Related
Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to download mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
sthetix said:
Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to recovery mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
Click to expand...
Click to collapse
btw volume down+home+power button is called download mode. recovery mode is different. And also your tutorial mentions xposed uninstaller. how to use uninstaller if phone bootloops and we don't have twrp recovery? :/
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
its the 6th time am getting into bootloop
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
hey mate, any luck with rooting on 6.0.1?
I got the red recovery is not se enforcing error and it gets stuck there... to make matters worse sammobile is down today for maintenance and I cant download a stock firmware for now...
cant find other threads about rooting the A800F please let me know if there is any... thanks...
prince Niks said:
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
Click to expand...
Click to collapse
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
hey there, does this xposed work on A800F with 6.0.1 marshmallow?
or is it only for lollipop?
thanks
great need of help from you guys...
i have a samsung a8(sm a800f vietnam, android 5.0.0) from my aunt but she had this phone for almost 2 years and gave it to me. i wanted to make it faster and maybe have an android 6.0.0 on it(if possible). im a super noob on this process but i already tried this thread and ([ROOT][TWRP][Xposed][New] Samsung Galaxy A8 (A800F/A800I) on 6.0.0)<< this too. hope you guys could help me i would very well appreciate it.
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
adb sideload yourdownloaddirectory/magisk-v16.0.zip
Click to expand...
Click to collapse
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Is this guide for Nougat or Oreo?
AK2H said:
Is this guide for Nougat or Oreo?
Click to expand...
Click to collapse
ah yeah sorry, this tutorial is for Nougat version.
have not try oreo because still not released for my country.
Can I still use fingerprint to unlock the screen when rooting this way?
leo31 said:
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Click to expand...
Click to collapse
Do I have to perform steps 1-8 if I'm already in Nougat?
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
simple_s said:
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
Click to expand...
Click to collapse
It's works fine.
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F from stock to custom ROM
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F/grandprimevelte from stock to custom ROM
This detailed step-by-step guide helps you transform your Samsung Galaxy Grand Prime VE/LTE/531F to a powerful one with a custom Android 5.1.1.
Make sure your phone is SM-G531F before going further : in Android, go to Settings -> About -> Check model is G-531F.
AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
If not, quit this tutorial.
### Phone is reset and you can't access Android ? Shutdown phone, start in Recovery Mode (Hold Power + Home + Volume+) until you see Samsung logo and release buttons.
### In the recovery, on the 2nd line, look at the right part of the string after the . : G531FXXU1APG2 in my case, the first letters show G531F. It's good.
### AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
### If it is another model, quit this tutorial.
CHANGELOG ------------------------
v2. Enhenced FRP Lock bypass
v1. Initial release for Android 5.1.1
1) DOWNLOAD ---------------------
- djibe Galaxy Grand Prime VE/G531F pack v1 : http://bit.ly/djibe-grandprimeve-g531f-v1
(contains preconfigured Odin 3.13.1 + Samsung drivers + TWRP3.0.2-0 unofficial recovery + DeviceID app).
Unzip files from my pack.
+ ROM CS-Rom 3.2 (Android 5.1.1) : https://forum.xda-developers.com/grand-prime/general/g531f-galaxy-grand-prime-custom-stock-t3683569
Download from : http://bit.ly/grand-prime-csrom32
+ a microSD card. Copy ROM and deviceID.apk file on microSD card (FAT32 format) and insert it in phone.
+ Charge phone to 100 %
2) BACKUP DATA -------------------
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
3) FLASH TWRP3.0 RECOVERY ----------------
Shut down phone.
Boot in Recovery mode : Hold Home + Power + Volume+ until you see Samsung logo and release buttons.
Navigate with volume buttons to go over wipe data/factory reset menu. Confirm with Power.
Confirm again with yes using same buttons.
Shutdown phone.
Boot in Download Mode : hold Home + Power + Volume- until you see the download mode screen and release.
Confirm with Volume+.
Look at the FRP Lock line (5th line). If FRP lock is off, follow these instructions.
### If FRP Lock is on, move to the chapter below : 3bis)
Connect phone in USB, wait for bootloader drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify Auto Reboot and Re-Partition are NOT ticked while F. Reset Time is ticked.
On the right panel -> in AP menu -> select twrp-3.0.2-0-grandprimevelte.img.tar included in my pack.
### Don't use other menus like BL, CP or CSC (I desactivated them but we never know).
### Warranty will be Void after next click ###
Click Start.
