Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Tutorial
albertwesker17 said:
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Click to expand...
Click to collapse
Hi, Albert, I think you are the one who did this tutorial. THANKS :highfive: . It worked for me; XDA is the most known comunity so I think you should post it here too...
Mensaje original:
"(…) Download the application "Y200ToolBox".
Then, configure the device
> Settings -> Applications -> Quick Restart (uncheck)
> Settings -> Applications -> Development -> USB debugging (enable)
Adb drivers installed connect the device and given the option to finish installing the phone disconnected).
Turn off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
Select the Root + CMW
It takes a few seconds to work, do not touch anything.
It takes a while because the software will be doing some work, but it tells you when the process is finished completely and boot.
And you'll be already root users”
It work perfect for me for rooting, CMW I’m still trying, and when I get it I’ll post it. I hope it will work for everybody.
All credits to the friends in MyHuawei.net for the creation of the tool”
“Root Huawei Y200 Modelo U8655-51
Para los que no han podido ser Root en este modelo con otros métodos (no discrimino ni digo que no funcionan solo es otra alternativa)
Descargamos la aplicación Y200ToolBox al final dejo el link
Luego configuran el dispositivo
Configuración -> Aplicaciones -> Reinicio rápido (desmarcar)
Configuración -> Aplicaciones -> Desarrollo -> Depuración USB (activar)
Instalan los drivers adb, conectan el dispositivo y les dará la opción de instalarlos al terminar desconectan el teléfono
Apagan el dispositivo sacan la batería unos segundos luego la colocan de nuevo encienden el dispositivo en Fastboot con la combinación de las teclas [Volumen- / Poder] durante 15seg se quedara estancado en el logo
Conectan el dispositivo a la PC y ejecutan el software
Selecciona la opción Root + CMW
Dejan que trabaje se tardara unos segundos NO TOQUEN NADA
Lo dejan un rato ya que el soft. Estará haciendo unas tareas más el avisara cuando todo el proceso haya terminado completamente se apagara y encenderá nuevamente
Y listo ya serán usuarios Root"
A mí me funciono perfectamente para el Root, aunque el CMW todavía no me funciona. Si lo consigo lo pongo bueno espero que les sirva a los que tienen este equipo que a mi parecer es muy bueno
Todos los créditos por la creación de la herramienta a los amigos de MyHuawei.Net”
Click to expand...
Click to collapse
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Cuando usé la herramienta no funcionó, así que abrí el directorio de instalación Archivos de Programa/MyHuawei.Net y encontré un archivo BAT: “root.bat”, que corrí e hizo el trabajo, tomó como 5 min. Sigan las instrucciones de Albert en su tutorial y corran “root.bat” en vez de “Y200Toolbox.exe” si les ocurre. Esperen un poco, el teléfono se reiniciará sin privilegios Root y luego se reiniciará de nuevo y finalizará el rooteado.
El mensaje de mi error fue algo como No es una aplicación win32 valida.
XDA doen't let me post the link. Search "Y200ToolBox" in google.
XDA no me deja postear el link. Busquen "Y200ToolBox" en google.
tutorial made by albertwesker at Htcmania
tutorial hecho por albertwesker en Htcmania
I discovered the solution to the error by myself, any questions please ask.
La solución a el error de la aplicación lo descubrí por mi cuenta, cualquier cosa pregúntenme.
thanks
it achieves exactly is mine and quice compratir as I did for this team they have not remembered thanks for bringing xda but I had no problem but brought greetings friend
l7wahn said:
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Click to expand...
Click to collapse
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Answers
bakuradits said:
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Click to expand...
Click to collapse
Why did your pc restarted? or do you mean your Device?
This is what the root.bat do:
first it erase the recovery image and flash an image with cwm (step that will make your device to not get into the recovery any more... There's a solution)
second it flash the y200recovery.img that is in the y200toolbox directory
third it boots
then when the device boots into the android software and you see the loader, or the lock (depending on your configuration) it will run a shell in adb that will get the superuser.apk in the /system directory. If you're using an Huawei u8655-51, there will be not a chance to damage anything if your pacient.
last it sends the adb reboot command to the phone and the phone boots rooted.
Know, make all things again, but wait until the command promt shuts itself.
