Hello guys .. im using huawei y7p week ago ... great phone ... my device is updated to android 10 .... the only problem carrier aggregation is not working ... there is no advanced option in menu to enable CA or inside developer mode ... is this phone support CA or not even the cpu kirin 710f support it
+ is there any code or app the find LTE channel bandwith 10/15/20 mhz from huawei device like samsung service mode ?
thanks to all
i find this option inside shortcut maker
I don't know there is any easy way to check Carrier Aggregation support but i think this device support only Contiguous intra-band CA like most of low-cost Chinese devices. I will try this device to my hand and then we know what combinations this device support.
There is no Service Mode exist in Huawei devices.
olkitu said:
I don't know there is any easy way to check Carrier Aggregation support but i think this device support only Contiguous intra-band CA like most of low-cost Chinese devices. I will try this device to my hand and then we know what combinations this device support.
There is no Service Mode exist in Huawei devices.
Click to expand...
Click to collapse
Thanks man .. my carrier support intra+inter band ... CA option maybe need root to enable ... this is my first huawei phone .. totaly trash .. my a7 2017 support a lot of ca combinations even flashing defferent stuck roms and custom roms ... how to root this phone ?
with CA i got over 130mb in speedtest .. right now 50mb ... i need full speed like other phones
lakhssas said:
Thanks man .. my carrier support intra+inter band ... CA option maybe need root to enable ... this is my first huawei phone .. totaly trash .. my a7 2017 support a lot of ca combinations even flashing defferent stuck roms and custom roms ... how to root this phone ?
Click to expand...
Click to collapse
Yes mostly do inter-band CA... I think you can't get CA enabled with root but you can try. I don't know what CA your Samsung A7 2017 support - if you like you can get log from Samsung so i can list device to my website. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...ions-from-your-android-phone/#Samsung_Devices . Custom roms use same baseband as stock - these files are normally signed so there is no way to modify.
olkitu said:
Yes mostly do inter-band CA... I think you can't get CA enabled with root but you can try. I don't know what CA your Samsung A7 2017 support - if you like you can get log from Samsung so i can list device to my website. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...ions-from-your-android-phone/#Samsung_Devices . Custom roms use same baseband as stock - these files are normally signed so there is no way to modify.
Click to expand...
Click to collapse
My a7 2017 lcd display was broken .. you already have ca combinations of a7 2017 ... its the same of a5 2017 https://cacombos.com/device?model=SM-A520F .. i will sell this device .. that is the great idea ... thanks for time
lakhssas said:
My a7 2017 lcd display was broken .. you already have ca combinations of a7 2017 ... its the same of a5 2017 https://cacombos.com/device?model=SM-A520F .. i will sell this device .. that is the great idea ... thanks for time
Click to expand...
Click to collapse
A7 and A5 are different but both could have same 4G CA support...
olkitu said:
A7 and A5 are different but both could have same 4G CA support...
Click to expand...
Click to collapse
No its the same specs ... check it here
https://www.gsmarena.com/compare.php3?idPhone1=8335&idPhone2=8494
lakhssas said:
No its the same specs ... check it here
https://www.gsmarena.com/compare.php3?idPhone1=8335&idPhone2=8494
Click to expand...
Click to collapse
Even on gsmarea have same specs that doesn't tell both devices modem configuration are same... Could have different supported combinations. But of course we can guess both devices have same combinations configured...
Huawei forum answer me .. the phone not support carrier aggregation .. is this CA merge inside the cpu modem or need extra IC on motherboard to work like wifi ic ... GSMARENA was put fake specs if this phone not support carrier aggregation
They just guessing because there is no public specs about carrier aggregation. That is big problem. That is reason why i have build cacombos.com where i list devices support Carrier Aggregation.
olkitu said:
They just guessing because there is no public specs about carrier aggregation. That is big problem. That is reason why i have build cacombos.com where i list devices support Carrier Aggregation.
Click to expand...
Click to collapse
What you think from your experience .. support or not ?
is this CA merge inside the cpu modem or need extra IC on motherboard to work like wifi ic ?
lakhssas said:
What you think from your experience .. support or not ?
Click to expand...
Click to collapse
My experience low cost Huawei and other Chinese devices (example Xiaomi, Realme) support only Carrier Aggregation Combinations used in China and Contiguous Intra-band CA. But please wait - i will test soon this device when i get so i will update then details.