Power Off phone when PASS! green message appears : hold Power + Home + Volume- until phone is shut.
3bis) Reset internal memory to bypass Google FRP lock. ONLY IF FRP LOCK IS ON in bootloader mode
If FRP lock is on, follow this chapter.
Boot in recovery mode (Hold Power + Home + Volume+ and release when Samsung logo is appears).
Use volume buttons to select Wipe data/factory reset, confirm with Power button.
Use volume buttons to select Yes -- delete all user data, confirm with Power button.
Then select Power down.
Go back to step 3.
### If it is still not working, follow next chapter 3ter).
3ter) Factory reset is not enough to remove FRP Lock
Go to SamMobile.com and create an account (Join button): https://www.sammobile.com/join/
Select the FREE join, complete registration.
Confirm registration by clicking on the verification email.
Now visite this page : https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531F/
Select your corresponding country.
Now there are many versions for your country : look in the PDA column for the ones corresponding to your Baseband version you noted earlier (G531FXXU1APG2 in my case).
Preferably chose the one independant from a telecom operator, click on this line.
Then download the firmware, it's huge so be patient.
You then have a zip file on your PC. Unzip it 1 time (using 7-zip or other tool) to keep the file named like : G531FXXU1APG2_G531FOXX1APG2_G531FXXU1APG2_HOME.tar.md5
Start phone in recovery mode again, connect it to PC and Launch Odin.exe.
In AP, set this brand new ".tar.md5".
Wait for Odin to control md5 signature.
Then flash it. Be patient, all the partitions of the phone are being reset.
When Odin green success message appears, disconnect from PC, shut phone down by holding Power + Home + Volume-.
Now start phone in Download mode right away, FRP Lock line should be OFF.
Go back to step 3) at this line : "Connect phone in USB, wait for bootloader drivers installation.".
4) FLASH CUSTOM ROM
Start phone in recovery mode
TWRP is launching and reboots.
Check never show this screen during boot again and Swipe to Allow Modifications on first TWRP launch.
Go to Wipe menu -> Advanced Wipe : check Dalvik/ ART Cache, cache, system, Data and Internal Storage partitions.
Then Swipe to Wipe and wait for operations pending.
Go back to TWRP Home menu. Then tap on Install -> choose CSR*.zip
### If you don't see the files, tap on Select Storage and make sure Micro SDCard is active
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 10 minutes.
5) ROOT ACCESS
The ROM has SuperSU preinstalled so no extra work to do.
6) CALIBRATE BATTERY
In Google Play Store, download App Battery Calibration (from IMobS Ltd).
Launch the App.
Confirm root acces.
Plug tab and wait till charge hits 100%, then hit BATTERY CALIBRATION and unplug it.
You can use GPS Status & Toolbox app for faster GPS fix.
7) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
In Android, go to Settings -> Security and activate the Unknow sources
Now use the built in File explorer app to install the deviceID app from you microSD card.
Install it, launch it.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to : https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks : @adiJ5FN
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
sashokmc said:
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
Click to expand...
Click to collapse
Hi, root is built-in the ROM.
With what app the root is failing ?
djibe89 said:
Hi, root is built-in the ROM.
With what app the root is failing ?
Click to expand...
Click to collapse
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
sashokmc said:
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
Click to expand...
Click to collapse
Hi,
so you are trying to root an official firmware isn't it ?
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
TheGiovan said:
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
Click to expand...
Click to collapse
True, happily I kept it in case of crash.
http://bit.ly/grand-prime-csrom32
Enjoy
Hi guys, don't hesitate to report errors in my tutorial.
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
estemanito said:
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
Click to expand...
Click to collapse
Hi,
Sincerely I didn't try to access recovery again.
At least you can log to a phone where you don't know the original owner.
Sorry for that.
Looked up for newer packages for 531f.
This tutorial is up to date.
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Hi, no ROM is available for 531f, except the one I cite in this tuto.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Oooooops.
LineaOS 13 is available but marked as unstable : https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
However users say it is pretty stable for a daily usage.
Read carefully the manual.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Latest Official Firmware with root (tutos available)
Optimized it myself by removing all crappy software pre-installed and some unnecessary services
Set Nova Launcher as default since TouchWiz is laggy asf
Updated
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
ShakthiNandan said:
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
Click to expand...
Click to collapse
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
djibe89 said:
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
Click to expand...
