So I've got an exynos s10 and the Standby drain is pretty high.
I have noticed that Wifi indicator in the status bar looks like wifi is constantly transmitting.
I've checked in BBS and can see that Wifi is running for the same amount of time that WiFi is turned on which to me suggests it definitely is transmitting.
Is this normal behaviour?
I've disabled nearby device scanning and anything else that I can think of that it may be. I've uninstalled a load of apps too. Still happens.
do you have apps that you don't put to sleep that keep updating?
Exynos is unfortunately the main culprit!
Related
Hi,
I would like to know how much battery do the wi-fi, mobile network and gps options use if they're active but not being used: that is, if no application is making use of the gps, the phone is not connected to a wi-fi network and there is no network traffic at all.
Would it be worth bothering to turn those options off under these conditions? Or would it be a waste of time?
GPS 'should' be drawing little to no power if not requested by an app - in theory.
Mine is on all the time and my battery while not lasting as long as I'd quite like, is not being drained like it would if GPS was active.
I take the fact that as the GPS icon is not displayed in the status bar unless turned on by Maps or another app, that its sitting idle.
I 'think' having GPS on means that its available to be used by apps. If off , then its not available at all ever.
WiFi however is on regardless and will be sniffing for networks or attached to a network. Only off or asleep depending the sleep settings you've selected.
i.e off when screen off.
Would wifi use energy if you told it not to notify new spots?
According to BatteryStatus widget, my HTC Hero drops from 95% to 74% in exactly five hours of physical sleep (that's me who slept, not the machine, ok?), I turn the machine into Airplane Mode.
Darn, it forces me to bring the charger to work. (USB charging apparently doesn't do much)
I am not sure if it's the inaccuracy ofthe widget, or do some vampire drained the battery this fast. I have uninstalled NetCounter and Batter Status and Infodroid, disabled Peep update, bogged down Facebook/FLIckr updates to 4 hours, I will see if this machine can achieve longer battery duration tonight.
Hi all,
The Wifi on my SGSII is constantly scanning even though it is connected to my home wifi network (a WPA/WPA2 PSK secured connection on a G band router). The signal strength is "excellent" and I have the phone sitting right next to the router. Further, I have network notification turned off ( unchecked) and under advanced settings, my Wifi sleep Policy is set to "never".
Sprint users have reported exactly the same problem on the Epic Touch 4G" (http://forum.xda-developers.com/showthread.php?t=1272226 ). Has anyone else been experiencing the same issue on their ATT SGS2 ? I would be very grateful if someone could post a solution for this issue.
Thanks in advance
J
PS: My wifi setting screen looks like this genteman's ( except i have network notification turned off)
(http://keithandlaura.smugmug.com/Other/test/i-sMwh6bj/0/L/SC20110921-212528-L.png)
jwlkr said:
Hi all,
The Wifi on my SGSII is constantly scanning even though it is connected to my home wifi network (a WPA/WPA2 PSK secured connection on a G band router). The signal strength is "excellent" and I have the phone sitting right next to the router. Further, I have network notification turned off ( unchecked) and under advanced settings, my Wifi sleep Policy is set to "never".
Sprint users have reported exactly the same problem on the Epic Touch 4G" (http://forum.xda-developers.com/showthread.php?t=1272226 ). Has anyone else been experiencing the same issue on their ATT SGS2 ? I would be very grateful if someone could post a solution for this issue.
Thanks in advance
J
PS: My wifi setting screen looks like this genteman's ( except i have network notification turned off)
(http://keithandlaura.smugmug.com/Other/test/i-sMwh6bj/0/L/SC20110921-212528-L.png)
Click to expand...
Click to collapse
Scan rate is bumped up significantly when you're in the settings menu.
Have you confirmed via logcat that it's scanning frequently outside of the settings menu? It shouldn't be in that case - but without logcat it's almost impossible to tell.
Entropy512 said:
Scan rate is bumped up significantly when you're in the settings menu.
Have you confirmed via logcat that it's scanning frequently outside of the settings menu? It shouldn't be in that case - but without logcat it's almost impossible to tell.
Click to expand...
Click to collapse
Entropy,
What should I be looking for in logcat? I have Betterbattery stats installed and according to that, Wifi scan time is 8+ hours even though Wifi on time is only 2+ hours. That doesn't seem to make sense, but what do I know.
