{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
reboot
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Niiiiice!!! I will try it ?
It Is Android 10?? You have some screenshot??
Does the fingerprint under the display work with this ROM?
Honzule89 said:
It Is Android 10?? You have some screenshot??
Click to expand...
Click to collapse
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Honzule89 said:
Does the fingerprint under the display work with this ROM?
Click to expand...
Click to collapse
Unlocking by fingerprint is implemented for scanners on the back of the phone.
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity. I will not install this ROM. But still great work
Honzule89 said:
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity.
Click to expand...
Click to collapse
This is GSI. This is a basic image of the firmware, not for a concrete model. Are you ready to donate for Moto Oe Zoom specific firmware development?
Honzule89 said:
I will not install this ROM.
Click to expand...
Click to collapse
The choice is yours. No one is forcing anyone. It's just that up until now it hasn't been possible to get a working system on Android 10.
After the flashes I get this:
Failed to mount '/system's (Invalid argument)
After I unpack the image zip, I rename to .img, maybe that's why, help me please...
ilia3367 said:
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Click to expand...
Click to collapse
You're truly incredible, thank-you SOOOOOO much for your work. :laugh:
It's amazing that unofficial development is an entire OS version better than OEM work! :good:
Hi,
nice job....i would donate for development....fix bluetooth?
giar72 said:
....fix bluetooth?
Click to expand...
Click to collapse
I tried to fix it, but I couldn't...
sorry...
Hell yeah, nice work. Probably not going to install it since I rely on Google pay and Bluetooth headphones regularly, but it's nice to finally see some roms for this device.
problem help please
ilia3367 said:
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Click to expand...
Click to collapse
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
forgot to mention
death1426 said:
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
Click to expand...
Click to collapse
i think i accidentally hit boot on slot b on twrp if so how can i fix this if it wont boot into bootloader?
To load into slot A, execute the command:
fastboot --set-active=a
Does it still has the moto shortcuts? Like alsways on display and the flashlight gesture?
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
thirdphotographer said:
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
Click to expand...
Click to collapse
This ROM is not the original GSI Havoc-OS image.
Related
https://drive.google.com/file/d/0B7TImVKwZ-NXX2FoaVphdVBFZzg/view?usp=sharing
Android Patch Level: September 2016
Build Date: 14th Spetember
Bugs fixed:
Theme customization crash
VoLTE fix
Improved Le Store
You need to flash SuperSU 2.78 zip (15 September build) from TeamSpain TWRP after completing initial setup wizard.
Install latest Google Play store apk to get access to Play store. (Google Play Services already installed)
Open Downloads app -> Tap Top right Settings and set Data Connection to No Limit.
Done. Rom is very smooth and stable. Battery life is yet to be checked. Chinese 17s has stunning battery life. Will compare with it later.
Is there any multi-language pack like for the 17S?
Please share some features and feedback for this new rom. Whats new??
Running this now, can't see any visual difference from 17s but all is running good at first impression.
Testing to see if my notification problem with 17S is fixed now.. fingers crossed
Can we install it with Indian version?
Yes, you can!
May I know where's the official Rom from?
I try to check the CN official site for Change log but official webpage only have 017s version as latest version.
<http://bbs.le.com/zt/eui/le_max2.html>
This version is the version leaked version of the experience know very few people I saw in the QQ group was leaked out to share with the fans look to foreign
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Playstore link redirect to eBay.... Can you fix the link?
I flashed this rom yesterday. I think, this rom is good, but fingerprint works badly.
no kernel source code leak?
How do I flash this if I have twrp and not stock recovery.?
King Krued said:
How do I flash this if I have twrp and not stock recovery.?
Click to expand...
Click to collapse
If you have TWRP, boot into your old ROM (Whichever you have currently installed) and copy the 19s update.zip file to the root of your SD Card.
Boot into TWRP recovery. Go to Wipe-> Advanced -> Wipe everything except internal storage This is important. Do not wipe internal storage.
