Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Kenvarus said:
Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Click to expand...
Click to collapse
how did you unlock bootloader and did you ever figure out how to root it? going through same thing now.
Kind of an old thread and old device now, but I own one myself (branded Packard Bell) and just figured this all out, so here goes:
Root
This one is really easy now thanks to a MediaTek flaw. Just go to https://github.com/JunioJsv/mtk-easy-su, download the latest release, install the APK on the device, and run it by opening the app and pressing the button in the lower-right corner (still works on this since the latest security patch level AFAIK is from 2017). Note that this gives root temporarily, so you will need to run it again after reboot if you want root again.
Bootloader Unlock
When Kenvarus said "easiest bootloader on the planet", I took a guess at the method and it worked:
Back up any important data on your tablet, as this will factory reset it.
Install ADB and Fastboot on your computer if they are not installed, including drivers. For Fastboot (as that can be tricky sometimes), it "just worked" for me and I think Windows used an Amazon driver I had installed for my KF2. YMMV.
If you haven't already, enable Development Settings by going to Settings->About tablet and tapping the build number 7 times.
Go to Settings->Developer options (switch them on if they're off) and enable the "OEM unlocking" toggle.
In the same menu, enable "USB debugging" if it is not enabled already.
Connect the tablet to your computer, confirming the authorization prompt that pops up if it wasn't connected before. Check whether the connection is good with the "adb devices" command if needed.
Run the command "adb reboot bootloader", this gave me a blank screen.
Use the "fastboot devices" command to make sure the Fastboot connection works.
Run the command "fastboot oem unlock".
Press Volume Up when the text-mode confirmation screen pops up on the tablet.
Once the unlock procedure is complete, reset the tablet. You should see text on your bootscreen saying "Orange State" and a factory reset on the first reboot if it worked.
WARNING: I highly recommend charging your battery to be at least 10-20% filled before doing this. I stupidly did this at 1% battery thinking "it's plugged in anyway" and had quite the time rebooting after unlocking the bootloader (I thought it was bricked for a good hour or so, only after walking away for 20 minutes to eat dinner did I see that the battery was now at 20% and I could boot the tablet).
After unlocking the bootloader and temp-rooting it with the above app, I was able to use Magisk to patch the boot image (using dd to shuttle the files to and from /dev/block/mmcblk0p10, use "strings saved_boot_partition_name|head -n1" and check for "ANDROID!" to make sure it's the right partition) and I now have persistent root after all these years (note that Direct Install in Magisk doesn't work here). I'd definitely be interested in a custom recovery and/or ROMs for this device, but I'm not holding my breath (I'd take a crack at it if I knew better how to do it, but I have near-zero experience with ROM development and so far have only recompiled existing ROMs for a few phones).
As the 22nd is the last day to unlock the bootloader I wanted to unlock mine but all the guides seem to be for honour 9 lite and not the normal one.
Any guides people could please link. Thanks
TurtleSandals said:
As the 22nd is the last day to unlock the bootloader I wanted to unlock mine but all the guides seem to be for honour 9 lite and not the normal one.
Any guides people could please link. Thanks
Click to expand...
Click to collapse
For honor 9 you have 60 more days to unlock bootloader.
22th is for the newest devices.
TurtleSandals said:
As the 22nd is the last day to unlock the bootloader I wanted to unlock mine but all the guides seem to be for honour 9 lite and not the normal one.
Any guides people could please link. Thanks
Click to expand...
Click to collapse
1. go to https://emui.huawei.com/ and log in with your HUAWEI ID
2. go to UNLOCK page and get your unlock key.
3. In settings of your phone search for HDB and enable that option.
4. go to settings > system > about phone and click few times on compilation number to enable programmer settings.
5. go back to settings > system > programmer settings and enable USB debugging and unlock OEM
6. download HiSuite, connect your phone and make Backup of everything that you need (unlocking bootloader wipes everything on your internal storage)
7. If you cant connect your device, try to do this https://ph.answers.acer.com/app/ans...windows-10:-disable-signed-driver-enforcement
8. download this zip and extract on your desktop. https://drive.google.com/open?id=1A0z2K1BjTzntPJe-1CqqUYv-NnXWi5vD
9. inside the folder hold SHIFT and press right click and click open power shell here.