I am running UnNamed 1.3.1.
johny_i said:
Entropy,
What should I be looking for in logcat? I have Betterbattery stats installed and according to that, Wifi scan time is 8+ hours even though Wifi on time is only 2+ hours. That doesn't seem to make sense, but what do I know.
I am running UnNamed 1.3.1.
Click to expand...
Click to collapse
I believe BBS is reporting scan time improperly. I've seen that in a few threads.
Sent from my GT-P7510 using Tapatalk
You're probably right, except now scan time doesn't even show.
I have also observed this on my phone.
I have a Samsung Galaxy IIs, using a Sony Ericsson MW600 BT handsfree as well as a Pioneer car Bluetooth handsfree system.
I have not measured anything yet, but I notice that when the Wi-Fi scanning is going on, I get significant disturbances on both of my Bluetooth hands-free sets. Listening to music is without a hitch, but talking on the phone (Norwegian GSM - operator Telenor) is terrible.
i also noted this after installing the OTA update to 2.3.6 today. I just rooted mine yesterday after reading 54+ pages to make sure i understood everything. i had a cappy and loved installing new roms but have not taken the plunge yet on the sgs ii. I haven't noticed a huge difference in battery yet, but it has only been a couple of hours since the update.
What ROM are you running? You can edit the build.prop to change how often it looks for networks. It is the line "wifi.supplicant_scan_interval=xx". I set mine to 180 which is 3 minutes, some ROM's set it really low. Also the scan rate is bumped up significantly when you're in the settings menu like Entrophy said.
Hi,
I had the same problem where my WIFI was fluctuating.... I dont know if this is the problem/ solution but this is what happened...
My SGS 2 is already rooted and unlocked. I had flashed the Entrophy DD 12/23 first then I had flashed Unnamed Custom ROM. After rebooting the phone, I saw the Wifi was not stable. So I again did a "Wipe Factory Data Reset" and "Wipe Cache Partition" and then installed the Unnamed Custom ROM from the SD Card. My Wifi is pretty stable now.
I am not sure if you guys had this issue when flashing a ROM but this seemed to fix it.
Wifi Scan - Milliwatts
ktoonsez said:
What ROM are you running? You can edit the build.prop to change how often it looks for networks. It is the line "wifi.supplicant_scan_interval=xx". I set mine to 180 which is 3 minutes, some ROM's set it really low. Also the scan rate is bumped up significantly when you're in the settings menu like Entrophy said.
Click to expand...
Click to collapse
I have written about this wifi-battery drain a while back here in XDA.
When I used to have my Nokia symbian cell phone I used to flash custom roms
and there were a lot of nice new features after flashing.
A couple of the really nice battery saving mods were:
#1: added option to change the amount of wifi milliwatt output from 18 milliwatts (default) to 3 milliwatts
which is more than enough if the phone is no more than 20-25 feet from the wireless router.
(the mod gave the option of 3mw,6mw,12mw & 18mw)
Saves a lot of battery life.
Don't know why none of the DEVS have addressed this issue yet.
#2: added a mod so once the wifi establishes a connection it no longer scans
at all unless the connection is disconnected or lost.
So in other words, the phone only scans for wifi until it connects.
Right now I am connected to wifi with my phone and yet in settings it displays "scanning"
non-stop-constantly even though in wifi settings it displays "connected".
Why should the phone be scanning for wifi if it's already connected? (I have no idea).
Don't know why none of the DEVS have addressed this issue yet either.
Both of these mods really made a noticable difference in battery life
for for me since I do use the wifi feature in my phone a lot.
Hopefully one of the DEVS can look into these issues soon.
Now someone mentioned wifi constant scan, I noticed mine is doing the same thing. I leave the wifi setting screen on, it re-scans every 3 seconds!
Misterjunky said:
I have written about this wifi-battery drain a while back here in XDA.
When I used to have my Nokia symbian cell phone I used to flash custom roms
and there were a lot of nice new features after flashing.
A couple of the really nice battery saving mods were:
#1: added option to change the amount of wifi milliwatt output from 18 milliwatts (default) to 3 milliwatts
which is more than enough if the phone is no more than 20-25 feet from the wireless router.
(the mod gave the option of 3mw,6mw,12mw & 18mw)
Saves a lot of battery life.
Don't know why none of the DEVS have addressed this issue yet.
#2: added a mod so once the wifi establishes a connection it no longer scans
at all unless the connection is disconnected or lost.
So in other words, the phone only scans for wifi until it connects.
Right now I am connected to wifi with my phone and yet in settings it displays "scanning"
non-stop-constantly even though in wifi settings it displays "connected".
