Hi Folk,
on my a5y17lte, with Lineageos 16, I saw a lot outgoing ntp connections! The list of servers start slowly and grows over the time up to 77, or more! Depends on how long the phone is up. After a reboot starts from begining.
Ok, it's a cool feature to sync the time over network, but 77 time!?! It makes no sense to ask 77 times about what time it is.
Additionaly the server don't look serious. The most of my apps are from F-Droid store and I've got only a handfull of Playstore apps.
Who can help me find out where the connections comes from? Is that normal on android and does somebody have the same effect?
Netstat -p wont tell me an app.
Here're some example of the connections:
176.9.81.252,bar.bandie.org,123,37.83.151.177,60284,UDP4,ESTABLISHED,
185.16.60.96,tick.infra.9rc.de,123,37.84.159.221,43991,UDP4,ESTABLISHED,
51.15.91.217,217-91-15-51.rev.cloud.scaleway.com,123,37.84.142.93,52192,UDP4,ESTABLISHED,
144.76.100.49,wtfstfu.org,123,37.82.183.166,46064,UDP4,ESTABLISHED,
144.76.59.37,funky.f5s.de,123,37.80.147.21,40166,UDP4,ESTABLISHED,
193.30.35.49,impartial-slip.squareflow.cc,123,37.81.165.4,48366,UDP4,ESTABLISHED,
78.46.253.198,maggo.info,123,37.84.181.143,60798,UDP4,ESTABLISHED,
51.15.182.163,par.cyberbits.eu,123,10.8.0.1,40432,UDP4,ESTABLISHED,
129.70.132.33,stratum2-4.NTP.TechFak.Uni-Bielefeld.DE,123,37.85.239.111,44575,UDP4,ESTABLISHED,
116.202.64.148,dns02.xstream-labs.com,123,37.84.87.87,40932,UDP4,ESTABLISHED,
144.76.96.7,golf.zq1.de,123,37.81.174.215,45239,UDP4,ESTABLISHED,
157.230.114.16,ntp2l.versadns.com,123,37.84.159.91,49424,UDP4,ESTABLISHED,
212.18.3.18,ntp1.m-online.net,123,37.85.191.13,33081,UDP4,ESTABLISHED,
80.237.128.148,ntp1.hosteurope.de,123,37.85.33.74,51562,UDP4,ESTABLISHED,
193.30.35.11,mortified-chicken.squareflow.cc,123,37.85.38.3,37230,UDP4,ESTABLISHED,
37.221.195.24,ares.cativa.net,123,37.82.75.176,43560,UDP4,ESTABLISHED,
5.199.135.170,ve1124.venus.servdiscount-customer.com,123,37.81.150.92,33354,UDP4,ESTABLISHED,
188.68.54.217,finkenzeller.eu,123,37.82.239.225,45818,UDP4,ESTABLISHED,
Thanks a lot
Nowbody have an idea, or can check if its normal?
It takes only a small "netstat" comand at the terminal.
I did a fresh new test installation on a second device. After installed my common apps the ntp connections grows again!
@schlombie
The connections you listed in post #1 show their related domain name in readable fashion. So what's your problem?
To prevent all or some edit your device's host file.
jwoegerbauer said:
@schlombie
The connections you listed in post #1 show their related domain name in readable fashion. So what's your problem?
To prevent all or some edit your device's host file.
Click to expand...
Click to collapse
I want to know which app initiates these connections?
After 3-4 day without a reboot, I've got more than 50 open connections who uses my battery and my data!
Related
WMDreamRemote (WMDR) - with streaming
UPDATE (22/04/2012): No more deadlines. The reason is that I am busy with other projects. I might implement other features in future. You can download from my web-site, http://www.tillekesoft.com. There you can find as usual two versions. One version is for devices using 320x240 but it should work fine also with devices having a resolution of 640x480. For all other resolutions, please use the other one. For existing users, you just need to replace the old executable with the new one.
06/10/2010 - I have attached a "step-by-step"-guide for setting up WMDR - in particular what regards streaming (it is in English but you can use Google Translation-tools to translate it to another language). Hopefully, this will make it easier for new users to get WMDR working.
IMPORTANT (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WMDR is not compatibile with the latest version of VLC. So if you want to use WMDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
Change-log: nothing so I am leaving old change-log here below:
This version is more like a Service-Release fixing some bugs and introducing few new features:
-fixed issue when using WMDR with Enigma2 outside your LocalLAN where WMDR passed on a DynDNS-address to the Dreambox instead of LocalIP-address which is the correct way. Thanks to mkbm for finding this bug.
-fixed streaming-issue in Enigma2 when changing between channels located on different transpoders would cause problems. Thanks to mkbm for explaining this.
-improved error-handling (clearer messages). Still to be improved further.
-possibility to kill stream when exiting WMDR
-other minor bug-fixes
-some optimization
-added a program-icon (it's very basic - if you can come up with a better-looking icon, please do so and post it here in the thread)
-fixed issue with DM8000
To see WMDR in action (using a pre-release of Beta 0.7), watch this video posted by XDA-user ajocius on YouTube:
Background: After on-going discussions in this thread http://forum.xda-developers.com/showthread.php?t=616353 regarding an application to control remotely the Dreambox, I decided to write an application to accomplish this request.
