Hi all, This is my personal debloating module which i'm using in my OP7P
Debloats Oneplus analytics, Google apps, unnecesary qualcomm apps
I don't own the device(OP8P) personally .
But with help of @musicman5844 I made the debloat module working in OP8 series
Requirements:
- OOS A10
- Supports All oneplus 8 series
- Magisk 20+
- Should be flashed only in Magisk
Debloating Options :
1- Extreme debloat
Warning -
- Before flashing extreme debloat, Goto Settings - Security - Emergency rescue - Emergency call trigger - disable
{ If you don't disable emergency rescue, double tap power button -camera shortcut won't work. }
- Oneplus software update app was removed so use oxygen updater from Playstore
- Removed Google apps can be installed from Playstore
- Removed facebook, insta other bloats
Code:
/system/app/OPPush
/system/app/AntHalService
/system/app/BackupRestoreRemoteService
/system/app/BasicDreams
/system/app/BookmarkProvider
/system/app/BTtestmode
/system/app/BuiltInPrintService
/system/app/CarrierDefaultApp
/system/app/CtsShimPrebuilt
/system/app/EngineeringMode
/system/app/EngSpecialTest
/system/app/FBAppmanager
/system/app/GoogleAssistant
/system/app/GooglePrintRecommendationService
/system/app/LogKitSdService
/system/app/netflix-activation
/system/app/netflix-stub
/system/app/NFCTestMode
/system/app/NVBackupUI
/system/app/oem_tcma
/system/app/OemAutoTestServer
/system/app/OEMLogKit
/system/app/OPAppUpgrader
/system/app/OPBackup
/system/app/OPBreathMode
/system/app/OPCommonLogTool
/system/app/OPBugReportLite
/system/app/OPFilemanager
/system/app/OPGeoIpTime
/system/app/OPScreenRecord
/system/app/OPYellowpage
/system/app/PartnerBookmarksProvider
/system/app/PhotosOnline
/system/app/PlayAutoInstallConfig
/system/app/Rftoolkit
/system/app/SensorTestTool
/system/app/SmscPlugger
/system/app/SoterService
/system/app/Stk
/system/app/Traceur
/system/app/WAPPushManager
/system/app/YTMusic
/system/app/EasterEgg_O2
/system/app/OPTelephonyCollectionData
/system/priv-app/GoogleDocumentsUIPrebuilt
/system/product/priv-app/OobConfig
/system/priv-app/BackupRestoreConfirmation
/system/priv-app/CtsShimPrivPrebuilt
/system/priv-app/DynamicSystemInstallationService
/system/priv-app/EmergencyInfo
/system/priv-app/FBInstaller
/system/priv-app/FBServices
/system/priv-app/HotwordEnrollmentOKGoogleHEXAGON
/system/priv-app/HotwordEnrollmentXGoogleHEXAGON
/system/priv-app/IFAAService
/system/priv-app/ManagedProvisioning
/system/priv-app/OnePlusWizard
/system/priv-app/OPCellBroadcastReceiver
/system/priv-app/OPDeviceManagerProvider
/system/priv-app/OPDeviceManager
/system/priv-app/OPSimContacts
/system/priv-app/RcsSDK
/system/priv-app/SharedStorageBackup
/system/priv-app/TagGoogle
/system/product/app/CalendarGoogle
/system/product/app/Chrome
/system/product/app/DeviceInfo
/system/product/app/Drive
/system/product/app/Duo
/system/product/app/Gmail2
/system/product/app/Nearme
/system/product/app/DynamicDDSService
/system/product/app/GoogleLocationHistory
/system/product/app/GooglePayIndia
/system/product/app/GooglePay
/system/product/app/GoogleTTS
/system/product/app/IndiaAccount
/system/product/app/Maps
/system/product/app/OPMemberShip
/system/product/app/Photos
/system/product/app/PowerOffAlarm
/system/product/app/remoteSimLockAuthentication
/system/product/app/remotesimlockservice
/system/product/app/talkback
/system/product/app/TmoEngMode
/system/product/app/uceShimService
/system/product/app/uimgbaservice
/system/product/app/uimlpaservice
/system/product/app/uimremoteclient
/system/product/app/uimremoteserver
/system/product/app/Videos
/system/product/app/YouTube
/system/product/priv-app/AndroidAutoStub
/system/product/priv-app/CloudService
/system/product/priv-app/GoogleFeedback
/system/product/priv-app/GoogleOneTimeInitializer
/system/product/priv-app/GooglePartnerSetup
/system/product/priv-app/GoogleRestore
/system/product/priv-app/OPWorkLifeBalance
/system/product/priv-app/SetupWizard
/system/product/priv-app/Velvet
/system/reserve/Audible
/system/reserve/AmazonShoppingMDIP
/system/reserve/AudibleMDIP
/system/reserve/card
/system/reserve/facebook-localapk-stub
/system/reserve/instagram-localapk-stub
/system/reserve/Kindle
/system/reserve/messenger-localapk-stub
/system/reserve/OPBackupRestore
/system/reserve/OPForum
/system/reserve/GameCenter
/system/reserve/OPIconpackOnePlusH2
/system/reserve/OPIconpackOnePlusO2
/system/reserve/OPNote
/system/reserve/OPSports
/system/reserve/PrimeVideo
/system/reserve/OPWidget
/system/reserve/SoundRecorder
/system/reserve/Weather
/system/vendor/app/pasrservice
/system/priv-app/CallLogBackup
/system/app/OPSesAuthentication
/system/app/WallpaperBackup
/system/app/WapiCertManage
/system/product/priv-app/Wellbeing
/system/product/priv-app/Turbo
2 - Debloat Google apps except play service and playstore and other playstore downloadable apps
Code:
/system/app/BackupRestoreRemoteService
/system/app/BasicDreams
/system/app/BookmarkProvider
/system/app/FBAppmanager
/system/app/GoogleAssistant
/system/app/GooglePrintRecommendationService
/system/app/netflix-activation
/system/app/netflix-stub
/system/app/OPFilemanager
/system/app/PartnerBookmarksProvider
/system/app/PlayAutoInstallConfig
/system/app/YTMusic
/system/priv-app/BackupRestoreConfirmation
/system/priv-app/FBInstaller
/system/priv-app/FBServices
/system/priv-app/SharedStorageBackup
/system/priv-app/TagGoogle
/system/product/app/CalendarGoogle
/system/product/app/Chrome
/system/product/app/Drive
/system/product/app/Duo
/system/product/app/Gmail2
/system/product/app/GoogleLocationHistory
/system/product/app/GooglePayIndia
/system/product/app/GooglePay
/system/product/app/GoogleTTS
/system/product/app/Maps
/system/product/app/Photos
/system/product/app/talkback
