I have an Amlogic S802 device, what's the best ROM for it?
Thanks.
I opened it up and the board says
M9&M8_V1.0 2014/07/07
on it
You are going to be limited to android 4.somthing, there are no newer firmware's for your chip, you should upgrade, i recommend an S905X box, they usually come with android 6, but can be updated, i have an android TV 9 ROM for S905X Devices & Android TV 7.1.2 Too, These Devices Are Cheap, if Your in the UK i can send you a link i payed 20 for a decent s905x box, with a good wifi chip inside (Alot Have Bad Performing Wifi Chips)
Thanks for the reply, I'm going to look for an Android 10+ capable TV box
g000n said:
Thanks for the reply, I'm going to look for an Android 10+ capable TV box
Click to expand...
Click to collapse
Cool good luck box hunting
hi, @aidanmacgregor i'd like that link please to the s905x box
jimenis said:
hi, @aidanmacgregor i'd like that link please to the s905x box
Click to expand...
Click to collapse
Hi website is here follow to s905x section and in YouTube description there is a download link
Aidan's ROM
Custom Android TV For Amlogic
aidansrom.wordpress.com
aidanmacgregor said:
Hi website is here follow to s905x section and in YouTube description there is a download link
Aidan's ROM
Custom Android TV For Amlogic
aidansrom.wordpress.com
Click to expand...
Click to collapse
Thanks for all the great work
Related
I spent many hours with one of these MXQ Pro 4K boxes trying to restore it following a faulty firmware which was incorrect. 80GB later and 2 days solid I found the correct firmware.
I took a look at the board and it is labelled H234 V2.08 HXW17041803-02 it is an AmLogic S905x quad core, mali 450, 1gb/8gb as well.
It has the strange SCI S9082C wifi chip.
This firmware should get your device working again as it sure did with mine. Flash with USB Burn Tool.
https://mega.nz/#!D8kGGIib!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw
nokiaman2002 said:
I spent many hours with one of these MXQ Pro 4K boxes trying to restore it following a faulty firmware which was incorrect. 80GB later and 2 days solid I found the correct firmware.
I took a look at the board and it is labelled H234 V2.08 HXW17041803-02 it is an AmLogic S905x quad core, mali 450, 1gb/8gb as well.
It has the strange SCI S9082C wifi chip.
This firmware should get your device working again as it sure did with mine. Flash with USB Burn Tool.
https://mega.nz/#!nt1x0LAL!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw
Click to expand...
Click to collapse
Hi
Do you found (by chance) firmware for 905x H234 V2.08 but HXW17040802-02 (that is a board with 8 ram chipset K4B1G0446F).
thx
pgreed said:
Hi
Do you found (by chance) firmware for 905x H234 V2.08 but HXW17041803-02 (that is a board with 8 ram chipset K4BIG0446F).
thx
Click to expand...
Click to collapse
No sorry I did not, it has stayed working and I have left it alone since.
I hope that in 80 GB of firmware is something that fit mine...
THANK YOU!
nokiaman2002 said:
I spent many hours with one of these MXQ Pro 4K boxes trying to restore it following a faulty firmware which was incorrect. 80GB later and 2 days solid I found the correct firmware.
I took a look at the board and it is labelled H234 V2.08 HXW17041803-02 it is an AmLogic S905x quad core, mali 450, 1gb/8gb as well.
It has the strange SCI S9082C wifi chip.
This firmware should get your device working again as it sure did with mine. Flash with USB Burn Tool
Click to expand...
Click to collapse
.
I Joined this forum to say Thank You. You helped me save my box bro.
Wishing you good fortune.
Cheers and Thanks again.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
nokiaman2002 said:
I spent many hours with one of these MXQ Pro 4K boxes trying to restore it following a faulty firmware which was incorrect. 80GB later and 2 days solid I found the correct firmware.
I took a look at the board and it is labelled H234 V2.08 HXW17041803-02 it is an AmLogic S905x quad core, mali 450, 1gb/8gb as well.
It has the strange SCI S9082C wifi chip.
This firmware should get your device working again as it sure did with mine. Flash with USB Burn Tool.
https://mega.nz/#!nt1x0LAL!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw
Click to expand...
Click to collapse
the link is not working
could you provide some other source ?
I updated the link, sorry its https://mega.nz/#!D8kGGIib!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw now
I can not enter to recovery
good morning, I installed this image and installed kodi but I do not see the icon and I can not do the Root, do not put me in super user. Could you help me?
nokiaman2002 said:
I updated the link, sorry its https://mega.nz/#!D8kGGIib!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw now
Click to expand...
