Hi,
I've now spent quite a few frustrating hours trying to root my Alcatel 1c (model 5003D, running Android 8.1 Go) and nothing seems to work. A short overview of some of the rabbit holes I've gone down:
Root tools
Started with the obvious: root tools. In short, none that I ran work. There's a couple I haven't tried because the instructions were mostly in Russian and some googling turned up quite a few mentions of them containing malware, but other than that I've pretty much tried all the major ones.
Flashing images via fastboot
Naturally, the next place I turned was the awesome resource that is this forum. This thread gave me plenty of hope, but I was soon flummoxed by my device's fastboot mode for which a bunch of the normal features are either broken or are simply not implemented. Some examples of things that should work (and indeed work on other Alcatel phones, notably, it seems, ones that are not based on Spreadtrum) but didn't:
Code:
~/D/platform-tools > ./fastboot oem unlock
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot oem unlock-go
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot oem unlock-go --wipe
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot flashing unlock
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
(note the spelling error in the error message...)
Code:
~/D/platform-tools > ./fastboot flash recovery ../recovery.img
Sending 'recovery' (28266 KB) OKAY [ 1.582s]
Writing 'recovery' FAILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')
fastboot: error: Command failed
That last one was particularly intriguing, as it suggests there is a Flashing Lock Flag that can be unlocked. I tried all of the fastboot commands that seemed relevant but couldn't find any way of setting that flag or even figuring out if it actually exists. I even rand the boot.img through strings to see if I could find something interesting, but didn't turn up anything.
Just to be clear, before doing all this I set the phone to Developer Mode and checked the "OEM unlocking" feature.
Flashing tools
I tried various tools with which it's possible to flash phones. A lot of them use fastboot under the covers which doesn't work (see above). Some of them don't but didn't work on my phone all the same, for various reasons:
SPD flash tool - After yet more Googling I stumbled upon the SPD flash tool,built specifically to flash Spreadtrum-based devices. I downloaded the latest version, installed all of the necessary USB drivers and tried to flash the phone with the stock ROM. No dice. The tool fails to connect to the device via the USB2Serial thing that it uses to communicate. No idea what's going on or why it won't work, and haven't yet mustered the courage to dive into the source code. Of course, if I do get it to work, then I have to figure out how to actually root the device using this tool. I'm guessing it will involve unpacking the ROM (a PAC file), modifying the recovery.img to a TWRP (or similar), repacking it and flashing the result. I've only managed the unpacking so far, no clue as to the other 2 steps. BTW, the SPD flash tool site als has a "factory" and a "research" tool, besides the "upgrade" tool that I tried. Unless I'm missing something, all three seem to be exactly the same (save for the color scheme).
Alcatel Mobile Upgrade S - Installs just fine and then allows you to choose your phone out of a dropdown... that doesn't include my model.
Sugar MTK/QCT - Installed it and the necessary drivers but it can't find my phone, no matter what I try. Also, I keep reading that it needs login credentials (wut?)
Conclusion: argh!
So, nothing so far. Since it's a Spreadtrum phone it has an engineering mode that can be explored with an APK I found in this thread. Nothing in the settings it reveals appears to be of any help though. I also contacted the makers of the AIO Alcatel toolkit to see if they had any ideas, but after I explained the situation one of them concluded "Hmmm. New one on me". Needless to say I also tried searching this forum for more tips, but googling 'site:forum.xda-developers.com "5003D"' returns no hits.
For now, I'm forced to conclude that there is a lot of really awesome tooling out there created by some very talented people, but none of it works on my phone. As of yet the 5003D appears pretty unrootable. If anyone has any tips to help me along or point me in the right direction, I would be very appreciative.
bump
bump
Then type the command to show the device
fastboot -i 0x1bbb devices
Execute the next command which will show device info including bootloader status (e.g. locked).
fastboot -i 0x1bbb oem device-info
This command is to unlock the bootloader on Alcatel device
fastboot -i 0x1bbb oem unlock
Repeat Step and you should see “Device unlocked: true”
To reboot normally type:
fastboot -i 0x1bbb reboot
Done
This command is to unlock the bootloader on Alcatel device
fastboot -i 0x1bbb oem unlock
Click to expand...
Click to collapse
I've tried that a bunch of times in an bunch of different ways, and unfortunately that doesn't work for this particular phone.
lotus118 said:
I've tried that a bunch of times in an bunch of different ways, and unfortunately that doesn't work for this particular phone.
