Related
Hello,
My galaxy S2 fell and my digitizer is apparently non-working - I can see the screen sort of, but there is no touch response.
Anyway, I can't let just about anyone who I take it to have access to my data, since my contacts are stored on the google cloud, I have them all anyway, but I either need to:
1. Access the phone via PC and wipe the data by emulating the screen on my PC.
I tried using Kies air to do it - it recognizes the phone, but I can't open it through it because my phone is locked and it won't give me access otherwise. Of course I can't unlock it since the digitizer is dead.
I tried using software like droid-at-screen, installing the proper SDK components, BUT the phone never got recognized. It is my deduction that I have to enable USB debugging, which, again, I can't do since I don't have the touch interface.
2. The other solution would be to wipe all data manually, which I assumed was done holding the 2 volume buttons + power button, but all that ever got me to was the lock screen along with a "safe mode" in the corner.
I posted this in the android Q&A, since I feel this is more of an android rather than model related issue. Thank you.
If you can still see the screen enough, I think with USB OTG you can connect a computer mouse and use that to navigate to the wipe data screen
Sent from my DROID2 using xda premium
gagdude said:
If you can still see the screen enough, I think with USB OTG you can connect a computer mouse and use that to navigate to the wipe data screen
Sent from my DROID2 using xda premium
Click to expand...
Click to collapse
Thanks for the reply.. I don't think any of those are available where I can get them though :/
Posklapenzi said:
Thanks for the reply.. I don't think any of those are available where I can get them though :/
Click to expand...
Click to collapse
use adb
adb pull
adb pull /sdcard/ or pull /data and datadata
xsenman said:
use adb
adb pull
adb pull /sdcard/ or pull /data and datadata
Click to expand...
Click to collapse
Thank you. I assume this is some kind of cmd that I run from adb.exe once I install it through the SDK?
Posklapenzi said:
Thank you. I assume this is some kind of cmd that I run from adb.exe once I install it through the SDK?
Click to expand...
Click to collapse
yup, you can get a guide from My Guides and Manuals for ADB knowledge and just use a adb.exe
xsenman said:
yup, you can get a guide from My Guides and Manuals for ADB knowledge and just use a adb.exe
Click to expand...
Click to collapse
Thank you, just one question - do I need degugging turned on for this as well? Because like I said, I am unable to do that.
Posklapenzi said:
Thank you, just one question - do I need degugging turned on for this as well? Because like I said, I am unable to do that.
Click to expand...
Click to collapse
yup, adb will only work with debugging enabled, just try you might have left it enabled
xsenman said:
yup, adb will only work with debugging enabled, just try you might have left it enabled
Click to expand...
Click to collapse
Turns out I do not.. is there any hope for me left? Somehow wipe the entire memory manually?
Posklapenzi said:
Turns out I do not.. is there any hope for me left? Somehow wipe the entire memory manually?
Click to expand...
Click to collapse
I'm in the same position, so I'll be watching to see if there is hope
loopism said:
I'm in the same position, so I'll be watching to see if there is hope
Click to expand...
Click to collapse
Bumping this, I've yet to find a solution..
Posklapenzi said:
Bumping this, I've yet to find a solution..
Click to expand...
Click to collapse
Are you sure there are no USB OTG cables available for you? They're like $5 online
Sent from my DROID2 using xda premium
i want to root my zen ultrafone 101 dual sim android phone but i am unable to root it so please help me root this device. it is very urgent.
please help me in this please
dineshjumani said:
please help me in this please
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7&styleid=18
Klown80 said:
Try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7&styleid=18
Click to expand...
Click to collapse
but my android version is 2.3.5 will this work on that version
Klown80 said:
Try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7&styleid=18
Click to expand...
Click to collapse
did not work o my phone it shows device not found
dineshjumani said:
did not work o my phone it shows device not found
Click to expand...
Click to collapse
Yes it works on 2.3.5 IT sounds like you need to install drivers for your device first and you need to enable USB debugging first. For help installing drivers you may try Snap Pea, it helps install generic drivers that may work for you.
Klown80 said:
Try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7&styleid=18
Click to expand...
Click to collapse
Klown80 said:
Yes it works on 2.3.5 IT sounds like you need to install drivers for your device first and you need to enable USB debugging first. For help installing drivers you may try Snap Pea, it helps install generic drivers that may work for you.
Click to expand...
Click to collapse
still the same error
error:device not found
what to do now please help
dineshjumani said:
still the same error
error:device not found
what to do now please help
Click to expand...
Click to collapse
You still need drivers, that did not work. The error device not found is because the PC cant see the phone as connected.
Klown80 said:
You still need drivers, that did not work. The error device not found is because the PC cant see the phone as connected.