Click to collapse
Hi, I'm new, can you please put back the link that works this doesn't work.
Thanks
I have TVBOX
S905X amlogic ARM53 Quad-Core SCI S9082C WiFi 1GB/8GB H234 v2.08 Firmware.Thanks
I have TVBOX
S905X amlogic ARM53 Quad-Core SCI S9082C WiFi 1GB/8GB H234 v2.08 Firmware I need a firmware that works with the S9082c WiFi chip
Hi guys can someone help me, I have TVBOX
S905X amlogic ARM53 Quad-Core SCI S9082C WiFi 1GB / 8GB H234 v2.08 Firmware I need a firmware that works with the S9082c WiFi chip. I need the firmware that works or the original firmware.
I am attaching some photos of the Motherboard.
Thank you very much
Hi guys can someone help me, I have TVBOX
S905 amlogic SCI S9082C WiFi 1GB / 8GB I need a firmware that works with the S9082c WiFi chip. I need the firmware that works or the original firmware.
I am attaching some photos of the Motherboard.
Thank you very much
nokiaman2002 said:
I spent many hours with one of these MXQ Pro 4K boxes trying to restore it following a faulty firmware which was incorrect. 80GB later and 2 days solid I found the correct firmware.
I took a look at the board and it is labelled H234 V2.08 HXW17041803-02 it is an AmLogic S905x quad core, mali 450, 1gb/8gb as well.
It has the strange SCI S9082C wifi chip.
This firmware should get your device working again as it sure did with mine. Flash with USB Burn Tool.
https://mega.nz/#!D8kGGIib!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw
Click to expand...
Click to collapse
hi bro could you please refresh new linke download
mezo777 said:
nokiaman2002 said:
I updated the link, sorry its https://mega.nz/#!D8kGGIib!feVTPzsWTr_1B6INCrQhR_hRU6Fqe10tvb5_XxDjZIw now
Click to expand...
Click to collapse
Unfortunately the link isn't working any more.
Click to expand...
Click to collapse
I'm not sure, but I think the SCI S9082C chip is a clone of a Rtl8189es. Any body could help with that?
Brunosuperman said:
SCI S9082C chip
Click to expand...
Click to collapse
Very ancient chip...
T95N Mini M8S Pro [Android 6.0] firmware (board T95X-8189-9082C V6 2+8)
h**ps://cloud.mail.ru/public/HHux/wemBEw8iX
Hi, where is it possible to download this firmware, the links no longer contain the file...thanks!
anyone have android 7 rom for S905X cpu S9082C wifi?
Dear Team
Can i have the latest firmware for docooler M9s pro s905 3 GB 32GB
I have a TV box with Android 5.1 and as i can see people are talking about 7.1, Is there any way to have a link or a file to update my old firmware
OTA applications is not supporting this product and the manufacture them self is not answering my requests also am not finding any link over the internet has the latest firmware file.
Thank you so much for your support.
It seems that no one is using this kind of BOX!
dragons79 said:
Dear Team
Can i have the latest firmware for docooler M9s pro s905 3 GB 32GB
I have a TV box with Android 5.1 and as i can see people are talking about 7.1, Is there any way to have a link or a file to update my old firmware
OTA applications is not supporting this product and the manufacture them self is not answering my requests also am not finding any link over the internet has the latest firmware file.
Thank you so much for your support.
Click to expand...
Click to collapse
rom 3gb/32gb 7.1.x
https://mega.nz/#!6N4TwKAI!7Gt28mgv5R_Y_ZfkD1Ik8MSgFdzFCNgJ2i2a813ja5U
dont update super su, it crashes and stock in boot...
Hello,
Is there any Android TV Rom for this box, please?
I have tried atvxperience rom, PoisonATV V4.8 S905X but this box does not load these roms.
Am looking for an Android TV Rom if you know one, please share a link?
Kind regards
guufaan said:
https://mega.nz/#!6N4TwKAI!7Gt28mgv5R_Y_ZfkD1Ik8MSgFdzFCNgJ2i2a813ja5U
dont update super su, it crashes and stock in boot...
Click to expand...
Click to collapse
I thinks this image is damaged? In TWRP it says that img is to large and USB Burn Tool is unable to open the file?
Maybe someone can help me?
guufaan said:
dont update super su, it crashes and stock in boot...