10. type .\adb devices
11. type .\adb reboot bootloader
12. type .\fastboot oem unlock [your unlock key]
13. Press volume + on your phone to select YES and than power button to confirm.
14. Now your bootloader is unlocked and your phone will do the factory reset. Enjoy.
Pomaraczowy said:
For honor 9 you have 60 more days to unlock bootloader.
22th is for the newest devices.
Click to expand...
Click to collapse
Nah bruh, I think you messed up. 22 marked the 60th day that bootloader codes would be given. I'm having major trouble to get my code. I think I'm going to give a shot to HCU-Client or DC unlocker. The only thing that sucks is that it is a paid service. And it seems sketchy as hell. Anyways maybe I'll inform the forums If I succeed. But to recap, Huawei isn't going to provide you a code as it seems. Maybe they'll start again. I heard XDA is in the talks with Huawei to persuade them to restart the procedure.
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Waited 4 yrs to upgrade from a OnePlus5 and these Chinese system apps are such a downer. Glad to see you two on to the right questions.
tigerfelix said:
... The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
remind me of the steps?
tigerfelix said:
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
I'm facing the same issue. Have activated USB debugging on my X3 Pro, but when I shut down and restart whilst also holding volume up button, it doesn't go in to fast boot. Is there a way of activating fast boot by plugging phone into computer?
p1gnone said:
remind me of the steps?
Click to expand...
Click to collapse
The steps to enable developer mode? Go to About Phone, there you will see a screen with lots of info about the phone, including the OS. Tap on *Baseband & kernel", then you see three infos. There you click multiple times on "Build number", which will unlock developer mode. This you then find under "Additional settings" in the main settings. Then you can enable "OEM unlock" (which doesn't help unless you can access the bootloader and actually unlock it...) and "USB debugging". I'll survive without root for now, hoping some clever XDA devs will figure this device out eventually. It's an amazing phone, and I hope they will release a true international version of the firmware at some point, so I won't see the Chinese core-apps anymore...
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
gaztom78 said:
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
Click to expand...
Click to collapse
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
tigerfelix said:
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
Click to expand...
Click to collapse
Deeptest. Apk or in depth test.apk Google them a new version 1.1 was released three days ago but no info on what model phone it is for
Thanks for the tip. Among other things, I came across this:
OPPO Community
Talk, share, and learn everything about the beautiful possibilities of technology together with other OPPO fans.
community.coloros.com
Sounds like this is for devs only, and not yet for the FX3. So for now, I'll keep my hands off it - don't think I'm at the required skill level yet. But still - a good tip, and it gives me some hope that root access might be possible in the near future.
I have what I'm pretty sure is the global variant and I am able to enter fastbootd
Oh wow. Great! May I ask you to please share how you manged to pull that off? And once you accessed fastboot, did you e.g. manage to root the device? Please, also here, a "how" would be preferred over a "yes"?
Or is there a way to root the phone with apps like KingoRoot etc?
I'm not pro in this area, but i find this:
Spoiler: link
How To Unlock OPPO Find X3 Pro Bootloader - NaldoTech
Follow this guide to learn how to unlock the bootloader on your OPPO Find X3 Pro. Most modern Android phones come with locked bootloaders, which make it
www.naldotech.com
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Speaka said:
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Click to expand...
Click to collapse
So buy oneplus or xiaomi. Dont buy oppo.
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高，不那么友好，本教程为ROM乐园首发，其他网站禁止私自转载发布
www.romleyuan.com
georgiy8428 said:
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高，不那么友好，本教程为ROM乐园首发，其他网站禁止私自转载发布
www.romleyuan.com
Click to expand...