/system/product/app/Videos
/system/product/app/Nearme
/system/product/app/YouTube
/system/product/priv-app/AndroidAutoStub
/system/product/priv-app/GoogleFeedback
/system/product/priv-app/GoogleOneTimeInitializer
/system/product/priv-app/GooglePartnerSetup
/system/product/priv-app/GoogleRestore
/system/product/priv-app/SetupWizard
/system/product/priv-app/Velvet
/system/reserve/Audible
/system/reserve/AmazonShoppingMDIP
/system/reserve/AudibleMDIP
/system/reserve/card
/system/reserve/facebook-localapk-stub
/system/reserve/instagram-localapk-stub
/system/reserve/Kindle
/system/reserve/messenger-localapk-stub
/system/reserve/OPBackupRestore
/system/reserve/OPForum
/system/reserve/GameCenter
/system/reserve/OPIconpackOnePlusH2
/system/reserve/OPIconpackOnePlusO2
/system/reserve/OPNote
/system/reserve/OPSports
/system/reserve/PrimeVideo
/system/reserve/OPWidget
/system/reserve/SoundRecorder
/system/reserve/Weather
/system/product/priv-app/OobConfig
/system/priv-app/GoogleDocumentsUIPrebuilt
/system/product/priv-app/Wellbeing
/system/product/priv-app/Turbo
3- Debloat Oneplus Analytics only
Code:
/system/app/OPPush
/system/app/BTtestmode
/system/app/CarrierDefaultApp
/system/app/CtsShimPrebuilt
/system/app/EngineeringMode
/system/app/EngSpecialTest
/system/app/OPTelephonyCollectionData
/system/app/LogKitSdService
/system/app/NFCTestMode
/system/app/NVBackupUI
/system/app/oem_tcma
/system/app/OemAutoTestServer
/system/app/OEMLogKit
/system/app/OPBackup
/system/app/OPCommonLogTool
/system/app/OPBugReportLite
/system/app/OPFilemanager
/system/app/OPGeoIpTime
/system/app/OPYellowpage
/system/app/PhotosOnline
/system/priv-app/CtsShimPrivPrebuilt
/system/app/Rftoolkit
/system/app/SensorTestTool
/system/app/SmscPlugger
/system/app/SoterService
/system/app/Stk
/system/app/Traceur
/system/priv-app/IFAAService
/system/priv-app/OnePlusWizard
/system/priv-app/OPCellBroadcastReceiver
/system/priv-app/OPDeviceManagerProvider
/system/priv-app/OPDeviceManager
/system/priv-app/OPSimContacts
/system/product/app/PowerOffAlarm
/system/product/app/TmoEngMode
/system/product/app/Nearme
/system/reserve/Audible
/system/reserve/AmazonShoppingMDIP
/system/reserve/AudibleMDIP
/system/reserve/card
/system/reserve/facebook-localapk-stub
/system/reserve/instagram-localapk-stub
/system/reserve/Kindle
/system/reserve/messenger-localapk-stub
/system/reserve/OPBackupRestore
/system/reserve/OPForum
/system/reserve/GameCenter
/system/reserve/OPIconpackOnePlusH2
/system/reserve/OPIconpackOnePlusO2
/system/reserve/OPNote
/system/reserve/OPSports
/system/reserve/PrimeVideo
/system/reserve/OPWidget
/system/reserve/SoundRecorder
/system/reserve/Weather
/system/app/OPSesAuthentication
4- Remove unnecessary services like appmeasurement, gms analytics
Script by By foobar66
List of services disabled
Code:
com.braintreepayments.api.internal.AnalyticsIntentService
com.facebook.ads.internal.ipc.AdsMessengerService
com.facebook.ads.internal.ipc.AdsProcessPriorityService
com.facebook.internal.FacebookInitProvider
com.google.analytics.tracking.android.CampaignTrackingReceiver
com.google.analytics.tracking.android.CampaignTrackingService
com.google.android.gms.ads.MobileAdsInitProvider
com.google.android.gms.analytics.AnalyticsJobService
com.google.android.gms.analytics.AnalyticsReceiver
com.google.android.gms.analytics.AnalyticsService
com.google.android.gms.analytics.AnalyticsTaskService
com.google.android.gms.auth.api.signin.RevocationBoundService
com.google.android.gms.measurement.AppMeasurementInstallReferrerReceiver
com.google.android.gms.measurement.AppMeasurementJobService
com.google.android.gms.measurement.AppMeasurementReceiver com.google.android.gms.measurement.AppMeasurementService
com.google.firebase.perf.provider.FirebasePerfProvider
com.google.firebase.provider.FirebasePerfProvider
com.google.android.apps.xcn.libraries.clearcut.persistence.LogCommitService"
Credits
Tomatot for his original mod here
Analytics Script by foobar66 his original thread can be found here
Changelog
-v1 Initial Release
V 1.1
-Added to oneplus analytics
Code:
/system/app/OPTelephonyCollectionData
- Added to Extreme debloat
Code:
/system/app/EasterEgg_O2
/system/app/OPTelephonyCollectionData
/system/priv-app/GoogleDocumentsUIPrebuilt
/system/product/priv-app/OobConfig
-Added to google debloat
Code:
/system/product/priv-app/OobConfig
/system/priv-app/GoogleDocumentsUIPrebuilt
V1.2
-Added separate option to debloat gboard
V1.3
-Added to extreme debloat
Code:
/system/priv-app/CallLogBackup
/system/app/OPSesAuthentication
/system/app/WallpaperBackup
/system/app/WapiCertManage
/system/product/priv-app/Wellbeing
/system/product/priv-app/Turbo
- Added to oneplus analytics
Code:
/system/app/OPSesAuthentication
-Added to Google debloat
Code:
/system/product/priv-app/Wellbeing
/system/product/priv-app/Turbo
- Added Anysoft keyboard as alternative when gboard is debloated
V1.4
-Added to extreme
Code:
/system/product/priv-app/StorageManager
/system/app/OPIntelliService
Replaced system/etc/init/
bootstat.rc
bluetooth-events.rc
dumpstate.rc
engineermode.rc
recovery-refresh.rc
recovery-persist.rc
Click to expand...
Click to collapse
with empty file
V1.5
Removed
Code:
/system/app/OPIntelliService
/system/priv-app/GoogleDocumentsUIPrebuilt
Added to Extreme Debloat
Code:
/system/product/priv-app/IndiaOPRoamingServiceRelease
/system/product/priv-app/OPWorkLifeBalance
/system/product/app/heytap_mcs_in
/system/product/app/HeytapIdProvider
Download link
Android File host
Your welcome glad I could help works like a charm
Just to be sure. This removes all of those or can i choose say debloat only 3 and 4?
pyry666 said:
Just to be sure. This removes all of those or can i choose say debloat only 3 and 4?
Click to expand...
