I have an Amazfit Pace International version with 1.3.5 OS version. Original version
Can you advise me what is the proper version to upgrade my watch, PACEFied or STOCKFied?
I'm sorry but I don't understand if my watch have both compatibility and differences between.
I think that due of my watch is 1.3.5 I need upgrade to STOCKFied. Can you confirm me please?
Thank you and excuse me, but I don't want to brick my watch
If you want voice commands (in Chinese only), Mi Home app and AliPay
go with PACEFied
If you want easy Strave connection, go with STOCKFied.
If you don't care about any of it, I would go with PACEFied
Why?
because it's based on the CN version, and not on the US version
and the CN version gets updates more frequently (not that it should matter to most people).
Hi!
This mods of MiFit show call ID with non english interface on the phone.
Also mod contains patched firmware for Amazfit Bip and Cor. With this firmware Chinese version of the smartwatch becomes international (CE) until the firmware from this mod will not change to original.
MiFit 3.3.4.10
MiFit 3.3.4.9
MiFit 3.3.4.6
MiFit 3.3.4.1
MiFit 3.3.1
MiFit 3.3.2.2
MiFit 3.3.2.1
With 4 digits in the application name there is a beta version
How to use :
How to use when the watch is unpair (for example the new watch after purchase) :
Install apk
go to Mi Account (if you have not it, start a new one). Do not enter to MiFit through Google or FaceBook account!
make pair the watch with MiFit
wait for MiFit to update the firmware and resources.
------------------------------------------------------------------------------------------
How to upgrade prevision version of my mod:
Install new version apk
to wait for MiFit to update firmware and resources.
------------------------------------------------------------------------------------------
How to use when the watch already paired with stock version of Mifit. If it was paired with use Goole or Facebook account - begin from 1. If it was paired with Mi Account - begin from 5
to make unpair - Profile->Amazfit Cor->Unpair
[*]exit from MiFit - Profile->Settings->Sign Out
[*]go into the MiFit with use Mi Account (if you have not it, start a new one)
[*]pair the watch with MiFit
[*]uninstall stock version of MiFit without unpair
[*]iInstall modified Mifit from the list
If version of firmware in the watch is less than contains in apk, the firmware will be updated and English will become as default.
If the version is the same or over , then the firmware will not change and English will NOT become as default!
------------------------------------------------------------------------------------------
Use it at your own risk
hefk59 said:
Hi!
This mod 3.3.2.1 version show call name with non english interface on the phone.
Also mod contains patched firmware for Amazfit Bip and Cor. With this firmware Chinese version of the bracelet becomes international (CE).
Replace "--" to "tt" for download:
h--ps://depositfiles.com/files/tnynj71is
This is beta version apk and fw! Last stable is 3.3.0.
Click to expand...
Click to collapse
Hi, i have lately bought a smartband cor ...chinese which i have updated to eng fw . I was wondering if this version of mifit will force me to upgrade the band firmware loosing the eng firmware that i installed. Tnx
DrKup said:
Hi, i have lately bought a smartband cor ...chinese which i have updated to eng fw . I was wondering if this version of mifit will force me to upgrade the band firmware loosing the eng firmware that i installed. Tnx
Click to expand...
Click to collapse
If now the version of a firmware is lower 1.0.7.35, then it mod will update a firmware and there will be English instead of Chinese
Is it a Permanent Conversion or it will be reflashed with CN version with the next MI Fit update?
This is not permanent, it only works while this firmware is being used. I plan to continue to release modified versions of mifit, if use them, the firmware will be changed again to CE.
hefk59 said:
This is not permanent, it only works while this firmware is being used. I plan to continue to release modified versions of mifit, if use them, the firmware will be changed again to CE.
Click to expand...
Click to collapse
Hi mate! Nice job!
So... Just to clarify things. The firmware you are sharing change the bip cn to international version, but future mi fit apk wont recognice it as ce and will uptade the firmare to cn? An I right?
