Hey guys,
I was really disappointed to see that the Oppo Find X2 Pro or specifically ColorOS doesn't include lockdown mode, if anyone is unsure of what this is, I'll give a brief explanation:
Lockdown mode comes in as a worst-case option that lets you disable face unlock, fingerprint-based unlock, as well as any smart unlock options you might have set up. It goes a step further and even blocks lock screen notifications so that any private conversations remain just that: private.
If you'd like to read more about it here's a link below:
https://www.androidpolice.com/2018/...nt-unlocking-something-called-extended-access
This feature was included way back with Android 9 Pie & to see it not even on ColorOS 7.1 or the Android 11 Beta (so far) is really disappointing.
So, what's the point of this thread?, Well not only to bring attention to the matter but also to request it to be brought to ColorOS, I noticed a tweet from ColorOS on Twitter linked below where we can request it
https://twitter.com/colorosglobal/status/1270926598590664704?s=19
Even if this feature isn't something you personally want, I'd really appreciate it if everyone could bring attention to this or try get the attention of Oppo or the ColorOS team to have this added or even post on the ColorOS community forums as it's a great security feature of Android.
Thanks.
[TL;DR - ColorOS is missing a Android security feature called Lockdown mode, please request this across social channels or on the ColorOS community forums for it to be added]
You mean No notification on Lockscreen?
Works for me
Gesendet von meinem CPH2025 mit Tapatalk
flummi3000 said:
You mean No notification on Lockscreen?
Works for me
Gesendet von meinem CPH2025 mit Tapatalk
Click to expand...
Click to collapse
No, please take time to read, Lockdown Mode is a security feature that when enabled locks the device and disables fingerprint sensor, face unlock and smart unlock, and requires password to open the device
UPDATE:- Here is the link to request the feature to the ColorOS team, if you could take a few minutes out your day to fill this in please do, even if you don't personally want/need it, you'll be helping to contribute to users that do
https://community.coloros.com/thread-42556-1-1.html
Just got my new OnePlus Nord 2 and because of the imminent Color OS and Oxygen OS merge, I can't enable lockdown mode either! It was always an option in previous Oxygen OS releases but I think this feature will be removed and forgotten by the devs because of the merge...
Related
Unique Controls - Change the way you use your device
This app brings you 2 great features that changes the way you use your device as soon as you get used to them you will never want to live without them again
The first one "Halo" is a little bubble that hovers over all your apps. Halo gives you quick access to your notifications (similar to facebook chat heads but for every app) by showing them in a beautiful and intuitive
way. You can launch, dismiss and scroll trough all of them.
The second feature is "Pie". Pie gives you the power of gesture navigation in whatever app you are. Simply swipe up from the bottom of the screen to reveal a beautiful menu with your favorite actions.
So what are you waiting for, try it out and experience android as it should be
In order to use floating windows you have to have xposed framework installed
Latest update 31.12.16
Full version now almost 50% cheaper!
Changelog in the app
Xposed repository link:
https://repo.xposed.info/module/com.ivianuu.halo
Google Play link:
https://play.google.com/store/apps/details?id=com.ivianuu.halo
Google + community
https://plus.google.com/communities/104696259824293704774
Youtube demo:
https://www.youtube.com/watch?v=E3NpULauO9s
I would call it an alpha in case you find any bugs or you have an feature request post it here.
Thanks,
Manu
Nice module
Sent from my A0001 using Tapatalk
Thanks does it work for you?
Gesendet von meinem SM-G920F mit Tapatalk
it is a very good module:good:
but for the link i had to go to youtube,instead add it right here in the thread ,please
can u add more features like opening more than one app in 2 windows or more cause that would be really awesome
First time pie work for me ))))
I have a lg g4 811p tmobile and halo and pie are awesome
Keep the good work my friend ?
And this is dope
PA Legacy is back
Sent from my Moto G using XDA Labs
arjuntsgowda said:
it is a very good module:good:
but for the link i had to go to youtube,instead add it right here in the thread ,please
can u add more features like opening more than one app in 2 windows or more cause that would be really awesome
Click to expand...
Click to collapse
I don't think this will happen i want to keep the floating windows fast and clean.. but maybe in the future
Gesendet von meinem SM-G920F mit Tapatalk
Does it work with MIUI 8?
[Alien] said:
Does it work with MIUI 8?
Click to expand...