Click to collapse
This is what this website tells you when trying to download the app you listed:
1. This service is a one-time payment, the order can be displayed in the personal center after purchase, and it can be used unlimitedly within the validity period
2. The phone comes with a BootLoader model at the factory, please unlock the BL by yourself in advance, and then make a paid purchase
3. The flashing package information belongs to the payment for flashing the data, and not for other services such as paid assistance. Please be aware
4. Relevant introductions and pictures are for reference only, different models may have differences, the address will be automatically obtained after purchase 5. For problems such as resource failure or error, you can contact online customer service QQ or WeChat in the personal center after successful purchase
You have to unlock your bootloader before you can use this app, that is supposed to unlock the bootloader.....
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Update:
Not china version findx3 please use OplusDowngradeTool to download the downgrade rom.
https://561234.xyz/d/设备/Find X3/C11降级包/OplusDowngradeTool.zip
This tool maybe chinese only, there is a video for how to use it:
https://561234.xyz/设备/Find X3/C11降级包/OplusDowngradeTool-OperationDemo.mp4
exg0zz said:
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Click to expand...
Click to collapse
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
georgiy8428 said:
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
Click to expand...
Click to collapse
Currently there's no method to unlock oppo phone on android 12.
Hello everyone!
I recently had the pleasure(pain) of flashing my Ace Pro and I wanted to share the steps I took in doing so. This post will act a as guide/discussion area regarding flashing the Ace Pro(Chinese Release) into the OnePlus 10T 5G(Global Release).
Henceforth, I will refer to the OnePlus Ace Pro as Ace Pro, and the OnePlus 10T 5G as 10T.
A little bit of backstory:
I currently live in China and have no way of purchasing a device overseas and having it shipped in. Instead, I did a little bit of research and decided to purchase an Ace Pro and have a go at flashing it myself. As far as I can tell, the Ace Pro and 10T are identical hardware-wise and flashing between the 2 different market varients can be done with a little bit of effort and headache.
Before we go any further, let me link some useful articles and resources I've found along the way in order to successfully flash your own Ace Pro:
Fastboot Enhance, a powerful tool that will allow you to flash your device with your desired OS
ADB Platform Tools, a tool used to unlock your bootloader
OnePlus USB Drivers, an USB driver used to allow for your phone to communicate with your computer seamlessly(Even though not officially supported, the Ace Pro and 10T work with the 1.0 Release of the USB Drivers)
2415_11_C.22 Update, a stable release of Oxygen 13 that I personally recommend to be flashed on your 10T
Daxiaamu Tools and ROMs, a Chinese enthusiast that has developed his own tools to aid in unlocking, flashing and relocking of devices.
Disclaimer: I am not responsible for any damage that you may inflict upon your own device, proceed with caution and at your own risk! Back up all data before proceeding!!
We begin our journey by first unlocking the Ace Pro's bootloader, unlocking the bootloader is an essential step in flashing your device.
To do this, we need to first enable Developer Tools by going into: Settings > About Device > Version > And tapping the Build Number box until you have become a developer.
After this, navigate to Developer Options. If you cannot find this option, I recommend using the search bar at the top of the settings menu to find this option. Once you're in this menu, enable OEM Unlocking and USB Debugging. This allows for our computer to communicate with our Ace Pro.
Here I recommend installing your Oneplus USB Driver. This will allow your phone to communicate with your PC for the upcoming step.
After installing the drivers, plug your phone into your computer using either the USB cable that came in the box, or a reliable cable that you know will carry data.
Press on Transfer Files/Android Auto when prompted.
Allow for debugging on your device after plugging it into your computer with the prompt that shows up.
Once you are sure that both OEM Unlocking and USB debugging have been enabled, run your ADB Platform Tools by performing the following steps:
Unzip your ADB Platform Tools and have it placed in a memorable place(preferably the desktop)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Holding Shift + Right Click in an empty space brings up this option menu. Click on Open PowerShell window here.
This brings up a Windows Powershell terminal that allows you to enter commands that will directly affect your Ace Pro.
Run the command
Code:
adb devices
This show bring up an entry with a mess of both numbers and characters. This shows you that both your computer and ADB tool recognizes your device and you can move forward.
Now we want to put the device into the bootloader by using:
Code:
adb reboot booloader
This will now run on your device putting it into the bootloader state.