For last (sorry for so many questions), If you know ... Just for curiosity.... I dont understan why we cant turn a cn into ce permanetly if they share the same hardware.
Thanks, friend!
I have already installed the version 3.3.0 and it updates firmware on my amazfit Cor Chinese version. Now I installed the APK version you propose, but the amazfit cor can't connect to the app. What I am wrong? The new APK can downgrade firmware?
Thank you.
---------- Post added at 09:57 PM ---------- Previous post was at 08:57 PM ----------
I have already installed the version 3.3.0 and it updates firmware on my amazfit Cor Chinese version. Now I installed the APK version you propose, but the amazfit cor can't connect to the app. What I am wrong? The new APK can downgrade firmware?
Thank you.
sauliiin said:
Hi mate! Nice job!
, but future mi fit apk wont recognice it as ce and will uptade the firmare to cn? An I right?
Click to expand...
Click to collapse
yes, if use stock mifit. If use my new mod, it will again be CE
I dont understan why we cant turn a cn into ce permanetly if they share the same hardware.
Click to expand...
Click to collapse
hw version is in a special area of flash memory and it's easy to change. But just yesterday kmz7 found a way to change the version of hw and already quite a few people have made Amazfit Bip CE permanently. But this method requires skills using Gatget Bridge
https://4pda.ru/forum/index.php?showtopic=845160&view=findpost&p=71368053
marco2018 said:
I have already installed the version 3.3.0 and it updates firmware on my amazfit Cor Chinese version. Now I installed the APK version you propose, but the amazfit cor can't connect to the app. What I am wrong?
Click to expand...
Click to collapse
strange ... there was not a similar case for now .... try to temporarily set English on phone
The new APK can downgrade firmware?
Click to expand...
Click to collapse
no, mifit can only upgrade the firmware version
hefk59 said:
yes, if use stock mifit. If use my new mod, it will again be CE
hw version is in a special area of flash memory and it's easy to change. But just yesterday kmz7 found a way to change the version of hw and already quite a few people have made Amazfit Bip CE permanently. But this method requires skills using Gatget Bridge
https://4pda.ru/forum/index.php?showtopic=845160&view=findpost&p=71368053
Click to expand...
Click to collapse
Wowwwwwww! Good news! But aparently the file is down.. Do you have it to share?
I will try to do it if I find the file, but google translator its not really helping me... If someone could tranlate or explain this to me:
Ресурсы должны соответствовать прошивке (иначе в меню не попадете).
Thanks for the anwser!
sauliiin said:
Wowwwwwww! Good news! But aparently the file is down.. Do you have it to share?
Click to expand...
Click to collapse
kmz7 gave me a link
https://yko.im/Okdc.zip
Ресурсы должны соответствовать прошивке (иначе в меню не попадете).
Click to expand...
Click to collapse
.res file must match the .fw file
p.s. I made a small correction to the Google translation
Inside two files, Mili_chaohu_makece.fw turns to the international version (0.11.2.4), Mili_chaohu_makecn.fw back to the Chinese version (0.11.1.4).
Version 0.1.0.86. The version change is implemented in the Factory Reset function, instead of changing mac addresses.
Install firmware Mili_chaohu_makece.fw with GadgetBridge. If there is a need, or you do not know what is necessary, then you must install Mili_chaohu.res from the orig folder! .
Before the implementation of Factory Reset, I recommend to unbind smartwatch from all software (gadgetbridge, MiiFit, etc.). Go to the smartwatch in the menu, settings, Factory Reset , press Ok (yellow button), the smartwatch will ask you to press and hold the button to confirm. After that they will reboot, and most likely there will be a picture of the phone <-> smartwatch on the screen. All,
can be tied to the MiFit. The smartwatch should come to life and update the agps.
After that you can install the required firmware. The version changes forever. If you want to return the version of hw, do the same with Mili_chaohu_makecn.fw.
The transformation of the original international version into Chinese was not tested (and I do not know why it might be necessary),
but I think problems should not be.
