1.
Black shark2(only)
H0 : Download this firmware mp3
H0_EEA : Download this firmware mp3
rename "update.zip" then put it "ota" Directory in your phone(if you don't have this directory, make it)
if you find step bs2 pro downgrade, see this link
2. Then dial this from your phone
Code: *#*#1027#*#*
3. push "local update"
4. If it done, reboot your phone
5. Your phone enter recovery that requires factory reset. therefore, proceed factory reset your phone
6. wait for reboot
Won't this break the sensors?
batuken said:
Won't this break the sensors?
Click to expand...
Click to collapse
which sensor?
ripiad said:
which sensor?
Click to expand...
Click to collapse
Proximity and accelorometer sensors. I've just tried it and it didn't break them. Thanks for this.
ripiad said:
Black shark2 pro
Download this firmware mp2 and rename update zip. - thank you for KM7
I'm not sure if this is going to flash probably this way on BS 2 Pro, as this contain extracted partitions and there is a flash script 'flash_all.bat' which I made to flash those partitions.
So 'flash_all.bat' should be executed to flash this.
Click to expand...
Click to collapse
Thanks for this thread this will make it easier for people to understand.
ripiad said:
1.
Black shark2
H0 : Download this firmware mp3
H0_EEA : Download this firmware mp6
then up it "ota" Directory in your phone(if you don't have this directory, make it)
Black shark2 pro
Download this firmware mp2 and rename update zip. - thank you for KM7
then up it "ota" Directory in your phone(if you don't have this directory, make it)
2. Then dial this from your phone
Code: *#*#1027#*#*
3. push "local update"
4. If it done, reboot your phone
5. Your phone enter recovery that requires factory reset. therefore, proceed factory reset your phone
6. wait for reboot
Click to expand...
Click to collapse
Is there by any way I can get the navigation buttons at the bottom as like Android 10 or earlier than 9? the gesture based Android 9 is annoying and not able to lock the background app as we do on other android systems.
spikywits said:
Is there by any way I can get the navigation buttons at the bottom as like Android 10 or earlier than 9? the gesture based Android 9 is annoying and not able to lock the background app as we do on other android systems.
Click to expand...
Click to collapse
There are may bugs in joyui11.
Navigation buttom array can reverse in fullscreen display which located settings. (select mirror button)
Lock the background app is possible. view recent app(press home button or slide bottom up) and long press app what you want to lock.
Then, you can see lock icon
ripiad said:
There are may bugs in joyui11.
Navigation buttom array can reverse in fullscreen display which located settings. (select mirror button)
Lock the background app is possible. view recent app(press home button or slide bottom up) and long press app what you want to lock.
Then, you can see lock icon
Click to expand...
Click to collapse
Sorry. I forgot to mention - I need to do this for stock android 9 on BS2. Once I downgrade from 10 to 9.
The older joy ui navigation menu sucks. It offers only gesture navigation and no option to lock apps. There is no 3 button navigation like other android platforms.
spikywits said:
Sorry. I forgot to mention - I need to do this for stock android 9 on BS2. Once I downgrade from 10 to 9.
The older joy ui navigation menu sucks. It offers only gesture navigation and no option to lock apps. There is no 3 button navigation like other android platforms.
Click to expand...
Click to collapse
how about using this? using adb.
adb shell settings put secure sysui_nav_bar "space,recent;home;back,space"
" "<- you can change this order
caution : when you reboot your phone, it go back previous
ripiad said:
how about using this? using adb.
adb shell settings put secure sysui_nav_bar "space,recent;home;back,space"
" "<- you can change this order
caution : when you reboot your phone, it go back previous
Click to expand...
Click to collapse
Thanks for the trick. I think there must be a way to persist this setting.
If I remember correctly, there are apps on store to change dpi on non rooted phone, which runs some adb commands to change the dpi value and make it to persist across reboot.
or using fluid navigation gestures app
https://play.google.com/store/apps/details?id=com.fb.fluid&hl=en
2. Then dial this from your phone
Code: *#*#1027#*#*
Click to expand...
Click to collapse
This code is not working on my device skw-h0. Any help would be appreciated.
spikywits said:
This code is not working on my device skw-h0. Any help would be appreciated.
Click to expand...
Click to collapse
Did you use 3rd party dialer?
this method based on google dialer(require default dialer)
ripiad said:
Did you use 3rd party dialer?
this method based on google dialer(require basic dialer)
Click to expand...
Click to collapse
I use the stock dialer and it the default one, although I have truecaller installed along with.
Regardless, I managed to fix the issue.
I did the following:
Code:
adb reboot recovery
wipe/factory reset
with nothing installed, dialed *#*#1027#*#* and got the ota update app to popup.( I had the dpi set to lower than stock before reset, not sure that could be a reason for incompatibilities. )
Thanks, I will come back if I get into issues again with the downgrade.
spikywits said:
I use the stock dialer and it the default one, although I have truecaller installed along with.
Regardless, I managed to fix the issue.
I did the following:
Code:
adb reboot recovery
wipe/factory reset
with nothing installed, dialed *#*#1027#*#* and got the ota update app to popup.( I had the dpi set to lower than stock before reset, not sure that could be a reason for incompatibilities. )
Thanks, I will come back if I get into issues again with the downgrade.