Note: DO NOT UNPLUG YOUR DEVICE IN THIS STATE
After making sure that your device is in the bootloader, run the command:
Code:
fastboot flashing unlock
You will be presented with a prompt asking you if you are sure that you want to unlock your bootloader. Using the volume rocker as a selector and the power button as a confirmation button, highlight the UNLOCK THE BOOTLOADER option using the volume rocker and confirm it by pressing the power button.
Your Ace Pro's bootloader is now unlocked.
NOTE: YOUR DEVICE WILL BE FORMATTED ONCE YOU UNLOCK THE BOOTLOADER! ALL EXISTING DATA WILL BE LOST!
Once unlocking your bootloader, your phone will enter 'Orange State' where it lets you know that your device is untrusted due to its unlocked nature. Do not be alarmed by this.
Proceed by setting your phone up as normal and repeat the earlier step where you become a developer and enable USB Debugging.
This time, OEM unlocking will be enabled by default, this is due to the nature of your device being unlocked.
We now want to put our device into fastboot mode by using ADB. In the Powershell window, type:
Code:
adb reboot fastboot
This will once again change the state of your phone and put it in fastboot mode where 3 language options are available. Do not configure your phone in this state, we will come back to it later.
Now, run Fastboot Enhance as an administrator on your PC. The window should open up and you should be able to see your device with the device name being labeled as 'fastboot'.
Double click this option and another Window should show up.
Make sure that the status of the device is as follows:
Secure Boot: Disabled
Seamless Update: Yes
Current Slot: a
In Fastbootd: Yes
System Update Status: None
Once in this state, we want to click on the partitions tab above and search for 'cow' in the search bar. Results will pop up if you have used/updated your device in ColorOS. You want to highlight these results and press delete on the right hand side. Having them remain in your device will have the possibility of bricking your device when flashing the new OxygenOS ROM.
Once done deleting, return to the Basic Properties tab and press Flash Payload.bin. This will open a browser in where you need to find the zip file containing the ROM that you want to flash.
Find your payload.bin file and open.
Your device will now begin to flash, it took me around 10 minutes before the device was done flashing.
Once flashed, go to your phone and select your language of choice. For most of us, it will be English. This option can be selected like earlier, using the volume rocker as a selector and the power button as a confirmation switch.
Select the option to format your phone once again. Enter the pass code that is present on the screen and confirm the formatting procedure.
The device should still be in Orange State since we have not relocked our bootloader, instead we will now see the OxygenOS boot animation before proceeding to set up our device.
From this point onward, your device is now flashed with OxygenOS.
If you would like to relock your bootloader, read on.
The benefits of relocking your bootloader is that you will be able to receive OxygenOS updates as normal and be able to use NFC functions such as Google Wallet.
Once again, enable developer options and make sure that both OEM Unlocking and USB Debugging is enabled.
Open the ADB Powershell window mentioned before and make sure that your device is still recognized by using the command:
Code:
adb devices
Once your device shows up, put it back into the bootloader state by using the command:
Code:
adb reboot bootloader
Your phone will now enter the bootloader state once again.
We can now relock our bootloader by using the command:
Code:
fastboot flashing lock
This will prompt you to use your volume rocker and power button one more time. Select the option LOCK THE BOOTLOADER and press the power button to confirm. Your device will now format for the last time and load you into OxygenOS 13.
Note: I personally had an issue where after flashing and relocking the bootloader, my phone decided to bootloop(device stuck at OnePlus logo and keeps on turning on and off again), I solved this by holding the volume down and power button and setting it to restart. After loading into the operating system, I updated my device by using OTA updates and installing C4515_11_C.23. This allowed for my device to install the latest update and it seemed to have fixed the bootlooping problem for me.
Another method to fix the bootlooping issue after flashing your phone if you already have the latest update installed is to enable developer options after flashing and applying the same update using the local update feature.
To do this, enable developer options first, the instructions to do that were described earlier in this guide. Transfer the .bin file by drag and dropping your .bin file to a location on the device that you are familiar with. (Placing the .bin file in the downloads folder is a foolproof method)
From there onwards, you want to go into Settings > About Device > Tap on the blue OxygenOS banner > 3 dots menu in the top right corner > Local Install > Select your .bin file you used to flash the device with earlier. Your device should then update with said .bin file and the bootlooping issue should be solved.