Click to collapse
oops, ok
the battery life with this rom is 10 times better than the lineage rom and even the stock rom.
I'll stick with this rom
Awesome work.
hi all,
i wanted to install the miui on my xiaomi mi8 phone.
i already had installed the twrp software. i folowed these steps:
Select ‘Wipe‘ from the TWRP main menu and do a ‘wipe to Factory Reset’ on the bottom of the screen.
└ Note: This will factory reset your device. Skip this step if you don’t want to factory reset your device, that is, if you are already on MIUI 10 update.
Tap on the Wipe button again, and now tab on Format data button. Type yes on the next screen and then hit the enter key to confirm and format the data partition.
On the TWRP main menu, tap on ‘Install‘ and select the MIUI 10 update file that you transferred to your device above. After selecting the .zip file, do ‘Swipe to Confirm Flash’ on the bottom of the screen to begin the custom ROM installation process. This may take some time.
Once your ROM is successfully flashed, you’ll see ‘Wipe cache/dalvik‘ option, select it and then do ‘Swipe to wipe’ on the bottom of the screen.
Install lazyflasher file too the same way.
Tap on the ‘Reboot System’ button to restart the device. Done!
found here
https://www.theandroidsoul.com/download-miui-10/
but when I do this I end up booting it back to the twrp instead of miui. what am i doing wrong ?
thx
Bauke
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
Ultra noob
lol!
can't work.
my g8x is Unlock BootLoader And Root with 20e ca op
@[email protected]
Could you use like Mega GDrive to mirror TWTP because MediaFire link is dead.
There is a fixed version by mr zhu on telegram v50 group. Search the notes.
siulmagic said:
There is a fixed version by mr zhu on telegram v50 group. Search the notes.
Click to expand...
Click to collapse
Which one is it? Twrpg8 or korean beta
Search channel for twrp-installer-v3.3.1-g8x-ab
siulmagic said:
Search channel for twrp-installer-v3.3.1-g8x-ab
Click to expand...
Click to collapse
AFter format data and factory reset and flashing dm verity it bootloops
Awesomeslayerg said:
AFter format data and factory reset and flashing dm verity it bootloops
Click to expand...
Click to collapse
you have to flash twrp with magisk manager while in android, then magisk again while in android without rebooting, then you boot to twrp and flash disable dm verity, else you will have a broken boot.img
Ive done that still bootloops USA Version.
@[email protected], can you please compile OrangeFox recovery for LG G8x?
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
Twrp file has been removed please i want link to download twrp anyone help me i want link to download twrp for lg g8x
Cyrus05 said:
Twrp file has been removed please i want link to download twrp anyone help me i want link to download twrp for lg g8x
Click to expand...
Click to collapse
Purposely removed since expected perfection is not yet attained with that. Be in touch with the telegram group so that you may be updated regarding the development of the bl unlock, rooting and further custom ROM for the LG G8X...
LG Mobiles India 🇮🇳
Political Discussion, Obscene material/words, Selling, Fraudulent link posting will lead to Ban SHARING COPYRIGHT CONTENT & PIRACY NOT ALLOWED, it leads to REPORT & BLOCK Photography Group: @lgg8xphotography OT Group: @LG_G8X_OffTopic
t.me
Join the party
Can someone provide me with their LG G8X G850UM dump because my device is in a kernal panic and tells me to enter sahara mode?
Can't get to fastboot or recovery.
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
twrp works great on my g8x except I have no touch screen capabilities in twrp recovery....i have been using a wireless mouse to man the buttons. Anything i can do to regain touch features?
#Rooty_Mikes# said:
twrp works great on my g8x except I have no touch screen capabilities in twrp recovery....i have been using a wireless mouse to man the buttons. Anything i can do to regain touch features?
Click to expand...
Click to collapse
U need to use button combo to enter the recovery. And touch will work
[email protected] said:
U need to use button combo to enter the recovery. And touch will work
Click to expand...
Click to collapse
I tried for an hour to get the button combo right and couldn't figure it out. Im coming from Samsung and varients and Lg is a new world to me. Whats the bu
[email protected] said:
U need to use button combo to enter the recovery. And touch will work
Click to expand...
Click to collapse
Was alittle trickie with the factory reset screen but i figured it out, thank you very much
Any update?
Reupload files please.
LexxiHI said:
Any update?
Reupload files please.
Click to expand...
Click to collapse
What do you need?
Latest working TRWP for LG G8X