Why should the phone be scanning for wifi if it's already connected? (I have no idea).
Don't know why none of the DEVS have addressed this issue yet either.
Both of these mods really made a noticable difference in battery life
for for me since I do use the wifi feature in my phone a lot.
Hopefully one of the DEVS can look into these issues soon.
Click to expand...
Click to collapse
Power control - Not likely, unless there is some documented power control already in the driver it's not going to happen. We're in a bad enough state as it is trying to make the chip not fire interrupts at 1 Hz on the Infuse.
Broadcom is one of the least open source friendly chipset manufacturers on the planet - their drivers have NO comments or documentation whatsoever, and datasheets are not available.
The rescan stuff is probably only addressable on Cyanogenmod, messing with it would require source code for the userland wifi management stuff.
mickey4mice said:
Now someone mentioned wifi constant scan, I noticed mine is doing the same thing. I leave the wifi setting screen on, it re-scans every 3 seconds!
Click to expand...
Click to collapse
As stated earlier in this thread - this is by design. It is assumed that if you're in the settings screen you want to change networks and have an up-to-date list.
I also am having this problem. I am running the rooted UKK6 from entropy512. After turning on my wifi, my battery drained from 90% to 70% in 5 hours with no use. My android OS is running at 80-90%. I don't have any extra apps except for 3g watchdog and CPUSpy and BBS. I do have Go launcher and GoSMS installed. As soon as I turn wifi off, i can see my battery level off under settings. I have searched for the last 2 days for a "fix". no luck.
Battery Drain
hatgirl223 said:
I also am having this problem. I am running the rooted UKK6 from entropy512. After turning on my wifi, my battery drained from 90% to 70% in 5 hours with no use. My android OS is running at 80-90%. I don't have any extra apps except for 3g watchdog and CPUSpy and BBS. I do have Go launcher and GoSMS installed. As soon as I turn wifi off, i can see my battery level off under settings. I have searched for the last 2 days for a "fix". no luck.
Click to expand...
Click to collapse
Try doing a clean flash using "wipe data/factory reset" in CWM
recovery and then see if the phone has normal battery drainage.
(which it will if you flash the UnNamed v2.2.1 custom rom)
Then install one app at a time so you can find out exactly which
app is the culprit that causes your excessive battery drain.
This is the best way to trouble shoot battery drainage issues.
You will see that your battery drainage issue is not caused by
the custom rom, but it is caused by a few apps which are just
not very battery friendly.
The UnNamed v2.2.1 rom is the best custom rom currently
available for our i777 phones and it has outstanding battery life.
Good Luck!
hatgirl223 said:
I also am having this problem. I am running the rooted UKK6 from entropy512. After turning on my wifi, my battery drained from 90% to 70% in 5 hours with no use. My android OS is running at 80-90%. I don't have any extra apps except for 3g watchdog and CPUSpy and BBS. I do have Go launcher and GoSMS installed. As soon as I turn wifi off, i can see my battery level off under settings. I have searched for the last 2 days for a "fix". no luck.
Click to expand...
Click to collapse
This has nothing to do with this thread - This thread is talking about wifi scanning.
Drain problems - read my known battery drainers thread. A lot of people are having problems, there is no fix, and there won't be until all the people complaining start actually collecting some data.
Has anyone hit an issue whereby battery drain is high on a particular wifi network.
In my case this is a busy (1000s systems in subnet) corporate wlan running EAP-TLS. Many access points.
At home (using speedmod and siyah kernels) battery life is excellent.
But in the office when this occurs battery drain occurs at a similar rate to web browsing. System is not sleeping as much as usual, and it's not all 200 Mhz running either.
Not yet been able to pin down the behaviour, though it occurs with pretty much all user application processes killed (frozen). Disabling wlan puts usage back to normal, re-enabling wlan hits the issue again. going home (no reboot) and onto my home wlan results in normal battery again with high % sleep.
I'm guessing it relates to traffic on the wlan - maybe lots of broadcasts, maybe re-authentication issues.
So has anyone found issues with battery drain in busy WLANs?
Running rom KJ3
May have to get into tracing/wireshark etc to figure this one out...
Hey guys,
On my second samsung device and my fifth rom (including eclipse TW, eclipse AOSP, aokp, CM10, now hyperdrive). Have to say thay I'm satisfied with pretty much everything Hyperdrive has to offer, its freaking amazing! One issue doesn't seem to be resolving despite many attempts. My phone stays awake nearly 100% of the time with a wlan_wake wakelock. This isnt the well documented wlan_rx_wake wakelock, which I've also had in the past but managed to squash. I'll recount my findings in some order below.
