Related
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
pakudaboy said:
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Click to expand...
Click to collapse
Yes ^he^ is correct . Download a rom from the mi website . And then flash the rom using MiFlash tool . then you should be able install roms .
s-u-f-f-e-r said:
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
Click to expand...
Click to collapse
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
pakudaboy said:
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
Click to expand...
Click to collapse
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
s-u-f-f-e-r said:
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
pakudaboy said:
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
Click to expand...
Click to collapse
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
gunmoule said:
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
Click to expand...
Click to collapse
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
pakudaboy said:
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
Click to expand...
Click to collapse
Unlocking was successful only on dev rom in my case
pakudaboy said:
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
Click to expand...
Click to collapse
Read up this thread: http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708 , this: http://en.miui.com/thread-240531-1-1.html and this: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using Tapatalk
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
ok
i'm flashing dev ROM now.
going to try if i can unlock BL.
so there no way to install TWRP without unlock BL first?
my situation is bit messed up, because I had Redmi Note 2 linke to same mobile number.
so when I tried to unlock it it keeps saying "Couldn't verify device, Current accoutn is different from the account info on the device" but i'm 100% sure i'm using same account tho.
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
unlocked fine with Dev ROM!
sweet
now time to find out how to flash TWRP!
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
s-u-f-f-e-r said:
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
Click to expand...
Click to collapse
done.
TWRP flashed, but somehow lost wifi function in Dev Rom
going to try flash Resurrection over see if that fix it.
seems everything's working now with RR rom!
thanks so much for everyone's help especially s-u-f-f-e-r!
I am very confused on how to root RN3 (SD 650).
I need rooting for
- Titanium backup
- Adblock
There are multiple terms and multiple posts. Can any one guide.
What is Kenzo, Kate .... ?
What is global dev/chinese rom?
What I have learnt so far
Step 1 - I need to unlock bootloader. But how ??
Official method - Does it require flashing a new rom? Will I loose data?
Unofficial - Is there any safe method?
Step 2 - Flash recovery
Cofface and ZCX are stable TWRPs. Which one to use.
i unlocked on global stable (so no data loss) no need of dev ROM ( it depends on luck)
try logging in on miunlock tool and micloud with mobile no (as username)only. If it fails try tommorow. repetition can do no good.
I unlocked on stable rom on my first attempt of the day.
my last attempt was weeks ago (primarily because i thought it was a lost cause)
thread http://en.miui.com/thread-280561-1-1.html
zcx for backing up ROMs ,
while updating through zcx to 6.11.24 many had bootloop(easily fixed by miunlock again).
so i updated through cofface no big problem ( the only problem i had was the system launcher was not loading fixed when i installed xposed again) always take backup before updating
first thing first. apply for bootloader unlocking. thn unlock it through mi unlock tool. if u are new to these things thn dont try unofficial methods.
hope this helps.
hyperorb said:
I am very confused on how to root RN3 (SD 650).
I need rooting for
- Titanium backup
- Adblock
There are multiple terms and multiple posts. Can any one guide.
What is Kenzo, Kate .... ?
What is global dev/chinese rom?
What I have learnt so far
Step 1 - I need to unlock bootloader. But how ??
Official method - Does it require flashing a new rom? Will I loose data?
Unofficial - Is there any safe method?
Step 2 - Flash recovery
Cofface and ZCX are stable TWRPs. Which one to use.
Click to expand...
Click to collapse
Welcome to Redmi Note 3 family.
Kenzo or Kate?
Snapdragon standard variant is called as a 'kenzo' and special edition Redmi note 3 with different radios version is called as a 'kate'.
Global/ Chinese?
There are two types of MIUI ROMs.
1. Global
2. Chinese
Difference in these both ROMs is that, you will find some chinese material here and there in chinese ROM. Global is fully in english.
Again there are two subtypes of these two ROMs which are Stable and Dev/Beta. Sometimes Beta/Dev ROM is also called as a 'weekly'.
So basically most of the devices have 4 official MIUI ROMs which are:
1. Global Stable
2. Global Beta or Global Dev
3. Chinese Stable
4. Chinese Beta or Dev
There is no connection between the type of ROM and unlocking bootloader.
Bootloader unlock method?
Since you know there are two methods to unlock the bootloader, I will discuss them one by one.
1. Official
You don't require to flash any latest or dev or chinese ROM to unlock using official method.
First of all you need a persmission from Xiaomi to unlock the bootloader.