Click to collapse
I don't know it would be great if you try it out
Gesendet von meinem SM-G920F mit Tapatalk
IVIanuu said:
I don't know it would be great if you try it out
Gesendet von meinem SM-G920F mit Tapatalk
Click to expand...
Click to collapse
Yep! It works
Awesome module !
Great to see PA feature on MM :good:
since there's no PA maintainer for my device
Also, will you add "Hover" feature?
Thanks yeah i will add hover in the future but it's little harder to implement than halo
Gesendet von meinem SM-G920F mit Tapatalk
Hello, great module !
Work fine on Kenzo exodus rom here. I'd like to suggest some more customization of pie such as menu button always
Mrxyzl said:
Hello, great module !
Work fine on Kenzo exodus rom here. I'd like to suggest some more customization of pie such as menu button always
Click to expand...
Click to collapse
Added to todo list
Gesendet von meinem SM-G920F mit Tapatalk
great job！
i found some issues:
some how the accessibility control of PA has disable and could not be enable 'cause some app cover the window.
further, if the status in 'app notifycations' can "all or none", it will be great.
and i'd love to know that, it is any possible that PA interacts with XHFW3 that makes the app booted in PA become movable and adjustable.
if you dont mind, i would like to help to translate the ui into Chinese.
miroky_mac said:
great job！
i found some issues:
some how the accessibility control of PA has disable and could not be enable 'cause some app cover the window.
further, if the status in 'app notifycations' can "all or none", it will be great.
and i'd love to know that, it is any possible that PA interacts with XHFW3 that makes the app booted in PA become movable and adjustable.
if you dont mind, i would like to help to translate the ui into Chinese.
Click to expand...
Click to collapse
Thanks
Yeah its because halo is on the screen you have to dismiss the bubble and reenable it after you gave the permissions i don't think there's any workaround for that:/
I will add this to my todo list
Hmm i don't know but it don't think so
Yeah that would be great but first i have to read how the hole multiple language thing works because i started programming somewhere between march and april and this is my first app
Gesendet von meinem SM-G920F mit Tapatalk
IVIanuu said:
Today i would like to share my first app with you guys. Pa for Xposed brings some old Paranoid Android features back.
- Paranoid Android's Halo bubble
- Options to pin apps to halo
- Options pin an app launcher to halo
- Floating windows
- Paranoid Android's Peek
- Some peek settings
- Paranoid Android's Pie Controls
- Option to change pie gesture
- Options to setup which notifications should be shown in halo and peek
- Option to disable Heads up notifications
- Option to enable quick pulldown
https://repo.xposed.info/module/com.ivianuu.halo
Google + community
https://plus.google.com/communities/104696259824293704774
Youtube demo:
https://www.youtube.com/watch?v=E3NpULauO9s
I would call it an alpha in case you find any bugs or you have an feature request post it here.
Thanks,
Manu
Click to expand...
Click to collapse
I wait for module like this since xHalo was stopped development. (Unfortunately new xHalo don't work good as it be on previous android version.)
PA on MM rock!!
THANK YOU!!!
I'll try and report back to you soon...
Sent from my SM-N9005 CM13 Temasek ROM
Always floating window
when I activate floating window on my KK phone; every app that I launch is on floating window which is quite annoying, any reasons for this or has anyone reported the same issue as mine?
Alright after try
It's work as expect. (I only use Halo feature)
I got 1 question.
Can I run apps in floating windows by use some trigger (such as run as task in Tasker)
Is it possible?
Sent from my SM-N9005 CM13 ROM
How to disable this notifications.
Samsung Pixel Experience PBy CodeFox & OpenSauce9810
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimised as much as possible for our Samsung Devices. This is what differentiates this rom from the one you can find in the Project Treble Forum. I also plan to provide regular updates and improvements very frequently. I'm aiming for weekly if not more.
Why not Rainbow_Dash?
We're a part of the same team and he's taking a break from developing for the moment, so I'm going to do my best to support you with regular updates and support where possible. So his previous version should be considered redundant.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash the ARH6 Vendor Image to your Vendor Partion from TWRP (Press the Install Image button at the bottom right of where you usually select a flashable zip)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
What's different to the PE in project treble forum?
Smoother UI Performance Fixes
Debloated unneccessary libs from other devices
Vibration Motor has been corrected (it's too powerful in GSI)
Regular Maintenance / Builds & Support
Changelog:
30.11.2018 - Initial XDA Release & Unofficial rollout.
