I need help urgently. I have a p20 lite ane-lx2 that had an update and got bricked. I tried the dload methot on my SD card but no luck keeps on telling me fail to do update. I have tried all the stuff on this forum with no sucsess.. Please please help my battery also does not charge the phone anymore since this happen.. I have read some stuff around that it can be done by adb tool. But I'm a noob.. I please need help I have taken it in to suppliers but they say they can't do anything.. I can boot up into download mode but goed to 5 persent then reboots.. Can go to recovery mode byt phone and frp is locked. And if I boot normally it just gets stuck to system apdate fail and error codes.. Please help
This answer have 2 solutions
1 st solution - using SP flash tool
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
flash stock ROM via SP flash tool
https://flashingguide.com/huawei/how-to-flash-huawei-p20-lite/
---------------------------------------------------------------------------
2 nd solution - using fastboot (adb, terminal, manual, harder, but less likely can go wrong if you follow steps)
https://unofficialtwrp.com/huawei-p20-lite-root-twrp/
just skip step of rooting.
but you need unlocked bootloader:
https://unofficialtwrp.com/how-to-unlock-bootloader-on-huawei-phone-2019-working/
when you flash twrp you need to flash stock ROM via TWRP recovery
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
open TWRP recovery and transfer downloaded stock ROM in phone and flash via TWRP
https://www.theandroidsoul.com/how-to-install-a-custom-rom-using-twrp-recovery/
and it should do just fine
--------------------
sorry if answer look too hard to understand, just follow instructions on links and my answer how to do it, and it will work
Related
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
Hi my friends.
this is my story :
my phone is Redmi note 3 pro (qualqomm)
I got permissions for unlocking a week ago.
then i tried xiaomi website unlock method but it stopped at 50% and gave me couldn't verify device (different account) error.
my rom is global (MIUI 8) . then i tried to flash dev rom with updater app but it gave me couldn't verify update package error. i cleared updater data and tried again but same error.
in next step i tried mi pc suite to flash but no success.
then i used fastboot mode and mi flash and i got locked bootloader error.
then i used EDL mode to flash but in mi flash i got hello package error. (object reference not set to an instance of an object)
i completely confused . i tried all methods and read many fix like login in i.mi.com and other method that people fixed their problem but all of them not fix mine.
i read some threads about flashing twrp and root without unlocking bootloader but all of them need flashing dev rom and i can't flash.
can anyone help me?
x23are said:
Hi my friends.
this is my story :
my phone is Redmi note 3 pro (qualqomm)
I got permissions for unlocking a week ago.
then i tried xiaomi website unlock method but it stopped at 50% and gave me couldn't verify device (different account) error.
my rom is global (MIUI 8) . then i tried to flash dev rom with updater app but it gave me couldn't verify update package error. i cleared updater data and tried again but same error.
in next step i tried mi pc suite to flash but no success.
then i used fastboot mode and mi flash and i got locked bootloader error.
then i used EDL mode to flash but in mi flash i got hello package error. (object reference not set to an instance of an object)
i completely confused . i tried all methods and read many fix like login in i.mi.com and other method that people fixed their problem but all of them not fix mine.
i read some threads about flashing twrp and root without unlocking bootloader but all of them need flashing dev rom and i can't flash.
can anyone help me?
Click to expand...
Click to collapse
I just recently went through most of what you have gone through... Be patient though... It seems that the unlocking of bootloader even after you getting permission, takes atleast 2-3 weeks more.
- You can flash the miui global dev rom, you may download it from the miui forums... Here is the link for the fastboot rom http://en.miui.com/a-234.html.
- To flash the dev rom, you need to ensure you put your phone into fastboot, ensure all the fastboot drivers are installed on your computer
- Also, you need to ensure that you download the GLOBAL/DEV FASTBOOT ROM(this is different than the regular zip package) that you download.
- Then you can follow the instructions to install the ROM using miflash tool
- If the ROM installation is a success, then you just need to wait patiently atleast for 15-20 days from the time you got unlock permission sms from MI
- Then try running the flash unlock tool, it should get unlocked.