Click to expand...
Click to collapse
Is this ROM good even for 2gb/16gb model?
3g/32g
bertolaso said:
Is this ROM good even for 2gb/16gb model?
Click to expand...
Click to collapse
No it's not, but i stopped using the box, now im on H96+ that work better 4 me,
i have flashed the 2/16 Rom once on the bigger sister, the box showed after that only the 2/16gb rom/ram... and worked,
Me work
i just bricked mine using that image; it showed "upgrading" for a about 5 seconds and then puf switched off, now no blue light, only the red (power) one :-(
Hi guys, I just bought this device from AliExpress.
I'm very excited to get my hand on it.
But it's seems to have a strong engine under the hood in a cheap frame.
I guess the hybrid OS from HK, Vontar and transpeed are the downside.
Any chance to get this device certified as Aidans rom?
Also, I'm not sure if slimbox will work, even they support S905-x4.
I guess I'll have to wait till development of this box get start.
SlimboxTV firmware is finally available for S905X4.
Vontar X4
CPU: Amlogic S905X4 GPU: G31™ MP2 Изменения: прошивки slimBOXtv собраны на базе заводской прошивке ah218.VONTAR_X4_1000M_11.2023.01.05.02.55
slimboxtv.ru
What is the Widevine DRM level on this device?
GabbyWC said:
What is the Widevine DRM level on this device?
Click to expand...
Click to collapse
Widevine L3. If you want L1 you need a more expensive device like Mecool KM6.
LITUATUI said:
SlimboxTV firmware is finally available for S905X4.
Vontar X4
CPU: Amlogic S905X4 GPU: G31™ MP2 Изменения: прошивки slimBOXtv собраны на базе заводской прошивке ah218.VONTAR_X4_1000M_11.2023.01.05.02.55
slimboxtv.ru
Click to expand...
Click to collapse
I guess, im waiting for 100mb version, its supposed to be Transpeed, but still are not available yet.
d.terenzzo said:
I guess, im waiting for 100mb version, its supposed to be Transpeed, but still are not available yet.
Click to expand...
Click to collapse
There's already a test version for your box.
Тест прошивок
Изменения: тестовая для H96_Max_X4
slimboxtv.ru
sbx_transpeed_x4s_pie_16_test.7z
drive.google.com
LITUATUI said:
There's already a test version for your box.
Тест прошивок
Изменения: тестовая для H96_Max_X4
slimboxtv.ru
sbx_transpeed_x4s_pie_16_test.7z
drive.google.com
Click to expand...
Click to collapse
Cheers buddy, i'll try this in the weekend
This rom is very good, however they can't run properly KODI.
The app shuts down every time it starts.
You guys can also try CoreELEC, doesn't work for me yet, but some people with S905X4 boxes are already using it.
Report about Amlogic S905X4 HK1 RBOX X4
Can this TV box support Dolby Vision in Kodi? I’m getting a new 85-in TV with Dolby Vision.
discourse.coreelec.org
Mpoumpounas said:
This rom is very good, however they can't run properly KODI.
The app shuts down every time it starts.
Click to expand...
Click to collapse
I believe this problem can be solved by creating a data directory in sd card.
I don't have a device nearby and can't remember the directory path.
But you can do this:
1. adb shell
2. logcat
3. start kodi
4. you may find error messages about directory was not found or similar.
5. mkdir /sdcard/..
6. try start kodi again
Thanks for the advice. I will try.
However this error is probably ROM related. I tested another rom from 4pda and works ok. Same kodi apk.
Which firmware did you used? I can't also open Kodi or play YouTube videos, the box freezes every time.
This rom runs Kodi. It is stock rom from the seller.
1 GB file on MEGA
mega.nz
Mpoumpounas said:
This rom runs Kodi. It is stock rom from the seller.
1 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
Thanks. I confirm that with that firmware Kodi opens.
Found a new version where Kodi also works.
Яндекс
Найдётся всё
disk.yandex.ru
Hi,
I recently bought a Transpeed X4 android box (Amlogic s905x4, 4/128GB). It's great, but I have a problem. The HBO Max app has no sound. If anyone knows how to set up the device I would greatly appreciate it. P.S. I tried all the instructions I could find online. YouTube and Netflix (sideloaded) work fine.
New slimboxtv firmware: https://slimboxtv.ru/transpeed-x4-x4s/
Checked that this rom also runs Kodi.
