After update with ICS 4.04, the phone can no longer connect with the handsfree of car (blue & me). This requires pairing with a random code to be inserted. No longer appears the screen for entering the code. It seems to be a common problem for all devices xperia with ICS. There are news and solutions?
Android 2.3.4 worked fine ...
In my case everything was OK with the first ICS release. But after the update to "B" version, I can't access the contact list in my car any longer.....
This is the temporary solution I found:
1) Turn on bluetooth on your smartphone and open a contact card.
2) Start the pairing of hands-free of the car.
3) When the blue & me asks for the code, send the contact via Bluetooth: The phone searches for other devices. Selecting "Blue & Me", you have the opportunity to enter the code presented on the dashboard.
4) Now Blue & Me will ask you to copy the address book: Select "Yes".
5) In the notification bar of smartphone is prompted to connect bluetooth: select "do not ask for more" and accept the request.
Now the blue & me work like with gingerbread.
Since i cant post in the development section,so i decided to post my issue in here.
I have this problem which i cant access my SD card content through the music and gallery stock apps.I tried using third party apps and it still gave the same result.The apps show no content at all.Anyone have went through the same problem?Any idea how to solve this issue? :fingers-crossed:
maybe you should try it with another microSD-Card, I also had some problems with the installation, so I had to install it many times until it really worked fine...
Issue with [ROM][JB][UNOFFICIAL] CM10 BETA1, to enable USB Media device,phone storage
Neither I (noob) can post new thread with new issue discovered... So I post this here.
This is my first post on XDA forum. I have been using the ROM now for 1 week. Gracias Zeubea!!! Neither any problems with battery drain, it lasts for 2-3 days.
Here is my issue:
THe idea was to review and put some new ringtones in /system/media/audio/ folder on phone's storage.
I shut down the phone, took out the SD card and boot it.
Then I connected it via USB to WinXP PC. Windows explorer does see Removable Disk letter, but it doesn't show its contents (folders, files...).
While there is SD card on, notification in status bar appears and you can choose to turn-on USB memory storage. When there is no card in, there is no notification and you cannot choose to view folders in phone's memory, while I could do that when I had official Froyo from HTC.
I googled a bit and found some kind solution on another type of phone (i have link, but i cannot post it, since I am noob!)
via Settings/Wireless&Networks/Storage and then choose Menu button and under additional options you can find "Connect as Media Device (MTP), which is turned off by default , and when you try to turn it on, menu hangs and it forces to close. There is 3rd option in that menu which doesn't appear on that page is, Turn on USB Mas Storage which is on.
I did further some search on XDA forum and even tried code in Terminal Emulator under su rights
persist.sys.usb.config=mass_storage,adb
and nothing happened
Is this some bug that one can expect maybe will be adressed in the future?
povejmi said:
Neither I (noob) can post new thread with new issue discovered... So I post this here.
This is my first post on XDA forum. I have been using the ROM now for 1 week. Gracias Zeubea!!! Neither any problems with battery drain, it lasts for 2-3 days.
Here is my issue:
THe idea was to review and put some new ringtones in /system/media/audio/ folder on phone's storage.
I shut down the phone, took out the SD card and boot it.
Then I connected it via USB to WinXP PC. Windows explorer does see Removable Disk letter, but it doesn't show its contents (folders, files...).
While there is SD card on, notification in status bar appears and you can choose to turn-on USB memory storage. When there is no card in, there is no notification and you cannot choose to view folders in phone's memory, while I could do that when I had official Froyo from HTC.
I googled a bit and found some kind solution on another type of phone (i have link, but i cannot post it, since I am noob!)
via Settings/Wireless&Networks/Storage and then choose Menu button and under additional options you can find "Connect as Media Device (MTP), which is turned off by default , and when you try to turn it on, menu hangs and it forces to close. There is 3rd option in that menu which doesn't appear on that page is, Turn on USB Mas Storage which is on.
I did further some search on XDA forum and even tried code in Terminal Emulator under su rights
persist.sys.usb.config=mass_storage,adb
and nothing happened
Is this some bug that one can expect maybe will be adressed in the future?
Click to expand...
Click to collapse
Your funny, if you take out sdcard then try to access sdcard via USB its not going to work :banghead: because sdcard is gone, there is nothing wrong with zeubeas rom in regards to USB storage.
Oh and btw, you can't access system folder using USB mass storage mode, you can use adb on your computer to access the phones storage bits n pieces like system, data and sdcard.
For the sake of safety for your phone I think that you need to get a better understanding of how android system works before messing with your system folders!