In above thread, a very simple and crude beta-application was posted. Now, the application has evolved further and therefore I reckoned it was more appropriate to open a new thread in this area which is meant for Window Mobile applications.
Extra Information: The Dreambox is a series of Linux-powered DVB satellite, terrestrial and cable digital television receivers (set-top box), produced by German multimedia vendor Dream Multimedia. It's "kind of" of open-source which has led many "teams" to develop so called "images" for this receiver as an alternative to the original one furnished by Dream Multimedia. In addition, many other hardware manufactures have produced their own receivers (some of them are actually clones while others are not) using the same concept of the Dreambox i.e. Linux-powered. The Dreambox has evolved during the years and many models are present on the market. The first ones are/were using a firmware called "Enigma" but, more or less, with the introduction of High Definition TV, a new firmware was released, namely "Enigma2". One of the "revolutionary" features of the Dreambox was that you can connect it to your local network and this opened up a whole new word compared to ordinary satellite-receivers. To get further information, just google for Dreambox or look it up at Wikipedia.
Background for the application: You can read the original thread mentioned above to get an idea why people wanted an application like the one I am releasing. In a few words: since you can access the Dreambox (or any other satellite-receiver based on Enigma or Enigma2) through your local network or through Internet, there are many things you can do remotely (at work for instance) such as handling timer-events, read EPG etc. The ideal way of doing it, especially if you don't have access to a PC, is to use a handheld device. It was brought to our attention, that there are plenty of applications to do what mentioned above already available for download on the Appstore for iPhone.
for instance:
http://appspace.com/apps/view/38502/idreamremote/
http://appspace.com/apps/view/40338/dreamon/
So, it was suggested to write a similar application for Windows Mobile. And here it is, still in beta although with quite a lot of features implemented, even Streaming-support.
Current Features:
-Streaming
-Remote Control
-Bouquets-/Channels-lists from where you can:
1) change channel
2) view EPG
3) set timers
-Controlling the receiver (Shutdown, Reboot etc)
-Supports set-up of multiple profiles (e.g. At work, home, bedroom)
-Supports set-up of multiple streaming-profiles (Local LAN, WLAN, mobile)
Known issues:
-is not compatible yet with old WebIf (1st generation) of Enigma2
-there might be some problems with certain characters not appearing correctly (please report if you have this problem)
-in 320x240 version when setting up Enigma-profiles, you might need to click twice in the various textboxes.
Features to implement in upcoming versions (not necessarily in this order):
- SMS (Send shortmessages to the TV-Screen)
- improve error handling further
- other ideas/stuff
- user-suggestions (your feedback for improvements)
- re-design the remote-control using png-images instead of jpg which should make the application a bit smaller (and require less memory)
- resolving above mentioned issues
- other bug-fixes
- support for other receivers - requests I have received are for D-box2 and IPBox HD (non Enigma)
- cosmetic issues
- Https (SSL) support. (tested and working but needs a specific hotfix-version of CF.NET (published by Microsoft) due to a bug in CF.NET)
Requirements:
-Compact Net Framework (2.0 should be sufficient)
-an Enigma-based receiver such as the Dreambox, IPBox etc..
-for streaming, please see second post below
Installation:
Note: I have not made any CAB-file.
Note2: If you want to keep your old settings and streaming-profiles, you may do so. Just replace the old WMDreamRemote.exe with the new one.
1) download the zip-file attached to this post and extract the files on your computer.
2) Copy the files into a directory of your choice on your device (internal or
storage). The files must be in the same directory.
3) Run WMDreamRemote.exe. The first time, you will get a message
saying "No connection....".
4) Choose Preferences/Profiles from the main-screen and ADD a new
profile inserting your data. Put the flag on default for the profile you use the most.
5) Then click Save Profile.
6) Go ahead if you wish to add other profiles.
7) You may delete my dummy-profile "home" (only after having added your own though) using
the Del-button. NOTE: It's important that there is always one profile present (with Default selected)
otherwise there might be unexpected errors
8) On the main-screen, you can now use the remote-control by selecting its button
9) You may also see a bouquet/channel list by clicking on its button. However, the first time the list will be empty. Therefore,
10). Go back to Preferences/Profiles and select the profile you want to use. Now select the
button named "Create Bouquets for this profile". This will take a minute or two. It will download
your bouquets and channels from your Dreambox. Do the same for each Profile you create.
11) Now you can scroll your bouquets ad channels.
12) Set up streaming-profiles (3 dummy profiles are provided for Local-LAN, WLAN and mobile) - see second post for more information
There might be some unhandled error-messages occasionally. They are mostly due to connection-problems. Just click on continue and retry unless you have indeed a permanent error with your connection.
Please test it and let me have your error-reports, feedback and suggestions for improvements. Please also indicate which device, Dreambox (or similar receiver) you are using and which image.