01.12.2018
Animation integers corrected to be smoother
Black boot-animation added, no more being blinded by the boot animation
Pixel Live Wallpapers included
High Resolution default wallpaper added
09.12.2018 (Now maintained by @malinathani
Made system ui a hella smoother compared to before
Face unlock works
Phh settings removed. All samsung options should now be persistent.
14.12.2018
-Fixed fingerprint on note 9, should work now with almost any vendor so get the latest one
-Almost everything works now
Downloads:
ARH6 Vendor
System Image
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
XDA:DevDB Information
[Discontinued]Pixel Experience P[UNOFFICIAL][14.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy Note 9
Contributors
CodeFox, Rainbow_Dash, malinathani, Mohammed Nathani, Ivan Meler, Pixel Experience Team, phhusson
Source Code: https://github.com/PixelExperience
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: ARH6 Vendor
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2018-11-30
Created 2018-11-30
Last Updated 2019-01-07
So nice I'm on the 7 days jail but a soon I get out I definitely will install this amazing Rom ... thanks for share your work with us ? keep going
Thanks but still fingerprints doesn’t work
Sent from my iPhone using Tapatalk
---------- Post added at 11:38 PM ---------- Previous post was at 11:33 PM ----------
azooooooooo said:
Thanks but still fingerprints doesn’t work
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Edit o just add my fingerprint again and it works. Thanks
Sent from my iPhone using Tapatalk
I notice that you haven't added known issues to the op? Are you waiting on further testing? Would be useful to have.
Thank you for the rom btw. And thanks to the entire opensauce9810 team. Very much appreciated
MANY THANKS, rom looks awesome!! My screen brightness is set to 100% however it looks like it is on 15% I can hardly see stuff on my screen, is there a way to increase brightness with build prop or something?
UPDATE
Never mind established it was the universal ctsprofile: false that I installed
zoltain73 said:
MANY THANKS, rom looks awesome!! My screen brightness is set to 100% however it looks like it is on 15% I can hardly see stuff on my screen, is there a way to increase brightness with build prop or something?
UPDATE
Never mind established it was the universal ctsprofile: false that I installed
Click to expand...
Click to collapse
You need to enable the extended brightness range in phh settings too under Samsung. Will let your screen go brighter
CodeFox said:
You need to enable the extended brightness range in phh settings too under Samsung. Will let your screen go brighter
Click to expand...
Click to collapse
Thanks is there a way to pass ctsProfile in magisk? It remains falls.
Since my Note 9 is still on it's way and I'm on a S9 now I have a simple question.
In 8.1 AOSP ROM's IMS services and the Iris scanner don't work. Do they work on this ROM? And if Iris scanner doesn't work, can we still use biometric unlocking? I hate fingerprint scanner so on the rear as I use wallet cases and can't easily reach it.
I believe smart lock face unlock does not work. I added my face to it but I'm unable to 'improve face matching'. It simply says cannot start finding your face. And nothing happens when I try to unlock my phone using face unlock either.
Other than that, the typing feels a bit slower than stock Samsung roms. Not sure if it's the touch response or what. I disabled the haptic feedback for the keyboard but it still seems a bit slower. Could be just me though..
Apart from these issues, rom is definitely a daily driver so hats off to the entire team
zoltain73 said:
Thanks is there a way to pass ctsProfile in magisk? It remains falls.
Click to expand...
Click to collapse
Download hideprops in Magisk downloads. Reboot to initialise it. then download a terminal emulator from the playstore and type the command "props" without the quotes.
Grant SU to the terminal
then pick edit fingerprint. Select Samsung, and choose the s9+ fingerprint (number 22 I think). Reboot and then CTS will pass.
Imprezzion said:
Since my Note 9 is still on it's way and I'm on a S9 now I have a simple question.
In 8.1 AOSP ROM's IMS services and the Iris scanner don't work. Do they work on this ROM? And if Iris scanner doesn't work, can we still use biometric unlocking? I hate fingerprint scanner so on the rear as I use wallet cases and can't easily reach it.
Click to expand...
Click to collapse
Iris Scanner will never work in an AOSP Rom. The libs are proprietary to Samsung experience roms.
Nasty_z said:
I believe smart lock face unlock does not work. I added my face to it but I'm unable to 'improve face matching'. It simply says cannot start finding your face. And nothing happens when I try to unlock my phone using face unlock either.