Example CA i think this support is 1C, 3C, 7C, 38C; 40C, 41C and then 1+3.
olkitu said:
My experience low cost Huawei and other Chinese devices (example Xiaomi, Realme) support only Carrier Aggregation Combinations used in China and Contiguous Intra-band CA. But please wait - i will test soon this device when i get so i will update then details.
Example CA i think this support is 1C, 3C, 7C, 38C; 40C, 41C and then 1+3.
Click to expand...
Click to collapse
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
lakhssas said:
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
Click to expand...
Click to collapse
Yes 3C mean 1800+1800 contiguous intra-band carrier aggregation and yes Redmi Note 8 support that: https://cacombos.com/device?model=M1908C3JG
olkitu said:
Yes 3C mean 1800+1800 contiguous intra-band carrier aggregation and yes Redmi Note 8 support that: https://cacombos.com/device?model=M1908C3JG
Click to expand...
Click to collapse
About redmi note 8 ... gsmarena shows support 4CA .. and the qualcomm Cpu support only 3CA ... Your site shows 2CA intra band ... Whats correct ?
lakhssas said:
About redmi note 8 ... gsmarena shows support 4CA .. and the qualcomm Cpu support only 3CA ... Your site shows 2CA intra band ... Whats correct ?
Click to expand...
Click to collapse
I don't know why it says 4CA in Gsmarea... there is too much wrong details about CA... Yes Qualcomm modem support that but Xiaomi seems haven't implement 3CA feature - i just guess more combinations -> more expensive. It's very common Redmi series support only 2CA because in China CA is much used.
My site data is based of modem logs - if you like you can confirm it in UE Capability Information message. Here is instruction how you could get it from modem: https://mt-tech.fi/en/how-to-get-4g...hone/#Method_for_Qualcomm_Devices_before_2020
lakhssas said:
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
Click to expand...
Click to collapse
Sorry i have to update i will not get this device. And there is no easy method get log from Kirin. I'm very sorry but i can't get you much for this.
Related
For the beginnings of this thread read posts 838-844 here.
alain57 said:
I did the modification on cucuo92 rom
i went back to CM12.1 and noticed that TWRP restaure an NV partition... So i first told TWRP to NOT restaure this partition => phone did not boot
So i had no choice and restaured this partition after all
well I went to a town where there is ONLY LTE 800Mhz, and like I expected did not work :/
So I guess that the NV partition backup in TWRP contains the NV changes :/
Nevertheless, i'll retry this with Cucuo92 rom to be sure that this mod is working on my phone
if it is, i will create a NV backup and try to compare it with the backup I already have (cucuo rom without changes)
and then I'll try to do the exact same difference on the CM12.1 NV backup... maybe this could work
you need to use another tool to do the LTE mod, the window you are showing is the one for UMTS (3G) modification
this window need to stay open, but the LTE mod are done in one other tool
Click to expand...
Click to collapse
So I was reading a little deeper in the thread and a few interesting things came out to me.
CM is known (as of last September) to have added a commit to their code to prevent these changes (my guess is because of their rapid growth and wanting to play with the big manufacturers), so CM12 or CM12.1 may not successfully do this.
It seems that this only works with custom ROM's/kernels that have been compiled from source (meaning Cuoco's ROM is built off of Nubia and they likely are preventing it in the kernel)
It seems the phone has the correct modem to make this happen, but we may also need a custom radio compiled to enable these bands to work - although it seems some people in the other thread have had issues with this. Some say it works and others not so much.
There's more but I don't have time at the moment. I'll try and add more later.
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
This is true, they may not. It was only a presumption on my part. They have been so reluctant (okay, flat out refusing to do so) to release the source code and device tree, it wouldn't surprise me that they have this, I just don't know. Nubia/ZTE really seems like they don't care about anyone outside of China.
LePocketPc said:
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
From what I understand from reading many of the replies in the guide, people have had a hard time making it work with CM. They have to use a different ROM.
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
alain57 said:
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Click to expand...
Click to collapse
LePocketPc said:
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
Click to expand...