Click to expand...
Click to collapse
and the most important thing
All actions at your own risk! The probability of getting a brick is not zero
p.p.s this applies only to Bip, NOT for Cor!
hefk59 said:
kmz7 gave me a link
h--ps://yko.im/Okdc.zip
.res file must match the .fw file
Click to expand...
Click to collapse
Thanks! Kind of afraind of doing it, but going to do anyway
My watch is on latest best firmware 0.1.0.99. If using the files included in the link will I be good to go?
Sorry for the offtopic question... Will end this subject here. If I do it succefully will share! Thanks
sauliiin said:
My watch is on latest best firmware 0.1.0.99.
Click to expand...
Click to collapse
you must install the Mili_chaohu.res file from the orig folder. Now you have installed .res 0x1d version, and for 86 firmware you need a .res file of version 0x1c
hefk59 said:
you must install the Mili_chaohu.res file from the orig folder. Now you have installed .res 0x1d version, and for 86 firmware you need a .res file of version 0x1c
Click to expand...
Click to collapse
Yep!
Thanks again! After 2 soft bricks and 2 fail attempts, I did it
The first try I forgot about the res file, the second about factory reset and than... I really dont know what I did wrong or right but finaly work! :silly:
Now my bip is international
Cant recommend for those who are ansious or dont know how to solve a soft brick or dont have a deeper knolege and can hard brick the device... Its better to wait for a step by step very dettailed english tutorial!
Anyway.. Thanks for sharing! All is good for me
Let's Hope to see It for Cor
hefk59 said:
Hi!
This mod 3.3.2.1 version show call name with non english interface on the phone.
Also mod contains patched firmware for Amazfit Bip and Cor. With this firmware Chinese version of the bracelet becomes international (CE).
https://depositfiles.com/files/tnynj71is
This is beta version apk and fw! Last stable is 3.3.0.
Click to expand...
Click to collapse
Have you planned to modify the lastest 3.3.2.2 version?
jmadotme said:
Have you planned to modify the lastest 3.3.2.2 version?
Click to expand...
Click to collapse
yes, I have already done this, now I will prove to this site that I am not a robot , and I will give a link
http://depositfiles.com/files/xlhjyk2z0
hefk59 said:
yes, I have already done this, now I will prove to this site that I am not a robot , and I will give a link
http://depositfiles.com/files/xlhjyk2z0
Click to expand...
Click to collapse
Oh thanks man!
HI Guys!
One Question.
Before i had the Mi Band 2 and there is that Feature, that the Band vibrates short if you tap to see your updated Heartrate.
The Cor doesnt have that Feature?
Its some annoying, coz in my Eyes the Cor needs some longer to detect Heartrate and if you not look at the Band all the time, you dont recognize its done and gone after some seconds, coz of Display Timeout.
anyone can explain step by step ?
Hi. I have an Amazfit Nexo Global Versión (AC1817). And it has the 1.0.0.0 firmware version.
I read some information, and I see other people in the same situation.
I know that there is more actual version of this firmware. I send an email to Amazfit Europa and confirm to me that there is newer version of this firmware.
I try to update via OTA from the watch and from the app, and always have the message that I am in the newest version.
I try to make hard reset.
I try to send a report to Amazfit
I try everything that Amazfit explain to me in his email.
No results
Amazfit said to me that contact to my reseller, but this is difficult to me.
Any one has a solution?
Any one knows where can I download the new firmware and how to install it via PC?
I look for information in the net and I can't find anything.
Thanks in advance.
Enviado desde mi Mi9 Pro 5G mediante Tapatalk
Can u help me with the firmware for amazfit Bip U
what for? you can't crossflash CN to global and globals to CN.
2days ago, i installed Notify for Amazfit app to install custom font. I saw something to see all emoticons, a font. But after update, my band shows "update failed".
Today, I changed the font from watch setting and it show updating firmware and i got it back.
thanks anyway