Ativar VoLTE MI A3 da operadora TIM Brasil. - Xiaomi Mi A3 Questions & Answers

Fiz muitas buscas na internet e não consegui encontrar nada que resolvesse o problema da não ativação do VoLTE na Tim BR. Vi muitos tutoriais algumas postagens e que o que resolveria seria o IMS do aparelho estar registrado na rede da operadora Tim. Não encontrei nada nem que pudece registrar o MI A3 no IMS da operadora. Alguém pode me ajudar? Não fiz root no aparelho aínda aguardando achar algo que resolveria.
Meu Mi A3 esta atualizado para o Android 10 one

English only on XDA
Type *#*#4636#*#* in your dialer app and see if you have an option to enable volte

Já o fiz, porém não ativa o VoLTE diz que o IMS não está registrado. Coloquei o chip em um Motorola g5 plus e conectou o VoLTE normal.

Phael_7 said:
Já o fiz, porém não ativa o VoLTE diz que o IMS não está registrado. Coloquei o chip em um Motorola g5 plus e conectou o VoLTE normal.
Click to expand...
Click to collapse
English only man!
Go to Settings > Call Settings (Sim and Network)
Tap Cellular networks > Enable Voice over LTE On/ Off.

garylawwd said:
English only man!
Go to Settings > Call Settings (Sim and Network)
Tap Cellular networks > Enable Voice over LTE On/ Off.
Click to expand...
Click to collapse
I already did it too, but it does not activate, typing the code * # * # 4636 # * # * the option is checked, when I go to IMS status it is not registered. Place the chip on the Motorola g5 plus and connect to VoLTE. Is there any solution for this

Phael_7 said:
I already did it too, but it does not activate, typing the code * # * # 4636 # * # * the option is checked, when I go to IMS status it is not registered. Place the chip on the Motorola g5 plus and connect to VoLTE. Is there any solution for this
Click to expand...
Click to collapse
Your operator might be blocking Mi A3 phone from using VoLTE. It was the case in my country, operator was using white list for VoLTE - only specifically allowed smartphones were able to use this feature. I am not sure which phone identification operator sees and uses, but you might try to spoof Mi A3 as Motorola G5 phone and see what happens. You are out of luck with unrooted phone though.

Phael_7 said:
I already did it too, but it does not activate, typing the code * # * # 4636 # * # * the option is checked, when I go to IMS status it is not registered. Place the chip on the Motorola g5 plus and connect to VoLTE. Is there any solution for this
Click to expand...
Click to collapse
the option needs to be disabled , not enabed:fingers-crossed:
type the code until you see on bottom screen disabled
on android 9 you dont have any icon to see volte but its enabled

Phael_7 said:
I already did it too, but it does not activate, typing the code * # * # 4636 # * # * the option is checked, when I go to IMS status it is not registered. Place the chip on the Motorola g5 plus and connect to VoLTE. Is there any solution for this
Click to expand...
Click to collapse
It's not enough to activate VoLTE on the phone options, but make sure your dialed *#*#VOLTE#*#* to disable the VoLTE carrier check.
The next step is to load a compatible profile on the phone's modem. The default profile used in Brazil, aka "ROW Commercial", isn't compatible with TIM's VoLTE. If a compatible profile isn't loaded on the phone's EFS, it doesn't matter what you do in the android system, it'll simply not work.
To load another profile, try to follow this tutorial: https://forum.xda-developers.com/redmi-note-6-pro/how-to/guide-enabling-volte-t3914765
If the command there to activate diag mode doesn't work, try to find how to activate it on the Mi A3.

Related

[Q] I need help with a 3G connection - Android 2.2 F526-tablet LY

Hello,
I have a tablet version 2.2 android model LY-F526 (N706A). When you connect a 3G modem Huawei the tablet through programs of self APN setting provider can properly detect the SIM card I'm using the modem. He also, through programs can inform me of the RF signal network that the modem is receiving.
However, it does not ever connect. What may be missing?
In official settings it only has the Android:
Mobile Networks
data Enabled
Auto connect
Nothing More.
The ROM I am using is 829, last available for him.
http://www.chinadigitalcomm.com/post21652.html
Portuguese:
Possuo um tablet android versão 2.2 modelo LY-F526 (N706A). Ao conectar um modem 3G Huawei o tablet através de programas de auto configuração de APN consegue detectar corretamente o provedor do cartão SIM que estou usando no modem. Ele tambem, atraves de programas consegue me informar o sinal RF da rede que o modem está recebendo.
Porem, ele não conectar nunca. O que pode estar faltando ?
Nas configurações oficiais do Android ele só tem :
Redes Móveis
Dados Ativados
Auto connect
Nada Mais.
A ROM que estou usando é a 829 , ultima disponivel para ele neste forum:
http://www.chinadigitalcomm.com/post21652.html

