has anyone had luck with these phones? I can't even unlock the bootloader!
If not already done yet, install the suitable BLUE USB Driver for Android:
Download BLU USB Driver for Windows (Latest Driver)
Download the latest and original BLU USB Driver to connect any BLU Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
If not already done yet, install the suitable BLUE USB Driver for Android:
Download BLU USB Driver for Windows (Latest Driver)
Download the latest and original BLU USB Driver to connect any BLU Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
I have done this, but did it again just to be sure, and device manager recognizes the G90 Pro under USB devices, and ADB finds it, but when I do the 'adb reboot bootloader' the fastboot mode text is on the bottom, yet fastboot commands don't do anything, not even 'fastboot devices'.
Edit: Fastboot devices is recognized in fastbootd, but not regular fastboot, yet the other commands don't work.
In your case fastboot is located in Android's user-space, hence you run this command sequence
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot <YOUR-COMMAND-HERE>
fastboot reboot
jwoegerbauer said:
In your case fastboot is located in Android's user-space, hence you run this command sequence
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot <YOUR-COMMAND-HERE>
fastboot reboot
Click to expand...
Click to collapse
Fastboot reboot fastboot just brings up the fastboot command list. Assuming it's expecting me to try reboot bootloader.
That's really weird because your phone is running Android 10.
My info in settings definitely confirms that. Nothing seems to be working as expected though.
jwoegerbauer said:
That's really weird because your phone is running Android 10.
Click to expand...
Click to collapse
Is there any other possible solution? I still can't get fastboot commands to work after rebooting to fastboot mode from fastbootd.