I must also express my sincerest thanks to XDA-user ajocius for:
-giving me access to Enigma2,
-his superb beta-testing,
-sharing his knowledge about streaming
-and of course for the great video he posted on YouTube (see above).
I have also attached some screenshots.
PS: ANDROID - Just a note to tell you that I posted here on XDA an Android-application for watching your Dreambox in streaming (LocalLAN and 3G). I called the application AndroidDreamer and you can find the thread here: http://forum.xda-developers.com/showthread.php?t=861145
If you want to test and discuss AndroidDreamer, head over to the thread. Please keep this thread for WMDR.
PS2: WINDOWS - I have published a Windows-version (WinDreamRemote or simply WinDR). You can find it on my web-site: http://www.tillekesoft.com
For discussions regarding WinDR, please use the thread mentioned on my web-site. This thread here at XDA is for WMDR - mobile version. Please respect this.
This is it for the time being.
STREAMING
Streaming works great for me, especially at home (in my Local LAN) but also at work (using WIFI) and even at the supermarket using a mobile-connection (3G) although the quality degrades.
For you, I don't know - Streaming may work, may work so and so or may not work at all.
It depends on a lot of factors:
-For Local-LAN: your WIFI set-up at home (11g, 54g etc)
-For WLAN or mobile: upload/download speed of your Broadband (normally upload-speeds are slower than download-speeds (ADSL)
-Your device
-Your computer acting as VLC-server
-not finding the right configuration in stream-profiles settings
-etc
What you need:
1) VLC (Videolan). Just Google for it and install it on your computer which will act as the VLC-server. I have only tested streaming using VLC running on Windows but it should work on VLC-servers using Linux and MAC as well. If it doesn't, please let me know. I have only tested version 1.0.5 of VLC so I am unable to say if previous versions will work.
UPDATE (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WinDR is not compatibile with the latest version of VLC. So if you want to use WinDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
2) TCPMP (free and which you can find here on XDA) or Coreplayer (not free). Make sure that ASX-files are opened by the program you installed (look in the programs' settings for file-association). Some say that TCPMP is faster to load the stream (5-6 seconds in my Local-LAN) than Coreplayer. On the other hand, some say that Coreplayer is more fluid. The choice is yours.
3) A rather modern and fast device. It might work with slower devices as well but you may have to play a lot with your VLC-configuration (bitrate etc) before you get it to work
4) and of course WMDR
How to set up everything:
1) install VLC on your computer which will act as the VLC (streaming) -server. Then under the menu, select "View" in the English version (not sure since I have it in Italian) and then select "Add Interface" and finally you select "Add Telnet-interface". If you haven't changed anything, the default password for Telnet is admin and the port in use is 4212. That's it. VLC must be running to get streaming working. There are options to install VLC as a Windows Service or you can create a bat-file to be executed upon launch of your VLC-server. I guess similar options are availabe on Linux and MAC as well.
2) if you are going to use streaming outside your Local-LAN, you must ensure that you have set up port-forwarding correctly in your router. You must ensure that the WebIf can be accessed. You must ensure also that port 4212 (for Telnet) is opened and forwarded to the VLC-server. The same goes also for the streaming-port on the VLC-server which TCPMP/Coreplayer needs to access to receive the stream. So, basically you need to set up port-forwarding for one port for accessing the WebIf of your Dreambox and two ports for accessing your VLC-server.
3) A typical VLC-command to get streaming going is as follows:
Code:
vlc.exe" -vvv [url]http://192.168.1.130:31339/0,0025,0384,0385,0295[/url] --sout #transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst=192.168.1.12:8085}}
Here are some explanations:
- the part "vlc.exe" is handled by WMDR using Telnet. You don't need to anything except for filling in information regarding the IP-address of your VLC-server, its password and which port to use.
- the part
Code:
"http://192.168.1.130:31339/0,0025,0384,0385,0295"
is your dreambox-ip, the port used for streaming and some channel-parameters. These parameters are handled automatically by WMDR and do not require your attention
- the part
Code:
"#transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst="
is the one you have to insert in WMDR and which you need to experiment with to get the best picture/quality/fluidity according to your connection-speed. WMDR is pre-installed with 3 examples which are working on my HD2, my WIFI (using 54g) and my ADSL with an upload speed of 512kb. You can use those as an example and then modify them according to your needs.
- the part "192.168.1.12:8085" is the IP of your VLC-server and the port which TCPMP/Coreplayer should connect to in order to get the stream. You fill in this information in the stream-profiles.
With this information, you can set up your streaming-profiles in WMDR. In the streaming-profiles, you will find an additional setting called "VLC Sleep Delay". You can leave it at 200ms as its default-value. This parameter is used by WMDR when "talking to" VLC via Telnet. If the connection is very slow, you can increase this value but normally, even on Mobile-connections, the value of 200ms is OK.
Above information should get you going.
If you have problems with streaming, look at the points mentioned above since it is unlikely due to WMDR itself and that I can do anything to resolve your problems.
Good luck!