Once the wipe is complete, go back to main menu of TWRP. Tap Install -> select the 19S file you copied and let it flash. First time during flashing, it might throw some Error 7. Go back and flash again without wiping anything and it will flash correctly.
Boot into system and make sure you Swipe to disable stock recovery. Complete initial setup wizard and install google play store APK from here. It is just regular apk install from file manager.
Download SuperSU2.78 from this link and flash it from TWRP recovery to get root access.
Comments about 19S ROM
Battery life is stunning. Standby time is also good. Great progress by EUI team. By the time this reaches perfection, another new phone would be out and we would be back to square 1.
Just a quick question,
Which recovery is working with Indian phone model x821
Whenever I am flashing a twrp, it is getting replaced with stock recovery
ok I've just installed this and my twrp teamspain 5.8 is replaced by stock recovery plz post a link for the twrp you used
i need it asap
Anyone test the LTE and switching between band? Is good as Indian roms?
ArctiX said:
Is there any multi-language pack like for the 17S?
Click to expand...
Click to collapse
The ROM include these (without flashing any pack)
Bahasa Indonesia
Bahasa Melayu
English (UK, USA)
Espanol
Francais
Portugues
Pyccknn (Russian)
Thai
Indian.
how's the fingerprint on this one? Is it good like 17s?
My experience with this ROM is good, I've installed it today without losing any data. So far no any force close and all the apps are the same (some were deleted in 016 and they didn't appear again upon installation). The method I used to flash it is described below.
Considering that everyone on this forum is at least installing TWRP and rooting their Le Max 2, to install 019s (or any EUI stock) without losing data you might want to follow these steps:
1) In SuperSU go to Settings and press "Full unroot". Also there select to restore the stock boot image.
2) Reboot the system.
3) Reboot again but in TWRP this time.
4) In TWRP, press Reboot to system and when asked to disable TWRP with the stock recovery, press "Allow disable". The TWRP will be replaced with stock recovery, thus you don't need any stock recovery.img to come at this state (this is why I think TWRP by TeaMSpaiN is very good because it is asking always to restore or not).
5) Copy the EUI 019s to internal storage and rename it to update.zip.
6) Reboot in recovery and select Update, without selecting clear data.
7) Once updating is completed, download the SuperSU 2.78 and place it to internal storage.
8) Reboot in fastboot and connect your phone to the computer and install TWRP 5.8 TeaMSpaiN.
9) After installation, reboot in recovery by the following command: fastboot boot TWRP_5.8_TeaMSpaiN.img
10) Once in TWRP, install SuperSU 2.78, xposed framework and whatever you need and reboot.
In this way I managed to install it as an update from a rooted phone with TWRP to a newer system with root and TWRP and without losing any data.
First impressions:
- old theme selection is back, it's better
- Harassment filter in Phone Manager
- Notes on desktop have been fixed. Before when I pressed "Stick to desktop", only the first line was shown in the note, now the full text is displayed.
- In Camera the "VIDEO" and "PHOTO" texts are back
- Still waiting for English language in User Manual and System Update.
- Fingerprint is as good as with 017s.
Looks like the EUI has improved a lot, it's becoming more mature and feature rich. Hopefully our Le Max 2 phones will last to see the system even better.
Many thanks sanke1 for sharing the ROM with us.
valy_cta said:
My experience with this ROM is good, I've installed it today without losing any data. So far no any force close and all the apps are the same (some were deleted in 016 and they didn't appear again upon installation). The method I used to flash it is described below.
Considering that everyone on this forum is at least installing TWRP and rooting their Le Max 2, to install 019s (or any EUI stock) without losing data you might want to follow these steps:
1) In SuperSU go to Settings and press "Full unroot". Also there select to restore the stock boot image.
2) Reboot the system.
3) Reboot again but in TWRP this time.
4) In TWRP, press Reboot to system and when asked to disable TWRP with the stock recovery, press "Allow disable". The TWRP will be replaced with stock recovery, thus you don't need any stock recovery.img to come at this state (this is why I think TWRP by TeaMSpaiN is very good because it is asking always to restore or not).
5) Copy the EUI 019s to internal storage and rename it to update.zip.