Click to expand...
Click to collapse
I think truecaller make this issue.
additional dialer caused this situation
ripiad said:
I think truecaller make this issue.
additional dialer caused this situation
Click to expand...
Click to collapse
I don't think truecaller cause this.
I successfully downgraded from android 10 to 9. Installed truecaller and tested the dial code, it instantly popsup the update software.
Thanks for documenting the steps. Infact, I used the updated ota image from KM7 thread - SKYW2003090OS00MP6.
I will work on to root this device now and keep it on 9 forever. No more miui based Android 10
Update:
warning: flashing SKYW2003090OS00MP6 directly broke my sensors.
Had to flash the MP3 update.zip in the opening post to keep the sensors working. Thanks for the zip.
spikywits said:
Is there by any way I can get the navigation buttons at the bottom as like Android 10 or earlier than 9? the gesture based Android 9 is annoying and not able to lock the background app as we do on other android systems.
Click to expand...
Click to collapse
This can be done by turning off 'Swipe up on Home button' gesture, in Settings > System > Gestures.
spikywits said:
I don't think truecaller cause this.
I successfully downgraded from android 10 to 9. Installed truecaller and tested the dial code, it instantly popsup the update software.
Thanks for documenting the steps. Infact, I used the updated ota image from KM7 thread - SKYW2003090OS00MP6.
I will work on to root this device now and keep it on 9 forever. No more miui based Android 10
Update:
warning: flashing SKYW2003090OS00MP6 directly broke my sensors.
Had to flash the MP3 update.zip in the opening post to keep the sensors working. Thanks for the zip.
Click to expand...
Click to collapse
KM7 thread - SKYW2003090OS00MP6. is not OS00 firmware. that's OS01 firmware. Because I'm sharing this files first.
Today. I could get SKYW2003090OS00MP6 factory firmware(Korea ver.) so I'll modify it.
ripiad said:
1.
Black shark2
H0 : Download this firmware mp6
H0_EEA : Download this firmware mp6
then up it "ota" Directory in your phone(if you don't have this directory, make it)
Black shark2 pro
Download this firmware mp2 and rename update zip. - thank you for KM7
then up it "ota" Directory in your phone(if you don't have this directory, make it)
2. Then dial this from your phone
Code: *#*#1027#*#*
3. push "local update"
4. If it done, reboot your phone
5. Your phone enter recovery that requires factory reset. therefore, proceed factory reset your phone
6. wait for reboot
Click to expand...
Click to collapse
normal work on the black shark 2 pro DLT-H0?
my version is DLTR2004231OS00MQ0
I click on local update and nothing happens and non-local update when I click appears on the following message.
the list of update packages update / package_list does not exist
Related
For those that don't know, here's how to enable Power saver mode on the vzw model.
You need:
Root
Root browser/ root explorer/ etc.
Navigate to system/ customize/ CID/ Default.xml. scroll about 1/3 of the way down until you find "def_hide_ui_powersaver" >1</item<item> and change value to "0".
Reboot device, then go to home screen, long press to add widget, select shortcuts, then down to power saver. This will put a shortcut to the power saver menu that is hidden from us.
Note that you must mount R/W or the edit will not work. This will not enable the quick setting or for it to show up in the regular power options menu but this will work for now.
Good luck
Thanks to aer0zer0 for pointing me in the right direction.
I can verify that this can also be enabled on unrooted devices as well. Credit goes to user l7777 in this post: http://forum.xda-developers.com/verizon-htc-10/help/verizon-version-missing-options-t3376634.
For the powersaver mode, try this from a computer with working ADB
Code:
Code:
adb shell "settings list secure | grep power"
If it returns something that looks like this
Code:
Code:
hide_ui_user_powersaver=1
Then try
Code:
Code:
adb shell "settings put secure hide_ui_user_powersaver 0"
This does not require root if done from a computer. It will require root if done from a terminal on the device. This is what works on an M9 running Marshmallow. It may or may not work on the 10. You can also try
Code:
Code:
adb shell "settings list secure"
To get a list of all the settings.
Click to expand...
Click to collapse
I had to restart my phone after making the change in ADB. The only thing that doesn't seem to work correctly is when I click on the Battery Saver Mode to edit the settings, I will receive an error message. The Battery Saver Mode will turn on and off with no issue.
Must have missed that one. I went through that post a couple days ago. Guess this will work for those that can't or don't know how to setup and use adb
Sent from my HTC6545LVW using Tapatalk
Evocm7 said:
For those that don't know, here's how to enable Power saver mode on the vzw model.
You need:
Root
Root browser/ root explorer/ etc.
Navigate to system/ customize/ CID/ Default.xml. scroll about 1/3 of the way down until you find "def_hide_ui_powersaver" >1</item<item> and change value to "0".
Reboot device, then go to home screen, long press to add widget, select shortcuts, then down to power saver. This will put a shortcut to the power saver menu that is hidden from us.
Note that you must mount R/W or the edit will not work. This will not enable the quick setting or for it to show up in the regular power options menu but this will work for now.
Good luck
Thanks to aer0zer0 for pointing me in the right direction.