Sent from my Legend using xda app-developers app
ranger4740 said:
Your funny, if you take out sdcard then try to access sdcard via USB its not going to work :banghead: because sdcard is gone, there is nothing wrong with zeubeas rom in regards to USB storage.
Oh and btw, you can't access system folder using USB mass storage mode, you can use adb on your computer to access the phones storage bits n pieces like system, data and sdcard.
For the sake of safety for your phone I think that you need to get a better understanding of how android system works before messing with your system folders!
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse
dear ranger; first of all, thank you for very prompt answer. Iam glad this is very live community, where you can post any question and you get answer. With all respect, in stock ROM, both HTC and some other LG model my wife owns, when you connect via USB the phone without SD card, there is notification and dialog what sort of connection to choose (you know: charge/USB storage/...). Even CM 7.2.0 final for HTC legend has it. You can access contents of phone storage (without SD card). Haven't you tried yourself before?
Maybe you are other type of person, but my goal is not to be every day clung infront of PC passing adb commands to comunicate the phone with PC. I thought there is some simplier way to do the same. I will be glad if you can inform me where I can read more about adb commands regarding accessing and passing files across system folders.
And I don't even intend to mess with sys folders, I know for this we have zeubea type people. Simply I wanted to add few ogg files, that's it. And I know I can put same named folders /media/audio/ringtones/ on SD card and it should funcion with some minimal lag but I was curious if it is very simply to that other way. I will not even intend to mess system folders.
Have a good day. =)
I'm not sure what you want - the Legend has limited onboard flash, so you really should use your SDcard as much as you possibly can. Use Link2SD to store non-system apps on an extra partition on your card, so apps won't die when SD card's primary partition is mounted via USB.
To transfer music, connect Legend to your computer using USB, enable USB storage on phone, and copy music files to SDcard's 'music' folder. Works for me using mp3, haven't tried ogg.
---------- Post added at 11:37 AM ---------- Previous post was at 10:48 AM ----------
I'm also considered a noob, so I can't post in the rom dev thread yet, so here we go
I've been running this ROM for about a week, and I've had some issues that I haven't seen reported elsewhere:
Contacts: When searching for a contact, it appears that some filtering is applied, and oftentimes the contact I'm looking for is not found, although it's there when I scroll through contacts. Depending on language settings (english vs danish) the search also seems to be case sensitive, so e.g. entering 'fra', 'Frank' doesn't show up.
Also, contacts are not consistently transferred to my Parrot Bluetooth car kit. Could be bluetooth glitches
WLAN: Using Wifi Analyzer and similar apps, channels are not identified properly, but instead marked as all 0, 1 or ?. I suppose it hangs on a slightly unsuitable WLAN driver, because I haven't seen it in other JellyBean or CM10 ROMs (HTC HD2)
More issues
I just found a few threads mentioning the WLAN channel issue on select HTC handsets since CM6: http://forum.xda-developers.com/showthread.php?t=1022379 and http://forum.xda-developers.com/showthread.php?t=891563. Unfortunately, there's no clear solution in those threads.
Hi,
I first tried the method below:
Is someone trying to develop a Custom ROM for the Huawei Ascend G600 (U8950D)?
http://forum.xda-developers.com/showthread.php?t=1943003
But the phones are not just different band versions, as mentioned in post 58 of the thread above. The T8950 is not kernal compatible with the U8950D:
http://www.jetdroid.org/forum/viewtopic.php?f=106&t=8383
Indeed, the T8950 is equipped with MTK6517 dual-core processor, the MT6517 and MT6577 are the same, A9 architecture 40nm processor, clock ed speed is 1.0Ghz.
http://defendgun.com/2013/01/22/mobile-customized-huawei-glory-t8950-listed-price-at-261/
I don't pretend to have any knowledge about rooting phones, I just was able to find the correct information on the web. I spend two weeks figuring this out. So I hope I can save somebody else his time with this information.
this is how I did it.
UNLOCKING THE BOOTLOADER
--------------------------------------------------
the bootloader of the T8950 is not locked, so it does not need to be unlocked. Allight, step one done!
INSTALLING THE CMW CUSTOM RECOVERY TOOL
------------------------------------------------------------------------------
The T8950 does indeed not have a fastboot mode. the CWM custom recovery can be installed by flashing the ROM using the Flash tool of Mediatek
tutorial: http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.htmlthe correct files to use in the tutorial can be found here:
- SP_Flash_Tool_exe_v3.1224.01 --> http://www.mediafire.com/?c8lr368ceaqk7tv
- MediaTek DA USB VCOM drivers --> http://www.mediafire.com/?h0ytkyagj0kf89u
if all went well, you should have a different recovery screen now.