Credit to thegreatn_ for this discovery.
Edit: Some of you may experience that your OEM unlocking is still enabled even after flashing your device and relocking your booloader. Remember earlier when your bootloader was in an unlocked state, the OEM unlocking option would be on by default and greyed out so that you could not turn it off which may present a security risk.
Rest assured that you can turn off OEM unlocking once your device has been relocked and everything will function as intended. YOUR DEVICE SHOULD NOT BE ROOTED IF YOU INTEND TO TURN THIS OFF! ONLY DO THIS WITH THE OFFICIAL FIRMWARE INSTALLED! Not having the official firmware installed and turning off OEM unlocking can brick your device!
Credit to Adly1991 for this information.
Please let me know if there's any questions you'd like to ask. This is my first time flashing and it may seem daunting at first, but I believe with a little bit of confidence, you too will be able to successfully flash your Ace Pro.
Good luck!
I'm 8T user , but thanks for sharing your experience and the information.
Abdo Ismail said:
I'm 8T user , but thanks for sharing your experience and the information.
Click to expand...
Click to collapse
It was really hard for me to find a place where I could get all the information I needed about flashing my phone as a noob. If this post helps even just a single person I'd be over the moon. Thanks for the feedback!
Thanks so much. Followed the instructions and worked perfectly!
breadsnack said:
Hello everyone!
I recently had the pleasure(pain) of flashing my Ace Pro and I wanted to share the steps I took in doing so. This post will act a as guide/discussion area regarding flashing the Ace Pro(Chinese Release) into the OnePlus 10T 5G(Global Release).
Henceforth, I will refer to the OnePlus Ace Pro as Ace Pro, and the OnePlus 10T 5G as 10T.
A little bit of backstory:
I currently live in China and have no way of purchasing a device overseas and having it shipped in. Instead, I did a little bit of research and decided to purchase an Ace Pro and have a go at flashing it myself. As far as I can tell, the Ace Pro and 10T are identical hardware-wise and flashing between the 2 different market varients can be done with a little bit of effort and headache.
Before we go any further, let me link some useful articles and resources I've found along the way in order to successfully flash your own Ace Pro:
Fastboot Enhance, a powerful tool that will allow you to flash your device with your desired OS
ADB Platform Tools, a tool used to unlock your bootloader
OnePlus USB Drivers, an USB driver used to allow for your phone to communicate with your computer seamlessly(Even though not officially supported, the Ace Pro and 10T work with the 1.0 Release of the USB Drivers)
2415_11_C.22 Update, a stable release of Oxygen 13 that I personally recommend to be flashed on your 10T
Daxiaamu Tools and ROMs, a Chinese enthusiast that has developed his own tools to aid in unlocking, flashing and relocking of devices.
Disclaimer: I am not responsible for any damage that you may inflict upon your own device, proceed with caution and at your own risk! Back up all data before proceeding!!
We begin our journey by first unlocking the Ace Pro's bootloader, unlocking the bootloader is an essential step in flashing your device.
To do this, we need to first enable Developer Tools by going into: Settings > About Device > Version > And tapping the Build Number box until you have become a developer.
After this, navigate to Developer Options. If you cannot find this option, I recommend using the search bar at the top of the settings menu to find this option. Once you're in this menu, enable OEM Unlocking and USB Debugging. This allows for our computer to communicate with our Ace Pro.
Here I recommend installing your Oneplus USB Driver. This will allow your phone to communicate with your PC for the upcoming step.
After installing the drivers, plug your phone into your computer using either the USB cable that came in the box, or a reliable cable that you know will carry data.
Press on Transfer Files/Android Auto when prompted.
Allow for debugging on your device after plugging it into your computer with the prompt that shows up.
Once you are sure that both OEM Unlocking and USB debugging have been enabled, run your ADB Platform Tools by performing the following steps:
Unzip your ADB Platform Tools and have it placed in a memorable place(preferably the desktop)
View attachment 5844957
Holding Shift + Right Click in an empty space brings up this option menu. Click on Open PowerShell window here.
