Does anyone know how to remove 50% battery limit on V60 Retail Demo Unit? The device is great otherwise, but 50% sucks :/
PrincePadraic1 said:
Does anyone know how to remove 50% battery limit on V60 Retail Demo Unit? The device is great otherwise, but 50% sucks :/
Click to expand...
Click to collapse
Probably in developers options.
Switch off and charge to 100%.
chortya said:
Switch off and charge to 100%.
Click to expand...
Click to collapse
Unfortunately when turned off it still only charges to 50%
PrincePadraic1 said:
Unfortunately when turned off it still only charges to 50%
Click to expand...
Click to collapse
Hello I got a LG Wing and I have the same limitation for battery
sev7en said:
Hello I got a LG Wing and I have the same limitation for battery
Click to expand...
Click to collapse
You can get rid of this limitation on the LG Wing by flashing the stock firmware. I made a guide here. I'm not sure if the same process works on the V60.
Edit: According to others, it does not work on a V60 and will likely brick the device.
I will strongly advice anyone against following the above on V60 retail demo unit. You will definitely brick your unit. Don't even try it.
Never tried it on a V60. I can only confirm it works on an LG Wing.
gd243 said:
Never tried it on a V60. I can only confirm it works on an LG Wing.
Click to expand...
Click to collapse
There are any number of people who have bricked their V60 retail demo unit trying to flash a stock firmware. The problem is V60 retail demo unit does not follow the same partition structure as in a stock firmware. So it results in a dead unit on boot.
Royaltiger said:
There are any number of people who have bricked their V60 retail demo unit trying to flash a stock firmware. The problem is V60 retail demo unit does not follow the same partition structure as in a stock firmware. So it results in a dead unit on boot.
Click to expand...
Click to collapse
So no way to unbrick my demo v60
Did your demo v60 have own unlock in developer options? Also do I need to be rooted to do this?
PrincePadraic1 said:
Does anyone know how to remove 50% battery limit on V60 Retail Demo Unit? The device is great otherwise, but 50% sucks :/
Click to expand...
Click to collapse
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
Andyman100 said:
Probably in developers options.
Click to expand...
Click to collapse
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
Bahmale said:
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
Click to expand...
Click to collapse
I can Confirm its work By the way my v60 was hard bricked and I used testpoints to make it work again
known i need to make fingerprints work after installing fingerprint sensor
and network
kamalsahhar123456 said:
I can Confirm its work By the way my v60 was hard bricked and I used testpoints to make it work again
known i need to make fingerprints work after installing fingerprint sensor
and network
Click to expand...
Click to collapse
Finger print work
kamalsahhar123456 said:
Finger print work
Click to expand...
Click to collapse
Did you get it working? And if so, how?
gd243 said:
Did you get it working? And if so, how?
Click to expand...
Click to collapse
***fingerprints work after installing fingerprint sensor***
The demo v60 doesn’t have fingerprints sensor you need to open the phone and add one
Fingerprint fix
1. Open the dialer and dial: *#546368#*600#
2. SVC Menu > Handprint > HandID Logging = ON
3. Device Test > SAAT > Service Menu – Manual test > Optical Fingerprint test
Complete the test and when a green circle shows tap it, when you see a button “pass” click it. At the end it should fail so just click the “fail” button when there is no “pass” button anymore.
Start the test by clicking "start", then hold the green circle with your finger till the test finishes. On the last test it will fail so just click on "fail".
PrincePadraic1 said:
Does anyone know how to remove 50% battery limit on V60 Retail Demo Unit? The device is great otherwise, but 50% sucks :/
Click to expand...
Click to collapse
I imagine that you already found a way to load it to 100 and even to put another firmware at this height, right!
ZoldierZ21 said:
Imagino que ya encontraste una manera de cargarlo a 100 e incluso de poner otro firmware a esta altura, ¡verdad!
Click to expand...
Click to collapse
HOLA COMO PUDISTE SOLUCIONAR ME URGE HACERLO ESTE 50% APESTA AYUDAME POR FAVOR.
Related
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
First, this method should work for all Optimus One variants. P500, P505, P506, P509, and a few others
Second, a couple corrections, if you don't mind...
Step 3: ... type down the serial number... This is incorrect. This should be IMEI number. IMEI and Serial are two different things.
Step 4: ... Emergency mode!! in a green background... Emergency mode has a Yellow background and "Emergency Mode" printed on the screen in Red.