Click to expand...
Click to collapse
Rooting your phone's Android does NOT require you fiddle around with its boot-loader. Forget trying to make use of Fastboot.
So how would I go about this without using fastboot?
lotus118 said:
So how would I go about this without using fastboot?
Click to expand...
Click to collapse
1. Open Windows command prompt and input the following comand
Code:
adb devices
2. Start the ADB sideload in your phone's recovery
3. Then input the following command in the Windows command prompt
Code:
adb sideload <filename.Zip>
where <filename.zip> must of course be the real full filepathname of ZIP to get flashed
Related
Dear all,
I have made numerous attempts to unlock the bootloader of my Wiko U Feel Prime, but to no avail.
(My goal is to flash TWRP, root with Magisk and install LineageOS.)
USB debugging and OEM unlocking are enabled in the developer settings.
ADB recognises the device. When I execute adb reboot bootloader, the device reboots, and doesn't get past the "powered by Android" screen – but is nonetheless found by fastboot when I run fastboot devices. Seems like the USB drivers are functioning properly, correct?
Now, when I run fastboot oem unlock, I get the following response:
Code:
...
FAILED (remote: unknown command)
finished. total time: -0.000s
The command fastboot flashing unlock gives the same result.
Moreover, fastboot getvar all displays no unlocked variable. The command fastboot getvar unlocked yields
Code:
unlocked:
By the way, this phone was shipped SIM unlocked.
I've spent hours looking around the web for solutions, but everyone (including guides specifically written for Wiko U Feel Prime) simply says "unlock the bootloader" as if it's a trivial task. And I've run out of ideas. Could anyone help?
Thank you very much.
Hi, just got a brand new Armour x5, bought unlocked. It has Android 10 on it. First, I would like to back up entire phone without installing any apps at all, adb or fastboot commands to do so would be appreciated.
I tapped developer options 7 times, enabled adb, and OEM unlocking. I then adb reboot fastboot after allowing pc to connect, and in fastboot I try:
fastboot oem unlock
and
fastboot flashing unlock
C:\adb>adb devices
List of devices attached
3082SH1001004262 device
C:\adb>adb reboot recovery
C:\adb>fastboot devices
3082SH1001004262 fastboot
C:\adb>fastboot oem unlock
...
FAILED (remote: Command not supported in default implementation)
finished. total time: 0.010s
C:\adb>fastboot flashing unlock
...
FAILED (remote: Unrecognized command flashing unlock)
finished. total time: 0.010s
to no avail, fastboot just looks blackscreen and the tiniest of fonts lol... yes drivers are installed.
So I reboot, and try the Armour 6 tut, but Magisk manager has no option to patch the boot.img I extracted from stock firmware, it also has a distinct lack of advanced settings, most likely due to my not yet having flashed a twrp or magisk-20.4 due to still unable to find out about dm-verity, (is dm-verity different between android 9 + 10?) meaning I wont flash anything that will brick the fone before i even put a sim into it.
Any help appreciated. Google sux.
Edit: Well after 12 or so hours I can honestly say that rooting is all gone downhill, does anyone actually know what they are doing nowadays?
I read all 5 copies of the rooting procedure for this phone, none of which is anywhere near complete, and so very wrong. What might have worked years ago does not work now.
In the Armour x5, when rebooting into fastboot using adb reboot fastboot, we are taken to a black screen with the smallest of txt saying fastboot. This fastboot does not ****in work ('scuse the swearing) so dont tell people to do this, it wont work. Nothing works in this fastboot mode. What you have to do is go into ANOTHER fastboot, by going into what we call recovery, by pressing power and volume up button, then choosing fastboot, ONLY then will fastboot commands kind of work. I say kind of, because most of the fastboot commands do nothing anyway, but at least show some output proving that booting into fastboot from adb is useless now.
For instance, in the pure black screen fastboot, nothing is found in adb or fastboot shell, no 'null' (needing activation), no waiting, just black nothingness. But in the recovery version of fastboot, we see fastbootd at the top of the screen, this is the fastboot that recognises at least partial commands. But none I have actually tried re finding bootloader lock status etc, nada.
I also noticed, I do have shell access when in adb, but not recovery, so if anyone knows how to flash a twrp for android 10 using shell with no root, I'll try it on my not so shiney brand spankin blank fastbootin fone
Hello there,
A newbie here, trying to unlock a TCL 20B (6159K) phone.
