I'm trying to find other game controllers that connects to the razer 1/2 and google pixel 3a xl through it's usb c port just like the kishi and gamevice but a little cheaper than $60. I also want to know, if it came down to it, which gamevice fits the razer phones. I know they have one for the pixels but I'm not sure if that'll fit the razer phones as well.
Just to be clear, I'm not looking for a bluetooth controller like the junglecat or a console controller with a phone mount. I'm looking for a controller that fits on the phone's ends and connects to the usb c port just like the kishi and the gamevice.
Related
I need a long HDMI cable to connect to my TV from my sofa. I found this one on Amazon with good reviews. However, the black plastic part of the microHDMI plug looks quite bulky and I'm wondering if I can plug it into the Primes socket. Anyone had any experience with such plugs?
Yeah, that will work fine. The plastic part never actually goes into the Prime, only the metal tip.
Sent from my SCH-I500 using XDA
I bought the micro HDMI adapter on amazon that is listed in the Ultimate Accessory Guide post:
http://www.amazon.com/gp/product/B004C4SHQY/ref=oh_o04_s00_i00_details
And then bought a 15' HDMI cable for $0.81 from Amazon as well. I prefer the adapter approach as this way I won't have a really long HDMI cable that I can only use with my Prime.
So I use a pair of Audio Technica ATH-M50 headphones, I have the Spigen Slim Armor Case and it's headphone port is far too small for the headphone's to be connected.
I'm looking to buy this because retailers like Raidoshack don't have anything similar.
I was wondering if anyone had the same issue and what their solution was.
Hero746 said:
So I use a pair of Audio Technica ATH-M50 headphones, I have the Spigen Slim Armor Case and it's headphone port is far too small for the headphone's to be connected.
I'm looking to buy this because retailers like Raidoshack don't have anything similar.
I was wondering if anyone had the same issue and what their solution was.
Click to expand...
Click to collapse
You have three choices, as far as I can see.
1 Different wired headphones
2 Bluetooth wireless headphones
3 Use the Micro USB output instead.
I have used method 3 successfully. I bought a Micro USB OTG cable, a USB DAC and a headphone amplifier.
The USB DAC was the UD110 http://stoneracoustics.blogspot.co.uk/, now in a version 2 and the amplifier was a Fiio E5 http://www.amazon.co.uk/FiiO-E5-BK-E05-Headphone-Amplifier/dp/B0026RJQJ6, now superseded, but there is plenty of choice on those depending on budget. The OTG was a £2 Hong Kong ebay special.
There are combo DAC and amplifier devices, such as Fiio's E07K http://www.fiio.com.cn/products/index.aspx?ID=100000012071912&MenuID=105026002 that look like they'd do the trick and be a more elegant solution than mine.
Err... make that four options;
4) drill out headphone jack hole in case to fit the jack!
Get a adapter off ebay or in best buy an extension.
Sent from my SM-N900T using Tapatalk
Hi, seen a few posts of people modding cases, does this mean the brodit op3 active car charger will work or are any desk top stands specifically for 3 and 3t compatible please?
I've seen people 3d print specific desk mounts for devices before. Might be something to look into if there is a 3d printer place near you or if you own one? They looked awesome!
shane21075 said:
Hi, seen a few posts of people modding cases, does this mean the brodit op3 active car charger will work or are any desk top stands specifically for 3 and 3t compatible please?
Click to expand...
Click to collapse
I'm wondering about this too - specifically the brodit active car holders. Have the dimensions changed at all with regards to charging in a cradle?
I've been using the kidigi desktop charger that I was using with my OnePlus 3. It was about $30 in Amazon, works fine in my 5 with a OnePlus 3 spigen case. The only mods to the case were for the camera , the charging port is ok.
For the truck I have a ram mount x-grip, and a usb C cable, I don't need the dash charger as my drive is usually pretty long.
I was looking for gaming accessories like the Saitake 7007X, but most of the manufacturers of this kind of device list a max of 6.5 in, and the S20 Ultra is listed as 6.57 inches
Does anyone have Saitake 7007X or other similar gamepad accessory that they like and confirmed works with the S20 Ultra's size?
Here you go.
It is a very! tight squeeze. It wouldn't fit on with my Spigen case on.
Works fine without it though .
S20 Ultra has specs: 76x166.9x8mm, so as long as the bracket can hold those dimensions (esp. the 166.9 length), it should work, right?
I know they make some of those controllers for smaller tablets, too - so maybe those.
I want to pick a set up, but waiting for other people to recommend something.
I'm using 8BitDo gamepad w/ the phone holder bracket for now, but the phone being so heavy throws off the comfortable balance since the gamepad is so skinny and light.
Thought I would drop this here as well since we're all looking for things to do with our shiny new phones.
Album Link:
https://imgur.com/a/OvQVyxK
I have a few different controllers that work great with my S23 Ultra and thought I would share.
My favorite is the MOGA XP5-X controller. Great quality and the phone lip it includes is really nice.
Second would be my XBox One Elite Series 2 controller with the Amazon Luna Controller Phone Clip (yes, this clip fits XBox One Controllers without issue). It's not as versatile as the MOGA clip, but works great. For $14.99, it's a cheap solution to get nice controller to work with Mobile Gaming on the go.
The GameSir is really nice. I originally bought it for my Z Fold 3, but it works with the S23 Ultra. However, with a rugged case, it's a less than ideal fit, but if you have a slim case or no case/skin, it'll be just fine.
I play mostly on GamePass and xCloud (for AAA titles) and a few mobile games with controller support.
Let me know if you have any questions or comments!