Related
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
leinad1313 said:
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
Click to expand...
Click to collapse
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Try this: http://forum.xda-developers.com/showpost.php?p=36688645&postcount=808
PS.: If you can't get your phone in emergency mode (step 5) you can put in download mode instead. To get it in download mode press and hold volume down and up while you connect your usb cable to your pc
the phone does not go into any recovery mode (emergency) indeed, the PC recognizes it as USB\VID_05C6&PID_9008&REV_0000
Yet another brick. There should be a counter for this.
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
same problem
mejinn said:
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
Click to expand...
Click to collapse
I have the same problem... any idea?
thanks
mejinn said:
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Click to expand...
Click to collapse
same problem ... on l7 ( does anyone unbrick his phone?
Flash the stock firmware
Sent from my LG-P880 using xda premium
No solution to this problem
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
---------- Post added at 04:02 PM ---------- Previous post was at 03:46 PM ----------
breakercris said:
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
Click to expand...
Click to collapse
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice:crying::crying::crying::crying::crying:
Sony st23i
Same chases with me, on my phone sony st23i, please help me, can anybody give me link for this chases???
I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
albertwesquer said:
I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
Click to expand...
Click to collapse
i had just tried this method and now my l9 is dead, please help
pustulio666 said:
i had just tried this method and now my l9 is dead, please help
Click to expand...
Click to collapse
Damm dude,i try this method but i did not went that bad! i mean i just wasnt able to unlock boatloader but it seem that is not working!! HOPE someone can HELP US ASOP!!
albertwesquer said:
I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
Click to expand...
Click to collapse
Try reflashing the rom again and use it for some time without trying to unlock the bootloader. First be sure the rom is flashed perfectly and working fine. If everything works ok, you can go ahead with other experiments (of course at your own risk.) By the way, someone was saying Telcel might have not added the bootloader unlock feature in this rom. Just a possibility.
EDIT: The symptom you have mentioned "phone keeps connecting and disconnecting" known behavior (see post 7th point), while installing fastbook mode drivers. Seem your phone has come in fastboot mode (but still locked) and no fastboot drivers yet installed. Installing it is really very tricky. Follow that post carefully.
pustulio666 said:
i had just tried this method and now my l9 is dead, please help
Click to expand...
Click to collapse
Which rom you had before? Was it rooted and cwm on? Can you start phone in CWM mode (VolumeUp+Home+Power keys)? If yes, you can flash your cwm backup and be back on your previous rom.
I hope both of you people took nandroid backup (on external sdcard) before flashing.
cmahendra said:
Try reflashing the rom again and use it for some time without trying to unlock the bootloader. First be sure the rom is flashed perfectly and working fine. If everything works ok, you can go ahead with other experiments (of course at your own risk.) By the way, someone was saying Telcel might have not added the bootloader unlock feature in this rom. Just a possibility.
EDIT: The symptom you have mentioned "phone keeps connecting and disconnecting" known behavior (see post 7th point), while installing fastbook mode drivers. Seem your phone has come in fastboot mode (but still locked) and no fastboot drivers yet installed. Installing it is really very tricky. Follow that post carefully.
Which rom you had before? Was it rooted and cwm on? Can you start phone in CWM mode (VolumeUp+Home+Power keys)? If yes, you can flash your cwm backup and be back on your previous rom.
I hope both of you people took nandroid backup (on external sdcard) before flashing.
Click to expand...
Click to collapse
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
albertwesquer said:
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
Click to expand...
Click to collapse
But can you bring phone in SW upgrade Mode?
I think part of the problem was following the omap4boot. It flashes files to the phone which are not for our phone. I have done the same thing.
When I use the "Phone Tester" app from Play Store, under system info, it says the device is a "U2". This is wrong.
Screenshot here
I dont have any access to fastboot mode anymore as far as i can tell. I cant install clockworkmod on my phone now. Im trying to understand what changed by following the omap4boot guide.
albertwesquer said:
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
Click to expand...
Click to collapse
Yes it enters in SW upgrade Mode, but wen is about to be FLASHED it says than phone is disconnected, so i retry but is no use! this happen wen i installed the omap4boot drivers!!
albertwesquer said:
Yes it enters in SW upgrade Mode, but wen is about to be FLASHED it says than phone is disconnected, so i retry but is no use! this happen wen i installed the omap4boot drivers!!
Click to expand...
Click to collapse
Have patience and do not panic. This phone is really unbrickable, if not physically damaged.
I am not sure what is the status of your phone right now. But keep the fastboot thing aside and give priority to restore phone and make it properly working.
Remove all LG programs from pc, remove all LG drivers from pc and Restart PC. Now install latest LG PC Suite, and put phone in SW Upgrade mode and connect to pc and let all LG drivers install itself.