QW09 Smart Watch help needed

hi guys I have brought a QW09 model Chinese smart watch running a version of android called funos I am trying to access the VPN settings at the moment I can only access this via the network menu which I can only access via the battery usage menu when the low battery menu appears does anyone know how I can access this menu without having to wait for the battery to go low and also how can I get info about funos because search the net doesn't bring up anything thanks for all of your help from David Heath
you can use this settings app to get those unaccessible screens https://play.google.com/store/apps/details?id=com.ion.setting
QW09 watch phone has poor connectivity
My QW09 watch phone has poor connectivity on both att and t mobile. I attribute the att performance to their 2g phase out. On tmobile it sees their towers just don't connect very often.
I'm posting this to see if others have had better success or to at least help others choose to not waste time on this watch like I did.......
It's specifically :
Tenfifteen QW09 Android 4.4 1.54 inch 3G Smartwatch Phone MTK6572 1.2GHz Dual Core 512MB RAM 4GB ROM Pedometer Bluetooth 4.0
Parameters:
Display: 1.54 inch screen
CPU: MTK6572 1.2GHz Dual Core
System: Android 4.4
RAM+ROM: 512MB + 4GB
Band Length: 8 x 12.2cm
Band Wide: 2.1cm
Bluetooth: V4.0
Camera: 2.0MP
SIM type: Single SIM (Nano SIM)
Feature: Message, Calculator, Sound Recorder, Pedometer
Network:
GSM: 850/900/1800/1900MHz
WCDMA: 1900/2100MHz
Hi, I hope you can help me... :crying:
I've installed FunFit app on my Huawei P8...then I paired the smartphone with my QW09 via bluetooth
(I'm sure because I've tried "Find watch" feature on Funfit and my smartwatch ringing...) and I receive notifications about lost call and sms (received) BUT I can't answer to any call from the smartwatch (while my phone is ringing the smartwatch vibrate only once and no green/red dialer options to answer or deny on the smartwatch are displayed) and when I try to make a call from smartwatch it only says "No SIM card" (no bluetooth option is displayed)...Can you help me please? Can you suggest me any check/attempt to do?
Thanks in avance!!
I own the watch for 3 days now and i find its great for its price.It seems its doesn't support call or text services via bluetooth and you can notice that from the bluetooth devices on your phone.Previously i had bought and OEM A1 which apart from having less functions overall , it was able to handle phonecalls and speak directly from it.
Ithink the qw09 notifies only ...my biggest concern now is its battery life....it drops too quickly depending on its use...
HeathHayle said:
hi guys I have brought a QW09 model Chinese smart watch running a version of android called funos I am trying to access the VPN settings at the moment I can only access this via the network menu which I can only access via the battery usage menu when the low battery menu appears does anyone know how I can access this menu without having to wait for the battery to go low and also how can I get info about funos because search the net doesn't bring up anything thanks for all of your help from David Heath
Click to expand...
Click to collapse
Try install setting search may be help you
Hey. I own the same and the battery drain is crazy. Were you able to find a solution for it.. Someone please help.
Boa tarde pessoal, eu adquiri um Relogio Smart What QW09 eu estava instalando um aplicativo nele e no momento que estava configurando a bateria acabou desligando o mesmo.
Coloquei pra carregar de boa quando fui ligar ele so aparece a tela FunOs e desliga fica assim o tempo todo .
Alguem pode me ajudar?
Robsonarsa said:
Boa tarde pessoal, eu adquiri um Relogio Smart What QW09 eu estava instalando um aplicativo nele e no momento que estava configurando a bateria acabou desligando o mesmo.
Coloquei pra carregar de boa quando fui ligar ele so aparece a tela FunOs e desliga fica assim o tempo todo .
Alguem pode me ajudar?
Click to expand...
Click to collapse
Acho que consigo, mas você já deve ter arrumado né
I have one as well but I cannot get it to connect Bluetooth to my phone at all. Does anyone have any suggestions?
Qw09 APN settings
hi friend :
I own that watch and it is fantastic!
ok you will find that gliding your finger very gently will change screens way easier. from the clock screen or face glude your finger up. on the right there will bea gear icon which is for settings. tap on it and you will then see the settings options. Wireless and Networks is where you will find Mobile Networks. Tap on it and then go to Access Point Names to configure a new APN. I hope this helps.
I use the T mobile sim. All works fine Data, Txt and phone calls.
I only get 3g at the moment and I am trying to get it to do 3g which itbis capable to.
---------- Post added at 04:01 AM ---------- Previous post was at 03:53 AM ----------
It is a full android phone and it will answer calls directly not from bluetooth.
buon giorno a tutti o comprato lo stesso modello ma appena provo o ascoltare musica o comporre numero da sim o qualsiasi altra azione impegnativa si spegne e non riparte piu a volte anche per 3 4 ore qualche possibile soluzione?
hola
Hi friend I used Google translate but still could not understand the problem you are having with the watch. Is it that there is no volume or sound ? There is a control for volume from the main screen or clock display. Glide the finger up to get to the options.
Raymond
il dispositivo se provo ad ascoltare musica o inserire sim e provo a chiamare si spegne e si puo riaccendere dopo un po di tempo
Qw09
Hi, I understand now but can not figure out the solution, it should not be doing that when working normally. It seems defective.
Raymond
Lo siento pero no entiendo porque tiene ese problema. Esta probablemente defectuoso. Saludos. Raymond
ps. El español se parece al Italiano un poquito y por eso le escribo aquí.
Connect wifi and gps only when needed.
Sitetrial101 said:
Hey. I own the same and the battery drain is crazy. Were you able to find a solution for it.. Someone please help.
Click to expand...
Click to collapse
Connect wifi and gps only when needed.
Sitetrial101 said:
Hey. I own the same and the battery drain is crazy. Were you able to find a solution for it.. Someone please help.
Click to expand...
Click to collapse
Root the watch and install Greenify
Need help
I own a tenfifteen qw09 full Android smartwatch. I have TMobile and purchased a Sim just for these watches with all the features unlimited phone, text, and data. I can't seem to connect it it's 3g so no issue there sometimes I can text and call but can't get data working can anyone help that has a similar situation and is successful... Thanks