Android 11, November 2021 security patch (MTK Easy Su doesn't work with that, reportedly some vulnerability was patched), fastboot accessible but acting weird.
1. Got fastboot from here.
For some reason it doesn't understand the -i option, but connects with the only phone I'm trying to unlock attached anyway.
VID is 0x0e8d, btw.
2. Got adb from don't remember where about a year ago (for my previous Lenovo phone)
3. Unlocked the Developer Options
4. Checked "Allow bootloader unlock" and "Enable USB debugging" options there (not sure how those are named exactly in English, but I 100% guarantee, I've checked the right ones)
5. Sent phone into fastboot with
Code:
adb boot bootloader
6. Checked the unlockability with
Bash:
fastboot flashing get_unlock_ability
(bootloader) unlock_ability = 16777216
OKAY [ 0.005s]
Finished. Total time: 0.006s
7. Tried to unlock the thing, but
Code:
fastboot flashing unlock
FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
and
Code:
fastboot flashing unlock_critical
FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
8. Searching here, on XDA forums revealed there's no TCL 20B sub-form.
9. While there are tons of topics on not allowed in locked state, none of those helps.
fastboot oem unlock is seemingly an old way to do things (TCL 20B is a rather new device released WAY past 2015)
TCL is an Alcatel device, not a Xiaomi or some ZUK one, to require an account (haven't found anthing on "alcatel account")
trying to load some recovery from PC that might work failed as well (for the same reason)
Code:
[/LIST]
./fastboot boot twrp-3.6.1.img
Sending 'boot.img' (8932 KB) OKAY [ 0.212s]
Booting FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
I've read some TCL 10 phones don't even have a fastboot, but TCL 20B clearly does.
Any Ideas how to unlock the bootloader?
P.S. Maybe a new sub forum for 20B? This got placed into the "TCL 20 5G" one, which doesn't seem right.
EDIT:
Ok, have found how to proceed on my own.
Even rooted the thing.
Go here https://github.com/bkerler/mtkclient, grab the ISO, backup, install patched magisk, patch the boot_a, flash patched boot_a and empty vbmeta_a, erase metadata, userdata and md_udc. Reboot, reinstall pathched magisk.
Don't lock the bootloader to avoid red state.
Huge kudos to mtkclient devs
Hello, i been trying to root my tcl 20b (6159a) but i cant figure how, i follow the instructions of mtkclient. Install it in windows, python, mtk repository, all the process, but when i try to replace boot_a.img it doesnt work from the cmd command, but in the python mtk_gui i can replace boot_a.bin and erase vbmeta_a.bin when i do it from there the cellphone keep in bootloop, i can fix the bootloop but cant root it. If u read this, can you plz be more specific with the steps, and made a little tutorial, its not necessary images or video just some more in deep info how you achieve root, thx
I bought the Asus ZenFone 8 Flip with the bootloader unlocked, it is not running a custom ROM. How do I lock the bootloader? Thank you
Try this with fastboot:
fastboot oem lock
However, this won't restore your warranty and you won't receive updates, since surely who has unlocked your device has used the official bootloader unlock tool which registers your serial number
maicol07 said:
Try this with fastboot:
fastboot oem lock
However, this won't restore your warranty and you won't receive updates, since surely who has unlocked your device has used the official bootloader unlock tool which registers your serial number
Click to expand...
Click to collapse
how do I go about something like that? I would only like to be on official software so how will I not be able to receive updates?
Kiribro02 said:
how do I go about something like that? I would only like to be on official software so how will I not be able to receive updates?
Click to expand...
Click to collapse
You won't get OTA updates, but you can still update manually downloading the zip from Asus website.
Unfortunately that's the price if you unlock the device (not only for Asus, a lot of other manufacturers (i.e. Sony) do this too)
maicol07 said:
You won't get OTA updates, but you can still update manually downloading the zip from Asus website.
Unfortunately that's the price if you unlock the device (not only for Asus, a lot of other manufacturers (i.e. Sony) do this too)
Click to expand...
Click to collapse
interesting... So I don't know how to lock the bootloader precisely. So I download the latest firmware from the Asus website, plug the phone into the computer run fastboot then what? Am I missing something?
Kiribro02 said:
interesting... So I don't know how to lock the bootloader precisely. So I download the latest firmware from the Asus website, plug the phone into the computer run fastboot then what? Am I missing something?
Click to expand...
Click to collapse
No, just follow these steps:
Make a backup of your phone!! Unlocking/Locking the bootloader erases all your data partition (so all your stuff will be gone!)
