Hello peeps,
Experience music in Redmi note 9 pro (Curtana) like never before.
Checkout Following google drive link for Required file:
https://drive.google.com/file/d/1-Sps2NKscNr37FfrSehXkJJxbnUv-6Dc/view?usp=drivesdk
Below is the step to Install Dolby Successfully:
1. Flash AML via Magisk Module.
2. Flash SE Linux Permissive via Magisk Module.
3. Flash Dolby zip via Magisk Module.
Enjoy
#Peace
Thank you, when I have mine I will! Does the sound improve much?
Yuluga said:
Thank you, when I have mine I will! Does the sound improve much?
Click to expand...
Click to collapse
Far better than stock one.
rohit1990 said:
Hello peeps,
Experience music in Redmi note 9 pro (Curtana) like never before.
Checkout Following google drive link for Required file:
https://drive.google.com/file/d/1-Sps2NKscNr37FfrSehXkJJxbnUv-6Dc/view?usp=drivesdk
Below is the step to Install Dolby Successfully:
1. Flash AML via Magisk Module.
2. Flash SE Linux Permissive via Magisk Module.
3. Flash Dolby zip via Magisk Module.
Enjoy
#Peace
Click to expand...
Click to collapse
The AML I have installed without problems but the other 2 give me error of the zip when trying to install it from Magisk.
Hi, does this add stereo sound? So both speakers are used for sound?
Oh man! thanks for this amazing thread!!!
Any solution? "Remote service has stopped" after tapping on any mode(like music, film, game, etc). However, it work after restarting.
---------- Post added at 07:23 PM ---------- Previous post was at 07:20 PM ----------
SerioussS9899 said:
Any solution? "Remote service has stopped" after tapping on any mode(like music, film, game, etc). However, it work after restarting.
Click to expand...
Click to collapse
Effects* work after, but can't change mods without restarting.
Working great. Noticeable sound quality (and volume) improvement.
Hi
It's work with redmi note 9s global? or maybe this two have different in audio
the mod works great! Does it always start activated with the reboot of the mobile?
Dolby zip install failed on mine. It says it's not a Magisk module.
EDIT: Successfully installed but crashes. IDK but i think it has something to do with me using AOSP 10 GSI
i canot apply dollby sound please you can help me to open sounded dollby
jmesxrnld said:
Dolby zip install failed on mine. It says it's not a Magisk module.
EDIT: Successfully installed but crashes. IDK but i think it has something to do with me using AOSP 10 GSI
Click to expand...
Click to collapse
you need to unzip the file first because it contains 3 magisk file in there
I flashed them successfully but I cannot open dbplus app it keeps crashing.
Is it compatible in 9s?
Viper Sound is a lot better
Thank u Sir, Its far Better than Stock AOSP
it does sounds better using the phones speaker
any chance to get a stereo option?
Thank u Bro Finally installed Dolby
---------- Post added at 04:03 PM ---------- Previous post was at 04:00 PM ----------
Will Viper Works??
if yes how to install
same steps to install?
Can I instal this in nonrooted curtana using Twrp recovery??????
Related
All audio improvement tweaks for our one and only moto e 2nd gen at one place
How dude can u tell
i created this thread to know what everyone is using to enhance sound output and how those are working
i am using dolby atmos
sankhemka said:
i created this thread to know what everyone is using to enhance sound output and how those are working
i am using dolby atmos
Click to expand...
Click to collapse
I use ViPER4Android (I love the bass boost).
I use Viper Audio as well... and for profiles I use FS LiveBass HiFi, which is available on XDA.
yes i used viper4android too but it goes crazy sometimes it automatically increase and decrease sound but i think there was some problem with audio profile
sankhemka said:
yes i used viper4android too but it goes crazy sometimes it automatically increase and decrease sound but i think there was some problem with audio profile
Click to expand...
Click to collapse
I'm using the version which supports SeLinux Enforcing and am facing no such issue.
Sent from my XT1521 using XDA Labs
I use http://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516 + http://forum.xda-developers.com/android/software/mod-htc-beats-audio-beats-xperience-t3281603
Hey devs,
I also have to enhance my audio performance but i don't know how ?