Goto http://en.miui.com/unlock/
Login here. The account should be same as the one is on your phone.
Write the reasons for unlocking.
After that Xiaomi will grant you the permission. If you don't receive any SMS from Xiaomi, just check on the above link.
Even if you get the permission its most likely you will not able to unlock nootloader on first attepmt. But don't worry, try again after few days.
Use MiUnlock tool. Once you get the permision, that tool will be available on the above link or you can always download from here http://en.miui.com/unlock/download_en.html
2. Unofficial
I have unlocked my phone by unofficial method 6-7 months ago and I still have no issues at all.
Open this folder https://mega.nz/#F!LUxlHJBC!RK5_8fta4XWAVFqWoWrvjQ
It has everything what you need for unlocking bootloader unofficially.
Just follow this guide and you are good to go: GUIDE
You might have to disable Driver Signature Verification if you are using Windows 8 or higher (google it)
Recovery?
I will suggest you only and only following recoveries:
If you have unlocked your bootloader officially, You must use ZCX only.
If you have unlocked your bootloader unofficially, you must use either Alka or Cofface
Here is a thread where you will find everything about recoveries.
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
All download links are in that thread.
Hope this will help! Happy flashing! :fingers-crossed: :highfive:
skad00sh said:
Hope this will help!
Click to expand...
Click to collapse
What are you saying !!! .. This is more than what I could have asked for to start. :good: Many thanks for taking time to compile the information.
One more noob query. I have RN3 3GB 32GB version. Is it special edition or normal?
I am planning to flash unofficially - Recovery - Alka
One question - In your mega folder Kenzounlock.zip was uploaded in Sept. Can I use the "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download" from http://en.miui.com/a-234.html as replacement.
Many thanks for your help.
hyperorb said:
What are you saying !!! .. This is more than what I could have asked for to start. :good: Many thanks for taking time to compile the information.
One more noob query. I have RN3 3GB 32GB version. Is it special edition or normal?
I am planning to flash unofficially - Recovery - Alka
One question - In your mega folder Kenzounlock.zip was uploaded in Sept. Can I use the "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download" from http://en.miui.com/a-234.html as replacement.
Many thanks for your help.
Click to expand...
Click to collapse
I have same device. No problrm at all.
'kenzounlock.zip' should be flashed. Only that zip grants you ability to unlock bootloader. Don't flash any other zip.
Don't foget to activate 'OEM Unlocking' from Developer Options
To unlock Developer Options, tap on 'MIUI Version' 7 times.
Developer Options is situated at Settings>Additional Settings.
@skad00sh Unfortunately I moved forward with latest global stable zip.
- Unzip global stable Kenzo zip
- Found the unocked emmc_appsboot.mbn from the forum
- Replaced the file in /images folder
- Miflash (Beta version gave length less than zero error) therefore used MiFlash 20160401
- Flashed rom
- Fastboot mode
- Unlocked boot loader -> Auto reboot
- Had to force fastboot
- Oem device-info tells bootloader unlocked
- Reboot
- Red light blinking while charging
- Rom booted successfully.
Not sure why red light is blinking while charging
Edit :
I was able to use another emmc_appsboot.mbn from http://forum.xda-developers.com/red...nlock-twrp-t3494833/post69484805#post69484805.
Reflashed with replaced file. Now no more blinking red light.
Cofface TWRP from below link worked. Alka did not work.
http://forum.xda-developers.com/redmi-note-3/how-to/tutorial-miui-8-0-1-0-global-stable-t3449039
Rebooting now... Fingers crossed ..
hyperorb said:
@skad00sh Unfortunately I moved forward with latest global stable zip.
- Unzip global stable Kenzo zip
- Found the unocked emmc_appsboot.mbn from the forum
- Replaced the file in /images folder
- Miflash (Beta version gave length less than zero error) therefore used MiFlash 20160401
- Flashed rom
- Fastboot mode
- Unlocked boot loader -> Auto reboot
- Had to force fastboot
- Oem device-info tells bootloader unlocked
- Reboot
- Red light blinking while charging
- Rom booted successfully.
Not sure why red light is blinking while charging
Click to expand...
Click to collapse
So far you have done great!
Congrats!!
Red Light Blinking is common issue on unofficially unlocked bootloader devices.
Its just a firmware issue which can be fixed by flashing proper firmware.
