Hello everybody,
first i have a smart watch Amazfit pace i tried to do a reset factory. my watch don't load up.
after i tried to do a reset by command line :
- fastboot erase cache
- fastboot erase data
nothing is changed
but i procede with the flash:
i get this message : Error 3.2.6.0 Firmware version not detected
by using OTA_3.2.7.0
i need help with flashing my watch
please
Related
Hello,
I bought an Amazfit Stratos (A1619) and when I turned on, it asked to update to the latest version. I agreed and the watched seemed to be working fine, but after a couple of after, the watch started to not respond well to the commands, so I tried to restart it and then the watch was bricked, stucked in the amazfit logo.
I follow the first tutorial I found, for the Pace watch and it seemed to work, the watch went to the QR code phase, but I realized I installed the Pace firmware, so I redid the process again using the stratos file, but when I put the stratos file, the watch got stuck again in the amazfit logo.
I tried a couple of available firmwares (US stock firmware, firmware 2.3.7, Stratosfied), all without success. For the Stratosfied firmware, the watch starts the update, but it stops at around 75% and it does not go further.
Have anyone run in the same trouble? Any advice on how to unbrick this watch?
Probably it has a damaged internal storage (eMMC), hardly you can fix it by installing any firmware, but maybe one of them, specially an old one, can be installed completely so the watch boots at least.
If you know how to flash from fastboot mode, you can do a full wipe (erase everything on watch, including system partition), using the commands bellow while in fastboot mode.
PS: only do this if you know what you are doing and if you know how to flash a firmware from fastboot manually or using some installer, otherwise the watch won't turn on anymore!
Code:
fastboot erase data
fastboot erase cache
fastboot erase userdata
fastboot erase system
Then try to flash an old firmware and do NOT upgrade if it works.
you can't install system on locked bootloader and if you erase it somehow the watch will not boot .
Only first three comands are available on locked BL
Check this:
https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
I was using AOSPE rom and got new email id from office while adding new email got error saying can not add this email id without encrypting the device. For 3 hrs, it was stuck on 100% then the battery died I turn on the device again and promote screen for the password I didn't know which one to enter so I enter Gmail password. 'Encrypting unsuccessful Password is correct but data is corrupt reset phone to decrypt device' there was no any other options so I proceed like this
1) factory reset -> yes -> swipe
2) advance wipe /system /data /data/media /cache etc.
2) flash last rom I was using(AEX)
3) flash gapps
4) reboot the device.
after a reboot on the setup device screen, com.android.phone and google services framework stop working continuously so from step 2 I tried RR rom but no luck :crying: then flash stock rom and reboot device got in a boot loop :crying::crying: so holding vol. down and power button I am able to enter in bootloader screen but as I enter in recovery mode getting no command screen and adb not detecting the device.
what should I do? how can I get recovery mode back? teamwin or any other?
Hi , if your are able to boot into bootloader , just plug your device and write :
fastboot device
(just to make sure that your device is detected)
Now , from your stock firmware extract just recovery.img and put inside minimal adb & fastboot folder
now open terminal and write :
fastboot flash recovery recovery.img
(in order to flash back your stock recovery)
now write fastboot reboot
More explained you have here:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
stock firmware:
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
XT1550 (Dual-SIM)
Good luck
Hello
While using the tablet, several errors were displayed continuously on the screen. I do not remember exactly what the text of the errors was.
The error was almost identical to the name of the system files that had a problem with them.
Clicking on each error quickly displayed the next error. As long as the system hangs up, I have to reset the tablet.
When the tablet was reset, the system did not go up and it was constantly reset. After 3 or 4 times the reset enters the Recovery Mode.
The following errors are displayed in the Recovery Mode:
Mount Cache (Invalid Argument)
I run the Wipe Cache Partition and the problem did not fix.
I did Factory Reset, but it was not successful.
I installed the Phone Flash Tool and used the following rom:
http://gsm-firmware.com/index.php?a=downloads&b=file&id=20427
But when it comes to executing the "oem start_partitioning" command, it timeout. The device will reset and the error will be displayed below:
EFILINUX ERROR [start_boot_logic: 431] No valid target found. Fallbacking to MDS.
So i tried to follow the strategy written here:
https://forums.lenovo.com/t5/Lenovo...ollipop-5-0/m-p/2204562/highlight/true#M27284
I downloaded the IntelAndroid-FBRL-07-24-2015 program and I run Part 2 / T4.
I have downloaded the TWRP backup file but I do not know what should I install.
So if the solution outlined above is correct, help me do the rest. If I have to do something else, I'd be happy to guide me.
No one can help me?
Hello.
I have Amazfit Pace A1612 on stock old firmware 1.3.4f with a broken button. I'd like to update firmware, but I can't do it due to really weird software issues. The list of the problems includes:
Can't boot into Fastboot mode - the watch just reboots normally after 'adb shell reboot bootloader' command;
Can't make Factory Reset - the watch just reboots normally;
Can't update - the watch checks for a new firmware version, says that 1.3.8a is available, then I can confirm updating, but after downloading and rebooting nothing changes - just an old firmware. I can tap Update button again and repeat the whole process, but everything remains the same.