Third,
When something goes wrong, the device will first attempt to boot to recovery. If it can't boot to recovery for whatever reason, then the device will reboot to fastboot mode. From here there are other options, not just KDZ. KDZ should be the last line of defense as it has bricked many Optimus One's and it's variants. If the device drivers had been previously installed correctly to a Windows PC, then fastboot.exe or any GUI tool for fastboot.exe can flash a recovery that can then be used to repair/replace the device's OS. Linux/Unix users don't need drivers to communicate with USB devices, only a 51-android.rules file and a fastboot executable for Linux/Unix.
Don't take what I've said the wrong way. I'm not trying to shoot your guide down. This is the kind of activity that is encouraged at XDA not discouraged I just wanted to inform you that there are other options.
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
karan.scorpion said:
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
Click to expand...
Click to collapse
hmm..did you try wipe data and wipe cache partition and re install g-apps??
shinobisoft said:
First, this method should work for all Optimus One variants. P500, P505, P506, P509, and a few others
Second, a couple corrections, if you don't mind...
Step 3: ... type down the serial number... This is incorrect. This should be IMEI number. IMEI and Serial are two different things.
Step 4: ... Emergency mode!! in a green background... Emergency mode has a Yellow background and "Emergency Mode" printed on the screen in Red.
Third,
When something goes wrong, the device will first attempt to boot to recovery. If it can't boot to recovery for whatever reason, then the device will reboot to fastboot mode. From here there are other options, not just KDZ. KDZ should be the last line of defense as it has bricked many Optimus One's and it's variants. If the device drivers had been previously installed correctly to a Windows PC, then fastboot.exe or any GUI tool for fastboot.exe can flash a recovery that can then be used to repair/replace the device's OS. Linux/Unix users don't need drivers to communicate with USB devices, only a 51-android.rules file and a fastboot executable for Linux/Unix.
Don't take what I've said the wrong way. I'm not trying to shoot your guide down. This is the kind of activity that is encouraged at XDA not discouraged I just wanted to inform you that there are other options.
Click to expand...
Click to collapse
Thanks for the corrections sir. its alright.. my mistake sir..
Serial number
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
andeedee said:
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
Click to expand...
Click to collapse
Is it the same IMEI number behind the battery?
apvm said:
Is it the same IMEI number behind the battery?
Click to expand...
Click to collapse
Hi. Yes it is the one one the LG sticker under the battery. I have tried it with the hyphens and without, and have tried the phone model as P500 and P500h.
Thanks
It work with the rom 4.4?
Gianlucafabris said:
It work with the rom 4.4?
Click to expand...
Click to collapse
It is running Android 2.3.3 (is that what you were asking?)
andeedee said:
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
Click to expand...
Click to collapse
uhm.... sir you probably need a internet connection for it to be able to work...
voltaire23 said:
uhm.... sir you probably need a internet connection for it to be able to work...
Click to expand...
Click to collapse
Yep. Thanks. I am using the same computer and internet connection that I am using to make this post, so definitely not the issue.
Will it make any difference that I am trying this from New Zealand? Is it country specific? Or should it just work no matter where you are?
andeedee said:
Yep. Thanks. I am using the same computer and internet connection that I am using to make this post, so definitely not the issue.
Will it make any difference that I am trying this from New Zealand? Is it country specific? Or should it just work no matter where you are?
Click to expand...
Click to collapse
''it just work no matter where you are'' ... it does everywhere sir.. ) :victory:
__
help ;(
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
Will this work for my lg l9? it says security error?
I tried to do this but with my lg l9 (security error)
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
I got this?
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
I get this? or is there a different way for a lg l9 security error?
I tried to do this but with my lg l9 (security error)
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
I got this?
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
I get this? or is there a different way for a lg l9 security error?
help ;(
karan.scorpion said:
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
Click to expand...
Click to collapse
It says my phone is not found?? Everytime i plug in my phone into s/w upgrade (download moad) on the device manager it says lge mobile modem?
swaggyp said:
Will this work for my lg l9? it says security error?
Click to expand...
Click to collapse
Im not sure.. but I think it will not work on p760. Sorry for late reply sir.
Help help pleaseee
I also have a problem like this, and at the same bootloop "fastboot mode started udc_start ()". So I followed the tutorial as you post. It's just that there is a problem at the last moment, that is the error message by KDZ (like in the picture), whereas in the log is written "FINISHED" but instead restart my phone to fastboot mode (after previously being in emergency mode) and nothing happened.