TIPS AND TRICKS:
-To make TCPMP open up automatically in full screen mode, you can do the following registry-edit:
Code:
HKEY_LOCAL_MACHINE\Software\TCPMP\PLAY
DWORD 123
Change value from 0 to 1
-For associating the file-extension ASX with TCPMP, do as follows: In TCPMP it is under:
Options -> Settings (you need to scroll down to see that option) - > Click button "Select Page" - > File Associacions
Click to expand...
Click to collapse
-As far as I have understood, TCPMP has been discontinued but there are some people updating it from time to time. If you have problems viewing the stream, it may (perhaps) be because you are using an old version of TCPMP. Here are two links to TCPMP which I have found working on my HD2:
http://forum.xda-developers.com/showpost.php?p=5657963&postcount=1
http://forum.xda-developers.com/showpost.php?p=5685536&postcount=1
TROUBLESHOOTING
- If you get errors in TCPMP (unknown file format, crashes) or if you don't see anything at all, you can try the following to trace where the error originates:
Select Stream in WMDR and if you get an error message from TCPMP, just disregard the error and put your device on the table or wherever. Don't click on anything. Don't kill the stream. Now, in the folder of WMDR on the device, you should find a file called WMDR.asx. Copy this file to your desktop (on a PC). Go to your PC and right-click on WMDR.asx and choose "open with" and select VLC (it will open another session of VLC). If you now can see the stream from your Dreambox on your computer-screen, then it means that WMDR comunicates correctly with VLC and most likely there is a problem with TCPMP/Coreplayer or because the file is too large/complex to be seen on the device. If you don't see anything, then probably there is a communication-problem between WMDR and VLC. Check IP-address, Port and Password of VLC.
- Make sure that streaming actually works between your Dreambox and VLC (without using WMDR) and that you can watch the streams on your computer. You can test this by using the web-interface of your Dreambox or you can search internet for instructions. If you have problems (can't see anything at all, bad quality, buffering-problems etc), then the problem itself lies with the source and there is no way streaming will work in a satisfying way. For instance, it has been reported that cheap (clones of) DM500 might have problems with streaming.
is this like a remote control app for any settop boxes and tv's that uses ir port or is it limited to the Dreambox?
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
trickbiker121 said:
is this like a remote control app for any setop boxes and tv's that uses ir port or is it limited to the Dreambox?
Click to expand...
Click to collapse
tilleke said:
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
Click to expand...
Click to collapse
sorry this isnt the app that i thought it was sorry to bother you
Hi Tilleke
Very nice looking release. I'm really happy with it!
i have tested it and here are my results:
Main screen > remote controle > page 2 > the numbers are not working here.
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do...
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Thanks for testing and posting your results.
Can you please let me know which receiver you have and which image you are running. And on which device did you test it?
Will check this better.
citychannel said:
Main screen > remote controle > page 2 > the numbers are not working here..
Click to expand...
Click to collapse
When creating the bouquets, did you follow the procedure written in the first post? I am saying this since that part is not fool-proof yet. Did you reach the point when a message appears indicating "Update ready" or did it crash before. BTW: I have never seen a crashed dreambox with a blue screen I'd love to able to reproduce that error
citychannel said:
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do.....
Click to expand...
Click to collapse
Thanks!!
citychannel said:
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Click to expand...
Click to collapse
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
thanks for your report.
1) OK, you've got DM7025 and running Enigma(1). Are you using the original image or have you flashed another image such as Gemini, Nabilo...If yes, which one?
2) Can you access the WebIf of the DM7025 using your local network and using a normal web-browser? In your browser, you should use:
Code:
http://ip-address of DM7025:port
it should then ask you for a user-name and password, normally root and dreambox.
example:
Code:
http://192.168.0.83:8888
If you are using the standard port (80), it could also be:
Code:
http://192.168.0.83
When you are connected to the WebIf and clicking on ZAP, can you see your bouquets and channels?
3) The time-out bug: What message do you get. Can you please transcribe it? Does this happen when you are connected using WIFI or when you are connected using the data-connection of your phone-provider?
4) what device are you using?
Sorry, but I need above information otherwise I really don't see how to track down the errors you mentioned since I can't reproduce them on my system/device.
PS: I confirm that the numbers on the 2nd screen don't work. I forgot to enable a few lines in my code. Will be corrected in next version. Thanks for finding out.
citychannel said:
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
Click to expand...
Click to collapse
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Glad it works.
Thanks for reporting the problem with the German letters. This probably means it would be a problem with other characters as well. I will check this issue and see if I can correct it in next release.
Bib_x said:
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Click to expand...
Click to collapse
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Thx for the suggestion. I'll see what can I do.
Bib_x said:
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Click to expand...
Click to collapse
Yep. Already reported by citychannel. See first post under known issues.
Bib_x said:
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Click to expand...
Click to collapse
Thx for the information. This will facilitate tracking down the error and how to resolve it.
citychannel said:
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
Click to expand...
Click to collapse
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
It already works...
I have a profile called "away" which I use to set timer-events when I am not at home. Set up a new profile and in the IP-address-field, just write your DynDNS-address and in the Port-field the port you are using.
