Hi everyone..
i am looking for the TWRP for the X96S, that used to be hosted by atvxperience that does no longer exist..
here is a copy paste of the thread
Put the attachment file in SDCard/USB Drive
2. Plug in the USB
3. Plug in the power while holding the reset button(found inside the AV Ports usually)
4. After you get into recovery, use remote to select Apply Update from SDCard
5. Select the TWRP_322.zip
6. You're now in TWRP.
Caution:
* Do not use the Reboot->System option from TWRP. You'll have to power off the device manually.
* This is only a temporary boot TWRP, your stock recovery will be intact after a reboot.
apps.atvxperience.com
MIRROR if the above link doesn't work:forum.atvxperience.com/viewt...5&p=6700#p6700[/url]
Credits: Vasily[
Does anyone have a download for this, i would be eternally grateful .,
Best
Nick.
Related
Hello :
I am going to be flashing my droid phone for the first time (nOOb), and I want to make sure I will doing it correctly.
I have gathered what I believe to be the correct information, and have listed it below.
I am hoping someone can look at the steps to make sure everything is correct and in order.
If I am missing something, or if something does not look right, could you please correct, ammend, or add as necessary.
This would be a tremendous help to me, and I would greatly appreciate it.
Thank you.
1. Root phone using SuperOneClick v2.3.3
A. Install the USB driver for your phone onto your PC
B. Enable USB debugging mode on phone
C. Download and install Java SE developers kit
D. Download and install Android SDK developers kit
E. Connect phone to computer using USB
F. Download and install SuperOneClick v2.3.3
G. Make sure your SD card is NOT mounted
H. Press "Root"
I. Wait for "Success" confirmation
2. Install ClockworkMod Recovery via ROM manager
A. Download and install ClockworkMod ROM Manager
B. Once installed, open ROM Manager
C. Press "Flash ClockworkMod Recovery"
D. Reboot or Power Off
3. Perform a Nandroid backup (full system backup)
A. Make sure you have an install SD card and you have enough free space available on the SD card
B. Open ROM manager and hit reboot to recovery
C. A pop up will ask if you want to reboot into recovery, press OK
D. Phone will reboot and boot into ClockworkMod Recovery
E. Once in CWR, use volume up and down buttons to scroll up and down the menu list
F. Scroll down to "backup and restore"
G. Press "n" button to enter or go to nex sub-menu
H. Press "backup" to start the nandroid backup process
I. Once complete, you will be brought back to the main menu and it will read "Backup complete!"
J. Now scroll up or down to "reboot system now" and press "n" to execute.
K. Once booted and back to Home screen, open your favorite file browser
L. Make you way to your SD card: folder /clockworkmod/backup/(date of backup)
M. Check to see if you have files files: boot image, cache image, date image, nandroid check file, and system image. (note: Usually you will also see a recovery.img (image) file, which is the file that holds the backup for the recovery utility itself. You will see this files with most custom ROM packages.)
Are the above steps correct? Am I missing anything, or is something incorrect?
Thank you!
All is ok with the steps 2 and 3, but in the step 1 isn't necessary to install the Java SE Dev Kit or the Android SDK, SuperOneClick comes with all the necessary tools
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
mypd1991 said:
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
Click to expand...
Click to collapse
can anyone give me stock firmware of lenovo a1000g?
nick84tl said:
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
Click to expand...
Click to collapse
there is a post post in lenovo forum PREAMBLE-FOR-LENOVO-A1000-ROM-RECOVERY-ETC
u can a nandroid backup there ,after installing twrp ,just restore back up backup
place the back up u need to create a folder "TWRP"
in twrp "BACKUPS"
in backups "LENOVO_A1000_MT8317"
PUT THE RESTORE FILES IN A FOLDER CREATE THE "RESTORE FOLDER" IN ABOVE LENOVO FOLDER
Hope This helps
Caution MAKE SURE TO BACKUP YOUR IMEI AND MAC ADRESS AND BLUETOOTH ADRESS
Note : Step 6 and 7 can be shortcutted by Pressing on the hard reset button while/while not connected to PC
: this will erase all data on your internal memory, so keep all the data you wanna back up in PC or External SD card and remove it (just to be safe)
ok, so
Step 1 google A1000F_A412_01_23_130822_ROW_USER, you should find it in 4shared(dot)eu
Or http://www.4-shared.eu/download/bt6fqlKPInMXDN3q7CPuW1/A1000F-A412-01-23-130822-ROW-USER.html
Step 2: once you finish downloading, extract it, then go to the FlashTool folder and look for FlashTool.exe
Step 3, once you open FlashTool.exe, Click the checkbox DA DL All with Checksum
Step 4 Now load scatter file MT6577_Android_scatter_emmc (located in A1000F_A412_01_23_130822_ROW_USER Folder, it will be the only file show other than the flash tool folder)
Step 5 now click Format> Format All partition except Bootloader > validation > ok
Step 6 Now connect your USB to MiniUSB (charger cord) to the computer but DO NOT PLUG IT YET TO THE PC
Step 7 now hold down on your Up volume button and wait 10 sec. then plug it into pc
Step 7.1 (not really) the loading bar on the bottom of SP flash tool should turn red and other difirent colors, once its finished, there should be a popup saying OK, Close it and youre done