Earlier after I remove the error message, there is a new log message after the "FINISHED". Is there someone who can give me help? :angel::angel::angellease !!! Until now my LG still brick do not know how what I can do.......:crying::crying::crying::crying:
Recently I brick my lg p500 while reboot in amon ra thunder G recovery . due I have stock ROM already installed I just unrooted phone and went to service center at Bharuch India. They told me it is easier for them to repair and make it working . because we have no opportunity to use now kdz and there no way to save it .
So anyone please tell me the minimum cost of repair asked by lge repair center.
Here they asked me to give 250 INR. I was shocked in greb my phone and ran away from shop because I have not even 10 INR. :crying:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
niral.naik said:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
Click to expand...
Click to collapse
Can you access the recovery or the system?
I didn't understand from your post.
I can only open fastboot mode but can't detected by PC and second I open emergency mode.
When I don't do any thing phone boots normally as shown in PC detected all modem and other due i installed all drivers properly but reality is phone sticks at Build : RA - THUNDERG -3.0.6-GNM
So I cannot do access any of above
If you want to know whole process before the brick I can tell you
niral.naik said:
If you want to know whole process before the brick I can tell you
Click to expand...
Click to collapse
It will be great, however I'll answer tomorrow.
Haven't been getting much sleep this week, and it's past midnight here, I may fall asleep standing at any moment now.
But you can post the whole process right now if you wish, perhaps someone else will be able to help you by then.
Process before p500 brick!
My p500 was running on stock ginger bread v20d version. As we all know it has ugly android animation so i added boot animation zip file and added a file from cm10.1's media folder to run boot animation .Recovery was Amon Ra thunder G.
I was trying to update busybox through just their free apk (available on play store) . so I was installing it I select advance option and also choose non recommend applets . I found after finishing installation my phone was take more time to wake from screen off . I understand that I made a great done .because nothing like this was happened before in stock ROM . I tried to reboot it but stuck at my own added custom animation . as usual I try to go to recovery and delete this animation file . but now I stuck recovery start up text BUILD :RA THUNDER GNM.
God of android come here to help me please
I do not have 250 Rupees to pay them .?
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
moriel5 said:
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
Click to expand...
Click to collapse
Sir Please post link if possible . Thanks in Advance.
niral.naik said:
Sir Please post link if possible . Thanks in Advance.
Click to expand...
Click to collapse
I have kdz app with all drives but not have image files.
niral.naik said:
I have kdz app with all drives but not have image files.
Click to expand...
Click to collapse
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
So did you manage to fix the issue?
moriel5 said:
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
Click to expand...
Click to collapse
Thanks so much. You saved me Sir . You are great.
moriel5 said:
So did you manage to fix the issue?
Click to expand...
Click to collapse
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
niral.naik said:
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
Click to expand...
Click to collapse
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
moriel5 said:
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
Click to expand...
Click to collapse
So will it work for Indian p500 with no cellular provider restrictions?
niral.naik said:
So will it work for Indian p500 with no cellular provider restrictions?
Click to expand...
Click to collapse
It should work with with all P500's, restrictions or no restrictions, it doesn't matter.
I will test on this Sunday. When my laptop comes to home. By the way if it works I promise I will give you 100 Rupiya as donation.
Steps:
1. Turn Off Any Virus Protection Software
2. Download MP26010j_00_0316.kdz To Flash Your Phone Back To Stock
3. Install LGMobileDriver_WHQL_Ver_4.2.0.exe
4. Next Install LGUP_Store_Frame_Ver_1_14_3.msi
5. Make Sure That You Have Your Phone Connected (Take Battery Out Then Put It Back In Hold Volume Up And Connect With Micro USB) So LGUP Can Be Able To Recognize It
6. Then Double Click UPPERCUT.exe to open up LGUP Now But Only Thing Is That Uppercut will try to verify just ignore and if it doesn't open up just open lgup from desktop and its going to view phone as unknown
7. Unplug Phone But Keep LG Download Mode On And Exit LGUP
8. Open LGUP First And Then Connect Phone Which Should Recognize Phone As MP260
9. Click Upgrade, Make Sure That Bin Is Checked And Select File MP26010j_00_0316.kdz To Flash And Click Start
10. Your Done! Video Coming Soon
Links: https://mega.nz/#!EZcURRSD!NF_5MU4dJUpTknRcPMQWFVoYo4ePsGkoA0ndkkzVsmI https://mega.nz/#!dFNWFZZa!Rl3P7tJs7J51TtjcnaLwR3RHgGdRSco8NcJ9yog86J0 https://mega.nz/#!oVNSnYTB!3y9-P4t_8P-lj5sCXhFjO0R8J3j4Z_US-XCjVGysgEI https://mega.nz/#!pAUgGAwC!j5d3C8pUdQR5XMpqWBgLDu2O3tE99yWNa2nwXud3OSo
The Only Thing Im Disappointed Is That Every Time You Reboot Phone or Turn It On It Keeps Saying Lock Bootloader But Just Press The Power Button To Continue Repeating The Process Does Not Remove That Message
I Made This Tutorial For Some People That Have Trouble With Apps That Detect Root
Phone dont turn on at all
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
shaneg79 said:
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
Click to expand...