I have a moto e2nd gen 3g XT1506 with CM 13.0 running .
I think Dolby atmos is best for audio performance enhancement but i don't know how to install dolby atmos in my phone .
Can anyone tell the complete instruction to install dolby atmos in my phone ?
SamdAbnormal said:
Hey devs,
I also have to enhance my audio performance but i don't know how ?
I have a moto e2nd gen 3g XT1506 with CM 13.0 running .
I think Dolby atmos is best for audio performance enhancement but i don't know how to install dolby atmos in my phone .
Can anyone tell the complete instruction to install dolby atmos in my phone ?
Click to expand...
Click to collapse
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
rootingguide said:
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
Click to expand...
Click to collapse
Can you send me the download link of dolby atmos supported for my device ?
---------- Post added at 08:35 AM ---------- Previous post was at 08:33 AM ----------
rootingguide said:
Just flash the zip and wipe cache. And don`t forget to have some recent backup in TWRP in case of something going wrong.
Click to expand...
Click to collapse
Also Can you send the instruction link for how to take complete backups and how to restore it if something goes wrong ?
SamdAbnormal said:
Can you send me the download link of dolby atmos supported for my device ?
---------- Post added at 08:35 AM ---------- Previous post was at 08:33 AM ----------
Also Can you send the instruction link for how to take complete backups and how to restore it if something goes wrong ?
Click to expand...
Click to collapse
1. Any Dloby Atmos for your Android version should work.
2. Search youtube about how to backup using TWRP or get some basic knowledge. I assume you don`t even have TWRP on your phone so i recommend you the latter if you want Dolby on your phone
rootingguide said:
1. Any Dloby Atmos for your Android version should work.
2. Search youtube about how to backup using TWRP or get some basic knowledge. I assume you don`t even have TWRP on your phone so i recommend you the latter if you want Dolby on your phone
Click to expand...
Click to collapse
When i rooted my phone i installed TWRP , I Will backup my phone using it..There are also several apps which help in backing up your phone .
Is TWRP the best or any other app for backing up ?
SamdAbnormal said:
When i rooted my phone i installed TWRP , I Will backup my phone using it..There are also several apps which help in backing up your phone .
Is TWRP the best or any other app for backing up ?
Click to expand...
Click to collapse
I use TWRP. it's perfect for me. I can switch ROMs without having to worry abt my data.
Sent from my Motorola XT1521 using XDA Labs
Hi all the expert here,
Actually i flashed my redmi note 3 kate with Lineage OS latest rom, i have search through all the web for the way to install dolby atmos into my rom, but all doesnt seem to work. First thing i try is, flash the dolbyatmos.zip with twrp, the application actually appear but there is no effect on the sound (Sorry for my broken english). Second is i try to flash The ARISE Sound mod, followed all the procedure but nothing works...
May i know who have the same ROM as me and also RMN3 kate or kenzo have successfully install the application? Can guide me? Or at least share me a link
Thanks alot and really appreciate for all the reply. (if have )
I you are a Magisk user for root, it's very easy to install Dolby mod with Magisk module
---------- Post added at 10:36 AM ---------- Previous post was at 10:33 AM ----------
After flashing Magisk, go to Magisk manager app → Downloads and select Dolby module. Install,activate and just reboot
Hi, thanks for the reply... I tried this method and this is what i get, already lastest version of magisk
https://goo.gl/photos/nZwvBtkx9z6RukVv8
I dirty flash the rom, and i manage to flash dolby, but same thing happen as i mention, got the application but no effect at all, i wonder is it somekind of permission thing?
Disable other audio mods such as audiofx.
Hope this helps !!
Don#t_forget said:
Disable other audio mods such as audiofx.
Hope this helps !!
Click to expand...
Click to collapse
I already did~ I did some small research bout this....But still cannot...
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Sadly doesn't work on PNW as of now.
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Please raise any issues in the thread linked in the OP, not here. Thanks.
LenAsh said:
Please raise any issues in the thread linked in the OP, not here. Thanks.
Click to expand...