Click to expand...
Click to collapse
If it is like the M9 on marshmallow, after making that edit, if you factory reset it, the menu option should appear in the standard menu. its alot easier to either put it in as a shortcut, or use xtended settings, and add it to the power menu, or gravity box, and add custom quicksetting tiles (1 of which being battery, it will also show battery temp and mAh remaining).
Once we get a deodexed based, or even a stock odex flash, we can make those edits prior to flash and it will be in the menu as normal
edit, i also believe if you edit the next line (120) def_hide_ui_user_powersaver and set it to 0, this is what will enable the menu on factory reset
Note that this survives reboot and/or power recycle. Using the adb approach for unrooted handsets, got it working on both my own and a test device.
UPDATE: So far as I can tell, the latest OTA to 1.19.605.22 breaks this ability.
hgoldner said:
Note that this survives reboot and/or power recycle. Using the adb approach for unrooted handsets, got it working on both my own and a test device.
UPDATE: So far as I can tell, the latest OTA to 1.19.605.22 breaks this ability.
Click to expand...
Click to collapse
Can confirm that the latest update definitely does break this ability (no root). =(
im_high_tech said:
Can confirm that the latest update definitely does break this ability (no root). =(
Click to expand...
Click to collapse
I think the only way to do this is to write to \system; so for those who don't want to flash a custom ROM or write to \system, it's out of reach for now.
And especially galling because the 10's on all the other carriers have the feature. Verizon kills it.
@andybones has it in the stock deodex base, but if you are working off of the odex base, the easiest way is probably gravitybox, and using the QS tile to toggle it (still requires root). Just make sure you are using systemless xposed to not touch the system partition as @hgoldner pointed out, if you need it.
by stock base, i mean OTA to 1.19.605.22
Battery Saver Mode Settings
You can change the power saver mode settings if you install the apk from apk mirror http://www.apkmirror.com/apk/htc-corporation/power/
klarthur said:
I can verify that this can also be enabled on unrooted devices as well. Credit goes to user l7777 in this post: http://forum.xda-developers.com/verizon-htc-10/help/verizon-version-missing-options-t3376634.
I had to restart my phone after making the change in ADB. The only thing that doesn't seem to work correctly is when I click on the Battery Saver Mode to edit the settings, I will receive an error message. The Battery Saver Mode will turn on and off with no issue.
Click to expand...
Click to collapse
This modification can be done using Magisk, without editing /system. You need to cache-mount the edited default.xml using Magisk, and Magisk mount the patched SystemUI.apk and HtcPowerManager.apk from @andybones' deodexed stock ROM. HUUUGE thanks to @Captain_Throwback for helping me figure this out and tolerating all-too-frequent stupid mistakes getting to this point, and, of course, none of this would be possible without the amazing efforts of @topjohnwu in creating Magisk in the first place.
I will post detailed instructions if someone is interested.
jackebuehner said:
You can change the power saver mode settings if you install the apk from apk mirror http://www.apkmirror.com/apk/htc-corporation/power/
Click to expand...
Click to collapse
I just tried installing this on my stock, non-rooted Verizon HTC 10 and it didn't give me any new options for power saver mode. I installed the most recent version from apk mirror and then rebooted. Everything looks the same. I'm on version 3.057.92923
Sent from my HTC6545LVW using Tapatalk
Chewieez said:
I just tried installing this on my stock, non-rooted Verizon HTC 10 and it didn't give me any new options for power saver mode. I installed the most recent version from apk mirror and then rebooted. Everything looks the same. I'm on version 3.057.92923
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
You have to follow the steps in post #2 before installing the APK does anything. The APK just makes it so that power saver mode settings doesn't crash.
jackebuehner said:
You have to follow the steps in post #2 before installing the APK does anything. The APK just makes it so that power saver mode settings doesn't crash.
Click to expand...
Click to collapse
I believe he is referencing the fact that not all of the available settings are shown. From screenshots of the book on the HTC one there should be settings for what power saver does.
CPU
Display
Vibration
Data connection
Useful settings. I would like to be able to turn down the processor without turning off data.
mrbacks said:
I believe he is referencing the fact that not all of the available settings are shown. From screenshots of the book on the HTC one there should be settings for what power saver does.
CPU
Display
Vibration
Data connection
Useful settings. I would like to be able to turn down the processor without turning off data.
Click to expand...
Click to collapse
You'll likely need a custom kernel for that, which means root access and either unlocked bootloader or S-OFF. Once you're in that boat, you'll need Magisk to clear Safety.net. It's not otherwise doable on pure unrooted stock. FWIW, if you are rooted, you can use @flar2's ElementalX kernel which is quite good, especially when used with the helper app allowing you to tweak all settings.
**Root access required**
Download:
- G900T_PE1_Batch_Debloater
Instructions:
1. Extract the G900T_PE1_Batch_DeBloater folder onto your desktop.
2. Turn on USB Debugging from Developer Options and connect your device to your *PC.
3. Double-click debloater.bat to launch the program.
4. Grant Root Access if prompted by your device.
5. Select "Light," "Medium," or "Extreme" **debloating and press "Enter."
6. Once complete press "Enter" to return to the Main Menu and select ***Reboot Device.
7. Last, select "Exit" from the main menu to end your session. Done!
* Make certain that you have Samsung Drivers installed.