Alfredohs esto es para ti:
si dañaste el proceso de inicio es porque tal vez usaste otro ".bat" en el directorio. Esto va a dañar el boot.img de tu teléfono, debes usar el stockkernel.bat en modo fastbot para restaurarlo.
If you damaged the booting process in the phone it might be because you used another ".bat" in the directory. Which will change the boot.img so you should use the stockkernel.bat whit the device in fastboot mode to restore it.
Hi... I have used "Y200ToolBox" to root my phone, but it seems something went wrong. I tried to do it again, but while I restart the phone it restarts to CWM recovery. I don't know when this happened. So I think I disconnected the phone before the rest of the process completed the first time I tried, I mean the rooting part... Can you help me to solve this?
--------------------------------------------------------------------
Hola, he usado "Y200ToolBox" para rootear mi fone, pero parece que algo salió mal. Intenté hacerlo de nuevo, pero mientras reinicio el fone este se va al CWM recovery. No sé cuando pasó, así que pienso que lo desconecté antes de que cumpliera el resto del proceso la primera vez que lo hice, me refiero a la parte del rooting... Me podrían ayudar a resolver esto?
Huawei ascend y200 FM apk required
Hi
I rooted my Huawei ascend y200 and accidentally removed the FM application. If you have the apk please share it
I wanted to relive my remaining with motorola logo motorola ("M") and now my phone when I want to charge the battery is red to a minimum and then strip
*
"Err: 0x0004"
"Fastboot: Mode"
*
when I want I can not flashing program recognizes me and flashes but after 40 seconds I restarted the phone and turns to throw the same ... when you pull "0x0009" is flashing
*
My pc recognizes the phone but can not flashing apparently, has a solution or died?
The pc recognizes my devices appear "xt626"
I was reading and saw that I need the original firmware but from what I saw there ...
--------------------------------------------------------------------------------------
Quise revivir mi motorola que quedaba con el logo de motorola ( "M" ) y ahora mi celular cuando lo quiero cargar queda con la bateria en rojo al minimo y despues tira
"Err : 0x0004 "
"Fastboot : Mode"
cuando lo quiero flasharlo no puedo el programa me lo reconoce y lo flashea pero despues de 40 segundos me reinicia el celular y vuelve a tirar lo mismo ...cuando se flashea tira "0x0009"
Mi pc al celular lo reconoce pero no se puede flashar por lo visto , tiene solucion o murio ?
The pc recognizes my devices appear "xt626"
I was reading and saw that I need the original firmware but from what I saw there ...
faculakd said:
I wanted to relive my remaining with motorola logo motorola ("M") and now my phone when I want to charge the battery is red to a minimum and then strip
*
"Err: 0x0004"
"Fastboot: Mode"
*
when I want I can not flashing program recognizes me and flashes but after 40 seconds I restarted the phone and turns to throw the same ... when you pull "0x0009" is flashing
*
My pc recognizes the phone but can not flashing apparently, has a solution or died?
The pc recognizes my devices appear "xt626"
I was reading and saw that I need the original firmware but from what I saw there ...
--------------------------------------------------------------------------------------
Quise revivir mi motorola que quedaba con el logo de motorola ( "M" ) y ahora mi celular cuando lo quiero cargar queda con la bateria en rojo al minimo y despues tira
"Err : 0x0004 "
"Fastboot : Mode"
cuando lo quiero flasharlo no puedo el programa me lo reconoce y lo flashea pero despues de 40 segundos me reinicia el celular y vuelve a tirar lo mismo ...cuando se flashea tira "0x0009"
Mi pc al celular lo reconoce pero no se puede flashar por lo visto , tiene solucion o murio ?
The pc recognizes my devices appear "xt626"
I was reading and saw that I need the original firmware but from what I saw there ...
Click to expand...
Click to collapse
You have to go to the Fastboot: Mode menu and there find the option that says Reboot, One time happened, then i reflashed the rom and no more problems. What tent to happen is that the phone wont reboot by it self after the M logo show after flashing the ROM, so just wait the 15 to 25 min that the flashes take and the battery off and reboot the phone and it will boot normally.