Click to collapse
You can choose specifically . There are four options
1- Extreme debloat
2- Debloat Google apps and unnecessary apps
3- Debloat OnePlus analytics
4- Debloat Gboard
5- Remove unwanted services like app measurements,
Perfect, I choosed Extrem debloat and everything works fine. Thanks.
Thank you for your Amazing work. Can i use this on my 7t pro?
Goku1992 said:
Thank you for your Amazing work. Can i use this on my 7t pro?
Click to expand...
Click to collapse
Hey i already made a thread for OnePlus 7 series see here ,
https://forum.xda-developers.com/oneplus-7-pro/development/eagle-debloater-v1-0-t4091677
works pretty well on my op8pro
---------- Post added at 09:38 PM ---------- Previous post was at 09:35 PM ----------
Hi thanks for this magisk module. I have done a extreme debloat but have a question.
I have installed the oxygen updater, but this either requires TWRP (full install) and TWRP is not yet available for the Oneplus 8 pro. Or a incremental update which requires the original updater app.
Could you please describe to me the name and procedure to restore the original updater app? (Should be removing the empty apk in /system/priv-app ?)
Thanks!
damige85 said:
Hi thanks for this magisk module. I have done a extreme debloat but have a question.
I have installed the oxygen updater, but this either requires TWRP (full install) and TWRP is not yet available for the Oneplus 8 pro. Or a incremental update which requires the original updater app.
Could you please describe to me the name and procedure to restore the original updater app? (Should be removing the empty apk in /system/priv-app ?)
Thanks!
Click to expand...
Click to collapse
Remove this lines from install.sh and flash the Debloat zip
/system/app/OPBackup
/system/priv-app/DynamicSystemInstallationService
methuntt said:
Remove this lines from install.sh and flash the Debloat zip
/system/app/OPBackup
/system/priv-app/DynamicSystemInstallationService
Click to expand...
Click to collapse
Thanks, i have tried this and it seems to work. System update is available again. Would it make sense to have OPBackup and DynamicSystemInstallationService left installed in version 1.5? As i am not aware how other users will be able to update their devices without those packages installed. (and without TWRP at this time)
damige85 said:
Thanks, i have tried this and it seems to work. System update is available again. Would it make sense to have OPBackup and DynamicSystemInstallationService left installed in version 1.5? As i am not aware how other users will be able to update their devices without those packages installed. (and without TWRP at this time)
Click to expand...
Click to collapse
Sure i will add an option to Debloat ota update app or not .
Can I do the same through ADB? without root.
ultraklew said:
Can I do the same through ADB? without root.
Click to expand...
Click to collapse
Nope. If you're using adb try this
pm uninstall -k --user 0 (package name)
Ok. And where to get the list of app?
Is there anything removed that would mess with fingerprint scanner?
masri1987 said:
Is there anything removed that would mess with fingerprint scanner?
Click to expand...
Click to collapse
No.
methuntt said:
Sure i will add an option to Debloat ota update app or not .
Click to expand...
Click to collapse
I tried v1.6 which has this option, chose Vol-down for no, but System Updates is still disabled.
methuntt said:
Remove this lines from install.sh and flash the Debloat zip
/system/app/OPBackup
/system/priv-app/DynamicSystemInstallationService
Click to expand...
Click to collapse
Should I remove the line for /system/app/OPBackup from the "Debloat Oneplus Analytics and some unwanted oneplus apps" section and rerun it?
sleepy_76 said:
I tried v1.6 which has this option, chose Vol-down for no, but System Updates is still disabled.
Should I remove the line for /system/app/OPBackup from the "Debloat Oneplus Analytics and some unwanted oneplus apps" section and rerun it?
Click to expand...
Click to collapse
Yes, you should remove .
I forget to remove from analytics section.
I will update in next version.
methuntt said:
Yes, you should remove .
I forget to remove from analytics section.
I will update in next version.
Click to expand...
Click to collapse
How should I edit the .sh file? I can't seem to edit it as it's in a zip file.
Sorry if this is a noob question.
Sent from my IN2020 using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! You may ask yourself what this rom is about and what you can expect from it, so it's basically something similar to the SuperMan-Rom on the Galaxy S7/S7 edge! It has many custom featuers, but you will find it below in the feature list :thumbup:
As you maybe know I'm a little fanboy from samsung, means I really love the stock look of the UI and the rom will always be based on most recent version from samsung, current base used is G955FXXU1CRC7 (compatible with S8 and S8+)
I wish you much fun reading through the features and while using this rom! Enjoy
So this rom should be installed by anyone loving to use a rom close to stock BUT with many mods inside aroma/rom control.
Also I'd like to make the already fast galaxy s8 even more faster as it already is! Let's see if we can reach this goal
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V2.0.0 Oreo:
- Based on latest G955FXXU1CRC7 Nougat base
- Prerooted with SuperSU V2.82 SR5 or MagiskSU (choose in aroma)
- Magisk V16.3 (aroma selectable)
- Latest Busybox installed (aroma selectable)
- Aroma installer! with support up to 4GB zip files
- CSC features can be choosen and installed in aroma (such as Applock, Floating Message, Call recording and more!)
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! App name is BatMan Settings Free
- Fully deodexed (framework can be chosen odex/deodex in aroma)
- Rom informations and logo inside settings
- LED indicator settings
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in the BatControl app (like header colors, qs colors and notification colors)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Knox stuff can be choosen in aroma
- Stock CRC7 Kernel or BatStock-Kernel(choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Sound Mod with lot improvements! (choose in aroma)
- Latest March Security Patch
- Many other features, can't list them all, please read changelog to see what changed over the time
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin (if you don't have odin, download it here), following this thread S8/S8+ TWRP until it works correctly (to access download mode, press bixby+volume down+power on while phone is turned off) (YOU HAVE TO BE ON 3.1.1-2 TWRP OR HIGHER TO SUPPOR THIS ROM)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host (You should have at least an Oreo bootloader/modem installed)
3. Now boot into TWRP by pressing bixby+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open BatMan Settings Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G95XF/FD/N:
V2.0.0 Final on Android File Host
Download via our Server (you need to be signed in)
Bootloader/Modems SM-G95XF/FD/N
CSC Selection V1.2.5
Useful Links:
Our new Grifo Development website
Telegram BatMan News Channel
Telegram BatMan-Rom Chat
Telegram Dark Knight Theme
Known Bugs:
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V12
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- TheFreak for his work as designer and his help with the website
- mwilky for his fingerprint after reboot mod, the colors control and other mods
- Asc1977 for a few mods I already used on SuperMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
BM Settings App on PlayStore
XDA:DevDB Information
BatMan-Rom SM-G95XF, ROM for the Samsung Galaxy S8
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/BatMan-Rom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V2.0.0
Stable Release Date: 2018-05-04
Created 2017-07-14
Last Updated 2018-05-25
Changelog:
BatMan-Rom V1.0.0
- Initial Release on XDA
BatMan-Rom V1.1.1
- Rebased on latest AQF7 release
- June security patch
- Fixed the gap in pulldown menu
- readded private mode(thanks to @mwilky for finding the right mount points for private mode! )
- added a switch in RC for immersive mode
- updated csc to AQF7
- added a switch for wake the device with the volume buttons
- fake system status to official
- removed camera mod, it didn't work anyway
- updated magisk to latest v13.1
- updated all kernels with AQF7 base
- updated supersu to v2.82 sr1
- made the rom compatible with s7/s7e edge devices
- added an option to control icon colors/progress bars etc
- added a custom music apk to be colored (thanks to @Therassaad)
- many more things, check out the rom
BatMan-Rom V1.2.0
- Rebased on latest AQGB release (I know AQH3 is out, but until samsung releases a new kernel source it normally takes a few weeks that's why this base is used for now)
- July security patch
- Added navbar icon colors @mwilky
- Added navbar to get colors from statusbar (as long as the app doesn't set a default color) @mwilky
- Added in "misc" batman settings to disable touchkey light (s7 only of course)
- Readded custom color selection for navbar in stock settings
- Removed a few camera mods which weren't working
- Updated CSC to AQGB, also added all CSC in OMX (including BTU)
- Updated all Kernels to latest source and ramdisk
- Updated SuperSU to 2.82 SR3
- Added a the S Power Planning feature (forward ported from galaxy j7 prime), choosable in aroma as a csc mod
- Updated OperaMax apk to not show as chinese apk, many people meant it's a trojan lol
- Updated adblocker host file
- Updated all included modems and bootloaders
- Added a stock kernel even for the s7, so you can choose stock there as well!