Lenovo K6 (ALL MODELS) - Unknown baseband, iMEI error, Sec SIM miss EASY SOLVE 100%

Hi guys, I have a Lenovo K6 Note (K53b36 - Dual SIM Brazilian version)
After lose second sim card function, I try recover it using some tutorials in this site and around web, but lose first sim card and baseband too. I used qfil tools and got sahara error. I tried recover IMEI with qcn hex editor framework and did'nt work too.
Then, I solve my dillemma (and dilemma for many people :silly using Lenovo Moto Smart Assistant tool (https://support.lenovo.com/ma/pt/downloads/ds101291). It's a set of software tools applied on the Lenovo maintenance station. It's function aimed at Update Rom, Device Rescue and Tips Online.
Now, my K6 Note is 100% working again. :highfive:
Sorry my bad english. :angel::fingers-crossed::good:
There is no model number of k6 on that software
bom dia amigo, tb sou brasileiro, tenho o mesmo aparelho que vc e estou com esse problema de nao pegar dois chips juntos, no meu caso nao pega nextel e claro juntos, tanto no chip 1 quanto no 2, separados todos os dois funcionam normalmente. vc conseguiu uma solução para esse tipo de problema?
oppodi said:
There is no model number of k6 on that software
Click to expand...
Click to collapse
No needed. The software recognize phone model automatically.
ladimirjr said:
bom dia amigo, tb sou brasileiro, tenho o mesmo aparelho que vc e estou com esse problema de nao pegar dois chips juntos, no meu caso nao pega nextel e claro juntos, tanto no chip 1 quanto no 2, separados todos os dois funcionam normalmente. vc conseguiu uma solução para esse tipo de problema?
Click to expand...
Click to collapse
This site dont accept our language. English is required for posts. I had same problem than you. Install official firmware fix it. Run Lenovo Smart Assistant, make a backup and recover your second chip function.
Nevermind, I fixed it by editing the qcn file and correcting the IMEI number and flashing the qcn file
oppodi said:
Nevermind, I fixed it by editing the qcn file and correcting the IMEI number and flashing the qcn file
Click to expand...
Click to collapse
??????????????????
Can you explain the steps you have taken