Flash ROM from xiaomi.eu. Those ROMs are very clean and works perfectly with titanium backup. The issue with official MIUI ROM is that every time to try to restore a app from titanium backup, it asks for your permision. It is so annoying. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
In case you want to use current ROM without changing anything, you can flash following MIUI firmware from recovery... and you will be done with that red light thingy!
MIUI Firmware Link
I wonder why you still want to use MIUI when you can taste Nougat 7.1 easily!
In case if you want to use nougat, I will recommend you to use CyanogenMod 14.1, Ressurection Remix, AICP (I felt these ROMs are highly stable than other)
skad00sh said:
So far you have done great!
Congrats!!
Red Light Blinking is common issue on unofficially unlocked bootloader devices.
Its just a firmware issue which can be fixed by flashing proper firmware.
Flash ROM from xiaomi.eu. Those ROMs are very clean and works perfectly with titanium backup. The issue with official MIUI ROM is that every time to try to restore a app from titanium backup, it asks for your permision. It is so annoying. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
In case you want to use current ROM without changing anything, you can flash following MIUI firmware from recovery... and you will be done with that red light thingy!
MIUI Firmware Link
I wonder why you still want to use MIUI when you can taste Nougat 7.1 easily!
In case if you want to use nougat, I will recommend you to use CyanogenMod 14.1, Ressurection Remix, AICP (I felt these ROMs are highly stable than other)
Click to expand...
Click to collapse
Red light issue - [refer to edit in my previous reply. ]It is fixed. I had to use a different bootloader file. It worked with latest global stable.
Recovery I was unable to use Alka recovery (refer to your mega folder) . Had to install Cofface (refer to my previous reply).
EU Roms - My bad. I was not aware of those. Sigh !! so much effort I put. You are right TiBU asks about every single app restore. Besides for some app .. it hanged. I had to force reboot. Can I install these rom using TWRP Cofface recovery??
Nougat - This is my SO's fone. I need a stable daily driver for her. This is a day old phone. May be after sometime I will try 7.1
Honestly, I was very scared with RN3. It was my most confusing rooting. Compared to Moto Defy > Galaxy S3 > OP3 .. which were all very easy to manipulate.. But RN3 ..
Your initial post really paved way for me to move forward. Sincere thanks to you and others who helped me with my queries.
One thing is surprising that Cofface TWRP does not show EFS backup option
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Ivanlai said:
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Click to expand...
Click to collapse
There are 3 variants in the Redmi Note 3 series
RN3MTK code named "Hennessy" - with Mediatek SoC
RN3SD code named "Kenzo" - (with Qualcomm/SoC is Snapdragon 650), also called "Pro"
RN3SD Special Edition, code named "Kate" - "International version"also called "Special Edition" (Kate variant) of "pro", includes 800 base band (4g in somes isolated areas) and hardware is 2mm higher than kenzo.
Edit: Oops @Ivanlai You wrote the same thing. Looks like I still have lots of confusion . :silly:
Ivanlai said:
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Click to expand...
Click to collapse
Oh yeah! I forgot! My bad! MTK version is called as a Hennessy.
Rename that Alka recovery file to 'recovery.img' then copy it to your Minimal ADB and Fastboot folder.
After that open command prompt in that folder and enter following command
Code:
fastboot flash recovery recovery.img
Then alka will be installed.
You can flash EU roms directly from any recovery.
@skad00sh
1) Should I update recovery from Cofface to Alka ? If yes, how fastboot flash or TWRP install?
2) Before installing EU rom, do I need to replace the bootloader file emmc_appsboot.mbn
hyperorb said:
One thing is surprising that Cofface TWRP does not show EFS backup option
Click to expand...
Click to collapse
yes it is. use zcx or alka for backup
edit
if you want to flash another recovery image n ur phone is rooted thn use flashify app to flash any recovery img through your phone
Flash ROM from [URL="https://xiaomi.eu/community/threads/6-12-1.36462/" said:
xiaomi.eu[/URL]. Those ROMs are very clean and works perfectly with titanium backup. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
Click to expand...
Click to collapse
Do i have to replace the emmc_appsboot.mbn from xiaomi.eu ROM or just flash using Cofface TWRP?
Guys..i have redmi note 3 sd 650 miui 8.0.6...how should i install recovery..i wan to try cm roms??so many confusion regarding which is the right recovery to flash on my device...
hyperorb said:
@skad00sh
1) Should I update recovery from Cofface to Alka ? If yes, how fastboot flash or TWRP install?