- Updated Magisk to latest V13.5 beta version
- Added modded camera into aroma @zeroprobe
- Added 100+ fonts apk into aroma
- Updated busybox to most recent version
- Updated dual speaker mod to most recent version
- Added VoLTE and wificalling into pulldown menu
- Reduced download size to 3GB only (hahahaha only 3GB )
BatMan-Rom V1.3.0
- Rebased on most recent AQH3 firmware update
- August security patch
- Added navbar height tweak @mwilky
- Added force expand notifications @thereassaad
- Updated all kernels to most recent source drop and linux version
- Updated magisk to V13.6
- Updated SuperSU to V2.82 SR3
- Added batman gif animations
- Fixed gif overlapping device informations
- Readded autostart manager in modded settings
- To disable the volume warning, there is now a switch in notification panel options to enable/disable it
- Fixed long press back not bringing up menu @mwilky )
- Removed OTA Updater. This services is outdated and not working anymore.
- Readded touchwiz double tab features! Double tap anywhere on launcher to do custom actions (the only thing which does not work yet is starting the torch light)
- Updated samsung music to most recent version with all the custom mods thanks to @thereassaad
- Fixed next alarm on lockscreen showing the wifi icon
- Fixed heads up display not working when switching in RC
- Added a new custom signal icon
- Edge lightning can now be customized! Choose a custom color OR if it should take the color from the app itself!
- Added alarm volume control to sound
- Fixed adaway app not being installed even if you selected adblocker
- Removed viper mods, since they can easy be outdated it's better to keep them outside. I hope people will go and visit the threads of the sound mods
- Updated included bootloader and modem to most recent version
- Updated csc to AQH3
- Added many new CSC mods, BUT BE AWARE, 5 SIGNAL in statusbar kills Wifi-Calling/VoLTE!
- Removed the last not working camera mod: video collage!
- Maybe some more things I already forgot, have fun!
BatMan-Rom V1.4.0
- Rebased on most recent AQI7 firmware update
- August security patch (there is no single september security patch released by samsung)
- This base fixes blueborne problems (which was samsungs main goal)
- Updated all kernels to most recent source drop and linux version (AQI7 for S8 and DQIC for S7)
- Updated magisk to V14.2
- Updated SuperSU to V2.82 SR5
- Added memory cleaner next to brightness slider
- Added listview animations thanks to @asc1977!
- Added a new telephony icon to romcontrol
- Added quickunlock thanks to @mwilky and @Grouxho
- Added Xposed V88.1 for magisk, why only magisk? Stock xposed can't be installed via an aroma script to-date, hoping rovo will change this in the future
- Updated all busybox to latest 1.27.1
- Updated adblocker
- Fixed lags in notification panel, for custom edge lightning you simply need to update the edge lightning service with samsung store!
- Fixed USB wakeup switch not working
- Updated launcher to support gestures even with latest update
- Updated included bootloader/modems for F/FD models
- Maybe some more things I already forgot again
BatMan-Rom V1.5.0
- Rebased on most recent AQK7 firmware update
- November Security patch included
- This base fixes krack problems (krack explained: Krack)
- Updated all kernels (AQK7)
- Updated Magisk to V14.5
- Updated Xposed to 88.2 (magisk version, aroma choosable)
- Updated Xposed Installer to 3.4
- Updated adblocker host file
- Updated bootloader/modem to AQK7
- Updated zeroprobes camera mod
- Stock camera does now only feature stock camera mods, for advanced camera mods please use the modded app (which includes almost all modes)
- Fix notification background image not sticking after a reboot
- Fix carrier label on pulldown overlapping with navbar
- Fix lag on pulldown, introduced by force expand notifications. THIS MOD HAS BEEN COMPLETELY KILLED
- Add qs panel number counts to romcontrol
- Removed most google apps from debloater, why: the zip file increases all the time, you can download the apps easily via playstore, also you have them installed as user apps then
- Add modded youtube to play background videos and watch videos without ads
- Add modded GBWhatsApp and GBInstagram thanks to the GB team!
- Moved some more bloatware related to Gear VR into Gear folder
- Added "edge panel" to debloat menu
- Update update-binary
- Added googles web view by default, so we don't need google chrome
- Busybox installer updated
BatMan-Rom V2.0.0 Final:
- Updated to CRC7 base (March update). I'm aware that CRD7 is out, but I already finished this base update while the other one rolled out...
- Reworked most mods from Nougat to Oreo, some are new, some I had to leave behind. You'll find out when visiting the romcontrol app
- Included an aroma choice to flash with odex or deodex framework (this is the ONLY change compared to the beta release). If you don't know anything about the odex/deodex issue, I suggest you to read up on that a bit! I talked a lot about it in here
- Updated magisk to latest 16.3 (16.4 magisk is causing issues sometimes)
- Updated included BL/CP to CRC7
- Updated modded camera
- Updated dual speaker sound mod
- Updated busybox
- Updated GBinstagram/GBwhatsapp
- Updated modded youtube
- Updated xposed to latest Oreo beta
- Updated modded samsung music app (thanks to @thereassaad )
- Updated all included kernels to CRC7 base
- Many thanks to @asc1977 and @mwilky who have helped me so much to get this update done! Without them this wouldn't have been possible with all those mods!