6) Reboot in recovery and select Update, without selecting clear data.
7) Once updating is completed, download the SuperSU 2.78 and place it to internal storage.
8) Reboot in fastboot and connect your phone to the computer and install TWRP 5.8 TeaMSpaiN.
9) After installation, reboot in recovery by the following command: fastboot boot TWRP_5.8_TeaMSpaiN.img
10) Once in TWRP, install SuperSU 2.78, xposed framework and whatever you need and reboot.
In this way I managed to install it as an update from a rooted phone with TWRP to a newer system with root and TWRP and without losing any data.
First impressions:
- old theme selection is back, it's better
- Harassment filter in Phone Manager
- Notes on desktop have been fixed. Before when I pressed "Stick to desktop", only the first line was shown in the note, now the full text is displayed.
- In Camera the "VIDEO" and "PHOTO" texts are back
- Still waiting for English language in User Manual and System Update.
- Fingerprint is as good as with 017s.
Looks like the EUI has improved a lot, it's becoming more mature and feature rich. Hopefully our Le Max 2 phones will last to see the system even better.
Many thanks sanke1 for sharing the ROM with us.
Click to expand...
Click to collapse
Is this rom is compatible for le 1s?????? Or not
EXPERIMENTAL AND MOST LIKELY BROKEN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Android "Q" is the upcoming ninth major version of the Android operating system. It was first announced by Google on March 2019, and the first developer preview was released on the same day. The second developer preview is expected to be released at the next Google I/O developer conference.
[more stable] Pixel: Ported from Pixel 2 firmware (walleye)
Generic: Ported from Google GSI with gapps
GET UPDATES FROM: https://t.me/androidqgsi
Requirements :
Treblized device with 8.1 or P vendor
Global Bugs :
VoLTE
Device specific Bugs :
...
Instructions :
for A-Only :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Flash FixZygote.zip
Reboot
for AB :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Reboot
Downloads :
Q Developer Preview
Notes :
Fix gapps: install google play services with "adb install"
if images didn't worked properly post your logs(logcat and console-ramoops) on telegram group i'll come for help : @androidqgsi
Logcat without PC: take /data/local/tmp/logs/log
Enable adb before boot using this command in TWRP:
Linux/mac :
Code:
adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
Win :
Code:
adb push C:\Users\<userName>\.android\adbkey.pub /data/misc/adb/adb_keys
Donate:
My paypal: https://www.paypal.me/erfanoabdi
Tested on:
give me logs if didn't worked, or donate me a device
Tested by myself:
Moto Z (A-only)
Moto X4 (AB)
Thanks
ENJOY!
[DEV-ONLY] Bug Fixing
NVM
Ah actually this is ridiculous to have bug fixing post here, and i hate my port, real P GSI shouldn't done like this. but anyway this is ported from closed source P and i can point in most popular fixable bugs here...
by looking into logs(adb logcat -b all) if we see :
1) library "libxxxxxxxxx.so" not found
fix of this error is very simple as you guys all know we just need to put needed lib from system image of base rom in https://github.com/erfanoabdi/P_sem...GSI_Patches/Vendor/P Blobs/POST-sGSI_1/vendor
and zip up "POST sGSI 1" with new libs
Feel free to make pull request new libs in github
2) cannot locate symbol :
for example LG RIL error was like this:
Code:
CANNOT LINK EXECUTABLE "/vendor/bin/hw/rild": cannot locate symbol "_ZN7android8hardware5radio4V1_08toStringENS2_22CdmaSmsWriteArgsStatusE" referenced by "/vendor/lib64/[email protected]"...