Other than that, the typing feels a bit slower than stock Samsung roms. Not sure if it's the touch response or what. I disabled the haptic feedback for the keyboard but it still seems a bit slower. Could be just me though..
Apart from these issues, rom is definitely a daily driver so hats off to the entire team
Click to expand...
Click to collapse
Yeah it's a little quirk with GSI's unfortunatley. The vibration motor causes somewhat of a delay when typing. Turning off haptic feedback completely seems to make it normal for me. I've gotten used to typing without haptic feedback now haha.
CodeFox said:
Yeah it's a little quirk with GSI's unfortunatley. The vibration motor causes somewhat of a delay when typing. Turning off haptic feedback completely seems to make it normal for me. I've gotten used to typing without haptic feedback now haha.
Click to expand...
Click to collapse
I noticed that you mentioned in the OP that you use Galaxy wear?
A bit OT but is there a way to use the Gear with different roms without having the Gear being reset every time? It just seems to get reset every time I pair with it on a new rom.
Nasty_z said:
I noticed that you mentioned in the OP that you use Galaxy wear?
A bit OT but is there a way to use the Gear with different roms without having the Gear being reset every time? It just seems to get reset every time I pair with it on a new rom.
Click to expand...
Click to collapse
I wish there was, I'm so sick of having to reset it I literally use my watch just as a watch most of the time because I'm flashing new builds so often. It's a pain in the neck and I don't know why Samsung did it this way, it's frustrating.
Hi #CodeFox thanks for your work I want to ask you something, I know that the answer will be absolutely no but I loved to give it a try
Can you please make a pixel experience p ROM for Samsung galaxy j4
Awesome
Can't wait to try this
New Build Uploaded. See OP for details.
CodeFox said:
Download hideprops in Magisk downloads. Reboot to initialise it. then download a terminal emulator from the playstore and type the command "props" without the quotes.
Grant SU to the terminal
then pick edit fingerprint. Select Samsung, and choose the s9+ fingerprint (number 22 I think). Reboot and then CTS will pass.
Click to expand...
Click to collapse
MANY THANKS, worked like a dream and passed!
Hi all,
Will Dolby atmos work?
Hi there,
great ROM. Flashed it today and so far everything looks very good.
Just tried out the camera and found a weird bug:
When taking videos (front and back camera), the screen flashes green about every second during recording. The video itself is not affected.
Seems to happen for every camera app.
Any way to fix this?
The beta version of Android Q is out for Realme 3 Pro.
General discussion and bugs thread.
p.s. The update brings pure stock Android, not ColorOs skinned Android Q.
Link:
https://www.realme.com/in/android-q
Download:
https://c.realme.com/in/post-details/1125713193470001152
Screenshots
Just updated and downgraded, as there are a series of bugs straight off the cuff:
SIM didn't connect (Vodafone IN)
The alignment is not uniform throughout the OS
Screen Lock doesn't work (apart from Swipe - no pattern, no PIN, no password, thus no Smart Lock)
Dark Mode is inconsistent - it is dark grey on some pages, pure black at some and stark white at some.
Now the good things:
Animations are a major overhaul - feels much smoother and fluid
Lot of under the hood improvements in privacy, location and settings page
Notification tray has been changed a bit (slightly buggy)
And a lot more...!
Attaching screenshots
P.S. Far from a daily driver
Didnt flash the beta as of yet due to the major bugs but I am really looking forward to get rid of color os! Hope we get the major bugs resolved in the next beta update .
Just a small question to anyone who installed this .. I heard someone saying that VOOC charging is not supported. I always thought this was a hardware thing and not a software thing . So can someone test this and let us know?
Regards,
Do they provide weekly updates with improvements?
kushal16 said:
Do they provide weekly updates with improvements?
Click to expand...
Click to collapse
Nothing as of now
kushal16 said:
Do they provide weekly updates with improvements?
Click to expand...
Click to collapse
Nope, They have a schedule of theirs, of releasing betas, but yes if devs at android think, they can rollout patch to sort out major bugs . But next beta is schduled to june 1st week
I want to buy realme 3 pro. But I'm confused about one thing. Suppose i buy the phone now and use it on color os and when Android q beta improves. And when Android q stable or at least beta 4 (stable) comes out can i then flash the Android q over color os?