Useful posts and links
App on PlayStore:
Find my own BatMan app on PlayStore: BM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
TWRP links:
TWRP S8+ Thread
Official TWRP website for S8+
Bootloader and Modems:
SM-G955F/FD/N BL and CP (all models in one folder!)
SM-G955F/FD BL and CP
SM-G955N BL and CP
Magisk related Threads:
Magisk V13.2
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
BatStock-Kernel
Notorious Kernel
Roms made by me:
BatMan-Rom which you are currently on its thread
BatStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Thread about CSC:
Download latest CSC from CSC Selection V1.0
All CSC's ever released
How to donate:
Donate via PayPal.me
Donation via normal PayPal
Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader, modem and TWRP recovery. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G95XF/FD/N. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 835 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon (like a cloud) appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from batman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore BatMan control settings after a clean base update, why?
A: Backup for BatMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in BatMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Encryption does not work anymore on Nougat roms with TWRP installed, sorry to tell...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: There are some test version of Xposed on N, I don't recomend to install it!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent BatStock Kernel
3. Flash Magisk V13.3
4. Open Magiks Manager, go to settings
5. Enable MagiskHide, systemless hosts and systemless busybox
6. Reboot the phone and check safetynet!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: What to do when I can't login to snapchat?
A: Clean install the rom without root and login to your snapchat, save the app with titanium backup, flash back root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Questions about Kernels:
Q: I want to switch kernel, how?
A: We have systemless we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Hey guys, this isn't anything new, I just moved the BatMan thread into the criss cross development section as it's way more active in here :fingers-crossed: :good:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
spackeddie01 said:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Click to expand...
Click to collapse
Are you using a custom launcher? I assume it's due to this one!
ounerkouks said:
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
Click to expand...
Click to collapse
English, spanish, german, french and dutch should it be if I'm correct
sielhadi said:
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Look at the thread title, it says G95XF, which means G950F and G955F. I moved all my threads into s8/s8+ combined ones
i bought the super setting pro does it adequate with bat setting pro when it will be released
Sent from my SM-G950F using XDA-Developers Legacy app
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
you can find it in advanced settings
Palm Swipe to Capture not working!
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
hi, This icon from statusbar would be nice changed with AOSP style.
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
If you selected it in aroma and didn't install any other csc after the rom flash it is in advanced featurs
eranyanay said:
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
If you removed the bixby apks you can't control it anymore
Koehlix said:
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I suggest you to post your issues at the dolby atmos thread, as I'm not the author of that mod
TarekElsakka said:
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
Click to expand...
Click to collapse
That kernel version you mention is the stock kernel.
That feature definitly works. Tested just now. But you really need to start at the edge of the screen. If you just swipe over it it won't do anything.
I had to start swiping at the very beginning of the edge screen
Borfas said:
hi, This icon from statusbar would be nice changed with AOSP style.
View attachment 4212340
Click to expand...
Click to collapse
I see, don't know if that's so easy doable
RDDraco said:
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
Click to expand...
Click to collapse
If you just made a clean install, simply wait for a few days. Your phone is currently analyzing your usage and indexing the data and files you got on the sd and internal storage.
Also it you don't use the phone during the night, enable flight mode in order to get better battery (as it doesn't need to be connected all the time, maybe with bad receiption)
Sent from my BatMan powered SM-G955F
I suggest for clear sound and high volume: am3d (Download and install from magiks) and the original player in the app samsung store, now
enjoy with soundalive.... end edgelightning effect.
Installed it, everything is pretty much fine.
Only thing is V4A is not working i did a clean install, did the magisk update that works with it in the aroma installer, but when i turn it on nothing happens on my headset. Aswell on speaker.
Btw, the ''better camera quality'' mod is that zero's mod or should i still patch zeros mod on it?
Hi, i've worked on B396 stock rom , to give it more options :
- Multi user
- Call Recorder (native)
- hide navbar
- 4G icon
- 6 themes from Huawei mate10
- init.d support
- i forget ...
In aroma installer you can:
- Root systemless
- Xposed systemless
- get Viper4android systemless
- Choice No Gapps/microG/Official Gapps
- install usefull Xposed modules
- install extra apps ...
and more
CHANGELOGS:
2018/02/10 : v1.1
System Updated :
- add Twin/Clone app from huawei (read post #02 to correct use)
- add Cust support for PLK-L01 or PLK-AL10 models
Gapps Updated :
- GMS Core (services google play)
- Phonesky (Play store)
- Velvet (google now)
- Gmail2 (google mail)
- Latinime (google keyboard)
- talkback (Accessibility service)
- WebViewGoogle
Extra Updated:
- GPS_locker
- Firefox
Xposed Modules Updated:
- Pixel_NavBar
Others Updates:
- Install process (microG/Nothing) : will wipe dalvik +cache
INSTALL:
Wipe datas if comming from NOT emui ROM
Wipe Dalvik+cache if comming from emui ROM
If you want NOGAPPS or MicroG:
First: install ROM+included GAPPS, (no need to root etc ..) reboot and do the setup ...
SECOND: run Installer again (no need to flash the rom) just select your options...
MicroG users: read post #02 to set it correctly
first boot take 3mn, or 10mn with Xposed
Please update your device to B390 before install:
https://forum.xda-developers.com/honor-7/development/stock-b390-twrp-t3723635
Download :
http://www.mediafire.com/file/jdl903g69wbimqo/B396_Reloaded_Full_1.1.zip
Kernel updated to 3.10.108 (end of life)
http://www.mediafire.com/file/wgc44dx0khiafyb/Kernel_B396_reloaded_v2.1.zip/file
YOU MUST USE MAGISK v14 ONLY, another version will break GPS.
#################################################
DO NOT MIRROR MY LINK without my authorization
DO NOT POST/PUBLISH at any other place without my authorization
#################################################
microG config (it's a mess) and usage:
1/ active Xposed module to Allow signature spoofing
2/ open microG app : active google registration, then config UnifiedNLP
...reboot...
3/ create your google account
to use sync of contacts/calendar/gmail
1/ in settings/apps/calendar/authorizations : give all authorizations
2/ in settings/apps/contacts/authorizations : give authorizations (minimum: contact+phone)
3/ in settings/apps/Gmail/authorizations : give all authorizations
4/ check that synchro is activated
5/ in google account start synchro
6/ wait for sync .... can take time depend of your network speed.
Play store will get updated automatically to new version ... wait it ..
if any off theses apps don't work properly do :
1/ settings/apps/*your_app*/storage : wipe data and cache
2/ kill the app
3/ do authorization again ..