You might, of course, need to enable portforwarding in your router-settings.
Hope this helps.
^^MeX^^ said:
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
Click to expand...
Click to collapse
A little bit offtopic:
Do you know which ports i have to forward in my router if i want to stream my dreambox-tv-program over internet with vlc?
Streaming in LAN works well, but i want to watch TV outside my home, too.
Hi Folks,
My company is importing some Android-based TV boxes from China, and we're experiencing a strange bug with some apps we are developing to run on them. I'm trying to find a specific solution that I can tell them to implement in a firmware upgrade, but I am not sure where to look, so I hope someone here can help!
Anyway here is the problem. In some apps (especially Adobe AIR-based ones), there seems to be a limit to concurrent HTTP requests to a web server. On an earlier ICS 4.0.4 firmware for these devices, this did not cause any problems. But they recently released a JB 4.1.1 firmware, and this problem occurs.
Let's say an app requests 20 items by HTTP from a web server (XML files, PNG or JPG images). What will happen is about 2/3 of these will be sent back, and the rest just remains blank, as if in a perpetual waiting status.
Looking at the web server's logs, there is no requests at all for these missing items.
And, it's totally random. If you re-launch the app, the missing items will be different ones.
So, I am guessing the app can only request so many things at the same time.
No, does anyone know of a system property that could be adjusted to solve this?
BTW I am unable to replicate this bug on any other device. The TV boxes in question are based on Rockchip 3066 SoC's
Using modern HTTP (i.e. HTTP/1.1), you should never open an excessive amount of sessions. Never more than four simultaneous. Using HTTP/1.1 keep-alive, all requests are sent using those four sessions interleaved. If opening one session per object, and doing this in parallel, you'd most certainly lose things due to resource starvation, e.g. the server gets out of worker forks.
That's the weird thing, on the web server, keepalive is on (I also tested with it off, it was worse)
So maybe it's the opposite, AIR or the firmware or something is trying to send more requests than it should, so some are blocked indefinitely?
eTiMaGo said:
That's the weird thing, on the web server, keepalive is on (I also tested with it off, it was worse)
So maybe it's the opposite, AIR or the firmware or something is trying to send more requests than it should, so some are blocked indefinitely?
Click to expand...
Click to collapse
Not blocked, but replied with a TCP reset. Run tcpdump to see what's going on.
Thanks for the tip, I managed to root the box and run tcpdump on it, but I'm a bit lost now... I tried to filter RST packets on port 80 but can't seem to find any.
Any hints on what I should look for/command syntax to use?
eTiMaGo said:
Thanks for the tip, I managed to root the box and run tcpdump on it, but I'm a bit lost now... I tried to filter RST packets on port 80 but can't seem to find any.
Any hints on what I should look for/command syntax to use?
Click to expand...
Click to collapse
Dump all packets between the hosts: tcpdump -i ethx -s1500 -w packets.pcap host host.nr.one and host host.nr.two
Run the app, then analyze the packets.pcap file for any anomalies (tcpdump -r packets.pcap).
Hello everyone !
I have a problem that may have been addressed many times before. I do apologize, but the search didn't bring me needed answers. I also apologize for any bad english.
Here is the deal :
I am concerned with the "background data" the android os transfers via my mobile internet.
I rooted the phone, cleared all the useless .apk's from /system/app folder (even removed google play and as much of google stuff as i could), installed DroidWall and set very strict firewall rules ...
And still when i open data usage in settings menu, i see "android os" transfered 6.6mb in past 20 days. WHAT is that stuff ?!
I only use internet for stock e-mail, naked browser, internet radio, and wolfram alpha. Only those 4 applications should ever use the internet. I wish that not a single byte of data is ever EVER transfered besides the needs of these 4 applications. I do not want "Android Os" or any other background process connecting to any server on the internet "behind my back".
I am not very experienced in android os. But if it is required, i will learn how to flash another rom, to cook rom, learn and do anything i can to take COMPLETE control of the bandwith, if it is possible. Is it ? If it is, the main question and the reason i posted this thread is : HOW ? Just please do not assure me that that data is nothing to worry about, or ask me why do i care. If you can say nothing about solution, you can not help me.
The device is 2011 Xperia Pro (mk16i) and android version is 4.0.4
Thanks in advance !
There are some data between your phone and google server. Recall some phones have feature to disable background data. Not sure whether your phone have it.
You could try some tool to monitor what application creates link.
themima said:
Hello everyone !
I have a problem that may have been addressed many times before. I do apologize, but the search didn't bring me needed answers. I also apologize for any bad english.
Here is the deal :
I am concerned with the "background data" the android os transfers via my mobile internet.
I rooted the phone, cleared all the useless .apk's from /system/app folder (even removed google play and as much of google stuff as i could), installed DroidWall and set very strict firewall rules ...
And still when i open data usage in settings menu, i see "android os" transfered 6.6mb in past 20 days. WHAT is that stuff ?!