** Use Notepad++ or other text editor to view/edit the lists of removed apps in debloater.bat file.
*** It is normal for apps to begin force closing prior to rebooting your device.
muniz_ri said:
**Root access required**
Download:
- G900T_PE1_Batch_Debloater
Instructions:
1. Extract the G900T_PE1_Batch_DeBloater folder onto your desktop.
2. Turn on USB Debugging from Developer Options and connect your device to your *PC.
3. Double-click debloater.bat to launch the program.
4. Grant Root Access if prompted by your device.
5. Select "Light," "Medium," or "Extreme" **debloating and press "Enter."
6. Once complete press "Enter" to return to the Main Menu and select ***Reboot Device.
7. Last, select "Exit" from the main menu to end your session. Done!
* Make certain that you have Samsung Drivers installed.
** Use Notepad++ or other text editor to view/edit the lists of removed apps in debloater.bat file.
*** It is normal for apps to begin force closing prior to rebooting your device.
Click to expand...
Click to collapse
Thx for this tool, not just for the sake of it, but for the sake of us newbies being able to learn some basics from reading a batch file as well.
Waltsmith
I have the Samsung drivers installed and USB debugging on, however, the bat file stays on "Waiting for device". Normally I would get a notification granting my comp privileges for the debugging but no dice.
Cdub1976 said:
I have the Samsung drivers installed and USB debugging on, however, the bat file stays on "Waiting for device". Normally I would get a notification granting my comp privileges for the debugging but no dice.
Click to expand...
Click to collapse
I get the same unless i right click and run as admin but when i hit 2 (medium) then go i get the following?
UPDATE: Nevermind the reason adb commands were not running was due to the custom kernel i was using. switched kernels and the debloater worked fine.
destructionj said:
I get the same unless i right click and run as admin but when i hit 2 (medium) then go i get the following?
View attachment 3808327
UPDATE: Nevermind the reason adb commands were not running was due to the custom kernel i was using. switched kernels and the debloater worked fine.
Click to expand...
Click to collapse
Interesting. Thanks. I think I flashed the rom and Shinysides kernel. I'll have to try it without next time.
Sent from my SM-G900T using XDA-Developers mobile app
Cdub1976 said:
Interesting. Thanks. I think I flashed the rom and Shinysides kernel. I'll have to try it without next time.
Sent from my SM-G900T using XDA-Developers mobile app
Click to expand...
Click to collapse
yep thats the one. i flashed over to PhoeniX Kernel cuz i couldnt find the stock PE1. The phone booted and debloater worked fine.
http://forum.xda-developers.com/gal...kernel-phoenix-kernel-v7-marshmallow-t3340407
If you plan on using this with the latest update GPG2, edit the .bat file and remove the last line for TmoWfcPrefs, this is needed to change wifi calling preferences.
T-mobile latest marshmallow unrootable
Chuki82 said:
If you plan on using this with the latest update GPG2, edit the .bat file and remove the last line for TmoWfcPrefs, this is needed to change wifi calling preferences.
Click to expand...
Click to collapse
Hi im using the latest marshmallow of t-mobile
Any tips on how can i root my device?
ElKapitan_10 said:
Hi im using the latest marshmallow of t-mobile
Any tips on how can i root my device?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...l/root-how-to-root-sm-g900t-firmware-t3358190
As far as I know my phone has 6.0..1 Marshmallow and all is stock. Will the debloater program work on it?
ElKapitan_10 said:
Hi im using the latest marshmallow of t-mobile
Any tips on how can i root my device?
Click to expand...
Click to collapse
Have you tried CF-Auto-Root?
Chuki82 said:
If you plan on using this with the latest update GPG2, edit the .bat file and remove the last line for TmoWfcPrefs, this is needed to change wifi calling preferences.
Click to expand...
Click to collapse
OK, so I am dependent upon WiFI calling at work, and I did this, but maybe it's because I have an 11 month old or I don't know what but I must not have saved the BAT file correctly. anyway, I broke my WiFi calling.
- EDIT: it works if I turn it on with the quick icon - but if I go to settings, and click more networks, then click wifi calling it just crashes settings every time. any ideas?
Thanks in advance.
See post number 8 in this thread.
Sent from my SM-G900T
Summary && Detail:
1, you can convert the application to VR mode to watch and operate.
2, support the Bluetooth handle.
3, VR mode to support the up and down volume keys to control the screen size.
4, support touch screen operation, touch screen area from the upper left corner of the physical screen to start mapping
5, there may be some BUG, disable module can be restored
ScreenShot && Download:
http://repo.xposed.info/module/com.app360.app360
YOUTUBE:
https://www.youtube.com/watch?v=qyROy_zLaQA
Major update!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
detail:
Support global VR mode in landscape for all of android apps.
This function is tested on Android 5.1 and Android 6, Android5.0 has not yet tested.
This function is strong enough for having no friends
using:
open settings app,find Accessibility,switch on Magnification gestrues.when play apps in landscape,triple tapping the screen,then you will in VR mode.
notice:
miui should allow system alert window
if not work,please check auto run and record screen permission
any suggesting can email to [email protected]
app2vr said:
Summary && Detail:
1, you can convert the application to VR mode to watch and operate.