Click to collapse
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
New Optimus said:
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
Click to expand...
Click to collapse
Correct but this thread was about removing root
shaneg79 said:
Correct but this thread was about removing root
Click to expand...
Click to collapse
ah, I thought that was in the original post or implied if completely unrooting.
New Optimus said:
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
Click to expand...
Click to collapse
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
meazz1 said:
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
Click to expand...
Click to collapse
Here
kc6wke said:
Here
Click to expand...
Click to collapse
Thanks
meazz1 said:
Thanks
Click to expand...
Click to collapse
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
meazz1 said:
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
Click to expand...
Click to collapse
Not sure about TMI, use TMO North America
I figured I'd post this here to, because I am thinking about getting this phone. It's $99 at metro pcs right now, that's really hard to pass up.
In a twrp+root thread there are some that cannot get root, with the last LG firmware update, so I'm guessing this is a soft brick as apposed to a hard brick.
So, had a question.
If in the case of the like 10% of the people that do this root, the phone won't root or bricks, if I get this phone and and that happens, is it possible to flash the phone via the LG program, with a KDZ file and go back to stock like in this thread? If so I will probably buy this phone tomorrow (crosses fingers the kdz trick will work)
From looking at the videos, it looks as if the LG program is similar to the Samsung Odin program as far as flashing goes, am I correct in this?
...
Sent from my [device_name] using XDA-Developers Legacy app
I know this thread has not been active for a while. However I have a Metro LG K20 Plus phone and want to change the firmware to T-Mobile. I have not been successful doing this as I always get invalid firmware, because LG UP recognizes the phone as a metro phone. Is there a way to succeed in getting the T-Mobile firmware on the phone?
thanks in advance.
Stoner101 said:
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great
Click to expand...
Click to collapse
Did you find any answers to this? I have one that is bricked. It will not show up when connected to a computer at all
Virus warning from Avira in Uppercut
lg k20 plus soft bricked?
So I've searched high and low and have tried suggestion after suggestion with no avail. To start things off, I have a soft bricked LG k20 plus. Everything was working fine until the other day when I went to flash a kernel, and when the phone restarted, the screen was a dark grey/black color. I rooted the devices using massis method, removed SU and then rooted using Magisk. Like I said everything was working fine and for whatever reason I decided to try a different kernel. That's when it all went downhill. So now when I turn the phone on, the screen is still blank but it vibrates. When I've connected it to a computer, on my Mac it doesn't show up with ADB or FASTBOOT but in my device tree it comes up as LGE Android device. I borrowed my friends laptop since it runs windows, and my Mac is a dinosaur. ADB doesn't pick it up either, but in a USB hub it says the same thing, LGE Android device and lower down it comes up as TP-LINK. Now tryin to use LG Flash tools doesn't work, LGUP doesn't see my device, and when I tried to extract the KZD file, when I go to select it from the list there is no file to choose. Since I can't see anything on my screen, I can't tell if I'm in download mode, bootloader, etc, but in my device tree sometimes my phone will pop up an bootloader interface and I can use fastboot commands. When I was last able to see my screen, yes, USB debugging was on, I had a recovery, but since I can't see anything on my screen I can't seem to boot into recovery. If I could I would wipe cache and all. I think I may have read too many article and suggestions as to what to do because nothing seems to be working, and don't seem to find anything else related closely enough to my issue. Anyone have a clue as to where I should start? I'll have to give my friend back her laptop soon, and since my mac is so old, and the whole PC vs Mac feud, my computer won't be of much help. Any advice my hair strands would greatly appreciate before they rest are pulled out lol
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Nope for 870DS Indonesia
Cheers
RooBG said:
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Click to expand...
Click to collapse
Can we flash it on indian DS model?