I only use internet for stock e-mail, naked browser, internet radio, and wolfram alpha. Only those 4 applications should ever use the internet. I wish that not a single byte of data is ever EVER transfered besides the needs of these 4 applications. I do not want "Android Os" or any other background process connecting to any server on the internet "behind my back".
I am not very experienced in android os. But if it is required, i will learn how to flash another rom, to cook rom, learn and do anything i can to take COMPLETE control of the bandwith, if it is possible. Is it ? If it is, the main question and the reason i posted this thread is : HOW ? Just please do not assure me that that data is nothing to worry about, or ask me why do i care. If you can say nothing about solution, you can not help me.
The device is 2011 Xperia Pro (mk16i) and android version is 4.0.4
Thanks in advance !
Click to expand...
Click to collapse
Thank you for your reply !
There is a built in tool "Data Usage" in the settings. It shows the 4 applications that i use with internet + Direct Push that checks email from microsoft server + Android OS in the list as well. I guess all the stuff going on "behind my back" is packed into Android OS. What tool do you suggest ?
There is "restrict background data" option. But when i select it - i get the warning that some apps will not work unless connected to wifi. The last part of this warning indicates to me that Aroid Os will still send the data. But only when connected to wifi. And i dont want it ever to send any data. Why would any data be sent to google server ? I disabled all synchronisation with google ...
You could also use the tool network monitor https://play.google.com/store/apps/details?id=com.jmm.networkmonitor which wrote by my friend. It could find which application using your network. And could display the peer address.
I think some google application such as gtalk service are connecting google server background. No choice.
themima said:
Thank you for your reply !
There is a built in tool "Data Usage" in the settings. It shows the 4 applications that i use with internet + Direct Push that checks email from microsoft server + Android OS in the list as well. I guess all the stuff going on "behind my back" is packed into Android OS. What tool do you suggest ?
There is "restrict background data" option. But when i select it - i get the warning that some apps will not work unless connected to wifi. The last part of this warning indicates to me that Aroid Os will still send the data. But only when connected to wifi. And i dont want it ever to send any data. Why would any data be sent to google server ? I disabled all synchronisation with google ...
Click to expand...
Click to collapse
Xposed app firewall.
This app is an firewall for the installed apps. Only apps with permission "android.permission.INTERNET" are
shown. IPv4 and IPv6 are supported together with TCP and UDP. You could configure outgoing and incomming
connections independent from each other.
The rules could be applied for each network: W-Lan, local network, mobile, roaming, unknown.
Logging is configurable for incomming/outgoing and allowed/denied connections.
Colors:
Blue: Template is used.
Yellow: Custom settings.
Green: The app is trusted.
Red: The app is blocked.
Features:
No iptables required, the kernel doesn't need to support it.
The firewall is active when Android starts, no startup data leak.
The rules are always active, no re-apply on connection change is needed.
Limitiation:
Host names in the log file are PTR entries.
Works only for Android (Java), not the native (Linux) part
Donation:
No self-promotion in the app.
You could trust or block an app (Menu/ActionBar)
You could use a template for not configured apps
Additional (experimental) networks: Bluetooth, WiMAX, Ethernet
Tasker support, per App
You support this app and further development!
Permissions:
ACCESS_SUPERUSER: apply iptables rules
This app does not connect itself to any websites or hosts!
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Website: http://tinyurl.com/l5bpv23
Play Store: http://tinyurl.com/ome2pvc
Xposed Repository: http://tinyurl.com/ksc6plz
Changelog: http://tinyurl.com/n8gsqja
Why this app? No firewall for Xposed exists yet
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
Insane.. I was looking for something like this about 12 hours ago.. its almost like you read my mind and made it just for me!.
I like your style. Nice and simple and keeping it in line with your others.
Sent from my GT-I9300 using Tapatalk
Downloading now.
Sent from my SCH-I535 using XDA Premium 4 mobile app
shivadow said:
Insane.. I was looking for something like this about 12 hours ago.. its almost like you read my mind and made it just for me!.
I like your style. Nice and simple and keeping it in line with your others.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Maybe you head me thinking loud 6 weeks after starting this app: "i will release today, if there are still error, i'll fix them later"
Am I correct in assuming this is not open source?
I got a question about incoming/outgoing connections, maybe somone else want to know:
Incoming connections are used by less than 1% of all apps. This is used if the app is a "server", like BubbleUPnP. So most time incoming conections could be blocked, i think for mobile network 100%.
An outgoing connection is like a phone call: You call someone (outgoing connection), and can talk (send "data") and hear (receive "data")
Wifi Internet and Network:
If you want to control eg your local tv-receiver, xbmc device or avm router (with FreetzMobil), only connections to the local network are required. This prevents app to send data to the internet.
The "local network" are all "private" IPv4 and IPv6, they will not be forwarded by internet routers. Additionally, if you use "public" IPs they are local if it is in the same subnet as a ip of your device. Uncommon for IPv4 usage, but public IPv6 are the common usage (public IPv6 for every device)
an0n981 said:
Am I correct in assuming this is not open source?
Click to expand...