This brings up a Windows Powershell terminal that allows you to enter commands that will directly affect your Ace Pro.
Run the command
Code:
adb devices
This show bring up an entry with a mess of both numbers and characters. This shows you that both your computer and ADB tool recognizes your device and you can move forward.
Now we want to put the device into the bootloader by using:
Code:
adb reboot booloader
This will now run on your device putting it into the bootloader state.
Note: DO NOT UNPLUG YOUR DEVICE IN THIS STATE
After making sure that your device is in the bootloader, run the command:
Code:
fastboot flashing unlock
You will be presented with a prompt asking you if you are sure that you want to unlock your bootloader. Using the volume rocker as a selector and the power button as a confirmation button, highlight the UNLOCK THE BOOTLOADER option using the volume rocker and confirm it by pressing the power button.
Your Ace Pro's bootloader is now unlocked.
NOTE: YOUR DEVICE WILL BE FORMATTED ONCE YOU UNLOCK THE BOOTLOADER! ALL EXISTING DATA WILL BE LOST!
Once unlocking your bootloader, your phone will enter 'Orange State' where it lets you know that your device is untrusted due to its unlocked nature. Do not be alarmed by this.
Proceed by setting your phone up as normal and repeat the earlier step where you become a developer and enable USB Debugging.
This time, OEM unlocking will be enabled by default, this is due to the nature of your device being unlocked.
We now want to put our device into fastboot mode by using ADB. In the Powershell window, type:
Code:
adb reboot fastboot
This will once again change the state of your phone and put it in fastboot mode where 3 language options are available. Do not configure your phone in this state, we will come back to it later.
Now, run Fastboot Enhance as an administrator on your PC. The window should open up and you should be able to see your device with the device name being labeled as 'fastboot'.
Double click this option and another Window should show up.
Make sure that the status of the device is as follows:
Secure Boot: Disabled
Seamless Update: Yes
Current Slot: a
In Fastbootd: Yes
System Update Status: None
Once in this state, we want to click on the partitions tab above and search for 'cow' in the search bar. Results will pop up if you have used/updated your device in ColorOS. You want to highlight these results and press delete on the right hand side. Having them remain in your device will have the possibility of bricking your device when flashing the new OxygenOS ROM.
Once done deleting, return to the Basic Properties tab and press Flash Payload.bin. This will open a browser in where you need to find the zip file containing the ROM that you want to flash.
Find your payload.bin file and open.
Your device will now begin to flash, it took me around 10 minutes before the device was done flashing.
Once flashed, go to your phone and select your language of choice. For most of us, it will be English. This option can be selected like earlier, using the volume rocker as a selector and the power button as a confirmation switch.
Select the option to format your phone once again. Enter the pass code that is present on the screen and confirm the formatting procedure.
The device should still be in Orange State since we have not relocked our bootloader, instead we will now see the OxygenOS boot animation before proceeding to set up our device.
From this point onward, your device is now flashed with OxygenOS.
If you would like to relock your bootloader, read on.
The benefits of relocking your bootloader is that you will be able to receive OxygenOS updates as normal and be able to use NFC functions such as Google Wallet.
مرة أخرى ، قم بتمكين خيارات المطور وتأكد من تمكين كل من إلغاء تأمين OEM وتصحيح أخطاء USB.
افتح نافذة ADB Powershell المذكورة من قبل وتأكد من أنه لا يزال يتم التعرف على جهازك باستخدام الأمر:
Code:
أجهزة adb [/ CODE]
بمجرد ظهور جهازك ، أعده إلى حالة أداة تحميل التشغيل باستخدام الأمر:
[كود] adb reboot bootloader [/ CODE]
سيدخل هاتفك الآن في حالة أداة تحميل التشغيل مرة أخرى.
يمكننا الآن إعادة توصيل محمل الإقلاع الخاص بنا باستخدام الأمر:
[كود] قفل وميض fastboot [/ CODE]
سيطالبك هذا باستخدام زر التحكم في الصوت وزر الطاقة مرة أخرى. حدد الخيار LOCK THE BOOTLOADER واضغط على زر الطاقة للتأكيد. سيتم الآن تنسيق جهازك لآخر مرة وتحميلك إلى OxygenOS 13.