2, support the Bluetooth handle.
3, VR mode to support the up and down volume keys to control the screen size.
4, support touch screen operation, touch screen area from the upper left corner of the physical screen to start mapping
5, there may be some BUG, restart the phone can be restored
ScreenShot && Download:
repo.xposed.info/module/com.app360.app360
Click to expand...
Click to collapse
Wow is this real ?! I always wanted to do that
I'm testing it on a nexus 6. I'll report bug with logs if needed
thank you !!!!
BUG
Well it's not working on nexus 6 for me. It shows a dark screen when launching an app through app2vr interface.
Logs attached
also why so many files comes on /sdcard after instalation?? It looks like malicious app...
Dead-neM said:
Wow is this real ?! I always wanted to do that
I'm testing it on a nexus 6. I'll report bug with logs if needed
thank you !!!!
BUG
Well it's not working on nexus 6 for me. It shows a dark screen when launching an app through app2vr interface.
Logs attached
also why so many files comes on /sdcard after instalation?? It looks like malicious app...
Click to expand...
Click to collapse
Hi,thank you very much,because my application supports xposed mode and normal root mode, so i need to release the GoogleDoor and Lib files in sdcard for injection into the system_server process to complete the functional patch, the program does not contain malicious code, you can decompile to confirm, according to your feedback Log, I modified the program, the current xposed mode does not need to click to install, activate the module can be used after the restart, this is the beta version, does not support all types of app to be converted into vr mode,the current upgrade to the 19 version,this version had repaired your feedback.
app is really available
app is really available, but in the early stages of development, I will be the fastest speed to solve the problem.
Zenfone2 ze331ml lollipop 5.0.1 here.
Installed, allowed root to modify system partition, tried to start 920 text editor and just got a black screen.
Phone did not react to nothing, home button, power button, nothing. seems dead.
After a while adb via usb started working, and i issued a reboot from there.
Next, i've got a bootloop; i disabled xposed and the bootloop did not went away!
Fortunately i've had a complete twrp backup...
I tried to understand what it did to my system app, but the source on github is not available.
app2vr said:
Hi,thank you very much,because my application supports xposed mode and normal root mode, so i need to release the GoogleDoor and Lib files in sdcard for injection into the system_server process to complete the functional patch, the program does not contain malicious code, you can decompile to confirm, according to your feedback Log, I modified the program, the current xposed mode does not need to click to install, activate the module can be used after the restart, this is the beta version, does not support all types of app to be converted into vr mode,the current upgrade to the 19 version,this version had repaired your feedback.
Click to expand...
Click to collapse
Hi, thanks for the app
U mentioned about root mode. Any case this works with nougat in root mod I'm just asking
app2vr said:
Hi,thank you very much,because my application supports xposed mode and normal root mode, so i need to release the GoogleDoor and Lib files in sdcard for injection into the system_server process to complete the functional patch, the program does not contain malicious code, you can decompile to confirm, according to your feedback Log, I modified the program, the current xposed mode does not need to click to install, activate the module can be used after the restart, this is the beta version, does not support all types of app to be converted into vr mode,the current upgrade to the 19 version,this version had repaired your feedback.
Click to expand...
Click to collapse
Awesome I'll try again and report back. Thank you for being super fast.
Just one question what is the demo.apk on /sdcard?
When I try opening an application, a black screen just shows any way I can fix this? I am on a Redmi Note 3.
Dead-neM said:
Awesome I'll try again and report back. Thank you for being super fast.
Just one question what is the demo.apk on /sdcard?
Click to expand...
Click to collapse
DemoInject2.apk contains the function code,processing function logic in native layer is very complicated ,processing in java layer by using dexclassloader can enhance the stability.thanks
kokoko3k said:
Zenfone2 ze331ml lollipop 5.0.1 here.
Installed, allowed root to modify system partition, tried to start 920 text editor and just got a black screen.
Phone did not react to nothing, home button, power button, nothing. seems dead.
After a while adb via usb started working, and i issued a reboot from there.
Next, i've got a bootloop; i disabled xposed and the bootloop did not went away!
Fortunately i've had a complete twrp backup...
I tried to understand what it did to my system app, but the source on github is not available.
Click to expand...
Click to collapse
Very sorry,its my fault, I am tested on Android 5.1, Android6.0 machine, can you provide some log information? MainXposed.java is not confused, because the visual processing part of the code is not my work,so its hard to opensource.
reversegear said:
Hi, thanks for the app
U mentioned about root mode. Any case this works with nougat in root mod I'm just asking
Click to expand...
Click to collapse
Today, I experimented with Android N, I found that when I injected into the system_server, android :: AndroidRuntime :: getJavaVM () often return null ,so i can not load the function code in DemonInject.apk with jni_env , i am looking for solution..
APP2VR now can run on nougat when selinux disabled.
Gtxinsane said:
When I try opening an application, a black screen just shows any way I can fix this? I am on a Redmi Note 3.
Click to expand...
Click to collapse
can you provider me some log? I will resolve your problem as quickly as possible!