Click to collapse
yes as I have currently 4G in roaming on a 2600Mhz antenna
these are the settings i setup (i also wrote the second line just in case, but this didn't help :/)
and like I said, i'm currently in 4G but on a 2600Mhz antenna somewhere else
---------- Post added at 11:19 AM ---------- Previous post was at 10:47 AM ----------
at least i can confirm that disabling a band really disable it
i just setup my phone to ONLY accept band 20, rebooted it and no more 4G at the place I am (with 4G 2600Mhz)
I guess that some manufacturer disable some bands by software (and in this case, this mod works)
and some other may actually have some hardware limitations (maybe the LTE radio can't find signals bellow 1000mhz ?
nevertheless, i will do a last test by activation all 800Mhz bands (and for course the 3 an 7 bands)
so it will be bands :
3 6 7 18 19 20 27
for code i received 68026468
I'll test this this afternoon... and update the post after getting some results
edit : i went eating in the other nearby town (800Mhz) and no 4G
so this modification is useless :/
Okay, so it seems that we've had someone on Cuoco and on Nubia test this out without success. Next we need someone with one of the versions of CM to see if it works. I'm on CM12.1 and would try, but I don't have a PC; only Mac and Linux and I'm not sure how to make this work with either one.
Well for cm12 we first need to find how to enable the dialog USB.
Cm12 only get adb and mtp or USB mass storage
And noe of the service code worked...
alain57 said:
Well for cm12 we first need to find how to enable the dialog USB.
Click to expand...
Click to collapse
You have it explained here - http://forum.xda-developers.com/showpost.php?p=57561965&postcount=1
You may actually control all the possible USB configs in a similar way.
And it works on a fully booted phone, and not when swiched-off.
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Had not seen that specific thread; although, the person who wrote it was a major contributor to the one that had been pointed out earlier. A couple of the people here tried adding band 20 (in France I think) and it didn't work. From what I understand, the qualcomm modem should work without a problem, it's the radio that may be the issue. From what I've read elsewhere, if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Pr3muToS said:
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Pr3muToS said:
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Click to expand...
Click to collapse
Yes, it does, but those bands aren't available in all countries. Those are TDD bands primarily used in Asian countries (thought there are others too).
yes , but you said:
if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Click to expand...
Click to collapse
but the OPO hast 38-41 and the FDD20 didnt work, see my last link
thats y iam asking.... depends on antenna, or software? Because Qualcomm Tool should be able to active FDD 20 on Qualcomm based phones.. but if the antenna doesnt support, this all is useless, thats the question now?? mhm
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
The B20 band is possible or not on Z7 mini ?
I'm sorry but i don't have the capacities to test it.
But actually the procedure for SOC qualcomm don't work for our device ?
Pr3muToS said:
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
Click to expand...
Click to collapse
hello
Hi everyone, I am trying to enable some lte bands.
I can not make service programming to read my phone. is it totally necessary? becasue qspt and qxdm are reading my phone.
I wrote with qxdm 65609 for bands 1, 4 17 (by the way, is this code alright?) but I can not get 4g to work. Any idea?
I am using quoco's rom
Thanks
LTE band 20 800MHz FDD
Hi did anyone successfull add band 20? Is it working? Can someone help me please? btw have cuocos rom
hey guys,
if someone of you ownes a redmi note 3 pro special edition and have root and twrp(alka) installed please contact me!
Thanks
I'm searching too and guess for the same reason (Band 20/28? ).
User wtfjajaja claims that he has a kate but he is not responding to my pm or in his thread :/
Also I found a user on MIUI with a kate but he is not responding either. Maybe I'm not polite enough
crckmc said:
I'm searching too and guess for the same reason (Band 20/28? ).
User wtfjajaja claims that he has a kate but he is not responding to my pm or in his thread :/
Also I found a user on MIUI with a kate but he is not responding either. Maybe I'm not polite enough
Click to expand...
Click to collapse
you are correct! it would be a huge help for us having a willing person with a special edition
Maybe you can PM him too and ask nicely for him to dump his device
His thread is here http://forum.xda-developers.com/redmi-note-3/help/how-to-port-cyagenogenmod-kenzo-to-kate-t3429502
Off topic: what is a "special edition"? I get more confused by so many versions of the same phone
paul_damian said:
Off topic: what is a "special edition"? I get more confused by so many versions of the same phone
Click to expand...
Click to collapse
The special edition recently got released in Taiwan. It is the same AS kenzo but supports more LTE Bands.
paul_damian said:
Off topic: what is a "special edition"? I get more confused by so many versions of the same phone
Click to expand...