Click to expand...
Click to collapse
i tried to root manually using adb but now the problem which occured is it shows permission denied and other one is read-only system
what do do in this matter please help
and the phone is zen ultraphone 101 android 2.3.5
it is a spreadtrun sc6820 china model how to root this device please help
dineshjumani said:
i tried to root manually using adb but now the problem which occured is it shows permission denied and other one is read-only system
what do do in this matter please help
and the phone is zen ultraphone 101 android 2.3.5
it is a spreadtrun sc6820 china model how to root this device please help
Click to expand...
Click to collapse
please help me in this matter please no one in xda forum is available to solve my problem does not any one know how to do this
i want to root my zen ultrafone 101.
i cant able to connecte it in debuging mode..pls provide me driver..
driver need
same problem ..i want driver of zen ultrafone 101..plzz
Hi Please Help me I cant open some app in my phone ultrafone 101.
Hi
My phone is not opening some app like play store
its giving massege like this : Sorry! The application has stopped unexpectedly. System failed to repair the error. Please use other software.
Please Help me.:crying:
Way to Root Zen Ultrafone101(Sad for posting so late)!
Before the process:
First, Rooting voids warranty, I will not be responsible for any loss caused while following this tutorial.
Second, your phone needs to have battery above 80% before starting the process.
Third, this tutorial requires a PC (I used a Windows PC )
I rooted my ultrafone 101 two years ago following this method:
First off, you need to download drivers for your device. For that, download ADB Driver installer for PC. Then run it while you have connected your phone wIth a usb cable and also usb debugging mode is enabled in your phone. It will take some time to finish.
Next step is to download an PC software Mobogenie. Opening it will start the connecting process, in which it automatically installs its Android Mobogenie app in your phone, and you are connected.
Then go to 'Tool kit' from menu in the left column.
Click on One Click Root icon. Wait sometimes until it is downloaded. Progress of download will be shown under the icon and when finished it will pop up automatically.
Then just click on root now, if everything is fine, you will get root access within three minutes. After this, disconnect the phone and take a reboot.
Hello everyone,
This is my first post to this forum but I've been reading some pretty good solutions over here. I hope someone will be able to help me out with the problem I'm having with my Motorola Razr I (Android Jelly Bean, not rooted, bootloader locked, USB debugging enabled).
I'm having a problem with unlocking my phone. Some of my friends tried to unlock the pattern but after 20 failures the phone blocked. Now I have to submit my google login so I can get back on it. The problem with that was that I was on vacation abroad so my 3G and wifi were both turned off. I've read about other problems like this and came to a point where I was trying to turn on my wifi with adb. I found that I could use the command "svc wifi enable" and I tried this several times, every time with the same result: I think the command starts but then gets killed before it finishes.
Anyone who has any idea what causes the kill or how I could solve this? I have included a screenshot of what happens. I hope someone could help me out here.
Thanks in advance,
Tim
Wonano said:
Hello everyone,
This is my first post to this forum but I've been reading some pretty good solutions over here. I hope someone will be able to help me out with the problem I'm having with my Motorola Razr I (Android Jelly Bean, not rooted, bootloader locked, USB debugging enabled).
I'm having a problem with unlocking my phone. Some of my friends tried to unlock the pattern but after 20 failures the phone blocked. Now I have to submit my google login so I can get back on it. The problem with that was that I was on vacation abroad so my 3G and wifi were both turned off. I've read about other problems like this and came to a point where I was trying to turn on my wifi with adb. I found that I could use the command "svc wifi enable" and I tried this several times, every time with the same result: I think the command starts but then gets killed before it finishes.
Anyone who has any idea what causes the kill or how I could solve this? I have included a screenshot of what happens. I hope someone could help me out here.
Thanks in advance,
Tim
Click to expand...
Click to collapse
maybe You should try: adb shell svc wifi enable
jakuburban said:
maybe You should try: adb shell svc wifi enable
Click to expand...
Click to collapse
Thanks for the reply.
I already tried to execute the command directly like you suggest though. When i do this, adb just responds with 'Killed' and I don't even get the 'svc wifi enable'-response.
Any other ideas?
Tim
Wonano said:
Thanks for the reply.
I already tried to execute the command directly like you suggest though. When i do this, adb just responds with 'Killed' and I don't even get the 'svc wifi enable'-response.
Any other ideas?
Tim
Click to expand...
Click to collapse
Well in this situation I would root Your phone (I don't know how to do this with motorola) and delete the gesture security files.
Wait, the gmail login didn't need internet access to unlock the device. It just reads saved password on Your device.