2) Before installing EU rom, do I need to replace the bootloader file emmc_appsboot.mbn
Click to expand...
Click to collapse
1. Yes use Alka. It has all backup options. You will filnd EFS and other backup options in it. Since you have unlocked officially, use Alka only. An you can install it directly through TWRP install. No issues.
2. No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
$lim $hady said:
Do i have to replace the emmc_appsboot.mbn from xiaomi.eu ROM or just flash using Cofface TWRP?
Click to expand...
Click to collapse
No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
kitbor said:
Guys..i have redmi note 3 sd 650 miui 8.0.6...how should i install recovery..i wan to try cm roms??so many confusion regarding which is the right recovery to flash on my device...
Click to expand...
Click to collapse
Checkout 4th post of mine in this thread or click below:
http://forum.xda-developers.com/showpost.php?p=69920880&postcount=4
skad00sh said:
1. Yes use Alka. It has all backup options. You will filnd EFS and other backup options in it. Since you have unlocked officially, use Alka only. An you can install it directly through TWRP install. No issues.
Click to expand...
Click to collapse
Ok. Will install Alka.
By the way, I have unlocked unofficially. Hope that is ok.
skad00sh said:
No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
Click to expand...
Click to collapse
Thank you.. I flashed the latest 6.12.1 while waiting for the reply got stuck in mi account log in screen.. Clean flashed 6.11.3 and then dirty flashed 6.12.1 and lazy flasher.. Works perfect.. Using Cofface TWRP
I've just received today the 10T 5G CPH2415.
I unlocked the bootloader in the same way as the Oneplus 10Pro
in settigs OEM unlock and ADB Debug.
by Powershell:
adb devices
Adb reboot bootloader
fastboot devices
fastboot flashing unlock
in case of issue on installing the driver, in fastboot mode, on win11, you need to reboot Windows in the mode "Disable driver signature enforcement"
when the phone is started, reboot again in fastboot then I booted it with the boot.img of the indian version which I found (I patched it with Magisk 25.2).
fastboot devices
fastboot boot patched_boot.img
when it stared, I patched it with Magisk directly.
____________________________
Firmware updating (Full update) keeping the Root:
by using "oneplus local update for android 12" the root can be kept.
Install the firmware with oplocal, dont reboot, open magisk flash it on the second slot; only now you can reboot.
DON'T REBOOT after the FW installation.
The firmware can be downloaded through the app Oxygen Updater. (Full update)
---------------------------
Attachment:
Boot Patched 10T from Indian version img
OPLocal Update for Android 12 apk
Stock boot A06 CPH2415 img
Patched Boot A06 CPH2415 (Magisk 25.2) img
Marco589 said:
I've just received today the 10T 5G CPH2415.
I unlocked the bootloader in the same way as the Oneplus 10Pro
in settigs OEM unlock and ADB Debug.
by Powershell:
adb devices
Adb reboot bootloader
fastboot devices
fastboot flashing unlock
in case of issue on installing the driver, in fastboot mode, on win11, you need to reboot Windows in the mode "Disable driver signature enforcement"
when the phone is started, reboot again in fastboot then I booted it with the boot.img of the indian version which I found (I patched it with Magisk 25.2).
fastboot devices
fastboot boot patched_boot.img
You followed this guide
https://www.droidwin.com/root-oneplus-10t-via-magisk-patched-boot-img/
or did you only flash the patched boot.img?
Click to expand...
Click to collapse
You followed this guide
https://www.droidwin.com/root-oneplus-10t-via-magisk-patched-boot-img/
or did you only flash the patched boot.img?
slavekve said:
You followed this guide
https://www.droidwin.com/root-oneplus-10t-via-magisk-patched-boot-img/
or did you only flash the patched boot.img?
Click to expand...
Click to collapse
Don't follow that guide. You just need to boot (not flash) a patched boot image and then run direct install. This also creates backups of your stock images which you'll need when you OTA.
EtherealRemnant said:
Don't follow that guide. You just need to boot (not flash) a patched boot image and then run direct install. This also creates backups of your stock images which you'll need when you OTA.
Click to expand...
Click to collapse
It is true that when rooting the OnePlus 7 pro I only flashed the repaired boot.img. I was surprised that Sadique Hassan recommends otherwise for this model.
slavekve said:
It is true that when rooting the OnePlus 7 pro I only flashed the repaired boot.img. I was surprised that Sadique Hassan recommends otherwise for this model.