4/ restart the app
NOTE : new maps (February 2018) is not supported, use 9.67.xxx (November 2017) version insteed.
i have full workings : Playstore/Gmail/Maps,and my contacts/mails/calendar are synchronized, so i know it work
Twin/Clone app config and usage:
Setting / Twin App : On the app you want to clone:
- Actually: Whatsapp, facebook.katana, facebook.orca, Mega .
Add/remove (need root):
in system/emui/base/xml/hw_clone_app_list.xml
<?xml version="1.0" encoding="utf-8"?>
<!-- DTS2016080802881 shiyuanchang/00271386 20160822 created -->
<AppClone>
<package name="com.whatsapp"/>
<package name="com.facebook.katana"/>
<package name="com.facebook.orca"/>
<package name="mega.privacy.android.app"/>
</AppClone>
Exemple to add Twitter and remove facebook.orca:
Install any "package name viewer" app , and use it to see package name
for Twitter it is : com.twitter.android
<!-- DTS2016080802881 shiyuanchang/00271386 20160822 created -->
<AppClone>
<package name="com.whatsapp"/>
<package name="com.facebook.katana"/>
<package name="com.twitter.android"/>
<package name="mega.privacy.android.app"/>
</AppClone>
- Save the file
- go to settings/apps and select "settings" then "storage" and wipe datas
- now your Twin/Clone app list is updated with Twitter
now I install it, I hope I do not have any problems with the signal, like MM + D EMUI 4.1 by WBT v5.0 (B371), and I hope the battery keeps more like Stock B390
ilovemuzic said:
now I install it, I hope I do not have any problems with the signal, like MM + D EMUI 4.1 by WBT v5.0 (B371), and I hope the battery keeps more like Stock B390
Click to expand...
Click to collapse
You will tell me ... For good battery life i just enable SIM data's , and disable overs options like aggregation etc ..
- What is your provider and country ?
Speedo.thc said:
You will tell me ... For good battery life i just enable SIM data's , and disable overs options like aggregation etc ..
- What is your provider and country ?
Click to expand...
Click to collapse
Telekom Romania
Hey! i've just installed it but when i have to accept "terms and condition" i can't do it any solution?
tamasigerald said:
Hey! i've just installed it but when i have to accept "terms and condition" i can't do it any solution?
Click to expand...
Click to collapse
Please update your device to B390 before install
hi
i installed this rom.first boot is ok.but when i restart phone. it stuked in boot image.what should i do?
Hi, boot logo or bootanimation ?
boot animation
Xposed doesnt seem to work. Xposed installer says 'Installed, but not active'. When trying to install systemless framework, the installer app crashes.
Am I doing something wrong here or..?
EDIT: Tried few times to reflash the rom but every time after setting up the phone, if I reboot I will be stuck in bootloop.
Hi, you are the second to tell that, I will do test after tomorrow to try my setup, right now it was ok.
hi @Speedo.thc
thank you for your new rom
this rom support kang vip setting?
Heatti said:
Xposed doesnt seem to work. Xposed installer says 'Installed, but not active'. When trying to install systemless framework, the installer app crashes.
Am I doing something wrong here or..?
EDIT: Tried few times to reflash the rom but every time after setting up the phone, if I reboot I will be stuck in bootloop.
Click to expand...
Click to collapse
You must install the version I provided in aroma installer.
levolotion said:
hi @Speedo.thc
thank you for your new rom
this rom support kang vip setting?
Click to expand...
Click to collapse
Hi, not a Kangvip based, but many things from Kang can be done with xposed and modules I've selected.
Speedo.thc said:
You must install the version I provided in aroma installer.
Click to expand...
Click to collapse
I chose the Xposed option in aroma when flashing. After flashing the rom and setting up the phone, checked the xposed app and it was already inactive from the start.
Heatti said:
I chose the Xposed option in aroma when flashing. After flashing the rom and setting up the phone, checked the xposed app and it was already inactive from the start.
Click to expand...
Click to collapse
It's active only if you flash Magisk v14 , which is inside rom installation.
By order it must be :
1: Magisk
2: Xposed
Hi speedo, nice to see that you are devoloping for our nice device. I have tested all your roms but aktual i am returned to your mmkang 3.2, running as a good daily driver. Coming from it, is it possible to flash your rom with twrp, like your other roms?
Should I delete fingerprints before flashing?
Thank you. I am very curious to test it...
For next versions, it would be nice to have a dark theme, looking like oreo or nougat...
After installation, the google maps application does not start
Hi speedo,, i leave miui for this one, could i suggest you to add smart-e (better than floating control for me), and can you tell me how you hide navbar? Thanks.
░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▀▄ ▄▀▄ █▄░▄█
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▒▐█ █░█ █░█░█
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▀▄▄ ░▀░ ▀░░░▀
Key Features
Based on @foobar66 GoogleWiz ROM
NX Kernel
Samsung SoundAlive Dolby Atmos
Shell Script Advanced Features (SSAF) *See post #2
Updates will come in small service packs instead of a complete ROM update unless necessary
Samsung Gear might work out of the box
Removed some tweaks that I deemed useless.
Removed a few Google apps (Drive, Map, YouTube, etc) from the ROM, you can install them from Play Store instead
Emergency Launcher, UltraPowerSavingMode, SmartCapture, SmartSwitch, LiveWallpaper
Removed GoogleWiz's customizing script
Installation
Backup is always recommended
You should be able to dirty flash from stock/GoogleWiz ROM
You might not be able to boot, which is why 1. is important
Install any patch or cumulative update zip.
Adrenaline Experience
Some apps that I personally use and recommend:
SolidExplorer
SwiftBlack
Fluid Navigation Gestures
Download
*Feel free to mirror, however, monetizing the download link in any way is strictly prohibited.
Google Drive
Patches & Cumulative Update
Bootloader
Source
GITHUB: Shell Script Advanced Features
Credit
@foobar66
@SoLdieR9312
@Noxxxious
@xpirt
amirzaidi for Pixel Launcher
Shell Script Advanced Features
Everything that can be done in shell script shall be done in shell script.
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Enable Stereo Speaker
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Set big Cluster Max Freq
Set LITTLE Cluster Max Freq
Script OTA Self Update
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Code
Issues
TODO/Progress
Wiki
Credits
Changelog
v1.0 - The Late Santa [26 Dec 2018]
Initial Release.
v2.0 - WorstJet [13 Jan 2019]
Reverted Samsung Camera to stock
Samsung Gallery is back to the party
Added quite a lot of files that are related to VOLTE/VOWIFI (credit), you will need to flash CSC installer to install your CSC files
NX Kernel R19
Magisk v18.0
Almost up-to-date SSAF
Flashable Update Zip
[Patch] - Smaller fix, you need to install all patches according to the number, you do not need to reboot in between patches. (Flash 1.0 first, then 2.0, 3.0 ...)
[Cumulative Update] - Bigger update containing all the previous small patches.