Step 8: now Click on download, after you download, look at Step 6 to 7.1
Step 9 IF the device fails to boot, download this ( will put link to A1000F fix tool)
Step 10 press the hard reset button (besides SD card slot) or Follow Step 6 to 7.1
Step 11 Boot UP
To install TWRP 2.5 ( Found it in lenovo russian forums) (Tested the file) (worked for my IdeaTab A1000-F)
Step 12 Download From This (Direct Link) http://lenovo-forums.ru/Files/OS/Tablets/A1000/Custom/A1000T_TWRP_v2.5.0.0.zip
Step 13 Extract it
Step 14 IGNORE the included scatter file from the TWRP download (had problems with it) and follow Step 4
Step 15 On the loaded files from Scatter file, look for recovery ( 7th File), Click on it, there should be a file explorer pop up
Step 16 On the file explorer pop up, look for the A1000F_TWRP_v2.5.0.0 folder you just extracted AND then click on the recovery.img found inside
Step 17 Now Choose Firmmware -> Upgrade and do Step 10
TO ROOT WITHOUT PC (must do step 1-17)
Step 18 Boot to recovery (hold power button + up volume button AT THESAME TIME)
Step 19 You should be at TWRP recovery, Tap on Reboot>System and there should display a warning about the system not being rooted, and it should prompt you to slide to root, SLIDE IT, it should reboot automatically
Step 20 in your app drawer, look for SU installer and click on it,Your going to be prompted to innstall SU via playstore or via TWRP (i did it via TWRP bacause im lazy, and the system apps are updating, but your free to do otherwise) it should reboot, and vioala, your rooted
To Update Firmware
Step 21 Open SuperSU>settings>scroll down>enable pro (SuperSU should restart) then Open SuperSU again>settings>survival mode
Step 22 Download This (download 1) (will update to put link) and this https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Step 23 Open the Rashr Flasher tool you just downloaded from playstore and find Download 1 then navigate Download 1 file location (Named Recovery Folder) > Stock and tap on the recovery img
Step 24 download and install the Update from Settings>about tablet>Firmware Update (make sure you have enabled survival mode in super Su, or else you will loose root privilages)
To go back to TWRP
Step 25 just use the Rashr Recovery tool and go to download 1 file location (named Recovery Folder) > TWRP and tap on the recovery img
ＨＥＬＰ！
I tried the flash tool thing ,and the red line under did popes out, about ten seconds later it popes out a message, and says that ＂ｆｌａｓｈ ｔｏｏｌ ｅｒｒｏｒ＂，＂Ｓ＿ＤＡ＿ＤＲＡＭ＿ＮＯT_SUPPORT"(3004)
What can I do?
Please help me!
P.S.my ideatab a1000f was hard bricked ,it can not go to my twrp recovery mode that i had before it bricked.:crying::crying::crying:
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Thank You DAVI FELICANO and deej_roamer for their help. I have now successfully rooted my phone. If someone else has a problem, go to Page 2 for the solution.
You can use the defalt method, dont need to change anything.
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
DAVI FELICIANO said:
You can use the defalt method, dont need to change anything.
Click to expand...
Click to collapse
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
I know friend. I was talking about games like asphalt 8 and dead trigger which have data of size 1.5 gb because of which I wanted to root my phone. Thank you for the advice.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
5zan said:
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
If you read my post correctly then that's what I have written.
5zan said:
You can install only one gphone and due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
I know friend. Thats why in this post I asked how to root the phone and not how to install games on sd card. Thanks.
Harsh862 said:
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
Click to expand...
Click to collapse
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
DAVI FELICIANO said:
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
Click to expand...
Click to collapse
Ok. Thank you friend. I will reply if I face any problem. Thank you again.
Any idea of rooting the device without unlocking BL...thnx in advance
Sent from my XT1022 using XDA Premium 4 mobile app
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Harsh862 said:
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Click to expand...
Click to collapse
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Urgent help needed
Harsh862 said:
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Click to expand...
Click to collapse
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
problem successfully resolved
Harsh862 said:
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Click to expand...
Click to collapse
Thanks harsh862....it really helped a lot..,. Really thanks
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
Is your recovery.img placed in the "C:\Program Files (x86)\Minimal ADB and Fastboot"?
It need to placed in it or you'll get an error.
Boot loader is LOCKED !! cannot be unlocked !! so no root for me ?
Hi guys, Anyone knows about custom rom or custom recovery for this device?
Custom recovery is easy with the right tools!
marcosek said:
Hi guys, Anyone knows about custom rom or custom recovery for this device?
Click to expand...