a) here we need to find where is unknown symbol located in 8.1 system image
so in terminal goto system/ and :
Code:
grep -r "_ZN7android8hardware5radio4V1_08toStringENS2_22CdmaSmsWriteArgsStatusE"
output in this case is :
Code:
Binary file lib/[email protected] matches
Binary file lib64/[email protected] matches
(here you may get long list of blobs, only find and grab needed ones)
b) now just copy libs to vendor and rename them
in this case i renamed [email protected] to [email protected]
***important rule keep string name same as original file only replace one letter (a->W)***
c) and sed renamed lib (in my case) :
Code:
sed -i "s/[email protected]/[email protected]/" "P_semiGSI/POST_sGSI_Patches/Vendor/P\ Blobs/POST-sGSI_1/vendor/lib/[email protected]"
sed -i "s/[email protected]/[email protected]/" "P_semiGSI/POST_sGSI_Patches/Vendor/P\ Blobs/POST-sGSI_1/vendor/lib64/[email protected]"
we're almost done here
d) now open POST-sGSI_2 and sed "referenced by" lib from error line in log
like this : https://github.com/erfanoabdi/P_sem...ETA-INF/com/google/android/update-binary#L154
e) and zip up "POST sGSI 1/2" with new libs
Feel free to make pull request new libs/hax in github
3) more...
NVM
WIKI : https://github.com/erfanoabdi/P_semiGSI/wiki
i hope we get a full GSI eventually one P is released, been waiting a while for this. at least now its semi done, it should be easier to create a full GSI for kirin (aka my H9) and MTK devices.
Hi, will it support Honor9?
I'm waiting for kirin chipset supported gsi
Dumpling- Needs mokee vendor
waiting support kirin960 and more?
Sent from my Honor V9 using XDA Labs
Jamie_oppo said:
Do you need to be a on a treble rom before flashing this?
Ive got a 5t (dumpling) and flashed the open beta which gave treble. Then flashed a normal custom rom. I tried all the zip at this point and no luck decrypted.
Click to expand...
Click to collapse
Same phone here, I flashed the rom, but it reboots every time to the bootloader...
ChristiaanP said:
Same phone here, I flashed the rom, but it reboots every time to the bootloader...
Click to expand...
Click to collapse
were u on a treble rom? Or normal non treble custom rom
Edit: apparently ob 11 vendor image is broken and mokee one boots.
Jamie_oppo said:
were u on a treble rom? Or normal non treble custom rom
Edit: apparently ob 11 vendor image is broken and mokee one boots
Click to expand...
Click to collapse
I was on OB 11
Awesome... btw Currently booting phones
Mi 5 (gemini)
Redmi 4 Prime (markw)
Redmi 4x (santoni)
Redmi 3s/3x/Prime (land)
Zuk Z2 Plus (z2_plus)
Redmi Note 4 sd (mido) (Tested on PE and Lineage-ex vendors)
Lenovo P2 (kunato)
Redmi Note 5 Pro (whyred) (With mokee vendor)
Mi 6 (sagit) LG V30 (h930)
Redmi 5 Plus (vince) (Tested with cardinal-aosp vendor)
Exynos S9+ (Unstable as **** as its not QCOM)
Redmi 4A (rolex) (crDroid Treble)
OnePlus 5/T (Only one user has reported it to work with proof though)(Mokee trees)
Bugs for land or all devices!
- half volte is working (only outgoing call and volume for jio left to fix)
- app opening time is extra
None volte users r really lucky
Also jio4gvoice app is not working
Update for DP5
THE MEGAPOST OF NOTES FOR THE P GSI HERE
Wiki page: https://github.com/erfanoabdi/P_semiGSI/wiki/OnePlus-5T and https://github.com/erfanoabdi/P_semiGSI/wiki/OnePlus-5 (Thanks to timocapa)
OnePlus 5/5T users, you MUST be decrypted in order to boot this GSI. This means flashing the noverity zip and formatting data. The link to the zip which I used to get it working is here: https://drive.google.com/file/d/1BtZKnNc2ooe9lcDd0JJ8eHzylA0StSm2/view The recovery I am using is the latest codeworkx recovery here: https://sourceforge.net/projects/ch....1-0-20180414-codeworkx-dumpling.img/download for dumpling and https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download for cheeseburger.
Some things to take into consideration before I followed these steps: I was using OB11 as my daily driver since it's release and I have always been encrypted.