Click to collapse
As usual i send source only to people i know
I took this mod for a quick test drive, a little feedback:
-Is it not possible to restrict kernel?
-Could it be that apps that use native libraries to connect to the internet cannot be restricted? Firefox and Mega (both use native libraries) were able to connect even when completely restricted.
Also a little cosmetic issue com.android.process.gapps showed completely green at all times. However restrictions were applied properly
an0n981 said:
I took this mod for a quick test drive, a little feedback:
-Is it not possible to restrict kernel?
-Could it be that apps that use native libraries to connect to the internet cannot be restricted? Firefox and Mega (both use native libraries) were able to connect even when completely restricted.
Also a little cosmetic issue com.android.process.gapps showed completely green at all times. However restrictions were applied properly
Click to expand...
Click to collapse
Yes, see OP: "Limitiation: ... no native binaries." This is because the design of Xposed
Isn't it "com.google.process.gapps"? Onyl this one app has the wrong colors? Has it a green dot for "trusted app"? What did you configured for it?
Yes I meant com.google....
I set it from template to custom, blocked everything, however in the app overview it still showed as all green. When it was restricted GCM was blocked and the log showed blocked connections to mtalk.google.com:5228. Then I unrestricted outgoing mobile and wifi and GCM was available and the log correctly showed allowed connections but the colors in the app overview didn't change
Version 1.0.1 uploaded
- fix "incoming" thx @w0rinal
- also an error related to coloring, @an0n981 can you check if it fixes your problem? Toggling options could be required
defim said:
- also an error related to coloring, @an0n981 can you check if it fixes your problem? Toggling options could be required
Click to expand...
Click to collapse
Sorry the bug is still present
Also 1 more questions. Do you see any problem running this along side AFWall?
The bug affects any app that starts end ends with <>. <android.media> and <org.mozilla.firefox.sharedid> also always revert back to displaying completely green once the app is reloaded
an0n981 said:
Also 1 more questions. Do you see any problem running this along side AFWall?
Click to expand...
Click to collapse
No, should work without problems. The one created iptables rules other hooks the connection methods - if one fails, the other does it
an0n981 said:
The bug affects any app that starts end ends with <>. <android.media> and <org.mozilla.firefox.sharedid> also always revert back to displaying completely green once the app is reloaded
Click to expand...
Click to collapse
The "<>" entries are not real apps (.apks) with a package name, they are uids. At app start i load all installed apps with internet-permission and hide apps which are no more installed / have not any longer the permissions -> the uid items are not in the list of installed apps (obviously)
Will be fixed in next release
EDIT: Uploaded
This is awesome ?
A few questions:
- is there a way to edit template? I couldn't find it anywhere in settings- am I missing something?
- Can you add multiple selection? For example, someone has lots of apps and wants to block roaming to them etc. etc. without having to change it manually for each app.
- filtering or sorting apps? perhaps something simple like the way afwall , or a more thorough filter like XPrivacy has?
Sent from my Nexus 5 using Tapatalk
defim said:
The "<>" entries are not real apps (.apks) with a package name, they are uids. At app start i load all installed apps with internet-permission and hide apps which are no more installed / have not any longer the permissions -> the uid items are not in the list of installed apps (obviously)
Will be fixed in next release
EDIT: Uploaded
Click to expand...
Click to collapse
Confirmed fixed
jaibar said:
This is awesome ?
A few questions:
- is there a way to edit template? I couldn't find it anywhere in settings- am I missing something?
- Can you add multiple selection? For example, someone has lots of apps and wants to block roaming to them etc. etc. without having to change it manually for each app.
- filtering or sorting apps? perhaps something simple like the way afwall , or a more thorough filter like XPrivacy has?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The template is used for all "blue" apps, which where are not configured by user. Modifying template is part of the donator options (see OP).
Btw, next planned feature: detection of VPN connections
defim said:
The template is used for all "blue" apps, which where are not configured by user. Modifying template is part of the donator options (see OP).
Btw, next planned feature: detection of VPN connections
Click to expand...
Click to collapse
Nice feature !
I dry tested this app (i.e. not checked in the Xposed module on my device) and already saw that the VPN was missing. Now I use AFWall+ which is good and has more profiles. I block all Google apps with it with a 'limited internet' profile and every time I download something from Play, I load another profile which allows 'Google Play services' and 'Google Play store' internet connection and after download/update I revert to 'Limited internet'.
On my Mac I have 'Little Snitch' firewall which has the ability to let it prompt for certain apps which I don't want to be connected permanently (such as the Mac App Store), but only when I do e.g. an OSX update. In that case I let it prompt and say 'only this time'.
A similar approach on LightingWall should be very welcome. E.g. a notification that the Play store wants to connect with internet and when one wants to download / update an app, say 'only this time' and not permanently.
mermaidkiller said:
Nice feature !
I dry tested this app (i.e. not checked in the Xposed module on my device) and already saw that the VPN was missing. Now I use AFWall+ which is good and has more profiles. I block all Google apps with it with a 'limited internet' profile and every time I download something from Play, I load another profile which allows 'Google Play services' and 'Google Play store' internet connection and after download/update I revert to 'Limited internet'.