Sent from my LG-H870DS using Tapatalk
Any others recived oreo ?
Now V20a-HKG-XX.
mohammadstr said:
Any others recived oreo ?
Click to expand...
Click to collapse
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
ppp10 said:
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
Click to expand...
Click to collapse
same for me. Only update with LG Bridge :/
H870DS SEA
Any news for H870DSU lg g6+
i need kdz can some one upload it for me?
mahmoudxcom said:
Any news for H870DSU lg g6+
Click to expand...
Click to collapse
It's out too ..
U can flash it by lgup ..
Check this one https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
---------- Post added at 07:20 AM ---------- Previous post was at 07:16 AM ----------
mohammadstr said:
i need kdz can some one upload it for me?
Click to expand...
Click to collapse
https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
not working at all. website doesnt give any link, and it seems like its a paid service
They could add V30 quad dac extra feature on our G6.?
sagor1 said:
They could add V30 quad dac extra feature on our G6.
Click to expand...
Click to collapse
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
mohammadstr said:
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
Click to expand...
Click to collapse
Same thing goes for s7 edge & s8.
But Samsung add every software features from s8 to s7 edge on oreo.
They even frequently update their built in apps.
sanzharis said:
not working at all. website doesnt give any link, and it seems like its a paid service
Click to expand...
Click to collapse
In this site site you can not only see any update to H870DS, as well as to download the installation package:
https://lg-firmwares.com/lg-h870ds-firmwares/
Updated mine a while ago. So far so good!
H870DS HKG-XX v20a
No ota, via LG Bridge
Updated my H870DS-TWN a few days ago, clean install via LG bridge.
No problems and nothing really extraordinary, except maybe the ability to hide the nav keys, which is less useful than I used to think. When hidden, you have to make one extra move to bring them back. Using a third party gesture control app solves the problem.
Has anyone noticed any change in battery performance or idle standby drain since updating their H870DS to Oreo? Additionally, has anyone found any problems or issues on this model since updating? I also have Taiwan version and want to check that the update is stable before I pull the trigger on it.
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
swasha123 said:
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
Click to expand...
Click to collapse
I had the same issue while using (with lg up and uc) Singapore rom on my indian lg DS last night and managed to recover successfully.
I made it to switch to download mode immediately after resetting while in stuck welcome screen.
Steps.
1. Keep pressing power + volume d to reboot.
2. Immediately press volume up while the usb is inserted and your official lg bridge running in your laptop and set to flash recovery mode.
3. LG bridge should recognise and start downloading the latest firmware from server and flash on your phone.
4. You may need to do factory reset after a successful flash n reboot because it might throw exceptions after booting (mine had from the process settings).
LG G6 Unbrick
First Thing First: If you try this method, I nor anybody else is responsible
for any further damage done to your phone.
!!!YOU CANNOT FLASH THIS TO AN H872!!!
If you have destroyed the partitions, you are going to have to try Method 2 (Second Post)
Models Confirmed: LS993, H871, H870ds, H870, AS993
READ THE ENTIRE GUIDE OVER BEFORE STARTING
Files needed:
All Here : https://drive.google.com/open?id=1OQnP2tu7hqlR0tbEdxLnzj_xOx12Ndvu
CLICK “DOWNLOAD ALL” IN TOP RIGHT CORNER
Working KDZ for your model : https://lg-firmwares.com/
UNBRICK PROCEDURE:
(DO NOT CONNECT PHONE UNTIL STEP 6)
Step 1) Download Files ---> Duh, lol
Step 2) Install QDLoader Driver (Select the driver for your system, 32 or 64-bit)
Use The new Signed driver.
Step 3) Extract AS993 to a folder. Any folder will work.
Step 4) Copy FireHose to same folder as AS993.
Step 5) Extract Qualcomm_Flash_Image_Loader_v2.0.1.9 to any folder.
Step 6) Start QFIL.
Under “Select Build Type” Select “Flat Build”
Under “Select Programmer” click “Browse”
Browse to the AS993 folder you created earlier and select the Firehose, hit open
In the Title Bar, click Configuration ->FireHose Configuration
Uncheck every checkbox, choose “Sahara” in Download Protocol dropdown, and “ufs” in
Device Type dropdown
Hit OK
Under “Select Flat Build” click “Load XML”
Browse to AS993 folder and select every rawprogram XML and hit open.
A windows will pop up asking to select Patch XML, Select every Patch XML, and hit open.