Click to collapse
Sorry! It was already an issue I brought up with that port in that thread, I was just letting everyone know the experience from it and that it doesn't work for our phones yet.
Original thread states SDK 26 (Oreo) as a requirement.
The magisk Dolby axon 7 module is working fine on nougat
---------- Post added at 10:54 ---------- Previous post was at 10:27 ----------
Teet1 said:
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Click to expand...
Click to collapse
Can you test this for Oreo, I can't do because my wife's axon 7 needs to run stable on Los 14
https://forum.xda-developers.com/showpost.php?p=74943166&postcount=31837
Works on my mi a1 with Oreo.
You don't have to download to PC first, just mount system before flashing with twrp.
Thanks, I get work it with last version of PNW and Hellsgate kernel, making a clean install and installing supersu before, with magisk don't work for me.
May you have to use selinux permissive module for magisk.
please comment with Links and Instructions. thank you.
On Oreo V4A and Dolby working but not on Pie. At least not for me ?
V4A works on pie too. After installing it (via magisk) you have to use twrp, mount vendor, and navigate to vendor/lib/soundfx and vendor/lib64/soundfx and rename all the files there by adding something like .old after the .so file extension so the system doesn't recognize them. Users have reported problems after deleting them but with this way everything will work just fine. I'm using it on Los 16 without any problems.
AntwnhsAnt said:
V4A works on pie too. After installing it (via magisk) you have to use twrp, mount vendor, and navigate to vendor/lib/soundfx and vendor/lib64/soundfx and rename all the files there by adding something like .old after the .so file extension so the system doesn't recognize them. Users have reported problems after deleting them but with this way everything will work just fine. I'm using it on Los 16 without any problems.
Click to expand...
Click to collapse
Oh ok. I'm on OmniRom. I'm gonna try it out and give you feedback.
I better make a backup ofcourse?
Thanks alot mate
@AntwnhsAnt
Looks like its working ? did you download some IR files for better sound? I mean do you use them?
Thanks for perfect instructions ?
can viper4a give the same effects of dolby? i tried it before but it seemed kinda complicated for my usage ?
I'd like to know more about it though
nagoo1 said:
can viper4a give the same effects of dolby? i tried it before but it seemed kinda complicated for my usage ?
I'd like to know more about it though
Click to expand...
Click to collapse
Is Dolby working on Pie? Are you on Oreo?
nagoo1 said:
can viper4a give the same effects of dolby? i tried it before but it seemed kinda complicated for my usage
I'd like to know more about it though
Click to expand...
Click to collapse
Viper is considered to be the father of all sound mods if you know how to tune it correctly. Dolby is nothing infront of Viper FX (I can confirm as being in music industry for more than 10 years).
Rowdyy Ronnie said:
Viper is considered to be the father of all sound mods if you know how to tune it correctly. Dolby is nothing infront of Viper FX (I can confirm as being in music industry for more than 10 years).
Click to expand...
Click to collapse
Agree, I tried viper plus dolby few days ago when I was using miui global stable 10.0.6.0. It gave me louder sound even with volume 1 only, which is amazing. But there is something to sacrifice, which is the audio quality, especially headset.
No matter how I tune using viper4android, the sound quality still bad as long as dolby is turned on.
Knowing dolby wont work on pie, so I remove it before I dirty flash it. And ya, the sound quality is back and I am happy. :laugh:
thomas140 said:
Agree, I tried viper plus dolby few days ago when I was using miui global stable 10.0.6.0. It gave me louder sound even with volume 1 only, which is amazing. But there is something to sacrifice, which is the audio quality, especially headset.
No matter how I tune using viper4android, the sound quality still bad as long as dolby is turned on.
Knowing dolby wont work on pie, so I remove it before I dirty flash it. And ya, the sound quality is back and I am happy. :laugh:
Click to expand...
Click to collapse
Well, I used to combine Viper+Dolby (only for Surround effect) and the output was amazing. But since Dolby isn't available for Pie as of now, Viper is the only option (probably Ainur Souran works. Didn't try on Pie).