ROOTING
-----------
Tutorial: http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
The fileto be used is:
- RootT8950.zip --> http://www.mediafire.com/?je47wz2ozjr7oth
After the update is finished, reboot . Now, you should see Superuser in your Huawei T8950 app list. You can double check if you have root, using the "got root?" app.-->https://play.google.com/store/apps/details?id=com.island51.gotroot
INSTALLING THE GOOGLE SERVICES
----------------------------------------------------------
Since the the CWM custom recovery tool is installed now and the phone is rooted, it's very simple to add the google services to the phone. I used the GAPPS of Cyanogen. You can find them on many places, e.g.
http://www.needrom.com/mobile/gapps-cyanogen/
choose the right version, most likely your T8950 will have android ICS 4.0.4
istallation is the same as installing the rooting ROM
REFERENCES
----------------------
http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.html
http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
http://www.aiothudanu.com/2013/01/huawei-t8950-install-cwm-recovery-and.html
http://forum.xda-developers.com/showthread.php?t=1911475
http://www.needrom.com/mobile/gapps-cyanogen/
Regards,
TeTTiweTTi
Hey TeTTiweTTi!
I can not say how glad I am that you wrote this tutorial. It seems that this is actually the only tutorial on how to truly unlock the T8950 (at least for non russian-speakers )
Still, I'd have some questions:
How do you install the VCOM driver? I downloaded it, but I can only find .inf files.. How do you install them?
Did you flash the whole ROM or just a part of it, as shown in the tutorial? And what exactly happens when you flash the ROM? Are you able to boot afterwards? It seems to just install CWM - right?
How do you apply the update RootT8950.zip?
Help would be appreciated a lot, since you seem to be the only one who knows how to properly do it
Oh and btw: did everything work for you after flashing the ROM? Or did you encounter any errors?
Cheers,
amannn
Hi, it was indeed not so easy to collect these bits and pieces together
here an answer to your questions
1.
The .inf files are the drivers. There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
Also, it is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
2.
yes, you only flash a part of the ROM, so you don't need to have all the files in the SP Flash Tool. Only the ones mentioned in the tutorial. Your phone will boot normal, nothing will be changed yet. But now you will have the CWM custom recovery when you start up in recovery mode.
3.
the linked tutorial is quite clear. Let me know if you cannot reach the page or you encounter a problem.
Regards,
TeTTiweTTi
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Hey TeTTiweTTi!
Thank you very much again for your detailed explanation!
So i think I've installed CWM recovery successful. Therefore, I'm now working on the rooting part.
The RootT8950.zip file needs to be applied, using the "choose zip from sdcard" option from CWM recovery right? When I choose that option, I encounter the error "E:Can't mount /sdcard/". Also when I'm trying to create a backup, it says "Can't mount backup path.". So it seems that there is a problem with accessing the sdcard. I then tried the "mount /sdcard" option, but it also says "Error mounting /sdcard".
Did you have any problem like that? When my phone is booted up, there is no problem with accessing the sd card... Or is there a option how I can check if the sd card is inserted correctly? I guess it's internal and therefore impossible to even remove it..
Your help would be highly appreciated!
Many thanks in advance and best wishes,
amannn
EDIT: I was now able to upload the update with an external micro sd. Therefore everything works so far - thanks again
Similar phone mtk6517 svp s580
Hi
I have this. svp. Phone with ARMV7 ( see cpuz snapshot
)
It says mkt6517 with A5 cortex
I tried jnstalling all drivers linked here for ADB
but windows xp disqualified em as valid drivers for this hardware
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
CPU screenshot
CPU screenshot
sieger007 said:
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
Click to expand...
Click to collapse
Hi sieger007,
It can be a little bit tricky to install the drivers, since it are .inf files only. But these are the driver files
http://bm-smartphone-reviews.blogspot.be/2012/05/mt6575-flashing-tutorial.html said:
There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
It is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
Click to expand...
Click to collapse
This second way worked just fine for me.
You can find the drivers and tools also here
http://mt65xx-tools.4shared.com/
he password to login is bm-smartphone-reviews.blogspot.com.
But always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
In order to root you first need to install a custom recovery. In this case it is CWM.
hope this helps
still stuck in driver hell
thanks for your help . I had a previous Chinese MTK (MT6575 ARM A9 cortex ) phone , whose ADB drivers successfully installed when I installed the SDK .