At the same time everything else works just fine: all functions work, GPS works, PC recognizes it as Amazfit Pace external storage device, adb works in 'device' mode (install and uninstall commands work), I can connect and sync it with Amazfit app.
So, is it possible to do something without a working button? I would really like to get rid of all those issues.
Systematis said:
Hello.
I have Amazfit Pace A1612 on stock old firmware 1.3.4f with a broken button. I'd like to update firmware, but I can't do it due to really weird software issues. The list of the problems includes:
Can't boot into Fastboot mode - the watch just reboots normally after 'adb shell reboot bootloader' command;
Can't make Factory Reset - the watch just reboots normally;
Can't update - the watch checks for a new firmware version, says that 1.3.8a is available, then I can confirm updating, but after downloading and rebooting nothing changes - just an old firmware. I can tap Update button again and repeat the whole process, but everything remains the same.
At the same time everything else works just fine: all functions work, GPS works, PC recognizes it as Amazfit Pace external storage device, adb works in 'device' mode (install and uninstall commands work), I can connect and sync it with Amazfit app.
So, is it possible to do something without a working button? I would really like to get rid of all those issues.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!sp4lxQIA!2Z4iSxLPEb1AXcOVXh12VrfXRFbbqc1GaPniqaWsXoU
It's an official update from Huami.
Saratoga79 said:
It's an official update from Huami.
Click to expand...
Click to collapse
I've just tried it, but without success. I assume it's a wrapper for adb commands, so the watch simply reboots after executing option 1 or 2. Option 4 successfully collects and pulls log files.
Code:
Please select[1/2/3/4], press enter to continue:
1
start to upgrade
***************************************************************
* 1.Please make sure that update.zip is in the current folder *
* 1.Please make sure the watch is connected to adb *
***************************************************************
Send update.zip to watch, please wait...
1999 KB/s (213515625 bytes in 104.275s)
Start to upgrade..
Systematis said:
Hello.
I have Amazfit Pace A1612 on stock old firmware 1.3.4f with a broken button. I'd like to update firmware, but I can't do it due to really weird software issues. The list of the problems includes:
Can't boot into Fastboot mode - the watch just reboots normally after 'adb shell reboot bootloader' command;
Can't make Factory Reset - the watch just reboots normally;
Can't update - the watch checks for a new firmware version, says that 1.3.8a is available, then I can confirm updating, but after downloading and rebooting nothing changes - just an old firmware. I can tap Update button again and repeat the whole process, but everything remains the same.
.
Click to expand...
Click to collapse
Your problem is Power buttons do not work.
It is a hardware problem.
Caused by the button has moisture.
I have encountered this problem before.
Can we factory reset amazfit Pace from Fast Bootloader via ADB Command Prompt?
guhan1995viswa said:
Can we factory reset amazfit Pace from Fast Bootloader via ADB Command Prompt?
Click to expand...
Click to collapse
Unlock Bootloader then using command via Fastboot Mode.
fastboot erase cache
fastboot erase data
any solutions?
Systematis said:
Hello.
I have Amazfit Pace A1612 on stock old firmware 1.3.4f with a broken button. I'd like to update firmware, but I can't do it due to really weird software issues. The list of the problems includes:
Can't boot into Fastboot mode - the watch just reboots normally after 'adb shell reboot bootloader' command;
Can't make Factory Reset - the watch just reboots normally;
Can't update - the watch checks for a new firmware version, says that 1.3.8a is available, then I can confirm updating, but after downloading and rebooting nothing changes - just an old firmware. I can tap Update button again and repeat the whole process, but everything remains the same.
At the same time everything else works just fine: all functions work, GPS works, PC recognizes it as Amazfit Pace external storage device, adb works in 'device' mode (install and uninstall commands work), I can connect and sync it with Amazfit app.
So, is it possible to do something without a working button? I would really like to get rid of all those issues.
Click to expand...
Click to collapse
i have the same problem with you.
have you got any solutions for this problem?
Hello folks, so my TX5 PRO with the S905X2 boots into Recovery mode automatically everytime you reboot it, no way out.
Can't leave, rebooting only results in re-entering the recovery mode. No error messages, only "supported api: 3" is shown.
Generally, you can boot, but it's like a 1:100 chance to boot it, it randomly boots, and when it does - it works just fine as usually, but next reboot results in going to recovery mode again.
Tried re-flashing the firmware with the factory original system, with amlogic USB burning tool, installation went fine, without any errors. But still can't boot into the system.
The rom is found here: https://chinagadgetsreviews.com/download-android-8-1-stock-firmware-for-tanix-tx5-pro-tv-box.html and looking at the CPUID CPU-Z program, the ROMs are 100% the same, from name, to build time and last update date etc. so it should be fine
Amlogic usb burning settings were: Erase flash (normal erase) and Erase bootloader were selected.
Anything I can do? Thanks in advance!