Click to expand...
Click to collapse
Again, DON'T flash the patched image! You must use the direct install method in Magisk after booting the patched image.
EtherealRemnant said:
Again, DON'T flash the patched image! You must use the direct install method in Magisk after booting the patched image.
Click to expand...
Click to collapse
I understand that, but in the instructions, the repaired vendor_boot.img is also flashed. Oneplus 7 Pro does not contain vendor_boot.img file in payload.bin
slavekve said:
I understand that, but in the instructions, the repaired vendor_boot.img is also flashed
Click to expand...
Click to collapse
Are you not listening to me? I just told you how to do it. Boot the patched image and run the direct install. Magisk installer will do what needs to be done for you. This is also the same thing the OP has done. Ignore those other instructions you found, they are incorrect and pose problems when you take OTA updates as OnePlus is moving away from full OTAs to incremental ones that will not flash to a phone with modified images.
For the record, patched dtbo and vendor_boot are needed as well but Magisk does this for you.
Ok, I will follow the instructions above when my phone arrives
any way to activate 5g & volte on non supported carriers - countries?
akaloith said:
any way to activate 5g & volte on non supported carriers - countries?
Click to expand...
Click to collapse
Unlock the bootloader, Install the Global ROM that supports 17 5G Bands both SA & NSA. Which Country you are in ?
Marco589 said:
I've just received today the 10T 5G CPH2415.
I unlocked the bootloader in the same way as the Oneplus 10Pro
in settigs OEM unlock and ADB Debug.
by Powershell:
adb devices
Adb reboot bootloader
fastboot devices
fastboot flashing unlock
in case of issue on installing the driver, in fastboot mode, on win11, you need to reboot Windows in the mode "Disable driver signature enforcement"
when the phone is started, reboot again in fastboot then I booted it with the boot.img of the indian version which I found (I patched it with Magisk 25.2).
fastboot devices
fastboot boot patched_boot.img
when it stared, I patched it with Magisk directly.
Click to expand...
Click to collapse
I have 10T Global, Indian and Chinese ROM Full Package ZIP file, I want to try Global & Chinese ROM on Indian 8/128GB Version
already unlocked bootloader, if I Flash Global or Chinese ROM will my device brick ?
As previously I was using MSM Download Tool which was free now it need authentication, so shifted to Fastboot Enhance
Will the process of flashing via payload.bin brick my device ?
Today it is possible to download EU full package CPH2315_11_A.06 using Oxygen updater
slavekve said:
Today it is possible to download EU full package CPH2315_11_A.06 using Oxygen updater
Click to expand...
Click to collapse
I already root mine OP10T Model CPH2415 which is international ROM but i tried to flash that CPH2315 in Oxygen Updater it was a success but the model of my phone was change also from CPH2415 to CPH2315.
I have OP8T Cyberpunk Edition Which Is Chinese ROM and i Flash Global ROM the thing is it change only the Build number which is right and the model Number still The same KB2000 but this OP10T is different including the model was change when i flash. Anyway it was a success but it shouldn't be like that.
ryu091 said:
I already root mine OP10T Model CPH2415 which is international ROM but i tried to flash that CPH2315 in Oxygen Updater it was a success but the model of my phone was change also from CPH2415 to CPH2315.
I have OP8T Cyberpunk Edition Which Is Chinese ROM and i Flash Global ROM the thing is it change only the Build number which is right and the model Number still The same KB2000 but this OP10T is different including the model was change when i flash. Anyway it was a success but it shouldn't be like that.
Click to expand...
Click to collapse
So that mean all 10T devices are China made and later flashed with region specific firmware's.
slavekve said:
It is true that when rooting the OnePlus 7 pro I only flashed the repaired boot.img. I was surprised that Sadique Hassan recommends otherwise for this model.
Click to expand...
Click to collapse
Hi @slavekve , Sadique this side, sorry for the confusion. Till the OnePlus 9, you only needed to flash the patched boot.img for root.
But with the OnePlus 10 series [10 Pro], flashing patched vendor_boot and vbmeta for disabling verity seems to have become an additional requirement in numerous instances.
But thanks to @Marco589 for letting us know that he has already achieved root without the vbmeta and vendor. Henceforth I have updated my post accordingly as well.