Do not let windows install any WDM drivers by clicking on this link while drivers are loaded. Do this always for any phone any device you connect to pc. Correct drivers already installed with PC Suite will load quickly.
Now run PC Suite and select Emergency Firmware Recovery option. Now LG PC suite should download fresh ROM and recover your phone.
================
If this fails, keeping phone in SW Upgrade mode, you can still try same with B2CAppClient as shown in 5A part of this thread. Click on "Start Updating"
================
Above both are online method and will need faster internet so rom is downloaded.
In the fastboot thread it clearly says to say no to the prompt that asks you if you want to flash u-boot. If you replaced your u-boot you need to get an original copy of the u-boot for your phone. I think Lelus has a post somewhere, but I don't know if its for your phone specifically. Search for Lelus x&u.
P.S. I've done same thing before and you should definitely be able to enter fastboot and get it sorted out again.
---------- Post added at 05:45 PM ---------- Previous post was at 05:38 PM ----------
I can't seem to find the u-boot x-loader fix Lelus uploaded for someone. You have to look or maybe PM him.
cmahendra said:
Have patience and do not panic. This phone is really unbrickable, if not physically damaged.
I am not sure what is the status of your phone right now. But keep the fastboot thing aside and give priority to restore phone and make it properly working.
Remove all LG programs from pc, remove all LG drivers from pc and Restart PC. Now install latest LG PC Suite, and put phone in SW Upgrade mode and connect to pc and let all LG drivers install itself.
Do not let windows install any WDM drivers by clicking on this link while drivers are loaded. Do this always for any phone any device you connect to pc. Correct drivers already installed with PC Suite will load quickly.
Now run PC Suite and select Emergency Firmware Recovery option. Now LG PC suite should download fresh ROM and recover your phone.
================
If this fails, keeping phone in SW Upgrade mode, you can still try same with B2CAppClient as shown in 5A part of this thread. Click on "Start Updating"
================
Above both are online method and will need faster internet so rom is downloaded.
Click to expand...
Click to collapse
SUCCESS MY FRIEND!! With YOUR TERRIFIC HELP i brought back my L9!! So what do you recommend i do next? Should i try to unlock the boatloader? Do you have any suggestions? cuz i REALLY WANNA ROOT MY PHONE!! Or is there a way to return to ICS? TANK YOU SO MUCH 4 UR HELP! by the way THANK YOU SO VERY MUCH for the instructions with the screenshots that you kindly put for me it really help!
congrats
albertwesquer said:
SUCCESS MY FRIEND!! With YOUR TERRIFIC HELP i brought back my L9!! So what do you recommend i do next? Should i try to unlock the boatloader? Do you have any suggestions? cuz i REALLY WANNA ROOT MY PHONE!! Or is there a way to return to ICS? TANK YOU SO MUCH 4 UR HELP! by the way THANK YOU SO VERY MUCH for the instructions with the screenshots that you kindly put for me it really help!
Click to expand...
Click to collapse
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
cmahendra said:
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
Click to expand...
Click to collapse
my l9 its alive!,
but i have some weird things, it doesn't has boot and splash screen and a strange screen like a broken screen until lock and unlock.
I used fastboot method to conect to lg software update and now i have my stock P768 ICS
pustulio666 said:
my l9 its alive!,
but i have some weird things, it doesn't has boot and splash screen and a strange screen like a broken screen until lock and unlock.
I used fastboot method to conect to lg software update and now i have my stock P768 ICS
Click to expand...
Click to collapse
your phone has wrong xloader or uboot or both
which one is the right kdz(link) for your phone ?
Lelus said:
your phone has wrong xloader or uboot or both
which one is the right kdz(link) for your phone ?
Click to expand...
Click to collapse
Here is the link to the threat, in there you will find P768 V20A Telcel Mexico JB for P768, Thanks and hope u can help us to unlock our wierd boatloader!
cmahendra said:
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
Click to expand...
Click to collapse
By method KDZ offline flash, and leave phone on and usb debug on and Lg software connection
CRAP that look very complicated :crying:, isn't there a easiest method? Thanks 4 ur help!
albertwesquer said:
Here is the link to the threat, in there you will find P768 V20A Telcel Mexico JB for P768, Thanks and hope u can help us to unlock our wierd boatloader!
Click to expand...
Click to collapse
From a quick glance at the kdz it looks like v20a for p768 doesn't have the code to unlock bootloader.
Lelus said:
From a quick glance at the kdz it looks like v20a for p768 doesn't have the code to unlock bootloader.
Click to expand...
Click to collapse
So this means that unlocking the bootloader is not possible? And we could NEVER do it? Is there any chance to at least root in a easy way? THANK YOU FOR YOUR HELP AND TIME!
albertwesquer said:
So this means that unlocking the bootloader is not possible? And we could NEVER do it? Is there any chance to at least root in a easy way? THANK YOU FOR YOUR HELP AND TIME!