ملاحظة: لقد واجهت شخصيًا مشكلة حيث بعد وميض أداة تحميل التشغيل ، قرر هاتفي تشغيل bootloop (الجهاز عالق على شعار OnePlus ويستمر في التشغيل وإيقاف التشغيل مرة أخرى) ، لقد قمت بحل هذه المشكلة عن طريق الضغط على زر خفض الصوت وزر الطاقة وتعيينه لإعادة التشغيل. بعد التحميل في نظام التشغيل ، قمت بتحديث جهازي باستخدام تحديثات OTA وتثبيت C4515_11_C.23. سمح ذلك لجهازي بتثبيت آخر تحديث ويبدو أنه قد أصلح مشكلة bootlooping بالنسبة لي.
يُرجى إعلامي إذا كان هناك أي أسئلة تود طرحها. هذه هي المرة الأولى التي تومض فيها وقد يبدو الأمر شاقًا في البداية ، لكنني أعتقد بقليل من الثقة ، أنك أيضًا ستكون قادرًا على وميض Ace Pro بنجاح.
حظ سعيد!
[/QUOTE]
أ Do you provide phone costum recovery Oneplus 10T
Click to expand...
Click to collapse
Hello, Im facing this issue when tried to unlock.
The code fastboot flashing unlock not be proceeded but show the whole line with options as below image.
Could you please help !!1
thk202 said:
Hello, Im facing this issue when tried to unlock.
The code fastboot flashing unlock not be proceeded but show the whole line with options as below image.
Could you please help !!1
View attachment 5856125
Click to expand...
Click to collapse
Hey there, I'm not 100% sure on how to solve this issue but I'll try my best.
First of all, please ensure that your phone is plugged into your computer at all times.
Make sure that your cable supports data transfer and try other cables and see if this problem persists.
The fact that ADB is recognizing your device tells me that your cable is probably not to blame.
Make sure that your phone is on beforehand and that USB debugging and OEM Unlocking are both enabled in the developer settings.
You have to also make sure to select allow on your phone when it asks whether the connected computer is allowed to debug your phone. This is important since it allows your computer to run commands on your phone itself.
Does your phone go into the fastboot screen when you run the adb reboot bootloader command?
Let me know so I can narrow your problems down further and solve the issue!
@thk202 I'm not a vendor of any type. This was just my personal experiences. Can you describe what's gone wrong?
thank you, i finally did it following your steps .. and i think recommendation of 2415 version solved my problem and also instantly got C.26 update through OTA
since i tried 2413 before and alwayes got modem issue.
Adly1991 said:
thank you, i finally did it following your steps .. and i think recommendation of 2415 version solved my problem and also instantly got C.26 update through OTA
since i tried 2413 before and alwayes got modem issue.
Click to expand...
Click to collapse
I remember reading somewhere that 2413 gets updates quicker than 2415 for some reason. But I for one was used to the slow update schedule from Samsung for years so it never affected me. 2415 C22 was a stable OxygenOS 13 release that allowed for OTA to C26 to fix any sort booting issues after relocking your bootloader. I remember relocking my bootloader and having it go into a constant bootloop/soft brick after the C22 flash but after OTA to C26, the bootlooping fixed itself and everything was stable again.
breadsnack said:
I remember reading somewhere that 2413 gets updates quicker than 2415 for some reason. But I for one was used to the slow update schedule from Samsung for years so it never affected me. 2415 C22 was a stable OxygenOS 13 release that allowed for OTA to C26 to fix any sort booting issues after relocking your bootloader. I remember relocking my bootloader and having it go into a constant bootloop/soft brick after the C22 flash but after OTA to C26, the bootlooping fixed itself and everything was stable again.
Click to expand...
Click to collapse
shall i disable OEM option in developer option after relock .. already locked the device but i am afraid to disable OEM option since a read somewhere that it bricked someone device ..