Guys, I have a CPH 2413 device and have tried several times to unlock bootloader... But fastboot commands do not work on my device. Have tried "OEM unlock" as well "flashing unlock" through fastboot. Updated the fastboot and adb drivers, tried to do it through platform tools as well... Got my device replaced as well after the first one didn't get unlocked...
Help needed please
gonetask said:
Unlock the bootloader, Install the Global ROM that supports 17 5G Bands both SA & NSA. Which Country you are in ?
Click to expand...
Click to collapse
I am in greece and carrier vodafone
will i sure have 5g and volte? cause device is not supported by vodafone greece
SREEPRAJAY said:
Guys, I have a CPH 2413 device and have tried several times to unlock bootloader... But fastboot commands do not work on my device. Have tried "OEM unlock" as well "flashing unlock" through fastboot. Updated the fastboot and adb drivers, tried to do it through platform tools as well... Got my device replaced as well after the first one didn't get unlocked...
Help needed please
Click to expand...
Click to collapse
I came across to the same issue, I solved by adding ".\":
.\fastboot devices
.\fastboot flashing unlock
PS
did the OS install the driver of the phone in fastboot mode?
Marco589 said:
I came across to the same issue, I solved by adding ".\":
.\fastboot devices
.\fastboot flashing unlock
PS
did the OS install the driver of the phone in fastboot mode?
Click to expand...
Click to collapse
.\ does not work. Can you please explain which tool you used? or how you managed?
My xiaomi phone is chenese version and the original rom is the official stable version of 12.8. I want to root my phone so I search relative theme on Ada ,as result I have found this thread(https://forum.xda-developers.com/t/rooting-the-mi-11-with-the-latest-xiaomi-eu-rom.4232347/).In this thread everything begin on xiaomi.eu rom,so I install xiaomi.eu rom on this thread .The problem was happened here, when I do as what the thread said download the rom which has matched my phone (I select the stable rom of xiaomi.eu_multi_MI11Lite5G_V12.5.8.0.RKICNXM_v12-11-fastboot.zip) and run the macos_fastboot_first_install_with_data_format.sh file my phone was stuck on fastboot....
phone infomations:
xiaomi 11 lite 5g (renoir)
Click to expand...
Click to collapse
what I have try:
1、boot twrp.img of matched my phone
fastboot boot twrp-3.7.0_11-0-renoir.img
Click to expand...
Click to collapse
but receive the blow error message
downloading 'boot.img'...
OKAY [ 4.397s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Device Error)
finished. total time: 4.398s
Click to expand...
Click to collapse
2、I search in the google and found this blog which similar with my situation
but still stuck on fastboot......
3、try to flash official rom which matched my phone use miflash tool
but still stuck on fastboot....
I do not know what can I do to take my phone back
Is there has any other methods can make my phone unbrick
Hello, that is an old miui version, i assume you have unlocked bootloader so you may try to install the latest china version wich is 14.0.6.0, you can search it in mifirm.net and try to install it with xiaomi tool v2, and if that does not work, then try again with mi flash.
You can search 'how to unbrick xiaomi with xiaomi tool v2' for more information. Good luck bro
97jota said:
Hello, that is an old miui version, i assume you have unlocked bootloader so you may try to install the latest china version wich is 14.0.6.0, you can search it in mifirm.net and try to install it with xiaomi tool v2, and if that does not work, then try again with mi flash.
You can search 'how to unbrick xiaomi with xiaomi tool v2' for more information. Good luck bro
Click to expand...
Click to collapse
Yes, I have unlocked boot loader.
Thank you for your suggestions ,I will make a try
97jota said:
Hello, that is an old miui version, i assume you have unlocked bootloader so you may try to install the latest china version wich is 14.0.6.0, you can search it in mifirm.net and try to install it with xiaomi tool v2, and if that does not work, then try again with mi flash.
You can search 'how to unbrick xiaomi with xiaomi tool v2' for more information. Good luck bro
Click to expand...
Click to collapse
still stuck on fastboot....
cyberexplorer said:
still stuck on fastboot....
Click to expand...
Click to collapse
flash 12.0.8 stock firmware with fastboot, with clean data,
rayman95 said:
flash 12.0.8 stock firmware with fastboot, with clean data,
Click to expand...
Click to collapse
Thank you for your suggestions which gave me light in dark...