On v20 it's still not working on a nexus6. Problem looks the same. Video and Logs below.
https://drive.google.com/folderview?id=0BwCC2VJYgCavdzUyODhjejAtZXM
waiting for stable build
Dead-neM said:
On v20 it's still not working on a nexus6. Problem looks the same. Video and Logs below.
https://drive.google.com/folderview?id=0BwCC2VJYgCavdzUyODhjejAtZXM
Click to expand...
Click to collapse
From the Log analysis, APP2VR Xposed Module is not enabled, I Hooked startActivity but no log output, you can uninstall and reinstall V21 version.
app2vr said:
From the Log analysis, APP2VR Xposed Module is not enabled, I Hooked startActivity but no log output, you can uninstall and reinstall V21 version.
Click to expand...
Click to collapse
Why no suports phone root
After “put your device into cardboard“ just a black screen with the settings symbol, but not clickable + difficulties exiting the app.
InFocus M808 modded Stock 6.0
Could you include two key options.
1. To disable gyroscope, or to show in static frame.
2. To adjust FOV.
Sent from my Lenovo X3a40 using XDA Labs
BUGS
In Cardboard mode: It only shows main activity, app can not be controlled by the headset, Moga gamepad doesnt work (moga universal driver) and probably other controllers, and yoi have to look towards fixed direction
In Global mode: Not all the screen is visible through the vr glass (bigger than it should be)
please support locked mode screen
**does not yet work for 7.1.1**
Using a PC to root seems like moving backwards compaired to a 'one click' apk. but we're already at the PC to flash eng_boot, plus this new method is so much faster...so here we go
Features:
SuperSU 2.82
Init.d
Wifi fix
Flashlight fix
Issues:
For the wifi fix I just copied an edited J320a build.prop
So J320AZ users will see J320A in about device, and will have to reassign notification sounds. (Hope to fix it in the future)
Needed Files:
Odin
Root_J320A.zip
Procedure:
1. Unzip both files.
2. Run Odin click the 'AP' button.
3. Navigate to Root_J320A/bin and select sm-j320a_Engroot_601PJ2.tar and press "Start" (make sure NOT to check re-partition)
4. After it completes sucessfully, leave the phone hooked to the pc... and then wait, wait a good 2 or 3 minutes after its booted.
5. Once 2 or 3 minutes has gone by you can navigate to the Root_J320A folder.
6. There you'll see root.bat, double click that let it do its thing.
6a. If at any time during the script you see "adb out of date. killing..." hit the x to close the window and restart the script.
*This may work on J320AG models but make sure you check oem unlock from dev settings first... and let us know how it goes
Enjoy
- D
Credits:
@ashyx - eng_boot
@Sh$llNinjA - eng_root
@sjowns - flashlight fix
@Chainfire - SuperSU
@Ryuinferno - init.d script
Excellent! This works perfectly! Thank you so much for posting this.
J320A PC9 worked perfectly!
March security patch
Hi man, this method support the march security patch, or are still in january security patch
I tested on AQD2 so it'll work on AQC1 too.
I assume it'll work for all 6.0 updates we get.
I tested on AQD2 so it'll work on AQC1 too.
I assume it'll work for all 6.0 updates we get.
This works perfectly. Thank you!
I suggest you put 'root' in the tile, otherwise google cannot find it.
I googled 'j320a root', google only links to ashyx's post which doesn't... well maybe only mine phone.
I am new to this root bit.
Possibly I have done something wrong. I read your instructions carefully and quit didn't understand where the unzipped files should go. Do any of these have to be placed in the phone's directory?
Failed on my AT&T SM-J320A
I wonder if it has anything to do with the new update pushed out recently
@JeffF73
Run Odin and Click ap.
Navigate to the directory where you unzipped root_j320a.zip.
In that folder you'll see a bin folder, inside that is sm-j320a_Engroot_601PJ2.tar, which needs flashed to the phone.
Once that's complete, let it boot and wait.
Then run root.bat
DamienMc said:
@JeffF73
Run Odin and Click ap.
Navigate to the directory where you unzipped root_j320a.zip.
In that folder you'll see a bin folder, inside that is sm-j320a_Engroot_601PJ2.tar, which needs flashed to the phone.
Once that's complete, let it boot and wait.
Then run root.bat
Click to expand...
Click to collapse
Hello DamienMc Thank you for your reply and help. I figured it out. I had to put my phone in "Download Mode" by holding down Volume Down, Home Button and Power button while booting. Then I was able to use Odin without failing. This solved all my problems thank you
Is it safe to flash this after doing this?
https://mega.nz/#!D8hSzLaa!pDugFwQ0NyGBLy36j1643bI3e4f9xog7US8UTTkZ8SU
sonic0504 said:
Is it safe to flash this after doing this?
https://mega.nz/#!D8hSzLaa!pDugFwQ0NyGBLy36j1643bI3e4f9xog7US8UTTkZ8SU
Click to expand...
Click to collapse
Yes, that has selinux set to permissive as well, although there's no real difference. The build.prop differences are noticable tho...I plan on doing an update to this, just have to figure out how to tell if it's A or AZ from adb
Ragheb Alama said:
Hi man, this method support the march security patch, or are still in january security patch
Click to expand...