Click to collapse
You can make your own ClockWorkMod custom recovery for ANY phone as follows:
WHAT YOU NEED
* Your phone with USB Debugging enabled
* Root access (in other words, your phone must be rooted)
* Busybox installed on your phone
* MTK Droid Tools
* Your computer
HOW TO DO IT:
1. Down load MTK Droid Tools and install on your desktop (do people still have those)
2. Install the Flashify app on your phone (from the Play Store)
3. Open Flashify on your phone
4. Select the Backup/Restore option
5. Back up the current kernel to your SD card (name it it stock_boot.img)
6. Back up the current recovery to your SD card (name it it stock_recovery.img) & close the Flashify app
7. Copy the two files from your SD card (it's saved under Android>data>com.cgollner.flashify>files>flashify-backup) to your desktop NOW YOU HAVE BACKUPS OF YOUR STOCK BOOT AND RECOVERY IMAGES IN CASE YOU EVER NEED THEM IN FUTURE
8. Run your MTK Droid Tools as Administrator and connect your phone to the desktop via USB (you'll see details about your phone in Phone Information ... you can ignore this but it does confirm that MTK Droid Tools recognizes your phone)
9. Now select the tab called "root, backup, recovery"
10. Click on the "Recovery and Boot" button
11. MTK is going to ask you where is the BOOT image for your phone...just select the BOOT image from the folder to which you copied the BOOT image on your laptop
12. MTK is now going to create a CWM custom recovery for your phone. It stores this in its subfolder called "recovery"
13. Now just go to this recovery subfolder. You will see TWO files. Now you rename the one that has "_recovery_" in the name to cwm_recovery.img. DO NOT MAKE THE BONEHEADED MISTAKE of using the file that has "_BOOT_PATCHED_" in the name!
14. Copy the newly renamed cwm_recovery.img to your SD card on the phone
15. Close the MTK Droid Tools program...it's work is done
16. Reopen the Flashify app
17. Select the Flash option and choose the RECOVERY IMAGE from the list of options. DO NOT...I REPEAT...DO NOT SELECT THE boot image OPTION. YOU WILL SURELY BRICK YOUR PHONE AND YOU WILL NEED TO FLASH A SYSTEM BACK TO THE PHONE. Since you have no custom recovery yet, you will be in a very difficult spot! DO NOT DO NOT DO NOT flash anything to the boot partition!!!!
18. Now that you have selected RECOVERY IMAGE, you can now choose the cwm_recovery.img and let flashify do its thing.
19. Once Flashify is done flashing, it will give you the option to REBOOT...do that
20. Behold your new CWM custom recovery
A couple important notes:
* I'm not responsible if you do something boneheaded like flashing the cwm_recovery.img to your boot partition and muck up your phone. I've already warned you repeatedly NOT to do that. It's an amateur mistake (that I made once...LOL!) DO NOT MAKE THIS MISTAKE!
* You did not really need the stock_recovery.img file for anything. BUT I MADE YOU BACK IT UP JUST IN CASE (you can always flash your stock recovery back to the phone). SAVE YOUR STOCK RECOVER AND BOOT IMAGES.
* USE YOUR NEW CWM RECOVERY AND IMMEDIATELY BACKUP YOUR ENTIRE PHONE TO YOUR SD CARD AND PLACE A COPY SOMEWHERE ON YOUR DESKTOP! Now you have two copies. If you ever want to return your phone to stock, just restore your backup and reflash the stock recovery. Then UNROOT your phone. Now, you're completely stock.
* While you're at it, use MTK Droid Tools again and select the SCATTER FROM FILE (and save the map somewhere convenient).
Pixel 2 Boot Animations. (Huawei Ascend XT2) (H1711)Preview - White - https://www.youtube.com/watch?v=XrXHzTr2TrM
Preview - Black - https://www.youtube.com/watch?v=SR6wrGwHYvQ
These were originally posted in this thread by TECHNO_THUNDER (Please go over there and give him thanks!)
But the files over there will not flash correctly onto our Huawei XT2 because the bootanimation.zip file that we need to replace is located in a completely different location on our device.
I solved this issue by repacking and making a new flashable zip file that will flash the files to the right location. These boot animations look pretty awesome on our device so i thought I would share my zips with the community here.
This is my first time ever creating flashable zips so bear with me. I tested all of them multiple times just to be safe so you should have no problems.
Please back up your phone before installing mods. I cant be responsible if you brick your device
Instructions:
1. Place zip on your External SD.
2. Reboot to TWRP recovery.
3. Hit KEEP READ ONLY.
4. Go to INSTALL and SELECT STORAGE and then select Micro SD Card.
5. Find your zip file and select it. Then swipe to Flash.
6. Delete Cache and click reboot system. (Make sure to hit Do Not Install before the reboot)
Your phone will reboot and there might be some lag after the first boot but that should go away after the second reboot.
Download:
Pixel 2 Black Boot Animation 720p - Google Drive Mirror
Pixel 2 White Boot Animation 720p - Google Drive Mirror
And if you need to return to stock. Simply flash the zip below
Huawei Ascend XT 2 Stock Boot Animation - Google Drive Mirror
Alternatively you can extract the zip file and copy the bootanimation.zip inside into the /version/special_cust/H1711/att/us/media folder using any root file explorer and then reboot your phone.
Enjoy! :good:
nicely done friend. This saves me the headache of doing it manually each time I decide on a clean install.