I found here and other relative websites but only found 12.0.8.0 for renoir_eea_global version(eg.renoir_eea_global_images_V12.0.8.0.RKIEUXM_20210419.0000.00_11.0_eea_1e3641e85a.tgz)
But my phone is Chinese version, is that ok?
cyberexplorer said:
Thank you for your suggestions which gave me light in dark...
I found here and other relative websites but only found 12.0.8.0 for renoir_eea_global version(eg.renoir_eea_global_images_V12.0.8.0.RKIEUXM_20210419.0000.00_11.0_eea_1e3641e85a.tgz)
But my phone is Chinese version, is that ok?
Click to expand...
Click to collapse
you should take CHN firmware...or at least global version
rayman95 said:
you should take CHN firmware...or at least global version
Click to expand...
Click to collapse
But I only found 12.0.7 for CN (if you have 12.0.8 for CN please post the link), is ok?
cyberexplorer said:
But I only found 12.0.7 for CN (if you have 12.0.8 for CN please post the link), is ok?
Click to expand...
Click to collapse
normally yes...but take fastboot rom
rayman95 said:
normally yes...but take fastboot rom
Click to expand...
Click to collapse
still stuck on fastboot
cyberexplorer said:
still stuck on fastboot
Click to expand...
Click to collapse
Did you successfully flash - ie, it did not complain about eg Downgrade protection?
Actually, instead of flashing Xiaomi Fastboot ROMs by MiFlash, it is better to un-gzip and un-tar the tgz ROM, and find inside the bat scripts (sh scripts for Linux users)
Choose a script (judge by their names and by inspecting commands) that does not relock BL
Strip some 5-6 lines from the beginning of the script that deal with Downgrade protection (you will easily find it, also, it's usually separated from the rest by an empty line)
Then, run that bat script through Fastboot - this is then the same what MiFlash does (but it takes the original tgz and it uses the Downgrade protection part found in the script)
Btw, you can use this handy app to search through the ROMs:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
---
Btw, once when I had a similar Bootloop (Fastboot mode only) on Lisa (not Renoir) and flashing variozs official Fastboot ROMs did not help, I put my Lisa back to service (8 months ago, since then using it as my daily driver) by successfully flashing Xiaomi.eu Fastboot ROM
zgfg said:
Did you successfully flash - ie, it did not complain about eg Downgrade protection?
Actually, instead of flashing Xiaomi Fastboot ROMs by MiFlash, it is better to un-gzip and un-tar the tgz ROM, and find inside the bat scripts (sh scripts for Linux users)
Choose a script (judge by their names and by inspecting commands) that does not relock BL
Strip some 5-6 lines from the beginning of the script that deal with Downgrade protection (you will easily find it, also, it's usually separated from the rest by an empty line)
Then, run that bat script through Fastboot - this is then the same what MiFlash does (but it takes the original tgz and it uses the Downgrade protection part found in the script)
Btw, you can use this handy app to search through the ROMs:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
---
Btw, once when I had a similar Bootloop (Fastboot mode only) on Lisa (not Renoir) and flashing variozs official Fastboot ROMs did not help, I put my Lisa back to service (8 months ago, since then using it as my daily driver) by successfully flashing Xiaomi.eu Fastboot ROM
Click to expand...
Click to collapse
yeah,i use miflash to flashing rom.and it's successed except the check point error(because not lock)
I open the flash_all.bat with editor only autirollback check but no error
::check anti_version
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @echo "Antirollback check error" && exit /B 1
Click to expand...
Click to collapse
I run the flash_all.bat again just now no any error about "downgrade protection",BUT still stuck on fastboot
zgfg said:
I put my Lisa back to service (8 months ago, since then using it as my daily driver) by successfully flashing Xiaomi.eu Fastboot ROM
Click to expand...
Click to collapse
I really not understand how do you flashing xiaomi rom successfully
cyberexplorer said:
I really not understand how do you flashing xiaomi rom successfully
Click to expand...
Click to collapse
It was not the official Xiaomi ROM but let's say debloated Xiaomi.eu ROM (they are based on CN ROMs but made to work internationally)
You can search through the Stable and Weekly ROMs, you can go back from the current A13 to A12 but I'm not sure how was Renoir the Renoir supported
There is always a table in the post #1 which devices we're supported and by what type of ROM (TWRP, Fastboot or hybrid), instructions and links to download
www.xiaomi.eu
zgfg said:
It was not the official Xiaomi ROM but let's say debloated Xiaomi.eu ROM (they are based on CN ROMs but made to work internationally)
You can search through the Stable and Weekly ROMs, you can go back from the current A13 to A12 but I'm not sure how was Renoir the Renoir supported
There is always a table in the post #1 which devices we're supported and by what type of ROM (TWRP, Fastboot or hybrid), instructions and links to download
www.xiaomi.eu
Click to expand...