Connect Phone and click Download
If you encounter an error, try to reboot the phone and try download again
(Hold Vol Down + Power until you see COM port disappear and show up again)
Wait for download to finish.......
Phone will reboot to Fastboot
Step 7) Install LGUP_Store_Frame_Ver_1_14_3
Step 8) Extract LGUP Patch rar to rogram Files:\LG Electronics\LGUP
Put Phone into Download Mode (Unplug Phone → Turn phone off → Hold Vol Up → Plug Phone In)
Step 9) Run LGUP
In Model List window choose your phone and click Select
Under “Process” Select “Partition DL”
Under “File Path” to the right of “Bin File” click the button with 3 periods
Select your working KDZ
Click Start
A window will pop-up with partitions. Check select all, and then OK
Another window will pop-up explaining which partitions will change, click Yes
Wait for Flash to complete.......
!!!AFTER RESTART, YOU MUST FACTORY RESET!!!
To Perform Factory Reset Do The Following:
HOLD VOL DOWN + POWER, AS SOON AS YOU SEE BOOT SCREEN, RELEASE POWER BUTTON FOR A MOMENT, THEN CONTINUE HOLDING POWER AND VOL DOWN.
!!!DO NOT RELEASE POWER OR VOL DOWN BUTTONS UNTIL FACTORY RESET MENU APPEARS!!!
Use VOL UP\DOWN to choose to complete Factory Reset, then hit Power Button to perform Factory Reset.
CONGRATULATIONS! YOUR PHONE IS NOW UNBRICKED!
ScreenShots to Come, and Edits to be made.
Edit: H870ds, H870 and AS993 added to working models
Removed old drivers from Google Drive for simplicity.
Reserved
Thank bro
LGM-600l
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Is us988 work?
jascharichter said:
Is us988 work?
Click to expand...
Click to collapse
Although it has not been tested, there is no reason it shouldn't work. The worse that could happen is you're stuck in the same situation.
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Yep. Have at it. But, like always, I don't recommend purposely bricking.
I should mention that you don't need to use the xml stuff.
In QFIL in one of the top menus, there's a partition option, where it reads the gpt from the phone and you can select them and flash individual files. So you can flash directly bootloader
or whatever you need from your proper kdz source.
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
inbox me
Dylan110494 said:
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Click to expand...
Click to collapse
inbox me inbox me
jthein1989 said:
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
Click to expand...
Click to collapse
I'm sorry. I have been extremely busy lately. I will let you know when I get them done.
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Did you try it yet?
I'm also trying to fix a dead Canadian H873 (Videotron Carrier). Had tried my hand in the past at creating the patch.xml and rawprog0.xml (one method had me peek at the gpt files using an excel/libreoffice spreadheet) but failed for various reason also not having a proper programmer file didn't help any.
For those that encounter issues with either the programmer file failing or getting sahara fail FHLoader, something like cannot find system file try this:
1. Make sure to reboot phone and hit download to phone in QFIL right away. On my device sahara seemed to be timing out quickly.
2. For the second error using the QFIL included with QPST 2.7.474 fixed it.
Sadly i tried to refresh the phone using the backup files i was given with it but now it doesn't get detected. Holding power button the phone vibrates and nothing else happens. Tread lightly.
So good news the programmer file works (tried it on a H873 Videotron variant), bad news do it right the first time or else.
Time to start searching for a way to force it back into edl.
draekko said:
Time to start searching for a way to force it back into edl.
Click to expand...
Click to collapse
To clarify i used a backup of the files i had on hand for the device and not the files provided by OP.
Hi everyone, I have just bricked my G6, hard brick I think ( does not charge, cant get into download mode, cant hard reset either, only show Qualcomm qloader 9008"). This happened after I tried cross flashing it from LS993 to H872 ( I now know that a NO NO ). Can someone here help me on how to get it back to life ? I ve read quite a lot of different topics but the more I research the more confused I am. Some say I need to restore to stock firmware, but there is no stock firmware for LS993... Any help would be greatly appreciated and I hope you have a very great day
Read my method, download the files, read it again, and follow the steps.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
I did but I am still so confused. Can you please tell me which firmware should I download and the firehose to use too. I think I understood most of the post here, except those 2 things: kdz and firehose.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
---------- Post added at 08:53 AM ---------- Previous post was at 08:39 AM ----------
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
Hi!
I am trying to follow the steps shown but my computer do not recognize my H870 in "select" port :/
any idea?
thank you very much