Click to collapse
Yes, it works for QC1. However, you may need to replace build.prop in /bin from QC1 with WiFi fix before root.
I did notice that after root, the contents of /Android/data folders in both internal storage and external sd card are hidden from PC. Before root, both are visible from PC. Any thoughts about what cause the changes?
Will this work on July security patch?
DamienMc said:
Yes, that has selinux set to permissive as well, although there's no real difference. The build.prop differences are "noticeable" tho...I plan on doing an update to this, just have to figure out how to tell if it's A or AZ from adb
Click to expand...
Click to collapse
Thanks, I just needed to install this to use adb to uninstall an update I did to System UI because it would continuously crash.
SBCarr said:
Yes, it works for QC1. However, you may need to replace build.prop in /bin from QC1 with WiFi fix before root.
I did notice that after root, the contents of /Android/data folders in both internal storage and external sd card are hidden from PC. Before root, both are visible from PC. Any thoughts about what cause the changes?
Will this work on July security patch?
Click to expand...
Click to collapse
Probably the eng_boot we use, it breaks the flashlight and wifi passwords too... it does work on j320a July update, so I assume it'll work on j320az update too
@DamienMc Dude, thanks for ur post, but i tried 2 times and fail, i got stuck at logo, i had to reflash to stock but now my build.prop is gone or corrupted, my phone says model unknow, i cant even use hidden menus like *#06, etc, i need the original file to fix it please. model SM-J320A RUNING QC1
ScSoluciones said:
@DamienMc Dude, thanks for ur post, but i tried 2 times and fail, i got stuck at logo, i had to reflash to stock but now my build.prop is gone or corrupted, my phone says model unknow, i cant even use hidden menus like *#06, etc, i need the original file to fix it please. model SM-J320A RUNING QC1
Click to expand...
Click to collapse
Reflash CSC as well, that'll wipe your device but fix your problem.
Are you sure you waited long enough after the phone booted before rooting?
If at any time during the script you see it say "adb server out of date. Killing..." something is wrong. You can x the command prompt and do root.bat again.
DamienMc said:
Using a PC to root seems like moving backwards compaired to a 'one click' apk. but we're already at the PC to flash eng_boot, plus this new method is so much faster...so here we go
Features:
SuperSU 2.82
Init.d
Wifi fix
Flashlight fix
Issues:
For the wifi fix I just copied an edited J320a build.prop
So J320AZ users will see J320A in about device, and will have to reassign notification sounds. (Hope to fix it in the future)
Needed Files:
Odin
Root_J320A.zip
Procedure:
1. Unzip both files.
2. Run Odin click the 'AP' button.
3. Navigate to Root_J320A/bin and select sm-j320a_Engroot_601PJ2.tar and press "Start" (make sure NOT to check re-partition)
4. After it completes sucessfully, leave the phone hooked to the pc... and then wait, wait a good 2 or 3 minutes after its booted.
5. Once 2 or 3 minutes has gone by you can navigate to the Root_J320A folder.
6. There you'll see root.bat, double click that let it do its thing.
6a. If at any time during the script you see "adb out of date. killing..." hit the x to close the window and restart the script.
*This may work on J320AG models but make sure you check oem unlock from dev settings first... and let us know how it goes
Enjoy
- D
Credits:
@ashyx - eng_boot
@Sh$llNinjA - eng_root
@sjowns - flashlight fix
@Chainfire - SuperSU
@Ryuinferno - init.d script
Click to expand...
Click to collapse
This was the first time i ever tried to root my phone and i followed the instructions located here:
https://forum.xda-developers.com/galaxy-j3-2016/how-to/root-samsung-sm-j320a-galaxy-express-t3573628
Well my wifi wouldnt save any passwords , flashlight was broken and my ATT J320A would always want to boot in to recovery mode. I thought i was screwed!!!! Then i seen one link in the thread to this thread where Kingroot was not needed.
I opened Odin and gave a shot and then ran Root.bat file, and the device rebooted wifi and flashlight were fixed and best of all my J3 was now rooted!!!!!
Still working on getting rid of that annoying pop up but all is good, thanks so much for this root and fix from the other thread.
james2ya said:
This was the first time i ever tried to root my phone and i followed the instructions located here:
https://forum.xda-developers.com/galaxy-j3-2016/how-to/root-samsung-sm-j320a-galaxy-express-t3573628
Well my wifi wouldnt save any passwords , flashlight was broken and my ATT J320A would always want to boot in to recovery mode. I thought i was screwed!!!! Then i seen one link in the thread to this thread where Kingroot was not needed.
I opened Odin and gave a shot and then ran Root.bat file, and the device rebooted wifi and flashlight were fixed and best of all my J3 was now rooted!!!!!
Still working on getting rid of that annoying pop up but all is good, thanks so much for this root and fix from the other thread.
Click to expand...
Click to collapse
@james2ya If you are talking about the pop that either says something in the order of "Unathorized activities where made" go to the play store, download and install SecurityLogAgent Fix, Open it up and click "Disable Securitylogagent" then restart phone when it asks. This should help get rid of that popup.
works great for me! now i just need a custom rom. is it possible to install trwp on j320a?