Click to collapse
http://mobile.mi.com/tw/note3/#specs
With FDD-LTE B1 / B2 / B3 / B4 / B5 / B7 / B8 / B20 / B28
Nobody haves a Kate
I'm sure there are people (why would they ask about porting kenzo fw to kate if they don't have one) but they are too lazy to help or fear that we could do something with their IMEI and such
edit: maybe we should try to trick people by saying our goal is to port cm to kate device hehehe
follow, soon to be redmi note 3 special edition owner. i would love to find out how to root and install twrp on this device!
Somebody have it in the forum but they say that special edition is 2 mm longer than kenzo. Some phsycal changes might be happen in hardware.
I would like to know this too. If Kate doesn't receive TWRP, I'd choose Kenzo, as it has such strong dev support. I use XMIUI and/or MIUI Tweaks too, and without TWRP and root, I couldn't install them.
It would be nice to have Marshmallow and band 28, but not at the expense of not having TWRP and root.
Just to bring this thread to a close, software-wise Kate is exactly the same as Kenzo apart from it uses a different modem. Now mine has been reflashed it can use all same ROMs as Kenzo etc.
Hi guys I just wanna know how to enable carrier aggregation on this phone. My carrier claims to have Carrier aggregation and yet I don't seem to be connected to any LTE-A or 4G+ connections. Is this phone CA automatic or do I have to do something about it?
Edit:
On the LTE Physical Channel Configuration, it is only just Primary no secondary.
LTE-A/4G+ should activate automatically if network and device support same combinations. I don't know what combinations Oppo A5 support, but we can check it from modem logs.
You can get it easily from your phone. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices . Could you please then send it to https://cacombos.com/contribute so i can analyze log file and then list all supported 4G combinations?
I already have some Oppo devices listed: https://cacombos.com/search?key=Oppo
olkitu said:
LTE-A/4G+ should activate automatically if network and device support same combinations. I don't know what combinations Oppo A5 support, but we can check it from modem logs.
You can get it easily from your phone. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices . Could you please then send it to https://cacombos.com/contribute so i can analyze log file and then list all supported 4G combinations?
I already have some Oppo devices listed: https://cacombos.com/search?key=Oppo
Click to expand...
Click to collapse
Whenever I end a log, the log file has to be sent to oppo or it will be deleted. Is there any other way?
rhyan_red said:
Whenever I end a log, the log file has to be sent to oppo or it will be deleted. Is there any other way?
Click to expand...
Click to collapse
This is strange. I don't have Oppo device so i can't test but i think it will prom't after end log some dialog where you can send log to Oppo or not? When this dialog appear can you copy log to safe location so then phone can't delete log file?
olkitu said:
This is strange. I don't have Oppo device so i can't test but i think it will prom't after end log some dialog where you can send log to Oppo or not? When this dialog appear can you copy log to safe location so then phone can't delete log file?
Click to expand...
Click to collapse
I got the log file now and I've sent it to cacombos contribution.
rhyan_red said:
I got the log file now and I've sent it to cacombos contribution.
Click to expand...
Click to collapse
Thank you for the modem log. I have parsed your log file and it's CAT4 device so it doesn't support Carrier Aggregation. But it support 64QAM UL so little bit better upload speed.
Your device support LTE bands 1,3,5,7,8,20,28,38,40,41
olkitu said:
Thank you for the modem log. I have parsed your log file and it's CAT4 device so it doesn't support Carrier Aggregation. But it support 64QAM UL so little bit better upload speed.
Your device support LTE bands 1,3,5,7,8,20,28,38,40,41
Click to expand...
Click to collapse
Oh it's CAT4? I thought this device is CAT6 cause that was what's written on most specs sites for this device, well they could be just an error. But the SOC seems to be capable of up to CAT12 but it's also not always the SOC right?
rhyan_red said:
Oh it's CAT4? I thought this device is CAT6 cause that was what's written on most specs sites for this device, well they could be just an error. But the SOC seems to be capable of up to CAT12 but it's also not always the SOC right?
Click to expand...
Click to collapse
My mistake I meant X12 LTE Modem not CAT12.