This is exactly how I managed to get it booting on my 5T:
1) format data to remove encryption (I'm on OOS OB11 before doing this)
2) reboot recovery
3) factory reset
4) flash Mokee ROM (latest nightly)
5) flash noverity zip
6) reboot into OS
7) get past set up and reboot into TWRP
8) factory reset
9) install P GSI
10) mount vendor
11) install all the latest POST zips in the order of 1 to 3
12) reboot into OS
OPTIONAL: After you have booted into Android P and the lockscreen shows. You can reboot back into TWRP and install the latest BETA version of Mqgisk
Click to expand...
Click to collapse
Alternative instructions if you are getting kicked back into the recovery with the display log saying "RescueParty", do all of the above but replace step 11 with the steps below (Thanks to @jelousdogs for his method):
11) Flash POST Zip 1,2 (Dont flash zip 3 Yet)
12) Reboot to system (You will see the rom booting and reboot to recovery suddenly)
13) Flash POST zip 3 in recovery and reboot to system
If this STILL does not work, try this: After completing all of these steps, mount vendor partition in TWRP, then use the TWRP File Manager. Copy the build.prop file from the vendor partition to your internal storage (/sdcard) and move it to your PC via MTP in recovery. Add "persist.sys.disable_rescue=true" (without quotes) to the bottom of the build.prop file you have just copied to your PC. Save and transfer it back to your internal storage. Copy the build.prop from your internal storage to /vendor, replacing the original file. Press on the build.prop file in your /vendor partition and press "chmod". Remove all of the "0000" numbers in the text box and type "0600", then confirm the chmod. Reboot to the OS.
Click to expand...
Click to collapse
DIRTY FLASHING DP5 FROM DP4 (Thanks to timocapa):
1) reboot into TWRP and flash the DP5 GSI.
2) reboot into the OS.
Simple as that.
Click to expand...
Click to collapse
Notes:
- If you get kicked into recovery after trying to boot the GSI, look at TWRP's display log where flashable zip text are printed out and see if "init_user0_failed". This means you are encrypted and the GSI is having trouble with it. You must be decrypted as said above.
- Yes, this includes the new gesture pill nav bar. SETTINGS > SYSTEM > GESTURES > SWIPE UP ON HOME BUTTON (Your stock launcher must be working, i.e. not Force Closing, in order for this to work because the new overview app switcher is part of the stock Pixel Launcher).
- Weird software issues like apps not opening, random FCs, settings going blank? Try a factory reset in TWRP and reboot to see if it has fixed any problems!
Click to expand...
Click to collapse
Known bugs confirmed by a number of 5/t users:
- Potato quality camera, you can use GCam to remedy the problem but expect blue dots in HDRmode (OnePlus problem)
- Front facing camera can only be used in OOS camera (wait for official sources)
Click to expand...
Click to collapse
To get rid of the three persistent notifications:
1) install GMS update (https://www.apkmirror.com/apk/googl...2-8-72-100400-202717283-android-apk-download/)
2) Tap on the blue finishing setup notification and connect to wifi, then force close the pixel setup so it re-appears again
3) Go to settings > accounts > sign into google
4) Tap on the blue notification again and you should be able to go further than "pixel is finishing setup" page.
5) Force stop play store to remove the play store persistent notification
Click to expand...
Click to collapse
Hope this helps other OP5/5T users out there who are having trouble booting this.
Can someone tell me if boot this rom on mi mix2s It is able for treble rom i tryied to flash but doesnt boot.
Reserved for review
Boots
Could someone please tell me if this is a Pixel experience in terms of new nav gestures+copy/paste in multitasking overview?
unrealmac said:
Could someone please tell me if this is a Pixel experience in terms of new nav gestures+copy/paste in multitasking overview?
Click to expand...
Click to collapse
No
ZeroInfinity said:
OnePlus 5/5T users, you MUST be decrypted in order to boot this GSI. This means flashing the noverity zip and formatting data. The link to the zip which I used to get it working is here: https://drive.google.com/file/d/1BtZKnNc2ooe9lcDd0JJ8eHzylA0StSm2/view The recovery I am using is the latest codeworkx recovery here: https://sourceforge.net/projects/ch....1-0-20180414-codeworkx-dumpling.img/download for dumpling and https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download for cheeseburger.