Hi All !
Some of us do know the application a long time but others don't. Therefore this small GUIDE.
Removing system apps without root/unlocked can be done in a few ways like :
manually : with an ADB list and described HERE huge thnx @SirTAVARES
automatic : if you don't like to do it manually, you can use the ADB/Fastboot Tool which will do the job for you.
The XiaomiADBFastbootTools isn't explained in depth afaik and can do a lot more but I'll focus on the removal of those system apps.
HOW TO :
NOTE : do try some apps (not all at once) and see if the phone boots again - if you would have a problem you can always restore the onces you removed or perform a factory reset to restore all apps (as they are not really gone )
0. enable developer options to enable USB debugging ( go to settings/about phone/tap MIUI version 7 times to enable dev. options -> then go to settings/additional settings/ dev. options/enable USB debugging )
1. download the latest version HERE
2. run the .jar application
3. you'll get this screen
As you can see, the tool will start by default in ADB. You'll see a bunch of apps you could de-install under the Uninstaller tab.
If you're sure which apps you want to de-install just check the ones you want and tab UNINSTALL
google where is the nearest gas station
TIP : try one first like Google Chrome f.e. and see if it works
EXAMPLE : Removal of Google Chrome :
Once removed you can check if the app is gone of your home screen apps or under settings/installed apps/tap the 3-dot sign to show all apps/ search for ''chrome'' and the app should be removed.
4. if you want the removed app(s) back, just tap the Reinstaller and check the ones you want to re-install. Easy right !
Once re-installed your Chrome app will appear again on your home screen/app list
5. TIP : before removing, check the app name under settings/installed apps/show all apps/tap on an app and tap the Ⓘ to get the app info
Other functions :
1. As you probably noticed besides running in ADB, this tool can easily boot into Fastboot, Recovery, System or EDL.
When booting into Fastboot you can see some other functions you can apply. Be aware of the risks applying things under fastboot !
2. Very useful option is the possibility to push, pull ,... apps/folders with FILE EXPLORER. Just tap OPEN and you can easily perform some actions afterwards.
(ignore the KB sizes - once pulled you'll get the right folder/apks )
E N J O Y
Nice tuto....will debloat for sure...
SirTAVARES said:
use this list: https://drive.google.com/open?id=1TbofebVTy5U1FDMQEAfv6O1CsxTblpO7
includes some adaway hosts to block Xiaomi Stuff
Click to expand...
Click to collapse
Dear SirTAVARES, Can you tell me, is adaway worked with Global stable NON Root ? How to push it inside system files ??
N.ice tool, but I have a doubt... How I remove the Security Center?
PS. I have a Mi 9, with locked bootloader and now I'm beta 9.6.27
Thank you very much for sharing, i will test for changing system font
Sorry for that stupid question, but I don't get the tool running
Prinz069 said:
Sorry for that stupid question, but I don't get the tool running
Click to expand...
Click to collapse
You must have the JRE environment installed and pointing to the correct path.
omgomg said:
You must have the JRE environment installed and pointing to the correct path.
Click to expand...
Click to collapse
What is "JRE Environment" please? Why same not included in the OP instructions?
All help appreciated!
belerephont said:
What is "JRE Environment" please? Why same not included in the OP instructions?
All help appreciated!
Click to expand...
Click to collapse
This is what you have to install to be able to run .jar files. OP just assumed everyone has java installed (I would too to be honest) and didn't mention it.
I have installed the updated java and am trying to open the windows 10 boot tool and it refuses to open. Yes I did upzip it but the program will not open. Any help please?
gardenwarlord said:
I have installed the updated java and am trying to open the windows 10 boot tool and it refuses to open. Yes I did upzip it but the program will not open. Any help please?
Click to expand...
Click to collapse
What version you installed? I recommend that you install 6.5.1:
https://github.com/Saki-EU/XiaomiADBFastbootTools/releases/tag/6.5.1
That is what I downloaded...Win version. I unzipped and then tried to open but it does not work.
gardenwarlord said:
That is what I downloaded...Win version. I unzipped and then tried to open but it does not work.
Click to expand...
Click to collapse
You don't need unzipped. Download the version .JAR an run it. I made this way
Evidently I have absolutely no idea what I am doing. Nothing opens
gardenwarlord said:
Evidently I have absolutely no idea what I am doing. Nothing opens
Click to expand...
Click to collapse
Lets go from begining:
- First thing that I did, I uninstalled all versions of Java;
- Second, (I made this way, you can jump this step) - reboot my laptop;
- Third, I installed the latest version (in this moment is version 8, update 221) - I installed both 32 bits (x86) and 64 bits (x64);
- Fourth, run the tool (just download .JAR version) and clicked with right botton for open with Java.
When I right click nothing asks to open it in java
If you have java installed, then just a double click on the XiaomiADBFastbootTools-6.5.1.jar is enough.
Opens in 7z
gardenwarlord said:
Opens in 7z
Click to expand...
Click to collapse
Probably you made 7zip as default app. Right botton, "open with...", choose Java
Hello! Tried different versions ... NOT FOUND Redmi 4X MIUI 10 Global 9.6.27 Android 7.1.2 N2G47H