Verge Brightness sensor and Iphone connection - Amazfit

Hello everybody!
My friend just bought Amazfit Verge, looks decent, overall good quality / price ratio.
I was looking some review where the hand was used to cover the display to turn it off. Is it possible? It is not working and can not find anything in settings?
Second problem is connection with Iphone 6s. It is very unstable, watch is loosing connection and does not sync with phone often even both Bluetooth connections (one for the phone function and one for the sync I suppose?) are connected.
Anyone with the same problem?

Related

[Q] can I connect a smart watch and Beats 2 Wireless at the same time?

I got a new smart watch this week, the U Watch Ux. Great little watch and way cheaper than the brand name ones. I specifically bought it for the gym because it has a heart rate monitor (I have a bad heart). I also have a pair of Beats 2 Bluetooth headphones for the gym as well. The first time I tried to use my headphones while the watch was connected, the headphones wouldn't work. When I go into Bluetooth settings and tell it to connect to my headphones, it disconnects my smart watch and disconnects the software on my phone. I'm trying to find out if there is a way that I can have both connected to my phone at the same time.

Z5 Compact Blueooth disconnection

Hi all,
i use my Z5 Compact for tracking my run with an Android Wear device (LG G Watch R)
I have several problems with Bluetooth. It works for some secs, then crash. After a min re-start works and reconnect....and so on..
When i use a cardio strip also the hr disconnects.
This is a video of the problem:
youtube. com/watch?v=YgA45nP8Nk4
Can you help me? I'v yet Hard reset it 3 times.
Thanks to all
I cannot offer help unfortunately but I am seeing similar things. And I am starting to think (hope, even) it is software.
My Jawbone UP3 disconnects continually and getting a reconnection is very hard, often involving a band reboot. I also have 4 TrackR tags which are randomly but frequently showing a re-paired message (smart lock device) in the status bar for no reason at all.
I've a Pebble Time but that has not been connected too much and seems ok, equally my Jawbone Jambox and MDR-XB950BT Sony headphones have been working without issue.
Possibly then it is only Bluetooth LE that is an issue (your fitness tracker would be that) and the three working devices are regular BT connections.
With luck this is something then that a firmware update will address. I hope so, because I'm bloody sick of buying broken hardware.
I use Bluetooth at various times throughout the day. I've never had a single problem with it! I am communicating with cars and obd2 systems though not low powered items like watches and headphones. Fwiw I'm on .152 firmware.
I am having massive Bluetooth Low Energy issues, I came to post about it but will do so here.
I have the E5823 unlocked in White. Android 6.0 although this started with 5.1. 32.1.A.1.163.
Basically I am concluding BLE is totally screwed on this phone, and I was about to send it back but realise the number of other BT issues people are having means it is likely not hardware on this one unit so perhaps software resolvable.
Jawbone UP3 loses connection continually, it occasionally connects and syncs, but I cannot force this.
TrackR Bravo tags work on occasion, frequently disconnected and randomly 're-pair' to the phone with no interaction (new BT device notification all the time)
Tile same thing.
Parrot Minidrone cannot be seen by the phone most of the time, it works on occasion.
All these devices are Bluetooth Low Energy. On the other side I have a Jawbone Jambox, Sony MDR-XB950BT headphones and Onkyo-NR626 Amplifier with regular old Bluetooth and all of these work, A2DP, atpX.
The only difference I noticed with 6.0 vs 5.1 is that TrackR can now tell the range by signal strength, something that always worked on the LG G4 Android 5.1 and 6.0. So I think the z5c started with issues and has not exactly improved.
Saying this there are known bugs in Android 6.0 and BLE, solved in 6.0.1. But right now I am super angry that yet another phone I buy is broken out the box. It never ends.
had BT issues, using a smartwatch (LG W100 G Watch).. but it was more frequent when used in combo with other accessories.
updating and restoring to MM 6.0 solved any issue.. so i managed to get well working, at the same time, smartwatch, cardio band, earphones and cadence/speed sensor (for bike).. all using BT LE..
before restoring and updating i got disconnections and glitchy music

