so I flashed the parinoid android 4.2.2 on my att one x+ was fine until i used goo manager to download gapps and flash them on my phone everything crashed so i flashed a new rom viperxl and now my phone is stuck in recovery sdcard got wiped lost all my bachups and have no android and ideas or help please....
I figure your phone is an AT&T version? You didn't gave much details about your phone and config so I will guess it is At&T
Try this to solve your issue.
Start by installing your SDK tool correctly, guide HERE
Download this recovery HERE
Move this file in your platform-tools folder
Press and hold the Shift key and right click on a empty space of that folder and select Open Command Window Here
In the command window with your phone in FASTBOOT USB mode
Type>fastboot flash recovery openrecovery-twrp-2.4.4.0-evitareul.img
(Success)
Type again>fastboot erase cache
(Success)
Unplug your USB cable
Hit one time Power
Select Recovery (Volume down)
Hit Power to Reboot in Recovery
Your phone should reboot in Recovery
(!! The following instruction are with TWRP Recovery installed !!)
Select Advanced -> ADB Sideload -> swipe to activate
Download this file ViperXL+ 1.2.7 JB and transfer this file again in platform-tools folder and rename it : ViperXL
Press and hold the Shift key and right click on a empty space of that folder and select Open Command Window Here
Double click on the ViperXL.zip file and locate the boot.img and drag it to the platform-tools folder.
Type>adb sideload ViperXL.zip (Enter)
(Success)
Once done select Wipe menu and wipe (factory reset and format system)
Select Install menu of the Recovery
Locate sideload.zip and select it.
Swipe to confirm.
Aroma installer will start leave everything by default and install the ROM.
Once done select Reboot-> Bootloader
Make sure FASTBOOT USB is highlighted
In bootloader via the command window type>fastboot flash boot boot.img (Enter)
(Success)
At the prompt type>fastboot erase cache (Enter)
(Success)
Finally at the prompt>fastboot reboot (Enter)
Rebooting
Give your phone ~5-10 minutes to complete the installation.
Tell me how that went please.
Lucky Thirteen said:
I figure your phone is an AT&T version? You didn't gave much details about your phone and config so I will guess it is At&T
Try this to solve your issue.
[/LIST]
Tell me how that went please.
Click to expand...
Click to collapse
Thanks did all the steps everything said it went through but when i rebooted it wouldn't get past the htc screen and ideas..
Yes, probably the boot.img.
Reboot in bootloader and re-do those steps :
Download this file and place it in the platform-tools folder
In bootloader via the command window type>fastboot flash boot boot.img (Enter)
(Success)
At the prompt type>fastboot erase cache (Enter)
(Success)
Finally at the prompt>fastboot reboot (Enter)
Lucky Thirteen said:
Yes, probably the boot.img.
Reboot in bootloader and re-do those steps :
Click to expand...
Click to collapse
still no luck stuck at htc screen any other ideas
Which version the hboot in your phone?
Reboot in bootlaoder mode and type this command >fastboot getvar all and Copy/Paste the results here. Remove these lines they are irrelevant :
serialno: HT34xxxxxxxx
imei: xxxxxxxxxxxx
meid: xxxxxxxxxxxxx
Lucky Thirteen said:
Which version the hboot in your phone?
Reboot in bootlaoder mode and type this command >fastboot getvar all and Copy/Paste the results here. Remove these lines they are irrelevant :
serialno: HT2bmw303344
imei: 353429050544125
meid: pm6310000
hboot-t30s
Click to expand...
Click to collapse
Please erase your previous post.
This is what I need :
C:\AndroidSDK\platform-tools>c:\windows\system32\cmd.exe
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.
C:\AndroidSDK\platform-tools>adb reboot bootloader
C:\AndroidSDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.044s
C:\AndroidSDK\platform-tools>fastboot reboot
Lucky Thirteen said:
Please erase your previous post.
This is what I need :
C:\AndroidSDK\platform-tools>c:\windows\system32\cmd.exe
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.