SM-G570M/DS No OEM Unlocker (Help) pt-BR Google Translated

Estou usando novamente um J5 Prime SM-G570M e quando tentei desbloquear o OEM não encontrei a opção, então atualizei até o binário 9 (G570MUBS9CTJ2_G570MUUB9CTJ2) , Android 8 para ver se aparecia a opção de desbloqueio, mas acho que só piorei a situação, pois não há como fazer downgrade, então estou travado na versão original e cheio de aplicativos inúteis que não posso retirar sem root e sem muitas coisas que uso quando em aparelho root. Sei que existem diversos tópicos sobre algo parecido mas os que encontrei não me ajudaram, inclusive as soluções normalmentew dizem para desbloquear AOM sendo que esta opção nunca apareceu para mim... alguém pode me ajudar? Pelo menos se lembram de algum tópico que realmente possa me ajudar? até o momento não consegui nada.
Resultados de tradução - Translation results​
I'm using a J5 Prime SM-G570M again and when I tried to unlock the OEM I didn't find the option, so I updated to binary 9 (G570MUBS9CTJ2_G570MUUB9CTJ2) - Android 8 to see if the unlock option appeared, but I think I only made the situation worse as there is no way downgrade, so I'm stuck on the original version and full of useless apps that I can't remove without root and without a lot of things I use when rooted. I know there are several topics about something similar but the ones I found didn't help me, even the solutions usually say to unlock AOM and this option never appeared for me... can anyone help me? Do you at least remember a topic that can really help me? So far I haven't gotten anything.
I have the same problem
25VANY said:
I have the same problem
Click to expand...
Click to collapse
I installed several different binary 8 and 9 stock firmwares (ZTO, ZTA, PET etc) and nothing solves it, damn model, damn company.
I'll have to use an old cell phone and still use only the basics until I buy a better one. Xiaomi for sure, as it should be better and with similar prices.
Even fastboot mode is impossible to use
(tava com esse problema, mas reolvi ontem, segue a call)
Make sure developer mode and usb debugging is disabled.
--This new method worked for me and about 4 other guys with G570M--
Step 1: Wait for 168 hours
Step 2: Go to Date/Time settings and change the date to 05/05/2021.
Step 3: Restart and go to recovery and clear the cache
Step 4: When you turn on the device, make sure wifi is enabled and connected to some network, go to the update tab and disable auto update
Step 5: Click several times on the manual update button
Step 6: Go to developer settings and the oem should be there
---Wait for 168 hours with stockrom TTT--- (instala essa rom e espera as 168H e faz o metodo)
Download Samsung Galaxy J5 Prime SM-G570M TTT Trinidad and Tobago G570MUBS9CTG3 firmware
Fast download latest Samsung Galaxy J5 Prime firmware SM-G570M from Trinidad and Tobago with G570MUBS9CTG3 and Android version 8.0.0
www.sammobile.com
any questions please enter in telegram: BRASIL J5 PRIME EXYNOS 7570 .

Need help, G8x or V50s with IMPL=0

Hi all,
Is anybody has a G8x or V50s device with IMPL=0?
To check it, enter the hidden menu, type: *#546368#*xyz# (replace xyz with 510 for V50s), go to SVC Menu and then MID info.
If your IMPL is 0, please let me know and I'll hit your dm.
Mine is IMPL=1, and if my experiment working, I'll post a tutorial here in return.
Thank you
ardian1899 said:
Hola a todos,
¿Alguien tiene un dispositivo G8x o V50s con IMPL = 0?
Para verificarlo, ingrese el menú oculto, escriba: * # 546368 # * xyz # ( reemplace xyz con 510 para V50s ), vaya al menú SVC y luego a la información MID.
Si tu IMPL es 0, avísame y te golpearé.
El mío es IMPL = 1, y si mi experimento funciona, publicaré un tutorial aquí a cambio.
Gracias
Click to expand...
Click to collapse
In my case, it shows IMLP = 1, but there is something that bothers me in the temperatures, it shows 296c
viewy said:
In my case, it shows IMLP = 1, but there is something that bothers me in the temperatures, it shows 296c
Click to expand...
Click to collapse
Shows where?

Categories

Resources