This is exactly how I managed to get it booting on my 5T:
1) format data to remove encryption (I'm on OOS OB11 before doing this)
2) reboot recovery
3) factory reset
4) flash Mokee ROM (latest nightly July 15th is what I used)
5) flash noverity zip
6) reboot into OS
7) get past set up and reboot into TWRP
8) factory reset
9) install P GSI
10) mount vendor
11) install all the latest POST zips in the order of 1 to 3
12) install in-call audio fix
13) reboot into OS
OPTIONAL: After you have booted into Android P and the lockscreen shows. You can reboot back into TWRP and install magisk. I recommend this version as it was the only one working for me: https://drive.google.com/open?id=10LV_j43YUmmHNe0PjE_GNo9kkb-1gAnD
Notes:
- If you get kicked into recovery after trying to boot the GSI, look at TWRP's display log where flashable zip text are printed out and see if "init_user0_failed". This means you are encrypted and the GSI is having trouble with it. You must be decrypted as said above.
- If you get kicked into recovery and TWRP's display log shows something about RescueParty, flash the POST 3 zip again and rebooting. You might want to try this 2-3 times if it did not work the first time.
- Yes, this includes the new gesture pill nav bar. SETTINGS > SYSTEM > GESTURES > SWIPE UP ON HOME BUTTON
Bugs that I have encountered personally but may not affect you, need confirmation:
- MTP isn't working, even with the workaround.
- ADB is detected but when doing "adb devices", it will stay on the "connected" status so you can't issue any adb commands via PC.
- Fingerprint not even detected, no option to enrol in security settings.
To get rid of the three persistent notifications:
1) force stop pixel setup in app settings
2) install GMS update (https://apkdot.com/apk/google-llc/g...s-12-8-66-100400-200774163-beta-041/download)
3) when the blue notification appears again, open it and connect to wifi
4) force stop pixel setup again
5) the next time the notification appears, it should allow you to finally finish the setup
Hope this helps other OP5/5T users out there who are having trouble booting this.
Click to expand...
Click to collapse
Thanks! It worked!
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps to Install Pixel Experience Plus GSI Android 13 on Samsung Galaxy S20 SCG01 Japan
Note: I am not the Developer I am sharing…
-Almost everything,
Fingerprint Working
Face unlock not Working only on A13
Phh setting Qualcomm Enable (use alternative audio policy ) unleash the power of snapdragon Audio Clarity for Music Lover
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Links
Odin https://www.odinflash.com/download
TWRP Recovery TWRP 3.7.0_12
Vbmeta_disabled Download
Pixel Experience GSI Download full https://github.com/ponces/treble_build_pe/releases
Magisk Download
Unlock the bootloader
1. Go to your phone's settings
2. Scroll down and click on the "About phone" section
3. Click on "Software information"
4. Tap on the build number several times until you see a message saying "Developer mode has been turned on"
5. Go back to the settings homepage
6. Scroll down to the very bottom and select the "Developer options" section
7. Enable the "OEM unlocking" option
8. Scroll down and enable the "USB Debugging" Option
9. Connect your phone to your computer with a USB cable
10. Turn off your phone
12. Connect Use to only in PC press volume up + volume down at the same hold same time now connect C port to Phone
13. When you see the blue "Warning" screen, long press the volume up button to unlock bootloader
14. After the reset, start a new device setup and connect only to the internet skip all.
15.Enable Developer option if you can see Bootloader unlock tick Now good to go.
Install TWRP Custom Recovery
16. Open Odin
17. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled.tar in USERDATA Start Flash. (If failed you are not connected internet after Unlocked Bootloader so Follow up 14)
18.Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
19.Go to Advanced > Terminal, type: multidisabler. (You will see " - Finished." When it is done.)
20.Go to wipe, format data, and type "yes" to confirm.
21.go Back Select "Dalvik / ART Cache" "Data" and "Cache”.