WorstJet
-Nothing available as of now
Previous Version(s)
The Late Santa
[Patch 1.0] 26122018
Enabled navigation bar
Added Project WIPE by yc9559 @ CoolApk, default setting is set to [Balance]
Changed config to cfg for easier access
[Patch 2.0] 27122018
Added GearManagerStub.apk
Added Launcher from amirzaidi
[Patch 3.0] 27122018.2
Updated custom menu to include adblock and service disabler
[Patch 4.0] 30122018
Fixed permissions
Minor update to SSAF
Service disabler in SSAF will now run in complete silence
Enabled UHQ tile in csc
[Patch 5.0] 31122018
SSAF now able to set DNS properly
SSAF now able to change big cluster max freq
[Patch 6.0] 03012019
SSAF now able to grab dependencies from GitHub if any is missing
SSAF now able to change LITTLE cluster max freq
Minor fixes to powercfg
[Patch 7.0] 05012019
SSAF now able to enable stereo speaker
Thanks! Haven't been able to download the ROM you're basing yours as it always hangs for me with megaupload, will try yours as I have better luck with gdrive. Slds.
well stuck on android is starting
Android is starting and no navbar,even going for settings and reenable it
pbls said:
Android is starting and no navbar,even going for settings and reenable it
Click to expand...
Click to collapse
I left the navigation bar disabled in build.prop accidentally
Edit the last line in build.prop:
Code:
qemu.hw.mainkeys=1
to
Code:
qemu.hw.mainkeys=0
and reboot.
or use the custom menu to re-enable it then reboot
or edit the build.prop and reflash ROM
EDIT:
or flash the attached flashable patch zip
how do i install the rom?
well the navbar is back and still stuck at android is starting
ps: this rom doesnt have a launcher thats why i keep stuck at android is running
Is Volte vorking? Foos original rom hasn't.
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
the ROM doesn't have a launcher,you must go to the Google play to install one
pbls said:
the ROM doesn't have a launcher,you must go to the Google play to install one
Click to expand...
Click to collapse
Ah.. now I know why it doesn't boot.
navaskp said:
Is Volte vorking? Foos original rom hasn't.
Click to expand...
Click to collapse
It isn't working either
xtmzone said:
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
Click to expand...
Click to collapse
I'd refrain from adding 'mod' myself that requires to be redone every security update as it wastes time.
Feature will be added to the custom menu instead as that is portable, work across updates and even devices.
Everything that's doable in shell script shall be done in shell script.
ImbaWind said:
AdrenalineROM Custom Menu
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Click to expand...
Click to collapse
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
xxxPLETTIxxx said:
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
Click to expand...
Click to collapse
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
keyboard is not working for me
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Sure. Hope you can help.
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Same here,but loving the ROM nonetheless and I've installed so many
xxxPLETTIxxx said:
Sure. Hope you can help.
Click to expand...
Click to collapse
pbls said:
Same here,but loving the ROM nonetheless and I've installed so many
Click to expand...
Click to collapse
Code:
su
mount -o rw,remount /system
chmod 777 /system/bin/cfg
cfg
This should help
AT YOUR OWN RISK!!!
Requeriments (commom):
- Windows/Linux computer
- USB debugging enabled (Developer settings)
Linux users:
COMMON
Code:
adb push debloat_list.sh /data/local/tmp
adb push aapt_arm_pie /data/local/tmp
adb shell chmod 777 /data/local/tmp/debloat_list.sh
adb shell chmod 755 /data/local/tmp/aapt_arm_pie
NON-ROOT
Code:
adb shell /data/local/tmp/debloat_list.sh
ROOT
Code:
adb shell
su -l
/data/local/tmp/debloat_list.sh
(su -l opens a login shell as root on the android phone)
ROOT - REMOVE APPS - How to:
1. Download always the latest version available (attached below)
2. Disable any Magisk Module installed and reboot (IMPORTANT STEP, DO NOT SKIP IT)
3. Unpack and run debloat-remove.bat (run it at least twice!)
4. Enable Magisk Modules again
5. Done!
ROOT Notes:
- Before run the debloat script, you have a change to take a look on its "unwanted apps list " at \files\debloat_list.sh
- Root debloat script does not remove the bloatwares folders, instead, it moves them to a backup folder, located at /system/_debloat_backup
- /system/_debloat_backup stores all "removed" apps folders, and before you manually delete this folder (and if you want to), you have a chance to revert back the changes made by the script
- Updated bloatwares: They'll need to be uninstalled/disabled manually
NON-ROOT - UNINSTALL APPS ONLY - How to:
1. Download always the latest version available (attached below)
2. Unpack and run debloat-uninstall.bat (run it at least twice!)
3. Done!
NON-ROOT Notes:
- Before run the debloat script, you have a change to take a look on its "unwanted apps list " at \files\debloat_list.sh
- debloat_list.sh: Commented out lines (starting with #) will be ignored (their respective apps will not be uninstalled)
- Debloat script does not remove apps containers (apk files/folders)
- Updated bloatwares: They'll need to be uninstalled manually (Settings > Apps > "APP" > Uninstall/Deactivate)
Retrieving installed apps info (PACKAGE | APK LOCATION | LABEL):
1. Download v1.0_List_Installed_Apps_Info_By_Serajr.zip (attached below)
2. Unpack and run list_installed_apps_info.bat and wait a minute or two (ignore errors, if any)
3. installed-apps-info.txt file will be created
4. Done!
Special thanks:
- @hmy65 (Debloat list, used as base)
Enjoy it!
Changelog
v1.0 - 27/Sep/2020
- Initial release
v1.0.1 - 22/Oct/2020
- Added instructions for Linux users ( thanks @HemanthJabalpuri )
v1.1 - 02/Jan/2022
- Android 12 compatibility
Pics
SM-G985F, root version
serajr said:
v1.0.1 - 22/Oct/2020
- Added instructions for Linux users ( thanks @HemanthJabalpuri )
Click to expand...
Click to collapse
Not tested, but seems like will work great. But in requirements section, you should add Linux along with Windows.
Thanks.
Work like a magic. Thank you so much. Look so clean and minimal.
keaheng said:
Work like a magic. Thank you so much. Look so clean and minimal.
Click to expand...
Click to collapse
Thank you for the feedback :good:
Thanks and congrats for such a great work!
Is there any advantage to use the root script over a pm uninstall -k --user 0 command please? What's the difference
aacury said:
Thanks and congrats for such a great work!
Click to expand...
Click to collapse
Thank you mate
jojos38 said:
Is there any advantage to use the root script over a pm uninstall -k --user 0 command please? What's the difference
Click to expand...
Click to collapse
Root script version moves all the damn bloatwares to a single (and structured) folder. It allows you to revert back changes or free up internal memory space by deleting that folder, however, you'll need to run the script after every system update.