Edit: I just found out X12 LTE Modem is CAT12.
rhyan_red said:
Oh it's CAT4? I thought this device is CAT6 cause that was what's written on most specs sites for this device, well they could be just an error. But the SOC seems to be capable of up to CAT12 but it's also not always the SOC right?
Click to expand...
Click to collapse
X12 modem support CAT12 but there is no Carrier Aggregation combinations defined. Maybe this is due Carrier Policy or something.
Qualcomm website show what chip support but that doesn't mean manufacturer will implement all features. I think these feature cost more money for manufacturer so they will removed these on low cost devices. But there maybe have different variant with Carrier Aggregation Combinations defined. If there is full image available then there theory possible extract some data.
olkitu said:
X12 modem support CAT12 but there is no Carrier Aggregation combinations defined. Maybe this is due Carrier Policy or something.
Qualcomm website show what chip support but that doesn't mean manufacturer will implement all features. I think these feature cost more money for manufacturer so they will removed these on low cost devices. But there maybe have different variant with Carrier Aggregation Combinations defined. If there is full image available then there theory possible extract some data.
Click to expand...
Click to collapse
Well then so Oppo just didn't add support for CA on this device, I guess there's not much I can do about it. Thanks for the help.
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
MAREK10747 said:
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
Click to expand...
Click to collapse
Hi,
I want to take your approach on my Redmi Note 9S. Is there any guide I can take to enable 4G+ carrier aggregation?
iAmWiz said:
Hi,
I want to take your approach on my Redmi Note 9S. Is there any guide I can take to enable 4G+ carrier aggregation?
Click to expand...
Click to collapse
Now you can use my guide for your device and make copy/paste this thread to thread about your device . Guide with know/how don't exist , you need to do all manually.
MAREK10747 said:
Now you can use my guide for your device and make copy/paste this thread to thread about your device . Guide with know/how don't exist , you need to do all manually.
Click to expand...
Click to collapse
thank you. I am giving this a try
iAmWiz said:
thank you. I am giving this a try
Click to expand...
Click to collapse
if it worked please tell us i want to see if carrier aggregation works
MAREK10747 said:
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
Click to expand...
Click to collapse
any mediatek guide?
historys said:
if it worked please tell us i want to see if carrier aggregation works
Click to expand...
Click to collapse
sure! that is my main reason for doing this
historys said:
if it worked please tell us i want to see if carrier aggregation works
Click to expand...
Click to collapse
For some reason, it didn't work even after following so many guides on XDA. This inclusive.
I think there's more to just editing values on QXDM for my device.
iAmWiz said:
For some reason, it didn't work even after following so many guides on XDA. This inclusive.
I think there's more to just editing values on QXDM for my device.
Click to expand...
Click to collapse
Have you looked at this site?
There are some useful guide for sony phones there, might also work elsewhere, or at least help you to understand how it works.
MT-TECH.FI - IT Blogi
Tietotekniikkaan ja tietoverkkoihin keskittyvä blogi.
mt-tech.fi
gingerboy92 said:
Have you looked at this site?
There are some useful guide for sony phones there, might also work elsewhere, or at least help you to understand how it works.
MT-TECH.FI - IT Blogi
Tietotekniikkaan ja tietoverkkoihin keskittyvä blogi.
mt-tech.fi
Click to expand...
Click to collapse
Hi, I have.
I've also made some comments on his sites. I want to try something else now to see if it will work.
iAmWiz said:
Hi, I have.
I've also made some comments on his sites. I want to try something else now to see if it will work.
Click to expand...
Click to collapse
Hope you can share it if you've made any progress. Carrier aggregation is one area not so many people talks about. Would be great to learn more
gingerboy92 said:
Hope you can share it if you've made any progress. Carrier aggregation is one area not so many people talks about. Would be great to learn more
Click to expand...
Click to collapse
surely, I will. thanks
Hello everyone I'm new here. I would like to know if someone's working on a custom rom for this phone. I'm new to MIUI and honestly it sucks and it would be good to know if I'm stuck with it for 2 or so years.
WeR2B4U said:
Hello everyone I'm new here. I would like to know if someone's working on a custom rom for this phone. I'm new to MIUI and honestly it sucks and it would be good to know if I'm stuck with it for 2 or so years.
Click to expand...
Click to collapse
Probably no one. I'm skeptical about a custom rom for Renoir since his production was stopped and will be launched with another chipset.
triovi said:
his production was stopped
Click to expand...