- Now flashing TWRP might be tricky, I was able to flash the official TWRP, but had issues where the internal memory wasn't getting mounted, because you keep getting asked for decryption password in TWRP to mount the data, no matter what you enter, it might not work
- After trying many TWRP types, the one that worked was "zcx twrp"
- Once you flash that, you should be able to flash any custom or miui roms you need :good:
GENiU5 said:
I just recently went through most of what you have gone through... Be patient though... It seems that the unlocking of bootloader even after you getting permission, takes atleast 2-3 weeks more.
- You can flash the miui global dev rom, you may download it from the miui forums... Here is the link for the fastboot rom http://en.miui.com/a-234.html.
- To flash the dev rom, you need to ensure you put your phone into fastboot, ensure all the fastboot drivers are installed on your computer
- Also, you need to ensure that you download the GLOBAL/DEV FASTBOOT ROM(this is different than the regular zip package) that you download.
- Then you can follow the instructions to install the ROM using miflash tool
- If the ROM installation is a success, then you just need to wait patiently atleast for 15-20 days from the time you got unlock permission sms from MI
- Then try running the flash unlock tool, it should get unlocked.
- Now flashing TWRP might be tricky, I was able to flash the official TWRP, but had issues where the internal memory wasn't getting mounted, because you keep getting asked for decryption password in TWRP to mount the data, no matter what you enter, it might not work
- After trying many TWRP types, the one that worked was "zcx twrp"
- Once you flash that, you should be able to flash any custom or miui roms you need :good:
Click to expand...
Click to collapse
tnx for reply but my problem is i cant flash.
my bootloader is locked and i cant flash fastboot rom.
therefor i must use edl mode or updater app but both of them don't work as a said in first post.
You don't need an unlocked BL to flash official fast boot miui ROMs
GENiU5 said:
You don't need an unlocked BL to flash official fast boot miui ROMs
Click to expand...
Click to collapse
mi flash show me : bootloader unlock in flashing process
x23are said:
mi flash show me : bootloader unlock in flashing process
Click to expand...
Click to collapse
You may try the steps on this link http://en.miui.com/thread-235865-1-1.html
Skip the EDL thing and go directly to the part where they explain how to use the miflash tool to flash a fastboot ROM
I should have asked this first... what's the state of your phone right now? Does it boot, stuck on boot loop, or are you able to boot into some ROM.
maybe u have a vendors rom, flash the fastboot rom using edl
finally a downloaded adb 1.4.3 and installed it and i flashed dev rom in EDL mode.
but now i have some questions:
can i change kernel with locked bootloader?
if i change kernel does fingerprint work?
You just dont have proper drivers installed im 100% sure, else it would go via edl
Hehe was right������
And why dont you ask for official unlock approval? Its approved in less than a day, anyone saying otherwise have old news
Or you can always use a method in this forum...
Hi guys, i have a big problem. I tried to update my girlfriend's phone (huawei g play mini chc-u01). I read some guides and i downloaded all firmwares from huawei site, unlock bootloader and tried to install updates. But at some point, phone won't boot up ! I made a mistake ! Now the situation is that when i turn on the phone, it shows the honor logo. I tried to flash via fastboot the system, recovery and boot image that i extracted from UPDATE.APP of the firmware taken from huawei site. Also tried to flash twrp recovery and find out a way to unbrick phone, but nothing. I can't find anything that works. An other thing is that in fastboot mode, when i type some erase command, output is remote command not allowed, but flash command seems to work.
How can i restore phone ? Is not there a way to restore it, I can make a aspo or cm based rom from system.img and other stock stuff ? Just split image to see files inside.
The last thing and maybe the core of mistake. I flash via twrp an oem file and then honor logo is appeared.
Thanks at all guys !
Edit: I finally restored phone. it works again flashing its lollipop version firmware.
bob1791 said:
Hi guys, i have a big problem. I tried to update my girlfriend's phone (huawei g play mini chc-u01). I read some guides and i downloaded all firmwares from huawei site, unlock bootloader and tried to install updates. But at some point, phone won't boot up ! I made a mistake ! Now the situation is that when i turn on the phone, it shows the honor logo. I tried to flash via fastboot the system, recovery and boot image that i extracted from UPDATE.APP of the firmware taken from huawei site. Also tried to flash twrp recovery and find out a way to unbrick phone, but nothing. I can't find anything that works. An other thing is that in fastboot mode, when i type some erase command, output is remote command not allowed, but flash command seems to work.