Flaky Bluetooth not auto connecting to car

Hi folks,
I've seen a few comments on bluetooth on this phone but not this specific one. I have a Kia Optima with bluetooth and when I get in the car I expect my M20P to auto connect to the head unit. It seems very temperamental though, often not connecting at all. Other times it will connect and then randomly drop connection and reconnect. Has anyone else had this or know what might be causing it?
I'm currently testing if it only connects when I wake / screen on / unlock the device which it seemed to do on my commute this morning, but then a second time it still didn't connect doing the same thing.
I'm also checking with Kia if there is a software update for the head unit but i'm expecting them to blame the phone and Huawei to blame the head unit.
Any help appreciated.
Hi, I am experiencing something very similar. Very bad audio quality during calls, and temperamental connections with Bluetooth - disconnecting and re-connecting.
I haven't been able to find any solution, hoping to awaken this forum.
Same issue here - On 9.0.0.187
Volkswagen Golf 7 2016
Voice sounds like its lagging and like metallic treble
Also i notice with Spotify will streaming music that the display unit is out of sync with what i am listening
It shows the title of the previous song that i have listen not the current one
Did you ever figure this out?
My girlfriend just reported to me that her new 6T is not automatically connecting to her car like her old Android did. It's paired, but she gas to manually connect.
I have audio speeding up and slowing down on my Skoda Citigo bluetooth with Mate 20 Pro, its slightly better than my Galaxy S8 which used to continually drop connection.
9.0.0.266, Very flakey Bluetooth since this update applied. Used to be fine before this, now i get random disconnects from my Galaxy Watch,, by VW headunit in the car, and random drops of audio from my Freebuds 2 Pro.
Starting to get rather annoying

Bluetooth quality issues when connected to more than one device.

Hello all,
I'm not sure where to start but I've been having the issue for quite some time and I'm sure there has to be a fix. I originally had an S6 Active paired with a Moto 360. I thought the speaker just had bad audio so I neglected to try and fix it. A couple years later, I'm on a Note 8 with a Gear S3 and having the same quality issue but the same speaker (Ion Explorer) so once again, I figured no big deal. Last December I bought a 2011 Ford Edge with the Sync 2 system. When I noticed it there, I knew something was going on. Factory reset everything and still had the issue. Had my wife connect her Note 8 and it sounded great! However, she only has one other device connected and it's a Fitbit Blaze that she doesn't wear always like I do my Gear, and sure enough she didn't have it on when we tried her phone. Two devices paired at once. As soon as I disconnect the Gear the quality instantly goes way up. Awesome! Found the culprit, but not the resolution. Is there ANY way to improve the audio quality while having both connected? It's not the worst thing in the world, but it's a definite nuisance to have to disconnect my Gear just to listen to music while I'm in the car. If it was only a little difference I wouldn't mind, but it's definitely a big gap between the two. And I always forget to pair the Gear back up until it's almost time to recharge. Any help with a fix would be greatly appreciated!

Stratos bad bluetooth range

Hello everyone,
I own a Stratos that I usually wear on my left wrist. However, when listening to music with my TaoTronics Bluetooth inears, whose BT receiver is near the right earbud, I constantly get stuttering audio with my watch on my left wrist.
If I wear the watch on the right wrist and hence have a smaller distance between the watch and the BT receiver, it gets better (but not perfect, though).
Has anyone else been experiencing these issues and knows some kind of tweak or workaround? When using the same headphones with my phone, I don't have any connection issues at all, even if I carry the phone in my pocket, which makes me think that the Stratos tries to save energy by using low transmission power. Since I still get some stuttering when wearing the watch on the right wrist, this is not a real workaround, too.
Regards
Tim
I got bluetooth disconnected from Stratos to my earphone sometime. However, turn off my earphones and on again solved the problem.
My earphones has the Bluetooth part on the right as well and I got connectivity issue when the watch on my left or right wrist.

Categories

Resources