Install ADB on your PC if you don't have it (check how to install it: https://www.xda-developers.com/install-adb-windows-macos-linux/).
Plug in your device via USB with Debug USB setting enabled (in Developer Settings)
Open a terminal prompt on your PC
In the terminal run adb devices. If you see your device I the list then you're fine. Otherwise, you have mistaken something in the previous steps.
Run adb reboot fastboot (or adb reboot bootloader if it doesn't work) to reboot into fastboot mode
Run fastboot oem lock to lock the bootloader
Run fastboot reboot to reboot the system
Your device is now locked!
DISCLAIMER:
I'm not responsible of any data loss, damages and/or bricks you make to your device(s) by following this guide!
Click to expand...
Click to collapse
To update the system when a new version is out, since you won't receive OTAs:
Go to Zenfone 8 Flip support page: https://www.asus.com/Mobile/Phones/ZenFone/Zenfone-8-Flip/HelpDesk_Download/
Choose Android as OS and scroll down to "Firmware"
Download the latest zip
Put it in the internal storage (in the root directory, not inside another folder!)
Two paths:
If you put the zip from PC via USB simply unplug the USB cable
If you downloaded the zip and put it manually via file manager from the phone reboot the system
A notification should pop out, notifying you there is a firmware package to install!
Just follow the notification message and you'll be done!
Hey so I installed adb and ran the phone under fastboot but when I run fastboot oem lock all it says in the windows powershell is < waiting for any device >
Kiribro02 said:
Hey so I installed adb and ran the phone under fastboot but when I run fastboot oem lock all it says in the windows powershell is < waiting for any device >
Click to expand...
Click to collapse
Oh that's an issue I have all the times with Asus devices. There's a simple one-time fix though: just install the official Asus ADB drivers.
Download them from this page (I know it's the smaller Zenfone 8 page, but they work with every Asus device): https://www.asus.com/it/Mobile/Phones/ZenFone/Zenfone-8/HelpDesk_Download/
Choose your windows version (for 10 and 11 choose 8.1)
Download the USB driver
Extract the archive somewhere in your PC
Open Device manager in your PC (search it in start menu) while the phone is connected via USB and in fastboot mode
You'll notice an unknown device with a yellow/orange warning icon at the top of the devices list. Right click on it and choose Update drivers.
Choose "Search driver in the PC" (the second option (don't choose the first one since it searches the driver automatically on Windows update))
Choose the folder you extracted
Click "Next"
Drivers should be installed and fastboot should recognize your device (to test run the command: fastboot devices)
Sorry for the late reply, but I didn't get any notification from XDA
there were two options for drivers android adb and android composite adb drivers I selected the composite one but it doesn't seem like it was installed
Kiribro02 said:
When I try to update the drivers it says that windows was unable to install your and then it says the device.
Click to expand...
Click to collapse
Do you installed the drivers when the phone is in fastboot mode?
Also, I've noticed some steps are not clear (and one is doubled), I'll clean it
Kiribro02 said:
there were two options for drivers android adb and android composite adb drivers I selected the composite one but it doesn't seem like it was installed
Click to expand...
Click to collapse
Try all the two, I don't remember which one works (I think the Composite worked for me), but try also with the other ones
Hi,
I've bought a second hand zenfone 8 flip. After Hard Reset I have to enter the old PIN to continue. The problem is the seller doesn't have the PIN and is not willing to take the phone back. ASUS is not willing to help because I bought it second hand.
I already flashed with raw firmware, but this is still coming up.
Any ideas? Should I start a new thread?
b4rbaar said:
Hi,
I've bought a second hand zenfone 8 flip. After Hard Reset I have to enter the old PIN to continue. The problem is the seller doesn't have the PIN and is not willing to take the phone back. ASUS is not willing to help because I bought it second hand.
I already flashed with raw firmware, but this is still coming up.
Any ideas? Should I start a new thread?
Click to expand...
Click to collapse
Hi, yes you should create a new thread since it's a different topic
It's not working for me, please help:
C:\platform-tools>fastboot devices
M4AIB760******* fastboot
C:\platform-tools>fastboot oem lock
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
So, as you can see, the driver is installed correctly as I get an answer from fastboot devices, but then the OEM lock doesn't work.
Are there any other ways to re-lock it?
Thank you!
wyktron said:
It's not working for me, please help:
C:\platform-tools>fastboot devices
M4AIB760******* fastboot
C:\platform-tools>fastboot oem lock
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
So, as you can see, the driver is installed correctly as I get an answer from fastboot devices, but then the OEM lock doesn't work.