Yes you can
Xiaomi eu 9.10.10
https://sourceforge.net/projects/xi...aomi.eu_multi_MI9_9.10.10_v11-10.zip/download
CHANGELOG 9.10.10
Attention
New - Empowering the productive MIUI 11
New - Comprehensive design optimized for fullscreendisplay devices
New - Removing visual clutter, improving touch controls, and refining the use of color allowed us to create the system where nothing stands between you and the content.
Launcher
New - Google feed in left homescreen
Ambient display
New - Ambient display now comes with gorgeous dynamic themes. Essential information is displayed on your screen 24/7.
New - Personalize your device with a unique signature.
New - Keep your screen alive with our amazing special effects.
Sounds of nature
New - Wake up to the gentle sounds of nature with our new alarm ringtones.
New - Notification sounds won't make you tired. Now, they keep changing dynamically, just like nature does.
Mi Share
New - Transfer files from phone to phone at breakneck speeds.
New - Mi Share works both on phones and computers.
Casting
New - MIUI allows you to cast videos, games, documents, and apps to more than 300 TV models directly from your phone.
New - MIUI's casting functionality allows you to hide personal items to keep all sensitive things private.
Printing
New - Print photos and files directly from your phone without installing any additional apps
Ultra battery saver
New - Use this feature to challenge your device to a whole day on just 5% of the battery.
More features
New - Tasks. Manage and edit your tasks in the Notes app. Receive timely notifications and mark things done.
New - Family guard. Control connected devices to help your friends and family.
New - Screen time. View stats and manage your time more efficiently.
New - Emergency SOS. Rapidly press the Power button 5 times to send an SOS message to your emergency contacts.
New - Quick replies. Reply to messages from any app.
New - Themes. Lots of free resources to make your device truly unique.
New - Autofill passwords. Store passwords on your device and use them whenever you need them.
New - Calendar. All your events in one place.
New - Security. Safeguard and optimize your device.
New - Game Turbo. Turn your device into an ultimate gaming console.
Is this for Mi 9? Has anyone tried this version?
I download and test it
AFiREiNSiDE182 said:
Is this for Mi 9? Has anyone tried this version?
Click to expand...
Click to collapse
Yes mi9 cepheus
ManuBBXX said:
I download and test it
Click to expand...
Click to collapse
Everything seems to work perfectly. I will see the battery life in the next few days. :good:
Man are you blind?
g_seva said:
Man are you blind?
Click to expand...
Click to collapse
9 9.27
This 9.10 10
androidlab99 said:
9 9.27
This 9.10 10
Click to expand...
Click to collapse
Ok, let's make a new thread weekly
There links to 9.10.10 in replies.
g_seva said:
Ok, let's make a new thread weekly
There links to 9.10.10 in replies.
Click to expand...
Click to collapse
Link removed from that thread. Forum moderator said that out of topic.
MDeodex said:
Link removed from that thread. Forum moderator said that out of topic.
Click to expand...
Click to collapse
Link to MIUI 11 xiaomi.eu in MIUI 11 xiaomi.eu thread out of topic? He was high?
the final ROM miui for 11 phones is ready soon it will be for the mi9
androidlab99 said:
the final rom miui for 11 phones is ready soon it will be for the mi9
Click to expand...
Click to collapse
developer is much better
just installed it
seems to work lie a charm
will see for battery life
IS it better to flash this BETA version, or the [ROM][Developer] MIUI 11 xiaomi.eu ?
ManuBBXX said:
IS it better to flash this BETA version, or the [ROM][Developer] MIUI 11 xiaomi.eu ?
Click to expand...
Click to collapse
I would say 9.9.27 better. In 9.10.10 by now ok google, don't work, you can't remap ai button and no dual frequency GPS.
Thread closed
Kindly use the existing thread for further discussions
https://forum.xda-developers.com/Mi-9/how-to/rom-miui-11-xiaomi-eu-t3973693
Thanks
How to remove navigation bar (three button) in Android 11. NOTE: Root is required to use this method!
Hi guys! Please either move or remove this thread if it's either in the wrong place or covered by another thread. This thread is intended to walk through removing the three-button navigation bar in Android 11 since the traditional way ('wm overscan') doesn't work anymore.
This is useful for if you want to use an alternative gesture system, such as Fluid Navigation Gestures (FNG). Before you get started with the below, be sure you have enabled the replacement system first. FNG's built in navbar disabler doesn't work on Android 11, so you don't need to have this switched on.