On my Mac I have 'Little Snitch' firewall which has the ability to let it prompt for certain apps which I don't want to be connected permanently (such as the Mac App Store), but only when I do e.g. an OSX update. In that case I let it prompt and say 'only this time'.
A similar approach on LightingWall should be very welcome. E.g. a notification that the Play store wants to connect with internet and when one wants to download / update an app, say 'only this time' and not permanently.
Click to expand...
Click to collapse
Xprivacy implements a similar thing, allowing the user to be informed when one of the restrictions are asking for access of that permission, including internet permissions(no distiction between lan or vpn), i would also welcome an on demand prompt feature for this app, its one faeture i wished afwall had, but believe it cant because of the nature of iptables i believe,
Saying that im also kinda worried that this might conflict, two apps essentially fighting for control to "pause" the system, hope im wrong, maybe if the two devs of the two respective apps co-orporated in implementation,it might be resolved, if there is an issue, i dont know........... but im getting ahead of myself here, defim has not even stated that he'll implement this, still, no harm in discussing possibilities, slim or not
@banderos101 @mermaidkillerIf you want to be informed if an app is allowed or denied to access some hosts, you could get it with Tasker. Just with a simple message box or more enhanced things Tasker can do. It should not be a problem using this app wiht Xprivacy, AFwal etc. If you block a connection with one app, it could be that the others can't see/log it. This depends on the order of the apps, An iptables firewall should be the last the connection is passing.
A per host filter is not planned, if you want to stop connection to some (tracking, malwar, adware) hosts a hosts file filter could be used, like my UnbelovedHosts
defim said:
As usual i send source only to people i know
Click to expand...
Click to collapse
Too big a risk to take for security software like this. Post your work up on Github under a reasonable license.
I'm not seeing a big advantage over the GPL AFWall+ anyway.
I have a Jelly Bean 4.1.2 based phone, specifically an LG Intuition VS-950, which I am using with the Page Plus standard plan. As the data rate of $0.10/mb on that plan is ridiculous I have it toggled off and use a Karma Go for mobile data access at a much better data rate. Unfortunately I recently encountered a case where an app or two ran through a lot of my prepaid data. I know one of the culprits and have removed it, but I would like to confirm I have the situation addressed and perhaps seek reimbursement.
If I go into Settings->Mobile Data I see the data usage history. I would like to be able to break this down a bit further, as I only use the Karma Go data part of the time. I would like to be able to isolate the data usage only to the Karma Go for the period of interest. Much of the time my phone is connected either to the office WiFi or a public hotspot, so only the usage while connected to the Karma Go is of interest to me. I have the MAC address of the Karma Go and the two SSIDs used with it, so as long as one of those is part of the data usage history I should be able to isolate it.
Is there an app out there that can do this for me? If not, can I use adb to pull the data of interest over to my laptop for further analysis?
Dave
No need for an app. In fact, the only way to edit and review your device history is through Google Settings. Open it and then select Personal Info & Privacy.
Any links tapped will take you to a browser. Sign in again if asked and edit from there. You can also instruct Google to stop or pause data collection across apps or just specific ones (like YouTube).
Sent from my m8 using Tapatalk
I attempted to follow your directions, but I can't say that I see a way to retrieve the usage data from 24 July to 4 August for further analysis from there. The data I am referring to is displayed graphically on the phone from its home screen when I hit Settings->Mobile Data and is titled "data usage cycle" at the top. In particular I need to isolate the portion of this underlying data that is associated with the MAC of my Karma Go WiFi mobile hot spot or one of its two SSIDs and the apps that were responsible for the usage. Ideally I would like to download this data to my laptop in a form that I could open as a spreadsheet for further analysis.
If this data is available online for download, as your post implies, I am afraid I would need more specific direction to be able to access it. Thanks in advance for any further clarification or information you can provide.
Dave
I did a little more searching and from what I can tell the data I am looking for is stored on my phone in /data/system/netstats/ and I downloaded the files in the directory to my laptop. The files are named dev.<startepoch>-<endepoch>, uid.<startepoch>-<endepoch>, uid_tag.<startepoch>-<endepoch> and xt.<startepoch>-<endepoch> respectively with the latest lacking the <endepoch> and are binary files of some sort. How can I work with these files to retrieve the data I am looking for.
Dave
I did yet a bit more searching and it appears that the data is in NetworkStatsCollection format. I found a link to the open source here:
https://android.googlesource.com/platform/frameworks/base/+/e098050/services/java/com/android/server/net/NetworkStatsCollection.java
How can I extract this data so that I can analyze it with other tools?
Dave
It appears that were the data I wanted logged since the last boot I could obtain it via:
adb shell dumpsys netstats detail
Unfortunately, the desired data is from a prior boot. Looking at /data/system/netstats/* shows the data is still present in an earlier file, so I would need to tell dumpsys what date range to extract. Unfortunately I don't have any documention on how to do so. Anyone know how to do so?
Dave