Rowdyy Ronnie said:
Viper is considered to be the father of all sound mods if you know how to tune it correctly. Dolby is nothing infront of Viper FX (I can confirm as being in music industry for more than 10 years).
Click to expand...
Click to collapse
Ive been in The industri för 10 days and I agree
---------- Post added at 10:11 AM ---------- Previous post was at 10:05 AM ----------
Rowdyy Ronnie said:
Well, I used to combine Viper+Dolby (only for Surround effect) and the output was amazing. But since Dolby isn't available for Pie as of now, Viper is the only option (probably Ainur Souran works. Didn't try on Pie).
Click to expand...
Click to collapse
Im running Dolby Digital Plus and VIPER OM Pie.
https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
Also AINUR sauron magisk works. So its them im running...
maaakn said:
Ive been in The industri för 10 days and I agree
---------- Post added at 10:11 AM ---------- Previous post was at 10:05 AM ----------
Im running Dolby Digital Plus and VIPER OM Pie.
https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
Also AINUR sauron magisk works. So its them im running...
Click to expand...
Click to collapse
Can you give me a correct download for a Module witch is works for Pie OmniRom Pocophone please?
I tried the modules flashing with Magisk or TWRP but only got FC and crashesr from the apps afterwards.
Thank you for your efforts.
thechosenone43 said:
Can you give me a correct download for a Module witch is works for Pie OmniRom Pocophone please?
I tried the modules flashing with Magisk or TWRP but only got FC and crashesr from the apps afterwards.
Thank you for your efforts.
Click to expand...
Click to collapse
Sure, Ken.
I hope my love repey doesnt get angry :/
He is a hero
MAGISK - Audio Mod Lib. SELinux permessive (spell?)
Info for all ...not you only
maaakn said:
Sure, Ken.
I hope my love repey doesnt get angry :/
He is a hero
MAGISK - Audio Mod Lib. SELinux permessive (spell?)
Info for all ...not you only
Click to expand...
Click to collapse
Flashing zip with Magisk or TWRP?
thechosenone43 said:
Flashing zip with Magisk or TWRP?
Click to expand...
Click to collapse
Magisk.. All but dolby is there. Just download from King @repey6 and his thread..
From scratch: Magisk.. Install Viper. INSTALL Ainur. Install Dolby Digital. Last Audio mod liv and Audio Patch. REBOOT ) forgot that dolby only runs IF SeLinux is permessive.. Uploaded it.. You start it afterr boot
---------- Post added at 06:47 AM ---------- Previous post was at 06:36 AM ----------
thechosenone43 said:
Can you give me a correct download for a Module witch is works for Pie OmniRom Pocophone please?
I tried the modules flashing with Magisk or TWRP but only got FC and crashesr from the apps afterwards.
Thank you for your efforts.
Click to expand...
Click to collapse
_MM-P_Dolby_Digital_Plus-ARISE_edit_by_repey6-20181119. Zip
YOU Must activate SeLinux permessive.. Attachdd file
Some post down
maaakn said:
Magisk.. All but dolby is there. Just download from King @repey6 and his thread..
From scratch: Magisk.. Install Viper. INSTALL Ainur. Install Dolby Digital. Last Audio mod liv and Audio Patch. REBOOT ) forgot that dolby only runs IF SeLinux is permessive.. Uploaded it.. You start it afterr boot
---------- Post added at 06:47 AM ---------- Previous post was at 06:36 AM ----------
_MM-P_Dolby_Digital_Plus-ARISE_edit_by_repey6-20181119. Zip
YOU Must activate SeLinux permessive.. Attachdd file
Some post down[/QUOTE
Im sorry Mate. Its getting a bit confusing for me cuz to many possibilities to flash this or that either on Oreo or Pie.. with Selinux switcher or without.. flashing through magsik or TWRP..lol sorry can somebody post links for a workings soundmode and instructions to flash because my Dolby just FC even flashing Selinux switcher.
I'm on Pie OmniRom Device is Pocophone F1.
Please somebody make it simple as possible. Thanks
Click to expand...
Click to collapse
thechosenone43 said:
maaakn said:
Magisk.. All but dolby is there. Just download from King @repey6 and his thread..