21. Reboot to TWRP
Install Pixel Experience GSI
22. Extract Pixel Experience file now you can see IMG file change name to system.img
23. Copy the system.img and Magisk files to internal storage.
24. TWRP Click Install and down below you can see INSTALL IMAGE choose system.img path is System.
25. Flash Magisk and reboot.
79. Set-up your new ROM !!
ENJOY !!!
To fix safty net (very important) no ned to flash any file.
1. flash magisk after reboot update the magisk and hide magisk manage reboot.
2. Now enable zysik in magisk setting choose play store and play services clear data for both reboot bhammmmm your safetynet is fixed.
SCREEN SHOT
To avoid any confusion between this and full ROMs that include kernels, I have changed the title of your post to appropriately reflect that this is a GSI.
Thanks.
Does this work on g986n
Does this work on g986n
DesrtSailor said:
Does this work on g986n
Click to expand...
Click to collapse
You can try it's an GSI ROM. use this recovery for your Model
https://androidfilehost.com/?w=files&flid=316866
Great one bro. Will VOLTE & all the functions in camera works?
There are 3 versions of gsi available. Normal, lite, vndklite. Which one we need to flash?
Pixel Experience GSI download requires authorization
please post the kernel version screen shot.
psychem said:
please post the kernel version screen shot.
Click to expand...
Click to collapse
bnskdd said:
Pixel Experience GSI download requires authorization
Click to expand...
Click to collapse
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
pratheepdx said:
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
Click to expand...
Click to collapse
Successfully swiped in, thank you for your contribution
High refresh rate working?
The updater function is not working.
Fingerprint sensor is not detecting finger, keeps saying lift and re touch again.
120 fps working finger print is working with latest firmware SCG01KDU1CVG3. try to flash latest stock firmware which is mentioned above and try again.
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix it..
Olink007 said:
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix
Click to expand...
Click to collapse
Do you have tempered glass for your screen or something else? its happens to me as well even with Stock Firmware once removed the issue was resolved for me I've verified that the Pixel GSI Android 13 Fingerprint works without any issue and Android 12 GSI Face Unlock and fingerprint both function flawlessly.
Does this work on s20 ultra snapdragon G9880 ?
Does it support Adaptive brightness? cause I can't find it in the settings.
paazoka said:
Does this work on s20 ultra snapdragon G9880 ?
Click to expand...
Click to collapse
If your bootloader unlockable of course this GSI will work. Try at your own risk.
Why? Custom Super.tar
-Flash system GSI is normal process but Flash Custom Super.tar is not.
Our sources: @xyrn23
https://github.com/ponces/treble_build_pe/releases/tag/v2023.03.29-plus
Note:
》Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
》Why FW XXU1CWA2 ?
-it's the last Firmware for T220 & T225 which can downgrade.
= The T220.T227 can't uses my "Custom super.tar"
SM-T225
( XXU1CWA2 )SM-T220
( XXU1CWA2 )odm.img 4349952odm.img 4349952product.img 1238544384product.img 1234505728vendor.img 652824576vendor.img 640036864super.raw 6094323712super.raw 6023020544
-------------------------
☆☆☆ Howto install?
1. Flash Firmware "T225XXU1CWA2" with Odin.> connect internet reboot then enable "OEM unlocking" + "USB debugging" + configure update Magisk.
(update 3in1.tar with Magisk v.26.1)<- Download from Attachment below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Flash "super.tar" at AP Slot. [ PixelExperience_Plus_arm64-ab-vndklite-13.0-20230329]
4.94 GB file on MEGA
mega.nz
☆☆☆- you will get "Pixel Experience Plus 13.0" with R/W Super Partition ( can modify "Product" "System" "Vendor") plus frees up a same amount of free space in /system or different ones =150 MB/each.
☆☆☆-Auto Screen Brightness. is ready to use.
By Enable:
1.Setting>System>Status bar > Enable Brightness slider.