C:\AndroidSDK\platform-tools>adb reboot bootloader
C:\AndroidSDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.044s
C:\AndroidSDK\platform-tools>fastboot reboot
Click to expand...
Click to collapse
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.32.0000
(bootloader) version-baseband: SSD:1.09.55.17
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.15.502
(bootloader) product: evitare_ul
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM6310000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3758mV
(bootloader) devpower: 18
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.464s
Ok reboot your phone in recovery
Select Wipe menu -> Advanced Wipe ->tick All option (except USB-OTG if available) -> Swipe
Once Done Select Install menu -> Locate Sideload.zip and Swipe to install.
Set the options in Aroma
Reboot your phone
Let settle the ROM for ~10 minutes.
Results ?
Lucky Thirteen said:
Ok reboot your phone in recovery
Select Wipe menu -> Advanced Wipe ->tick All option (except USB-OTG if available) -> Swipe
Once Done Select Install menu -> Locate Sideload.zip and Swipe to install.
Set the options in Aroma
Reboot your phone
Let settle the ROM for ~10 minutes.
Results ?
Click to expand...
Click to collapse
i have no advanced wipe i have cache, dalvik cache, factory reset, system, internal storage, format data
Ok select Factory reset and system only.
Lucky Thirteen said:
Ok select Factory reset and system only.
Click to expand...
Click to collapse
still stuck at htc screen
Hum....
Well.... lets try this again, I don't know if this will work, but...
Boot your phone in bootloader mode and plugged in your USB cable. make sure FASTBOOT USB is highlighted.
Hold shift and right click in an empty space of the platform-tools folder, and select Open a command window here.
In the command window type>fastboot flash boot ViperXL.img (Enter)
(Success)
At the prompt type>fastboot erase cache (Enter)
(Success)
Finally at the prompt>fastboot reboot (Enter)
Lucky Thirteen said:
Hum....
Well.... lets try this again, I don't know if this will work, but...
Boot your phone in bootloader mode and plugged in your USB cable. make sure FASTBOOT USB is highlighted.
Hold shift and right click in an empty space of the platform-tools folder, and select Open a command window here.
In the command window type>fastboot flash boot ViperXL.img (Enter)
(Success)
At the prompt type>fastboot erase cache (Enter)
(Success)
Finally at the prompt>fastboot reboot (Enter)
Click to expand...
Click to collapse
still didnt work so i let the phone charge to 100% and am trying again from beging i wiped the rom so starting fresh i will let you know and tganks for the help.
joshua.williams.sr said:
still didnt work so i let the phone charge to 100% and am trying again from beging i wiped the rom so starting fresh i will let you know and tganks for the help.
Click to expand...
Click to collapse
well did a wipe resideloaded the rom, wiped cache, flashed boot.img, still nothing but htc screen
Lucky Thirteen said:
Hum....
Well.... lets try this again, I don't know if this will work, but...
Boot your phone in bootloader mode and plugged in your USB cable. make sure FASTBOOT USB is highlighted.
Hold shift and right click in an empty space of the platform-tools folder, and select Open a command window here.
In the command window type>fastboot flash boot ViperXL.img (Enter)
(Success)
At the prompt type>fastboot erase cache (Enter)
(Success)
Finally at the prompt>fastboot reboot (Enter)
Click to expand...
Click to collapse
well i have been looking my situation up and i think i need to reinstall the factory ruu by chance do you know how to do this
Yes, it is relatively easy to do so,
Reboot in bootlader mode in your command window type> fastboot oem lock
Again type at the prompt >fastboot reboot-bootloader
Make sure FASTBOOT USB is highlighted and continue the procedure
Directly via Windows simply execute this RUU on your computer.
Lucky Thirteen said:
Yes, it is relatively easy to do so,
Reboot in bootlader mode in your command window type> fastboot oem lock
Stay in FASTBOOT USB and continue
Then simply execute this RUU on your computer.
Click to expand...