Non-root (pm uninstall -k --user 0) uninstalls the apps, keeping all the data, and the changes may survive the system update.
serajr said:
Thank you mate
Root script version moves all the damn bloatwares to a single (and structured) folder. It allows you to revert back changes or free up internal memory space by deleting that folder, however, you'll need to run the script after every system update.
Non-root (pm uninstall -k --user 0) uninstalls the apps, keeping all the data, and the changes may survive the system update.
Click to expand...
Click to collapse
Thank you!
Hi, a question, if i run v1.0_List_Installed_Apps_Info_By_Serajr.zip and create a list txt, when i run a debloat, what changes or which apps debloat and which apps not?, how i change which apps not debloat?
sorry for my bad english!
Taz2016 said:
Hi, a question, if i run v1.0_List_Installed_Apps_Info_By_Serajr.zip and create a list txt, when i run a debloat, what changes or which apps debloat and which apps not?, how i change which apps not debloat?
sorry for my bad english!
Click to expand...
Click to collapse
Both debloat methods (root/non-root) use a sh file (debloat_list.sh), so have a look into it (as well as reading the Notes in the first post).
I just want to make sure the script can be used on Samsung S20 FE phone? Thanks
Gr8man001 said:
I just want to make sure the script can be used on Samsung S20 FE phone? Thanks
Click to expand...
Click to collapse
Sure it can!
Omg dude, I remember you from Xperia Mini days.
Your project was the xperia launcher mod right?
Nice work here.
agentsandy007 said:
Omg dude, I remember you from Xperia Mini days.
Your project was the xperia launcher mod right?
Nice work here.
Click to expand...
Click to collapse
Yeah mate :highfive:
I'm currently working on an xposed module to tweak samsung stock launcher ( as stated here ). I intend to release something on this asap. Stay tuned.
Thank you!
application preceded by the # sign will not be deleted?
and where is the ## sign?
---------- Post added at 03:38 PM ---------- Previous post was at 03:38 PM ----------
Hello
can i keep certain apps? or do i either remove all or reinstall all?
shaker74 said:
...
and where is the ## sign?
Click to expand...
Click to collapse
debloat_list.sh (read up post #12 just above)
Gasser.Atef said:
can i keep certain apps? or do i either remove all or reinstall all?
Click to expand...
Click to collapse
Sure you can (by editing debloat_list.sh).
serajr said:
debloat_list.sh (read up post #12 just above)
Sure you can (by editing debloat_list.sh).
Click to expand...
Click to collapse
To be honest OP is not noob friendly tho.
Like I didn't know how to open debloat_list.sh and used notepad and it worked. Not too many would know that?
Anyways I just blindy went through your script and only things I had to reinstall are gmail, drive and sammy pay.
Tested with:
Code:
ArrowOS Version: arrow-11.0
ArrowOS Build Type: OFFICIAL
ArrowOS Build Variant: VANILLA
Device Name: POCO X3 NFC (surya)
This modification makes use of the addon.d survival mechanism found in almost all (if not all) custom ROMs, which is leading back to CyanogenMod, and allows the installation of Bromite SystemWebView with automatic reinstatement after a manual or OTA system update.
Create the folder /sdcard/Android/addon.d/webview and download Bromite SystemWebView to that location.
Place the following script with the name 51-webview.sh into /system/addon.d and make it executable (755), which can either be done from a root shell or through recovery after mounting /system with read-write access:
Code:
#!/sbin/sh
#
# ADDOND_VERSION=2
#
################################
# Restore Bromite SystemWeview #
################################
case "$1" in
post-restore)
AD="/sdcard/Android/addon.d"
D="/product/app/webview/webview.apk"
mount /dev/block/mapper/product /product 2> $AD/mount_error.log
[ -f $D ] && cp $AD/webview/arm64_SystemWebView.apk $D 2> $AD/webview_error.log
umount /product
;;
esac
That's it, either reinstall the current version of the used custom ROM through recovery or make an OTA update.
Now the catch with this was, that for some unknown reasons, addon.d scripts see the device mapping different than from a running system or recovery, please see this issue for details.
ArrowOS 11 has webview.apk in /product/app/webview/, but this may be different in other ROMs. In that case, simply have a look and change the destination ($D) in the script accordingly.
The script is safe to use as nothing gets modified if the webview file is not already found at the given destination.
To uninstall this modification, simply remove the file /system/addon.d/51-webview.sh.
You can also temporarily disable this modification by removing/renaming arm64_SystemWebView.apk from/in /sdcard/Android/addon.d/webview and everything gets back to default with the next system update.
BTW @unixandria's Webview Switcher Magisk Module is not working on Android 11 (yet), which is why I was looking into creating this mod in the first place. Please have a look at this issue in the Webview Switcher GitHub Repo.
magisk webview manager for android 11
https://dl.androidacy.com/wp-content/downloads/Magisk-Modules/WebviewSwitcher/WebviewManager_v8_0_1.zip
pan.rozowy said:
magisk webview manager for android 11
https://dl.androidacy.com/wp-content/downloads/Magisk-Modules/WebviewSwitcher/WebviewManager_v8_0_1.zip
Click to expand...
Click to collapse
Yes, already seen, but didn't try (because my method works as well). Any experience with the new Magisk module yet?
Master One said:
Yes, already seen, but didn't try (because my method works as well). Any experience with the new Magisk module yet?
Click to expand...
Click to collapse
it works ok
My "webview.apk" shows up under "/system/product/app/webview" as well as "/product/app/webview". I think "/system/product" is just a link to "/product".
If I can figure out the mount command for "/product", I'm going to try this.
Thanks for this information.
mangokm40 said:
My "webview.apk" shows up under "/system/product/app/webview" as well as "/product/app/webview". I think "/system/product" is just a link to "/product".
If I can figure out the mount command for "/product", I'm going to try this.
Thanks for this information.
Click to expand...
Click to collapse
Indeed, that file system path can be different depending on ROM, but you can easily find out yourself and simply change the location the shown script.
Master One said:
Yes, already seen, but didn't try (because my method works as well). Any experience with the new Magisk module yet?
Click to expand...
Click to collapse
Can we use bromit webview for android 7? After debloat google's.
I installed it but webview implemention in developer option is empty
pan.rozowy said:
it works ok
Click to expand...
Click to collapse
Source? Or, do you mind elaborate the "how to" process?
Before, i use mi8 with pixelexperience pie, which is easy to convert user app to system app. Now, i upgrade it to A11, webview folder scatter all across subfolder. I dont know which one should be replaced by new webview.
At first is good job
I use lineageos official
And is it possible to auto create oat too?
Akbar KanColle said:
And is it possible to auto create oat too?
Click to expand...
Click to collapse
Not sure what you mean, but this method can be adapted to whatever is needed to be restored.