From scratch: Magisk.. Install Viper. INSTALL Ainur. Install Dolby Digital. Last Audio mod liv and Audio Patch. REBOOT ) forgot that dolby only runs IF SeLinux is permessive.. Uploaded it.. You start it afterr boot
---------- Post added at 06:47 AM ---------- Previous post was at 06:36 AM ----------
_MM-P_Dolby_Digital_Plus-ARISE_edit_by_repey6-20181119. Zip
YOU Must activate SeLinux permessive.. Attachdd file
Some post down[/QUOTE
Im sorry Mate. Its getting a bit confusing for me cuz to many possibilities to flash this or that either on Oreo or Pie.. with Selinux switcher or without.. flashing through magsik or TWRP..lol sorry can somebody post links for a workings soundmode and instructions to flash because my Dolby just FC even flashing Selinux switcher.
I'm on Pie OmniRom Device is Pocophone F1.
Please somebody make it simple as possible. Thanks
Click to expand...
Click to collapse
Okay. Cant explain it easier.. Hopefully you work it out
Click to expand...
Click to collapse
maaakn said:
thechosenone43 said:
Okay. Cant explain it easier.. Hopefully you work it out
Click to expand...
Click to collapse
I worked it out ?? I deactivated, V4A and Audio Modification Library, set Selinux to permissive and suddenly it worked.
I don't know why but for me that way leads to the possive end ?
Click to expand...
Click to collapse
what about installing a mod on last pie beta? what is your advice? I installed Dolby but is not working
l0ll15 said:
what about installing a mod on last pie beta? what is your advice? I installed Dolby but is not working
Click to expand...
Click to collapse
I'm on latest LOS 16 and I installed V4A with Magisk. Works great.
V4A
Hey, I've found a man who made buffer fix for Mi 8 SE in a form of TWRP flashable zip, Magisk module and patched lib.
It will fix lagging viewfinder in GCAM
You have three options to install it:
1) Boot into TWRP, flash zip.
2) Flash zip in magisk
3) replace patched lib in vendor/lib/hw
Sources:
https://gist.github.com/HighwayStar/3da60a36395fa992cf4afc9f01449203
Credits:
@highwaystar_ru
link not working
Abdullah Niloy said:
link not working
Click to expand...
Click to collapse
Updated just now
I've flashed the first one in twrp and the lag in the viewfinder is still there. This is my procedure:
1. Install Gcam 7.4.104 by Parrot
2. Flash using twrp
Can you suggest any gcam. Previously I was using Gcam 6.2. it's not lagging at all but whenever I clicked the picture taken within the gcam, it says hdr processing but whenever I open it manually in the gallery, it's just fine. The image was already processed.
Edit. Flashing thru magisk works! Tnx
Nice find! Looks exactly as https://gist.github.com/HighwayStar/3da60a36395fa992cf4afc9f01449203 published 2 hours earlier,
PS: first post links updated
Thanks man, had been waiting for this for pretty long time.
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
highwaystar_ru said:
Nice find! Looks exactly as https://gist.github.com/HighwayStar/3da60a36395fa992cf4afc9f01449203 published 2 hours earlier,
PS: first post links updated
Click to expand...
Click to collapse
You're awesome
It works amazing.?
God bless you.
Trojan00 said:
I've flashed the first one in twrp and the lag in the viewfinder is still there. This is my procedure:
1. Install Gcam 7.4.104 by Parrot
2. Flash using twrp
Can you suggest any gcam. Previously I was using Gcam 6.2. it's not lagging at all but whenever I clicked the picture taken within the gcam, it says hdr processing but whenever I open it manually in the gallery, it's just fine. The image was already processed.
Edit. Flashing thru magisk works! Tnx
Click to expand...
Click to collapse
do you still using the gcam 7.4 by parrot after flashing? if not, what version & modder do you used?
Yeetwoot said:
do you still using the gcam 7.4 by parrot after flashing? if not, what version & modder do you used?
Click to expand...
Click to collapse
Yup I'm still using his work. Exact version is Version 7.4.104.314953318