Click to collapse
thanks i am going to try that later ill let you know hoq it turns out... thanks for all the help
Here is a variant to try...
Put this AT&T stock ROM in the platform-tools folder
Boot your phone in bootloader mode, have FASTBOOT USB enabled by connecting to the PC
Open up a command window in the platform-tools folder (Hold Shift + right click empty space)
At the prompt >fastboot devices (Your phone serial number must appear!)
At the prompt >fastboot oem rebootRUU (Case sensitive)
At the prompt >fastboot flash zip evitareul_stock_ATT.zip
At the prompt >fastboot reboot
Wait until system loads up can be as long as ~60 minutes
Hi,
I have a Motorola XT925 that appears to be unrecoverable and I was wondering if anyone here has been able to solve. I have looked through this group and there seems to be similar issues but non resolved for my particular issue.
When the phone attempts to boot I get the "Encryption unsuccessful" message with a "Reset phone" button that does nothing. According to other posts I have read on this error, if I could unlock the bootloader (and wipe the device) all would be well, however, when I get the phone into fastboot mode and attempt the unlock (as detailed on the Motorola website), it states the phone does not qualify for bootloader unlocking.
I see there is an exploit that can unlock the bootloader if the phone has root installed, however this phone does not and will not boot...
Is there anything that can be done?
Do you have the unlock key?
If its an xt925 ,it should qualify for unlock.
Make sure you update your drivers, try using another port (2.0 preferably), and that you copy the string correctly.
Tapatalk with RAZR HD
neo.ank said:
Do you have the unlock key?
If its an xt925 ,it should qualify for unlock.
Make sure you update your drivers, try using another port (2.0 preferably), and that you copy the string correctly.
Tapatalk with RAZR HD
Click to expand...
Click to collapse
Thanks for replying, you are indeed correct. I must have cut and paste the unlock key incorrectly. However, I still do not think thing the phone is functioning correctly as I am not able to do anything with the fastboot command. I can not erase/format partitions (userdata or cache), I can not flash either the recovery (to CWM) or boot partitions and can't even boot the phone directly to the recovery image.
Here are some outputs from the fastboot:
C:\Users\EIT-Z820\Downloads>fastboot getvar all
(bootloader) version-bootloader: 109B(*)
(bootloader) product: vanquish_u
(bootloader) secure: yes
(bootloader) mid: 0056
(bootloader) version: 0.5
(bootloader) serialno: TA24000RHS
(bootloader) qe: qe 0/0
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 16GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x8300
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 1789E20102000100000000000000
(bootloader) cid: 0x0e
all:
C:\Users\EIT-Z820\Downloads>fastboot erase cache
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.049s
C:\Users\EIT-Z820\Downloads>fastboot flash recovery recovery.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (7892 KB)...
OKAY [ 0.612s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
Not sure what the Variable not supported message is, however even when I unlocked the device, there was a message saying that it was unable to erase partition.
Any ideas?
Drivers, could be the reason. Try re-installing.
Also, use 'mfastboot' and see if the issue persist.
Tapatalk with RAZR HD
Hi,
I have XT1635-03, when i try to unlock bootloader got following message
fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found ...
(bootloader) Unlock data:
(bootloader) cid_get_cid_data: Version 0 datablock
(bootloader) Failed OKAY [ 0.012s] finished. total time: 0.014s
How to fix it? want to install custom rom, its chinese set without playstore, tried couple of methods to install
playstore put also they fail. any help plz?
thx
XT 1635-03 is a moto z play. Better ask in the moto z play forum.
kami2k said:
Hi,
I have XT1635-03, when i try to unlock bootloader got following message
fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found ...
(bootloader) Unlock data:
(bootloader) cid_get_cid_data: Version 0 datablock
(bootloader) Failed OKAY [ 0.012s] finished. total time: 0.014s
How to fix it? want to install custom rom, its chinese set without playstore, tried couple of methods to install
playstore put also they fail. any help plz?
thx
Click to expand...