2.Setting>Status bar > Enable Auto Brightness. (Show auto brightness button)
3. Set Developer Options: Smallest width= 723 dp
3. Configure bluetooth devices.
=》Bluetooth devices.(Headphone / True Wireless)
Enable Phh Treble Settings (Misc features)
☆☆☆ Do Enable the same as I show below.☆☆☆
-Use alternate way to detect headsets.
-use System Wide BT HAL
-reboot
4. Task menu came with "Recent apps" -had changed itself from your last selected app.
***Don't set Smallest width = 598 dp , you will lost ability of Multi-tasking Menu.
The Purpose of this type menu is for Multi-tasking windows. ( Split screen apps).
5. Google assistant can call from your contact number. (After update all Google apps .)
6. Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
7. Can setup "always show keyboard"
8. Battery usages does not conflict with Auto screen brightness and specific every duration.
9. Charging when power-off device.
it can cut-off (break) informed warranty bit error state. (below)
10. Test before updating.
Its supported Vega Bobo DSU.
11. Phone Calling sound when we wear earbuds or headphone.
Samsung buds 2 earbuds with no problem through calling sound > Calling sound can came from both tab and inside buds2. Same can uses microphone from buds 2 also. ( Call Google assistant)
12.TV Casting with nightly VLC.
13. MTP USB on Dev Option.
Default USB configuration
-USB
Select File transfer/Android Auto
(U can transfer files with Computer.)
14. How2update without lost historical data.
-Update Pixel Experience Plus 13.0 v2023.04.21 Download
Dirty flash
Code:
adb devices
adb reboot fastboot
fastboot flash system PixelExperience_Plus_arm64-ab-vndklite-13.0-20230421-UNOFFICIAL.img
reboot system.
Dirty Update✓ NEW fastbootD- Recovery_patched For T225XXS3CWC2
Download from Attachment below.
The Competitor you must try.✓The crDroid 9.4 A13 GSI .
✓The LineageOS 20 TD
✓The sparkOS GSI.
✓ The Alpha Droid A13 GSI.
(Unofficial)
Release v20230419 · ChonDoit/treble_alphadroid_patches
| Sync with sources | Fixed Settings Crash
github.com
Extended Features From
"Pixel Experience Plus"Note: Only the bad thing is not yet supported "exFAT sd card", and Google Assistant Bugs.
1. Task menu came with "Recent apps"
2. Auto screen brightness.
3. ADB ROOT Menu from Developer options.
4. Control Google Services GMS & Core.
Smart Charging. ( Set max
Waiting For Next version.
}=================={
All my tutorial. (Link)
CustomAPFastbootDLineage OS TD GSIPixel Experience GSISpark OS GSImicroG with GSITWRP for A11
How2 ? install Lineage OS "TD" with SM-T225.(Samsung Tablet)
Light doesn't have VNDKLite builds.
Click to expand...
Click to collapse
Light doesn't have Old PHH Treble Setting.
Click to expand...
Click to collapse
This light build has never worked for any Samsung tablets since the dev has expressed his disinterest in making it compatible.
Sure, it flashes successfully...but it always does get stuck on the boot screen. There is nothing that can be done at this point
Click to expand...
Click to collapse
Actually I believe offline charging display isn't working at all, and whether it charges while the logo freezes depends on the device.
Click to expand...
Click to collapse
In "Light" I didn't do any special treatment to offline charging, whereas TD-based does have a few related patches.
Click to expand...
Click to collapse
All of this came from XDA.
Begin with "what does variant to use ?"
More...
LOS 20 Treble Droid.
new pop up Task menu.
Is this only for t225 ? How about t220 ? Thanks
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
fonixmunkee said:
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
Click to expand...
Click to collapse
ok same environment as when i used A11 TWRP with ( OTG Mouse). but this time (no have A13 TWRP for T225), then my best friend is always Odin and fastbootD. Don't worry about it.
abc1054 said:
Is this only for t225 ? How about t220 ? Thanks
Click to expand...
Click to collapse
I don't have T220 then can't make custom-super.tar for this device but you can uses fastbootD or fastboot mode from new TWRP.
New Competitor Alpha Droid.
CRDROID 9.4 GSI