------------
Tenes que entrar en el menu mismo donde esta el Fastboot:Mode y buscar le que dice Reboot algo y a mi me funciono, y despues le reflashe la ROM y listo, lo que suele pasar despues es que al flashear la ROM no pasa del logo de la M y solo tenes que esperar los 15 a 20 minutos que toma flashear el telefono y le sacas la bateria y lo reincias. Despues inicia normalmente.
Hola,no hace mucho intente instalar clowermod recovery en mi huawei y635-l03 pero cuando lo intente reiniciar no pasaba de el fast booot y dice phone locked y no puedo entrar al recovery por que no lo abre,no encuentro su rom stock necesito ayudaa :crying::crying::crying:
Download http://download-c.huawei.com/download/downloadCenter?downloadId=48503&version=112543&siteCode=ca extract it. Rename folder dload1 to dload. Plug sdcard back to phone and hol vol up vol down and power. Phone should fix but dont touch anything unit it reboot (if stuck at 0% you did something wrong)
Muchísimas gracias! He podido recuperar mi móvil por ti! Ademas no se me ha perdido nada!
Una cosa, al descargar el archivo, en la memoria sd tenéis que meter la carpeta dload, luego sacar la memoria sd del pc y meterla en el movil y por ultimo, pulsas el boton volumen + y volumen - y power y te encenderá en otra venta (no es fastboot) y hay le das al botón power y ya iniciara tu móvil (no se me ha perdido ningún archivo)
Almost the same problem
I have, more less the same problem, but in my phone says PHONE Unlocked in red, but if I use the fastboot tool to flash the boot, recovery and system images, and then reboot the phone, it's still stuck in the loop, and if I plug it in my computer, then enter again in the fastboot&rescue mode.
And if I try to copy the update.app to de dload folder of the SD, and then power on the smartphone, it doesn´t work...
So, there is any solution??
Thanks so much
Good. My cellular one had remained plaster in the logo of beginning and due to this unload the Rom Stock/Firmware and the folder dload copy it in the Card SD. Press Power, Vol + and Vol - and it began the installation. On having initiated to the telephone he asked me " Update of Software " on having disburdened I skip the option to install and restart the equipment. Restart it and it went away to the terminus emui. But 5 hours happened and the cel followed in 0 % so I decided to take the battery from him and to do the same procedure of the update.app For my surprise on having made it immediately was jumping the mistake. " Software Install failed " And eh here where I come to you, does it design someone of since this solves?
-----------------------------------------------------------------------
Buenas. mi celular se había quedado pegado en el logo de inicio y debido a esto le descargue la Rom Stock/Firmware y la carpeta dload la copie en la Tarjeta SD.
Presione Power, Vol+ y Vol- y comenzó la instalación.
Al iniciar al teléfono me pidio "Actualización de Software" al descargarse me salto la opción de instalar y reiniciar el equipo.
Lo reinicie y se fue a la terminal emui. Pero pasaron 5 horas y el cel seguia en 0% así que decidí quitarle la bateria y hacer el mismo procedimiento del update.app
Para mi sorpresa al hacerlo inmediatamente me saltaba el error. "Software Install failed"
Y eh aqui donde acudo a ustedes, alguna idea de como solucionar esto?
miren... resulta que mi defy entra en bootloader... si... pero RSD lite no me lo reconoce .. probe de TODO....
desde:
-Cargarlo al 100% con un cargador universal (porque se quedo sin sistema creo... porque no carga normalmente)
-Hacerles WIPES desde el POWER y volumen - (todo tipo)
-intentar abrir TWRP .. ( se apaga instantaneamente ... como si no tuviera carga)
-iniciarlo normalmente.. ( no funciona porque se apaga... creo que se quedo sin sistema porque con cargador normal no carga)
-abrir el segundo arranque (pasa lo mismo que con el TWRP .... se apaga!)