I installed Hyperdrive, restored some some vital apps. Waited a couple days and found the battery wasn't what I'd hoped it'd be. I usually run with auto sync enabled for total 8 mins per hour (via Tasker) and wifi and mobile data on. I've also used a script that disables IPv6 whenever it connects to a wifi network -- work network has tons of IPv6 broadcasts that were triggering massive wlan_rx_wake wakelocks which were vastly reduced with this fix. Even with these throttles, I noticed that some time after boot (10-15 minutes) on my work as well as home network (10 mixed devices on a belkin router), a wlan_wake wakelock would start triggering and my phone would then stay awake 90-100% of the time, screen on or off.
I went ahead factory reset the phone, loaded just my google account, and found the same problem with autosync on, autosync off, GPS was off, Wifi "always allow scanning" option was disabled in the advanced menu, Google's Wifi network location was disabled, and no 3rd party apps except for BBS installed. Of course, with Wifi disabled, the issue abated but 3g/4g doesn't offer much better battery life than the phone staying awake the whole time. During this time, I used Network Logger and Shark for Root to attempt to identify Wifi traffic and found that a few apps were transmitting frequently, but not enough to keep the phone awake for the amount of time the wakelock indicated. Total battery drain is up to 8-10%/hour with absolutely minimal use. I've never had this particular issue with any other OS i've installed, any ideas what could be going on? Really looking forward to being able to rip through days without charging on Hyperdrive!
I have a Samsung Note 3 and I too have this same problem (except that a factory reset solves it). Can't seem to find a fix. People on internet suggest that it's because of some rogue app but my phone starts behaving like this randomly until I do a factory reset.
Hello,
I have the following Problem, while in Idle the phone is consuming so much battery, any help ?
push
Which ROM release are you on?
I am on Stock Rom and have the latest ota 15.07
dafuq2111 said:
Hello,
I have the following Problem, while in Idle the phone is consuming so much battery, any help ?
Click to expand...
Click to collapse
There are quite a few threads on this already including what I wrote (pasted below).
<<<<
I had two types of standby battery drain - mobile data and wifi. I have fixed both of them through lots of trial and error. From my testing and looking on XDA at similar experiences of people on other phones, these are bugs in Android rather than anything Elephone can fix through updates (I'm on the latest 20160419 update).
I fixed the mobile data problem by creating Tasker profiles to keep the phone on 2G whilst it's connected to wifi. I can't post links yet but a search on XDA/Google will find you these profiles. Maintaining a 4G connection is unnecessary whilst on wifi, besides, some people have problems receiving calls on this phone whilst on 4G. If the phone is not connected to wifi (rare in London because it's everywhere even on public transport) 4G comes on. Best of both worlds.
The wifi drain solution sounds counterintuitive but it is simply to set it to 'always on'. With both of these measures, my standby drain has been 1% overnight for the last two nights and roughly 0.25%/hour during the day. Standby drain on 4G whilst moving around London with location on at least quadruples battery drain to around 1-2%/hour.
Some of my other settings will have an impact too. I find the auto-brightness calibration of the P9000 poor, so adjust brightness manually (which also saves battery life). NFC, bluetooth, etc. I only turn on when needed. I use Greenify and have all apps Greenified except Tasker, Textra, and Hangouts. I haven't Greenified any system apps except Google Maps. Location is always on but mostly device only (again counterintuitive, you'd expect it to be 'battery saving') unless I am moving around in which case I have a Tasker profile to automatically switch it to 'high accuracy'.
I tried to get Xposed working so that I could use Amplify too (see my other post) but that didn't work. Since I'm very happy with battery life now that's not that important anymore though it would be nice for the further tweaks it makes possible.
There are too many other variables to list and everybody's phone is set up differently. However, hopefully using some of the main big gains I've listed above you can fix your wifi drain specifically and improve standby drain generally.
Well, it's somewhat problably what keeps the phone awake, this occurs after factory reset, i already did the Tricks you've listed and on screen Features and so on are all off, there are no Apps who should keep the phone awake Cause it's happening Straight after factory reset so there are no other Apps..
Push
Finger print sensor or DT2W for sure. Disable them
On the latest ROMs it is the finger print sensor. Turn it off or go back to 20160810