Click to collapse
oh,i got it. My phone was bricked because of flashing a xiaomi.eu rom which is stable,so only weekly rom maybe worth make a try...
cyberexplorer said:
oh,i got it. My phone was bricked because of flashing a xiaomi.eu rom which is stable,so only weekly rom maybe worth make a try...
Click to expand...
Click to collapse
You should try with a Fastboot type ROM. They usually flash more (deeply) than OTA type Recovery ROMs
zgfg said:
You should try with a Fastboot type ROM. They usually flash more (deeply) than OTA type Recovery ROMs
Click to expand...
Click to collapse
ok, i will make a try
zgfg said:
You should try with a Fastboot type ROM. They usually flash more (deeply) than OTA type Recovery ROMs
Click to expand...
Click to collapse
Unfortunately,still stuck on fastboot
Download rom from https://mifirm.net/model/renoir.ttt#cn
Select China > Fastboot stable.
Extract all content (7zip), again, and again until you see the images folder and the "flash.all.bat" files. Put everything in c:\rom
Download MiFlash20210226, extract also to c:\miflash
Go to fastboot (volume down + power)
Select c:\rom and press Flash.
This WILL work. Good luck.
dwensch said:
Download rom from https://mifirm.net/model/renoir.ttt#cn
Select China > Fastboot stable.
Extract all content (7zip), again, and again until you see the images folder and the "flash.all.bat" files. Put everything in c:\rom
Download MiFlash20210226, extract also to c:\miflash
Go to fastboot (volume down + power)
Select c:\rom and press Flash.
This WILL work. Good luck.
Click to expand...
Click to collapse
I have done this many times, but finally it's still stuck on fastboot
Hello, I'm having trouble restoring my Redmi note 9s to the stock firmware, basically I installed a custom rom but I want to revert back to stock since it has annoying problems and I'm fed up dealing with them.
I tried downloading a stock firmware and installing it with official Xiaomi tools but I just can't install them for my life, even got a bootloop, thought bricked the phone and that scared me lol. (it failed to install the stock firmware halfway)
My problem relies on the official tool not working and the drivers not working, the tool detected my phone after troubleshooting for like 4 hours searching a driver and trying all the Xiaomi flash tool versions I found, but it just won't install the official firmware, always giving some error.
If anyone here is kind enough to maybe direct me to a guide that works or just tell me what worked for them that would be appreciated, I just want to finally install Global firmware on my phone.
Thanks!
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Okay, just so you know, I installed a miui custom rom from here and have been running that since, so I will need to back up my phone, install miflash and try to finally get back into the stock rom.
When I'm done with that I'll try installing the stock firmware and post it to you
Muhammad Juman said:
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
Click to expand...
Click to collapse
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
dekannomad said:
dekannomad said:
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Muhammad Juman said:
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Click to expand...
Click to collapse
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
dekannomad said:
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
Click to expand...
Click to collapse
Here is guide
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
dekannomad said:
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
Click to expand...
Click to collapse
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
dekannomad said:
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
Click to expand...
Click to collapse
What OS are you using?
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Damn it says the system has been destroyed, so now Im back to the situation I was in, I only have my custom recovery and fastboot
NOSS8 said:
What OS are you using?
Click to expand...
Click to collapse
Win 10, a few updates missing but basically up to date.
If my pc is the problem I have a laptop, which I never connect my phone to, that I can try on. It's on win 10 too but I haven't updated in a while since I don't use it often
Device manager/view/show hidden devices.
Do you have this?
NOSS8 said:
Device manager/view/show hidden devices.
Do you have this?
View attachment 5901529View attachment 5901531
Click to expand...
Click to collapse
This is what I have, I'm even using the original cable that my phone came with, which is brand new since I don't use it to charge it in everyday use.
One is unplugged, one is with it in fastboot mode
On this image, you have selected show hidden devices?
NOSS8 said:
On this image, you have selected show hidden devices?
Click to expand...
Click to collapse
Yes
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
NOSS8 said:
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
Click to expand...
Click to collapse
Okay I did that, I'm going to restart my pc. I should have known I was missing something. Should I try to install the firmware again?