Dato importante:
-Habia instalado android 4.4.4 pero... se habia ***** por haberlo ruteado.. debido a esto intente flashearlo.. cuando me devolvieron mi PC (estaba en arreglo) se quedo sin carga ( tuve que comprar cargador universal) y luego de cargarlo al 100% puse bootloader... intale RSD lite.. (probe muchas verciones) luego los drivers de motorola (probe muchas verciones.. incluso de la pagina original ) .. asique aclaro.. el bootloader anda... el telefono anda normalmente.. pero se quedo sin sistema.. cuando lo conecto a PC hacer ruido pero el RSD lite no lo reconoce (solo el PC)
-tengo una rom lista.. pero si no me lo reconoce no puedo hacer nada ....<_<
EN FIN.... espero su respuesta ... confio en ustedes ... ! SALUDOS
Translation
Look ... it turns out that my defy goes into bootloader ... yes ... but RSD lite does not recognize it ... probe of EVERYTHING ....
since:
- Charge it to 100% with a universal charger (because it ran out of system I think ... because it does not load normally)
- Make them WIPES from the POWER and volume - (all type)
-try to open TWRP .. (shuts off instantly ... as if it had no load)
- start it normally .. (does not work because it goes off ... I think it ran out of system because with normal loader does not load)
-open the second boot (same as with the TWRP .... it goes off!)
Important fact:
-I had installed android 4.4.4 but ... had ***** for having routed it .. because of this I try to flash it .. when they returned my PC (I was in arrangement) I was without load (I had to buy universal charger ) And after loading it to 100% I put bootloader ... intale RSD lite .. (probe many verifications) then the drivers of motorola (probe many verifications .. even of the original page) .. soique claro .. the bootloader walks. .. the phone normally goes .. but it ran out of system .. when I connect it to PC make noise but the RSD lite does not recognize it (only the PC)
-I have a rom ready .. but if you do not recognize me I can not do anything .... <_ <
MartinTheGamer said:
miren... resulta que mi defy entra en bootloader... si... pero RSD lite no me lo reconoce .. probe de TODO....
desde:
-Cargarlo al 100% con un cargador universal (porque se quedo sin sistema creo... porque no carga normalmente)
-Hacerles WIPES desde el POWER y volumen - (todo tipo)
-intentar abrir TWRP .. ( se apaga instantaneamente ... como si no tuviera carga)
-iniciarlo normalmente.. ( no funciona porque se apaga... creo que se quedo sin sistema porque con cargador normal no carga)
-abrir el segundo arranque (pasa lo mismo que con el TWRP .... se apaga!)
Dato importante:
-Habia instalado android 4.4.4 pero... se habia ***** por haberlo ruteado.. debido a esto intente flashearlo.. cuando me devolvieron mi PC (estaba en arreglo) se quedo sin carga ( tuve que comprar cargador universal) y luego de cargarlo al 100% puse bootloader... intale RSD lite.. (probe muchas verciones) luego los drivers de motorola (probe muchas verciones.. incluso de la pagina original ) .. asique aclaro.. el bootloader anda... el telefono anda normalmente.. pero se quedo sin sistema.. cuando lo conecto a PC hacer ruido pero el RSD lite no lo reconoce (solo el PC)
-tengo una rom lista.. pero si no me lo reconoce no puedo hacer nada ....<_<
EN FIN.... espero su respuesta ... confio en ustedes ... ! SALUDOS
Translation
Look ... it turns out that my defy goes into bootloader ... yes ... but RSD lite does not recognize it ... probe of EVERYTHING ....
since:
- Charge it to 100% with a universal charger (because it ran out of system I think ... because it does not load normally)
- Make them WIPES from the POWER and volume - (all type)
-try to open TWRP .. (shuts off instantly ... as if it had no load)
- start it normally .. (does not work because it goes off ... I think it ran out of system because with normal loader does not load)
-open the second boot (same as with the TWRP .... it goes off!)
Important fact:
-I had installed android 4.4.4 but ... had ***** for having routed it .. because of this I try to flash it .. when they returned my PC (I was in arrangement) I was without load (I had to buy universal charger ) And after loading it to 100% I put bootloader ... intale RSD lite .. (probe many verifications) then the drivers of motorola (probe many verifications .. even of the original page) .. soique claro .. the bootloader walks. .. the phone normally goes .. but it ran out of system .. when I connect it to PC make noise but the RSD lite does not recognize it (only the PC)
-I have a rom ready .. but if you do not recognize me I can not do anything .... <_ <
Click to expand...
Click to collapse
Greetings, ALL posts on xda must be in English. I have translated this one for you but please use google translate for all future posts
Regards
Sawdoctor