Are there any other ways to re-lock it?
Thank you!
Click to expand...
Click to collapse
@wyktron can you try this? This worked with my Zenfone 6 some years ago, it might be the same for ZF8 Flip, due to Asus customization:
Bash:
fastboot oem asus-back
maicol07 said:
@wyktron can you try this? This worked with my Zenfone 6 some years ago, it might be the same for ZF8 Flip, due to Asus customization:
Bash:
fastboot oem asus-back
Click to expand...
Click to collapse
@maicol07 thanks for the quick reply, here's what I got:
C:\platform-tools>fastboot oem asus-back
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
same error message
wyktron said:
@maicol07 thanks for the quick reply, here's what I got:
C:\platform-tools>fastboot oem asus-back
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
same error message
Click to expand...
Click to collapse
Try this one:
Code:
fastboot oem asus-csc_lk
maicol07 said:
Try this one:
Code:
fastboot oem asus-csc_lk
Click to expand...
Click to collapse
@maicol07 seems like any oem command shows this error, here's what I got:
C:\platform-tools>fastboot oem asus-csc_lk
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem get-sn
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem get-imei1
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem
fastboot: usage: empty oem command
C:\platform-tools>fastboot flashing lock
FAILED (remote: 'Unrecognized command flashing lock')
fastboot: error: Command failed
at this point, crying is my only option
what else can I try? I can't use key features like google pay because of that
thanks again for your support!
wyktron said:
@maicol07 seems like any oem command shows this error, here's what I got:
C:\platform-tools>fastboot oem asus-csc_lk
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem get-sn
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem get-imei1
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
C:\platform-tools>fastboot oem
fastboot: usage: empty oem command
C:\platform-tools>fastboot flashing lock
FAILED (remote: 'Unrecognized command flashing lock')
fastboot: error: Command failed
at this point, crying is my only option
what else can I try? I can't use key features like google pay because of that
thanks again for your support!
Click to expand...
Click to collapse
As mentioned here check if you have enabled Debug USB and OEM unlock in developer options and try to reboot into bootloader (with either fastboot reboot bootloader or adb reboot bootloader)
maicol07 said:
As mentioned here check if you have enabled Debug USB and OEM unlock in developer options and try to reboot into bootloader (with either fastboot reboot bootloader or adb reboot bootloader)
Click to expand...
Click to collapse
@maicol07 there's no OEM unlock in my developer options, only the USB debugging (which is already on)
besides this oem method, is there another way to lock it? perhaps through the zenfone flash tool (I have it installed and it detects my phone, but never used it)
first of i apologise if i have bad english
ok so i had this device for some time and decited to root it (my first time rooting a phone). And i need to unlock bootloader to flash stuff and i have all necessary things on my pc (platform tools,drivers,) everything seems to be working but as soon as i get into bootloader the only command that works is "fastboot devices" Any other commands dont work. I tried everything online and this is my only other thing left to do. I've been researching for 2 days at this point and i am almost certain that the commands are disabled by the company itself (like huawei) did anybody else ever root/unlock bootloader for this device because i didnt find any actual root guide for the particular device (besides from the auto generated ones like https://rootguia.com/how-to-flash-caterpillar-cat-s31/ https://mobilewithdrivers.com/unlock-bootloader/cat-s31-16gb-2gb-ram )
The exact error is:
FAILED (remote: 'unknown command')
fastboot: error: Command failed
(and this error is for every single command that uses fastboot besides from fastboot devices. Adb works just fine)
I tried:
reinstalling drivers
installing drivers that are "prepared" for the cat s31
changing cable
changing port to usb 2.0
reinstalling platform tools (from official google site)
checking device manager for the device (it shows up as android bootloader interface)
trying alternative oem unlock commands (fastboot oem unlock, fastboot flashing unlock and 2 other commands that i cant remember rn)
having oem unlocking and usb debugging enabled from the developer options
in my opinion the only explanation is the commands being disabled by default and even if it was it wouldnt be known if it was since most people dont root or purchase this device
please help me out here
fastboot flashing unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
or
command finished but unlocking not allowed?
you can try to dump ROM, maybe it's possible to unlock bootloader on devinfo partition
https://github.com/bkerler/edl
aIecxs said:
fastboot flashing unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
or
command finished but unlocking not allowed?
you can try to dump ROM, maybe it's possible to unlock bootloader on devinfo partition
https://github.com/bkerler/edl
Click to expand...