Click to collapse
Stopped? Where does this info come from?
triovi said:
and will be launched with another chipset.
Click to expand...
Click to collapse
What chipset? Mediatek dimensity ?
Since QUALCOMM 780 chipset production stopped . Are rumor's the 2 new MI 11 lite 5G NE will appear with 778G chipset with Mona and Lisa name's.
triovi said:
Since QUALCOMM 780 chipset production stopped . Are rumor's the 2 new MI 11 lite 5G NE will appear with 778G chipset with Mona and Lisa name's.
Click to expand...
Click to collapse
Why they stopped production?
Anyways hopes are not all down as you can flash a GSI (generic system image, searchable on google)
And also, galaxy tab original P7500 also have it's production stopped, and now, it gets android 8.0 unofficially
Well i will call it a mi 11 lite lite 5g as it is slightly tuned down.
But from xiaomi's trend most likely it will be called 'mi 11 lite 5G reloaded'
triovi said:
Probably no one. I'm skeptical about a custom rom for Renoir since his production was stopped and will be launched with another chipset.
Click to expand...
Click to collapse
That's unfortunate :/. Maybe it's possible to use GSI ROM for this phone? And if so are there any drawbacks, I heard GSI's are not the most stable
LR7875 said:
Why they stopped production?
Anyways hopes are not all down as you can flash a GSI (generic system image, searchable on google)
And also, galaxy tab original P7500 also have it's production stopped, and now, it gets android 8.0 unofficially
Click to expand...
Click to collapse
Unofficially to make room for Snapdragon 888 on production lines. Because is used in many phones and is very requested , 780 was used only in Mi 11 lite.
I'm saying that since number of sell Renoir is low, the possibly of a custom developer to have it is low . I hope I'm wrong since i have this phone.
No man, you're right, we'll be stuck in the vacuum.
triovi said:
Unofficially to make room for Snapdragon 888 on production lines. Because is used in many phones and is very requested , 780 was used only in Mi 11 lite.
I'm saying that since number of sell Renoir is low, the possibly of a custom developer to have it is low . I hope I'm wrong since i have this phone.
Click to expand...
Click to collapse
Is there released kernel sources?
If yes then if someone decided hey I want to donate my phone to a dev then we may get custom ROMs. We may also get blind- builded
custom ROMs.
If no sources, we won't get custom ROMs, same as the 20 dollar mediatek cheap phones.
Damnit, I bought this Xiaomi phone in the hope there will be a custom rom. My Redmi 5 got excellent rom support. But reading that sales are low and to make room for other Snapdragon soc's makes me not optimistic.
My Galaxy A50 that I used for 2 years also got no rom support, but that was mainly because the security in Knoxx. I got used to that.
The Lite 11 4G version of this phone have a few custom roms! Why the 5G not?!!
GSI is enough nowadays. I added patch to phh-treble and works good
LR7875 said:
Is there released kernel sources?
If yes then if someone decided hey I want to donate my phone to a dev then we may get custom ROMs. We may also get blind- builded
custom ROMs.
If no sources, we won't get custom ROMs, same as the 20 dollar mediatek cheap phones.
Click to expand...
Click to collapse
The Telegram published an unofficial ROM Arrow (not GSI) https://t.me/XiaomiMi11LiteUpdates/143 . https://t.me/arrowrenoir
Dobrozol said:
The Telegram published an unofficial ROM Arrow (not GSI) https://t.me/XiaomiMi11LiteUpdates/143 . https://t.me/arrowrenoir
Click to expand...
Click to collapse
That's for the 4g version of the phone. It's totally incompatible with the 5g version.
kestrelv2 said:
That's for the 4g version of the phone. It's totally incompatible with the 5g version.
Click to expand...
Click to collapse
No, links in the telegram channel lead exactly to the firmware for renoir
jazzh said:
Stopped? Where does this info come from?
Click to expand...
Click to collapse
Over a month before you asked this many news sites had posted about the chip shortage, why 780G phones are so rare and why manufacturers like Xiaomi are going to circumvent the problem by switching to 778G.
Xiaomi will release the new Mi 11 Lite NE 5G tomorrow, using the 778G produced by TSMC using N6 unlike the 780G which is produced by Samsung using 5LPE.