Click to collapse
Man, if your 1635-03 are from Gearbest or Banggod - it`s already with unlocked BL.
Just run
"fastboot oem get_unlock_data "
twice ))
OnePlus 6
current OS unknown (probably 5.1.5)
stock recovery
Hi all,
since I obviously hard-bricked my OP6 recently, the only thing that the phone does is booting directly into the bootloader.
Current status:
Code:
PS C:\Android> fastboot oem device-info
...
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) enable_dm_verity: true
(bootloader) have_console: false
(bootloader) selinux_type: SELINUX_TYPE_INVALID
(bootloader) boot_mode: NORMAL_MODE
(bootloader) kmemleak_detect: false
(bootloader) force_training: 0
(bootloader) mount_tempfs: 0
I'm not allowed to execute ANY commands, which are always denied by "FAILED: (remote xyz is not allowed)"
oem unlocking does not work.
Trying to boot from a boot.img via fastboot (fastboot boot yxz.img) sends the phone into a freezing boot logo screen
I'm out of ideas and beginning to get really desperate about this.
Any help?
EDIT: The MsmDownloadToolV4.0InternationalVersionOxygenOS5.1.5 fixed it, finally. After more than 5 failed attempts. (which made me lose hope).
I'm STILL curious about that remote error. What causes it and is there another way to fix it?
good evening
Help solve the problem.
Watch A1612, there was a customized firmware with a Russian.
I tried to roll it 2,8,0,5 did not work, the clock just does not start, an eternal reboot.
I tried to roll back to 1.3.0n by the instructions
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
The firmware was installed, when trying to update on OTA to 1.3.8a immediately after the reboot I receive an inscription on the screen "ERROR" and an exclamation mark.
Help me please.
Thank you
C:\adb\huangheUS-1.3.0n>fastboot getvar all
(bootloader) version-bootloader: U-Boot 2013.07-00096-gf3b140c
(bootloader) version-baseband: N/A
(bootloader) version-hardware: V1.1 20130322
(bootloader) version-cdma: N/A
(bootloader) variant: watch
(bootloader) serialno: 0123456789abcdef
(bootloader) product: watch
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) uart-on: NO
(bootloader) partition-size:bootloader: 0x0000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x1000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x2000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system: 0x3000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:cache: 0x4000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata: 0x5000
(bootloader) partition-type:userdata: ext4
(bootloader) max-download-size: 0x4000000
all:
Finished. Total time: 0.280s
Flash latest INTL stock, then before you start it:
Code:
adb wait-for-device
adb shell reboot bootloader
fastboot erase data
fastboot erase cache
fastboot erase userdata
fastboot reboot
lfom said:
Flash latest INTL stock, then before you start it:
Code:
adb wait-for-device
adb shell reboot bootloader
fastboot erase data
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
Did you mean - flash latest international ROM 2.8.0.5 and after implement your code?
Could you please describe in more details?
Thanks
ExtrimVF said:
Did you mean - flash latest international ROM 2.8.0.5 and after implement your code?
Could you please describe in more details?
Thanks
Click to expand...
Click to collapse
Exactly what you said (and that's what I said previously).
lfom said:
Exactly what you said (and that's what I said previously).
Click to expand...
Click to collapse
I've done exactly what you said.
Installed latest ROM by this link
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
and run script what you gave me.
Now i have always booting watch
Please help
ExtrimVF said:
I've done exactly what you said.
Installed latest ROM by this link
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
and run script what you gave me.
Now i have always booting watch
Please help
Click to expand...
Click to collapse
Try this if you are on Windows:
Code:
adb wait-for-device & adb reboot wipe
or this on Linux/macOS:
Code:
adb wait-for-device; adb reboot wipe
If you still cannot boot, I suggest and you use the code I gave you before to fully erase data on watch, then use the unbrick tutorial but flash an old firmware like 1.3.0 first, then try to boot watch.
Could you please help me to find right instruction and rom package?