Click to collapse
sorry i forgot to mention im running android 8.1 oreo on this device and devinfo partition method will not work according to what i read
Never mind. anyway, if you dump phone in edl mode (or download stock ROM somewhere else) you can search aboot for device specific fastboot oem commands
How to Discover Hidden Fastboot Commands
There are many hidden fastboot commands on your device. In order to find them, we will need to dump the bootloader and examine the contents!
www.xda-developers.com
aIecxs said:
Never mind. anyway, if you dump phone in edl mode (or download stock ROM somewhere else) you can search aboot for device specific fastboot oem commands
How to Discover Hidden Fastboot Commands
There are many hidden fastboot commands on your device. In order to find them, we will need to dump the bootloader and examine the contents!
www.xda-developers.com
Click to expand...
Click to collapse
what do you mean by dump phone into edl mode do i download one of these https://ministryofsolutions.com/2022/01/cat-s31-edl-firmware-android-8-1-official-rom.html and install it from recovery mode and try to get it in edl mode and will it not work if i dont dump
just extract that ROM you found
aIecxs said:
just extract that ROM you found
Click to expand...
Click to collapse
and do what. im new to the rooting stuff
find the file aboot.mbn (or similar) and analyze for fastboot commands
aIecxs said:
find the file aboot.mbn (or similar) and analyze for fastboot command
Click to expand...
Click to collapse
so i downloaded the file and these are the things in the firmware file (attachement)
i cant find a file that looks or resambles aboot.mbn
it's emmc_appsboot.mbn so download strings for windows (see link post #4) and try to find fastboot commands, maybe you are lucky and find the proper command to unlock bootloader.
edit: not sure about Windows 10/11 comes with strings binary (powershell?)
aIecxs said:
it's emmc_appsboot.mbn so download strings for windows (see link post #4) and try to find fastboot commands, maybe you are lucky and find the proper command to unlock bootloader.
edit: not sure about Windows 10/11 comes with strings binary (powershell?)
Click to expand...
Click to collapse
sooo turns out win11 strings commands are kinda different or broken (probably not im just dumb) i just used notepad with ctrl+f and couldnt find anything besides the text that says are you sure you want to unlock bootloader but that is probably not related since i didnt find any commands or anything. So im actually going to attach the emmc_appsboot.mbn i know it looks sketchy you dont have to download it its totally understandable but if you do please do give it a check and respond. I want to get this done one way or another its 1 am i want to sleep ;(
could it be true that they made a truly un unlockable unrootable device
I had a look but there are no fastboot commands in it. However "oem unlock" is mentioned, so the usual fastboot oem unlock should work.
maybe there is more in secondary bootloader sbl1.mbn
aIecxs said:
I had a look but there are no fastboot commands in it. However "oem unlock" is mentioned, so the usual fastboot oem unlock should work.
Click to expand...
Click to collapse
trust me i have tried many many many many times and only got a
FAILED (remote: 'unknown command')
fastboot: error: Command failed
edit: the only place oem unlock is mentioned is a text that says oem unlock not allowed which might be default text by android or whatever but cat devs somehow messed it up somehow??
aIecxs said:
I had a look but there are no fastboot commands in it. However "oem unlock" is mentioned, so the usual fastboot oem unlock should work.
maybe there is more in secondary bootloader sbl1.mbn
Click to expand...
Click to collapse
just saw the edit i will check now
nope nothing related no oem unlock no fastboot no flashing no flash nothing is mentioned ill attach it if you want to look
oem unlock not allowed is standard text if one forgot to enable oem unlocking in developer options in android settings.
maybe flash this ROM maybe it is unlockable?
aIecxs said:
oem unlock not allowed is standard text if one forgot to enable oem unlocking in developer options in android settings.
maybe flash this ROM maybe it is unlockable?
Click to expand...
Click to collapse
from recovery using the flash firmware with adb option??
edit: i meant apply update from adb
edit2: what if i hard reset from recovery would that reset the firmware?
edl firmware cannot flashed from recovery. power off phone, press both volume keys and plug in usb-cable. check VID/PID from windows device manager. if you see device ID (05c6:9008) the phone is in EDL mode. you can now use EDL tool (post #2) and backup current ROM. then you can flash other ROM.
aIecxs said:
It's edl firmware cannot flashed from recovery
Click to expand...
Click to collapse
so what do i download that can be flashed from recovery