Now this one is MTK6517 ARM A5 Cortex. and none of the methods ( #1 or #2 ) help, in those drivers being recognized.
By method #1 : Right click install - It maybe just copying the driver file to system folder and then on windows would auto detect it when the device is inserted -assuming there is a match .
Method # 2 : Uses the new h/w found dialogue . Not sure if invoking sp_tool is related anyways in invoking that dialogue . It shows up anyways - soon as you plug in the phone .
I could not get the driver files in with the blogspot password to be recognized . Kept giving me "specified location. does not contain info about your h/w msg"
I have the EXACT same problem with ALL drivers hunted on the net , that say MTK driver. Some files say MTK65xx some say MTK_USB_Driver etc.
the h/w ID's and instance IDs associated with the devices are attached .
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
Now the driver.inf file did have one ray of hope with this mention ..wonder if that'd make it compatible with a modified inf file.
But I am lost about HOW to add the h/w ID info ( format and what specific data to add ) to the inf file -most data is of the form VID_eXXX something in that file ( see below quote )
MT6516 USB VCOM drivers\readme.txt
Code:
3. Customers can customize usb2ser_XXX.inf file.
There is a string in the file:
MTK6218 = "USB Modem Driver"
You can modify it for your product name, for example:
MTK6218 = "MY_PRODUCT Modem Driver"
The other perplexing thing is that there are 3 Devices that show up under XP device manager. I managed to get one of em installed as device "android phone" with driver "android ADB interface" from Google and can possibly manage to get ALL of em installed the same way since those device ID's are close ( the last '1' becomes 2 and 3 respectively ) in this
Code:
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
After pushing all these device ID's as "android ADB interface" - and attempting to root- the android rooting s/w's will NOT work at the identification step , erring out with "ADP device not found "- conclusively indicating that those drivers probably did not work well and I ought to look around for better ones - something I am trying to address by this thread.
Lastly - sp_tool when you start it - it will ask for scatter file. The scatter file out there is for MTK6577 (vs my model 6517 ) . If I choose that file - it gives me a warning - yes it out - and click download - it will then just freeze doing nothing
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
sieger007 said:
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
Click to expand...
Click to collapse
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
found something !!! I hope this is perm and not "leased"
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
the chinese rooting program - now hiring English interpreters
the chinese rooting program - now hiring English interpreters
sieger007 said:
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
Click to expand...
Click to collapse
sieger007 said:
the chinese rooting program - now hiring English interpreters
Click to expand...
Click to collapse
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
some screenshots of the text you want translated
here goes ..thank you . Combined several screens together in '4 lets '
TeTTiweTTi said:
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
sieger007 said:
here goes ..thank you . Combined several screens together in '4 lets '
Click to expand...
Click to collapse
ROM Basic Information Huawei T8950 Emotion UI 1.6 official pure version of the card brush pack
Author: Hay.
Size: 398MB
Android Version: 4.1.2
UI type: official factory style
Suitable models: Huawei T8950
Release date: 2013-07-31
MD5 code: F7A21630317EE4239DC145E75FF8A276
ROM presentation
1, based on the official code base package and Qualcomm made to upgrade to 4.1.2
2, emui upgrade to 1.6
3, repair legendary SMS unlit issue
4, full root privileges
5, caused during an upgrade wifi loss problem to fix
6, clean up some pit length useless underlying file
7, adjust the signal and the network connection speed
8 streamlining TTS voice database file
9, usb debugging is enabled by default
10 to adjust the overall Desktop Note: Upgrading from 4.0 to 4.1 need to upgrade Bottom bag bottom package
download address: http://pan.baidu.com/share/link?shareid=805743044&uk=137718883
recover before upgrade to upgrade the official recovery Brush back REC official and third-party tools
brush download address: HTTP :/ / pan.baidu.com / share / link? shareid = 807162397 & uk = 137718883
1.6 EMUI ROM Download: http://t.cn/zQWgp1r
3G not accessible
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE：900/1800/1900MHz
• TD-SCDMA：A frequency（2010-2025MHz）/F frequency（1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
amannn said:
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE：900/1800/1900MHz
• TD-SCDMA：A frequency（2010-2025MHz）/F frequency（1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
Click to expand...
Click to collapse
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
TeTTiweTTi said:
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
Click to expand...
Click to collapse
Mmmmh, ok – that's what i thought too.
Thank you very much anyway for your response TeTTiweTTi!