Assuming you have root already (there should be plenty of tutorials available to help you out on this), all you really need to do is download Substratum Lite and nonavbar.apk (available at: https://1drv.ms/u/s!AsqLR2yZd3fMiaV4fcCSAw7trgl8AQ?e=e9ncai). Choose to install nonavbar.apk, then it should show up as a theme in 'lite'. After pressing the NoNavBar theme, you should see 'Android System (android [11])' to the left of a checkbox. After checking this box, press the '1 SELECTED' button on the bottom right. Then, press 'Install selected', restart, and get back to this screen to finally 'Enable selected'.
See for screenshots: https://photos.app.goo.gl/HL48xhsZMPMkmcdV7
And at that, you should have your replacement gestures as your primary input now! Enjoy!
I'm by no means an expert, so my ability to help with questions is limited. Hope this helps!
Works perfectly on OP8 Pro with latest Android 11 update. Thanks a lot.
I would appreciate if there is the way to completely
hide status bar in android 11 with "no display cutout magisk module".
Been searching this for awhile now. Thanks for the solution, works great
Amazing! Thanks so much for looking into this, was very torn away when I couldn't disable nav bars given I used immersion mode with FNG on Android 10. Tried this on android 11 and it worked. Actually for Galaxy OneUI devices I don't need to be rooted.
You can just use the substratum lite and install synergy - OneUI compiler app. It will apply the modifications on a built in OneUI theme.
Question; how did you find or created that nonavapp.apk?
Since android 11 came out and google pulled that overscan crap, I have been scouring the net for a solution to use FNG. Thank you. Thank you. Thank you.
As the creator of the Fullscreen/Immersive gestures module, I'll just say, thanks for offering users the ability to use their favorite alternative navigation methods on Android 11
It's really unfortunate that people have to be either forced to use Android's standard navigation gestures (which quite a few people dislike) or an impossible to be hidden 3 button navbar (due to the removal of Overscan)
Keep up the good work
On Pixel 5, after enabling NoNavBar, there's a delay when switching between camera modes. It goes from 1 sec without it enabled to almost 5 second after enabling it
Works perfectly fine on my 7T Pro running OOS Beta 1! Thanks!
Works on great on mi A3! Thanks a lot!
Works great, but, could you possibly build it for the "normal" substratum?
Thanks a lot
Excellent work!
I was looking for a solution to this problem with FNG.
Now, If I can say something about this, in my case, the Home Gesture (Swipe Up) dindt work. I reboot the phone and nothing happened. After some minutes, I decided to try this:
Configuration > Adittional Settings > Full Screen Display > Activate the option "Full Screen Gestures".
This way, I could to use the Swipe Up gesture.
To finish, I would like to know what to do to undo all this configuration when I decide not use FNG anymore. I'd really appreciate it.
NOTE: I have a xiaomi phone (MI 9).
Substratum lite is free, but it requires another app called synergy (it's just $2, but it's annoying to have to pay for it). haha
Either way, this tutorial worked very well for my galaxy s10+, so that I could use FNG instead of the new navigation bar from android 11 (the new navigation bar is pretty good actually, but it's annoying as hell that it didn't let me disable the Google Assistant shortcut that is activated by holding the mid button). Thank you for this solution!
Thanks for this apk. I used to use XDA navigation gestures a lot on A10. Which I really miss a lot on Note 20 OneUi 3.1. so question is can I use this on a non rooted OneUi 3 with synergy and substratum lite?
hi, does anyone tried it on ONEPLUS 8 ?
thanks
giusmobile said:
hi, does anyone tried it on ONEPLUS 8 ?
thanks
Click to expand...
Click to collapse
This works perfectly on my OnePlus 8T on Android 11, so it should work the same on OP8.
Thank you so much @Veiran for sharing with us, it has been many months that a lot of us were searching for the solution. I didn't know that this was posted back then in Nov 2020, but I am glad to find it today!
Is the source code open for this?
giusmobile said:
hi, does anyone tried it on ONEPLUS 8 ?
thanks
Click to expand...
Click to collapse
Yes i am on the current stock rom and its working great on my Oneplus 8
The provided link to the nonavbar.apk does not work anymore. Can someone share this apk with me?
Link is working.
@Fr1day_13 - thanks. I tried it under windows and it works, but not under Android. My fault!