Adly1991 said:
shall i disable OEM option in developer option after relock .. already locked the device but i am afraid to disable OEM option since a read somewhere that it bricked someone device ..
Click to expand...
Click to collapse
Erm I've actually got no clue, I know for a fact that if your bootloader is unlocked, OEM unlocking is on by default and greyed out so you cannot turn it off while the bootloader is in it's unlocked state. I did re-enable developer options after locking my phone again and OEM unlocking was turned off by default. This hasn't bricked my phone and I'm assuming that if it had the potential chance to, OnePlus would have greyed it out. See below:
How I fixed my "bootloop" problem:
I flashed C.26 through Fastbootd and wiped data, and... bootloop!
Looks like device is trying to access wrong slot A or B and unable to.
You need to hold power button + volume up, it should reboot normally. It's a temporary solution, you will face it again after another reboot.
Then you need to transfer the same zip you used to flash into root directory of the phone (where all the folders are living). Go to settings -> About device -> Status -> Tap 7 times on build number to unlock local update feature.
Next, tap on big OxygenOS banner -> Three-dots menu at the top right -> Local install. After, select the zip file you previously copied. Confirm and wait for phone to update itself.
Update will be installed and bootloop issue should be fixed.
breadsnack said:
Erm I've actually got no clue, I know for a fact that if your bootloader is unlocked, OEM unlocking is on by default and greyed out so you cannot turn it off while the bootloader is in it's unlocked state. I did re-enable developer options after locking my phone again and OEM unlocking was turned off by default. This hasn't bricked my phone and I'm assuming that if it had the potential chance to, OnePlus would have greyed it out. See below:
View attachment 5859683
Click to expand...
Click to collapse
for my case OEM did not turn off by default, however, i did it and there is no issues .. thanks
thegreatn_ said:
How I fixed my "bootloop" problem:
I flashed C.26 through Fastbootd and wiped data, and... bootloop!
Looks like device is trying to access wrong slot A or B and unable to.
You need to hold power button + volume up, it should reboot normally. It's a temporary solution, you will face it again after another reboot.
Then you need to transfer the same zip you used to flash into root directory of the phone (where all the folders are living). Go to settings -> About device -> Status -> Tap 7 times on build number to unlock local update feature.
Next, tap on big OxygenOS banner -> Three-dots menu at the top right -> Local install. After, select the zip file you previously copied. Confirm and wait for phone to update itself.
Update will be installed and bootloop issue should be fixed.
Click to expand...
Click to collapse
This is another method of solving the bootlooping issue. I'm assuming that the device just automatically unscrews itself when it receives an update through within the OS. The bootlooping issue is probably because its trying to find a bootable OS through both slot A and B until it manages to fix itself. I personally just flashed C22 and updated to C26 and it had the same effect as flashing C26 and flashing C26 again in local updates.
Thanks for the info! I'll append it to the guide in a bit...
Adly1991 said:
for my case OEM did not turn off by default, however, i did it and there is no issues .. thanks
Click to expand...
Click to collapse
Sweet, will append this information to the guide!
breadsnack said:
This is another method of solving the bootlooping issue. I'm assuming that the device just automatically unscrews itself when it receives an update through within the OS. The bootlooping issue is probably because its trying to find a bootable OS through both slot A and B until it manages to fix itself. I personally just flashed C22 and updated to C26 and it had the same effect as flashing C26 and flashing C26 again in local updates.
Thanks for the info! I'll append it to the guide in a bit...
Click to expand...
Click to collapse
I'd like to point out that there is no need to unpack the zip file, Updater will do everything automatically.
This is to inform that i got update c.26 and c.27 through OTA with no issue ..
Wonderful lemme know if you run into any more issues and I'll be glad to help
Adly1991 said:
This is to inform that i got update c.26 and c.27 through OTA with no issue ..
View attachment 5882617
Click to expand...
Click to collapse
thk202 said:
Hello, Im facing this issue when tried to unlock.
The code fastboot flashing unlock not be proceeded but show the whole line with options as below image.
Could you please help !!1
View attachment 5856125
Click to expand...
Click to collapse
how you fixed this issue ? i got same problem .