How can i restore phone ? Is not there a way to restore it, I can make a aspo or cm based rom from system.img and other stock stuff ? Just split image to see files inside.
The last thing and maybe the core of mistake. I flash via twrp an oem file and then honor logo is appeared.
Thanks at all guys !
Edit: I finally restored phone. it works again flashing its lollipop version firmware.
Click to expand...
Click to collapse
how did you restore your phone ?
I have a g play mini chc-u01 and I upgraded it directly from android 4.4.2 (c185b067 ) to 6.0 (c185b560 ) but this build has many issues. now I want to downgrade to lollipop but I can't get into the recovery mode. whenever I try to enter the recovery mode, the bootloop happens. I tried to flash the system recovery extracted from UPDATE.APP but it didn't work neither did twrp. so can you show me the steps you made to restore your phone ??
Same Problem here. can you share how you fixed it?
Hello fellow xda members helpers and developers
I need to downgrade my Phone from Android 7 Build: C432B370 to Android 6
What do I need to make sure of in my Huawei P9 Lite Android 7 Emui 5 before following the Rollback/software upgrade procedure described in the respective Zip files.
Do I need to unroot and relock ? .. If yes which version of recovery or TWRP do I need.. if I am going to rollback.
I am a little hesitant at the moment becouse I managed to get into a bootloop yesterday by just flashing recovery_stock .
I am guessing it is becouse I unawarely flashed the wrong recovery_stock(?)
Recovery/Fastboot mode were not availiable - and then tried to flash the rollback via 3 button method.. which of course did not work.
( In case you are wondering how I managed to fix this: I let the battery drain to 0% - this broke the loop - afte the fifth try I managed to reset it with volume up + power all the way through booting)
So now I am back to square one..
Thank you
ok so I managed to fix this by myself: The problem I had was, I had a corrupted/wrong recovery on my Android 7.
So what I did was, I checked which build I excactly had .. in my case C432B370 ... downloaded the full rom. Extracted the stock recovery.img with "HuaweiUpdateExtractor" and flashed it.
Then I did the normal rollback procedure with both update.app files.
Had to unlock and root it once more... ( this time with the correct twrp) and voila it works.
So what do we learn?: dont trust simple internet guides if they not offer informations on file versions they offer ... they may not use the correct versions for your phone.
thrad can be closed or deleted
thanks for looking
Hello,
I have GEOTEL G1 "Terminator" phone
I tryed different methods to root the phone
I tryed 1 click root apps but nothing, i tryed the same apps in pc version but nothing
I cant find twrp / cwm for this phone
I read about making twrp / cwm from the base recovery.img + scatter file, but i have no idea
If you need details, files, etc tell me
A lot of thanks!!
Sorry my bad english...
rolexio888 said:
Hello,
I have GEOTEL G1 "Terminator" phone
I tryed different methods to root the phone
I tryed 1 click root apps but nothing, i tryed the same apps in pc version but nothing
I cant find twrp / cwm for this phone
I read about making twrp / cwm from the base recovery.img + scatter file, but i have no idea
If you need details, files, etc tell me
A lot of thanks!!
Sorry my bad english...
Click to expand...
Click to collapse
I auto-reply me xD
I was trying adb&fastboot methods
1. Bootloader unlock (fastboot oem unlock) ---> this works and bootloader was unlocked
2. Flash recovery from other phones with the same SOC (Mediatek MT6580A) ---> i still with stock recovery, nothing happens. I tried fastboot boot recovery.img and fastboot flash recovery recovery.img
Any suggestion is welcome
install magisk manager to your phone, download firmware and extract boot.img from it.
patch boot.img with magisk manager, the new patched_boot.img has to be flashed to the phone with sp flash tools in "download mode".
Mine is rooted with this method, but I didn't manage to build twrp for this device.
HI , I have a question about this phone ,
its have led indicator ?
if You miss a call , msg , email etc... led is blinking ?