Click to expand...
Click to collapse
you should be ok as long as other carriers with p768 allow bl unlocking, there might be other workarounds but nothing easy to do
Lelus said:
you should be ok as long as other carriers with p768 allow bl unlocking, there might be other workarounds but nothing easy to do
Click to expand...
Click to collapse
CRAP!!, i had a bad feeling you'll say that, well i have to dig around and wait til someone other than a noob like me, gives it a shot and nails it, so it can give me a noob-proof tutorial, THANKS mate, keep up the GREAT WORK YOU DO for XDA!
I tried to root device but now the phone it's not booting... Any help will be appreciated. I think it's soft bricked....it's charging and i can enter Download mode.....but nothing else.....in recovery mode it's dead (black screen).
gordonisrock said:
I tried to root device but now the phone it's not booting... Any help will be appreciated. I think it's soft bricked....it's charging and i can enter Download mode.....but nothing else.....in recovery mode it's dead (black screen).
Click to expand...
Click to collapse
I'd say get the original firmware directly from the Samsung website for this device and you should be able to flash it somehow via download mode. I could be wrong I've never been without recovery. Sorry I can't be of more help.
emmanuel_baez said:
I'd say get the original firmware directly from the Samsung website for this device and you should be able to flash it somehow via download mode. I could be wrong I've never been without recovery. Sorry I can't be of more help.
Click to expand...
Click to collapse
Thanks.I'm looking for the firmware but i can't find it. I Think i will go to a Samsung store to ask.
gordonisrock said:
Thanks.I'm looking for the firmware but i can't find it. I Think i will go to a Samsung store to ask.
Click to expand...
Click to collapse
Not a problem. Best of luck to you
Hello great people of XDA. Ok I have a major problem. I'm not sure what classification my phone state is in, but this is the issue. I turn it on it loads up and displays the Sony, xperia and the existenz logos. But after all this it freezes up at the purple wave. Tried booting into recovery no go. So now I've tried to flash it, here is another issue. When I try to get it into flash mode first the notification light turns green for a split second and then turns off completely. But I still try anyways, now flash tool will say device connected through flash mode yet it will not read the data of the device at all, so I'm like ok no problem I'll see if I can bypass this by inputting the actual phone in the flash menu. So I do that select the stock file and try to flash, it gets stuck on reading device. I am wanting to maybe use the flashboot mode but I don't know how to use that mode. Sooooooooo what do I do because I've beaten myself trying to figure this all out, so can someone point me in the right way. Also if I need to clarify more of this issue please let me know. Also I am using Windows 10 already ran into issues figuring out how to use drivers, but I fixed that.
Have you made sure its charged?
I maybe wrong but I am pretty sure you have to put it into fastboot mode first (blue light) then flashmode to use Flashtool.
tried sony pc companion?
nimicitor said:
Have you made sure its charged?
I maybe wrong but I am pretty sure you have to put it into fastboot mode first (blue light) then flashmode to use Flashtool.
Click to expand...
Click to collapse
It's fully charged. So I know it can't be that.
Lasantha said:
tried sony pc companion?
Click to expand...
Click to collapse
No I actually haven't. Can you explain how I should go about that?
http://support.sonymobile.com/global-en/tools/pc-companion/ downlod from here use repair mode folow instructions in it ..all the best
Lasantha said:
http://support.sonymobile.com/global-en/tools/pc-companion/ downlod from here use repair mode folow instructions in it ..all the best
Click to expand...
Click to collapse
Ok I'm like going crazy here, I've tried and tried and yes tried some more. There is no way at all I am going to get this phone in flashmode it is am absolutely no go. So can I be pointed somewhere that I can just use flashboot because I can get into that mode no problems, I just don't know where the correct files are. Thank you for your time.
Wraith512 said:
Ok I'm like going crazy here, I've tried and tried and yes tried some more. There is no way at all I am going to get this phone in flashmode it is am absolutely no go. So can I be pointed somewhere that I can just use flashboot because I can get into that mode no problems, I just don't know where the correct files are. Thank you for your time.
Click to expand...
Click to collapse
The answer is very simple.SCREW WINDOWS 10.
Just use another pc with windows 7,manually install xperia z2 drivers and do the drill with the flashtool.
Thank me when your done.
Turn off Windows 10 driver signature enforcement and then install the drivers again.
http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/
nimicitor said:
Turn off Windows 10 driver signature enforcement and then install the drivers again.
http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/
Click to expand...
Click to collapse
That's not the problem, I'll admit that was an issue at the beginning but I was able to install drivers. So it's not a driver issue.
Does anyone have any ideas on what I can do? Please
Just use the sony companion, it will work, had the same issue. If for some reason it fails, use windows 7 instead.
Check out this video
https://m.youtube.com/watch?v=PiaFGbeGOr0