Any Review on Slimbox rom?
Does the root work properly and you can edit hosts file etc.
I read that on stock rom it doesn't work properly to edit root files.
Root works fine. You need to enable it in the settings. Slimbox is the best custom ROM for me.
SlimboxTV firmware is the best at the moment.
However, I'm not sure that root is fully implemented, because restoring the settings of my apps with Neo Backup fails.
hello,
I have X96 mini, P281 board ,S905W CPU, 1GB RAM, no idea about the wifi
The OS (Nougat) 7.1.2 is working but I keep getting errors that apps or services stopped or failed, it's not severe case, I still manage to do a lot of things I just hope to find a newer OS
Sadly I found out the RAM is just 1GB, is there a way to install any newer OS or ROM on this device? of course wifi and Bluetooth support is essential, I want a fully working OS version that is not sluggish/slow
Is this possible? I want something already known to work, well tested and proven
I want to use the device to play 4K video files and play streams from local network, install the most Play store apps.
DNA55 said:
Sadly I found out the RAM is just 1GB, is there a way to install any newer OS or ROM on this device?
Click to expand...
Click to collapse
Download Android 9 stock firmware for X96 Mini TV Box «
chinagadgetsreviews.com
mAtvXk said:
Download Android 9 stock firmware for X96 Mini TV Box «
chinagadgetsreviews.com
Click to expand...
Click to collapse
This seems to be suited for 2 GB RAM?
Edit: Also where do I find tutorial for such flashing?
DNA55 said:
This seems to be suited for 2 GB RAM?
Click to expand...
Click to collapse
Both 1GB and 2GB of system memory are supported.
mAtvXk said:
Both 1GB and 2GB of system memory are supported.
Click to expand...
Click to collapse
Thank you,
is there a forum discussing and supporting this upgrade?
I tried to google the file name and title "Android 9 stock firmware for X96 Mini" but couldn't find a community discussing this flash
DNA55 said:
is there a forum discussing and supporting this upgrade?
Click to expand...
Click to collapse
TV Box X96 Mini - Official firmware (OS Android 9.0), extensive topic on 4PDA.ru forum (only russian) - h**ps://4pda.to/forum/index.php?showtopic=975595
mAtvXk said:
TV Box X96 Mini - Official firmware (OS Android 9.0), extensive topic on 4PDA.ru forum (only russian) - h**ps://4pda.to/forum/index.php?showtopic=975595
Click to expand...
Click to collapse
Thank you mAtvXk, you're amazing
I will try to translate it and see if useful for what I need/hope and if easy for me
DNA55 said:
Thank you mAtvXk, you're amazing
I will try to translate it and see if useful for what I need/hope and if easy for me
Click to expand...
Click to collapse
Did you find anything? I bricked the same device and I think I can't find the correct firmware for this board. My Usb Burning Tool keep failing at 2% with error [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error. Do we have the same board? (it has 2308 writing on it, but I have a working identical device and its says p281 in Android Recovery:
Amlogic/p281/p281
9/00100618010151200000/1.0.0
pokemadatv3 said:
Did you find anything? I bricked the same device and I think I can't find the correct firmware for this board. My Usb Burning Tool keep failing at 2% with error [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error. Do we have the same board? (it has 2308 writing on it, but I have a working identical device and its says p281 in Android Recovery:
Amlogic/p281/p281
9/00100618010151200000/1.0.0
Click to expand...
Click to collapse
I never opened the device to see the board number...
I decided it is not worth the effort. the information is not clear and expected results is not clear also, I don't use it anymore, too many problems to fix.
hi. i have a W95 TV BOX (Got it from here) that runs Andoid 7.1.
It is a Box with 2GB of Ram, 16 GB of space, Amlogic S905W
I would like to upgrade it to newer versions of Android >8 since there are a few that are not supported. The device is generic and i cannot find an official repository to download an update. So i am looking for an alternative firmware that will make this box run newer Android compared to 7.1 that currently holds.
Any suggestions please?
atux_null said:
...The device is generic and i cannot find an official repository to download an update...
Click to expand...
Click to collapse
h**ps://4pda.to/forum/index.php?act=findpost&pid=77893044&anchor=Spoil-77893044-4
There are plenty alternative FW's available for your (generic S905W) device, atvXperience, Aidan's, SlimBOX ROM's and so on, google is your friend.
Thanks for your reply. atvXperience looks nice. Could someone point me to the ROM and the method to install it, please?