I read some other things about people having the same problem with loging in with their google-account and normally your phone needs internet access to verify the username and password. That is why I want to enable the wifi with adb. Do you think there is no other solution than rooting or doing a factory reset?
Tim
Wonano said:
I read some other things about people having the same problem with loging in with their google-account and normally your phone needs internet access to verify the username and password. That is why I want to enable the wifi with adb. Do you think there is no other solution than rooting or doing a factory reset?
Tim
Click to expand...
Click to collapse
If You say so. My friends blocked my phone only twice like this and I hadn't problem unlocking it.
However if You can't turn on wifi (maybe try data) that's what I would do in this situation.
It seems that I need an internet connection to login with my google-account. I also tried to enable data but I'm getting exactly the same thing as with wifi.
Anyway, thank you for your reply. If someone else could come with a solution, I would be very grateful.
Tim
Wonano said:
It seems that I need an internet connection to login with my google-account. I also tried to enable data but I'm getting exactly the same thing as with wifi.
Anyway, thank you for your reply. If someone else could come with a solution, I would be very grateful.
Tim
Click to expand...
Click to collapse
Is there CWM in motorola when using stock ROM?
jakuburban said:
Is there CWM in motorola when using stock ROM?
Click to expand...
Click to collapse
I don't think there is.
If there ever would be people experiencing the same problem (which I doubt because I didn't find very much on this topic): I think you just can't execute the command when you're not rooted. I decided to root the device and when I finished I tried the "svc wifi enable"-command after issuing "su", and it fully finished the command.
Just to complete the thread.
Tim
Adding to this 3 year old thread, now if you are running SELinux in Enforcing mode, you must switch to Permissive mode for the "svc wifi enable/disable" command to work. This is for the next person who finds this thread while Googling as I did .
hi,
plz help
mine is hox+ device which is rooted
not able to connect with usb port now, doesn't show anything on my windows file explorer
moreover my mobile shows white screen with htc logo and just hangs
I tried factory reset, even though of no use
have used all-in-ont-tool-kit-2.3
tried with adb commands as well
please advice and help to recover my device. I have backup of boot.img on my pc
MyHOX said:
hi,
plz help
mine is hox+ device which is rooted
not able to connect with usb port now, doesn't show anything on my windows file explorer
moreover my mobile shows white screen with htc logo and just hangs
I tried factory reset, even though of no use
have used all-in-ont-tool-kit-2.3
tried with adb commands as well
please advice and help to recover my device. I have backup of boot.img on my pc
Click to expand...
Click to collapse
Do NOT make double threads of the same topic, you already made one : http://forum.xda-developers.com/showthread.php?p=46837019#post46837019
Ghand0ur said:
Do NOT make double threads of the same topic, you already made one : http://forum.xda-developers.com/showthread.php?p=46837019#post46837019
Click to expand...
Click to collapse
sorry, this is the only thread I made to get response as quickly posted.
its true that I did post same content in other thread
I am desperate the recover my phone and looking for help. plz advice
Today, I wanted to root my phone back after a MIUI update WITHOUT MY PERMISSION. So I lost my root and my custom recovery. So I went to my PC and do the same way I always do. But somehow, this time I boot my device into fastboot and the PC didn't detect my device. Before it worked just fine rooting my device. Now, I tried other ways but still the same problem, it didn't detect my device. Can someone please help me? I really really need the root for my phone. I don't know if it's about the low battery or any other problem. My device is currently in MIUI Global 9.5 | Stable | 9.5.3.0(MHOMIFA)
Please help! ??
DeLione said:
Today, I wanted to root my phone back after a MIUI update WITHOUT MY PERMISSION. So I lost my root and my custom recovery. So I went to my PC and do the same way I always do. But somehow, this time I boot my device into fastboot and the PC didn't detect my device. Before it worked just fine rooting my device. Now, I tried other ways but still the same problem, it didn't detect my device. Can someone please help me? I really really need the root for my phone. I don't know if it's about the low battery or any other problem. My device is currently in MIUI Global 9.5 | Stable | 9.5.3.0(MHOMIFA)
Please help!
Click to expand...
Click to collapse
Have u enable usb debugging in developer setting...?
dinoredfield said:
Have u enable usb debugging in developer setting...?
Click to expand...
Click to collapse
Yes I did. But it seems not to work too. Any other thing that I missed? The bootloader was unlocked long ago.
DeLione said:
Yes I did. But it seems not to work too. Any other thing that I missed? The bootloader was unlocked long ago.
Click to expand...
Click to collapse
Try this.. its a simple way to enter the edl mode from fastboot..
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
dinoredfield said:
Try this.. its a simple way to enter the edl mode from fastboot..
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
Can I root my phone using edl? I never used or heard that before.