Hi.
Unfortunately i flashed a Android OS system software, while tablet was rooted. It failed. So now I cannot boot into recovery on it A7600-f. My PC computer will not find the tablet when connecting with a USB cable. System will not load on the tablet. It will not go into recovery either when I press "Power+volume up" and choose recovery. Only option is to go into fastboot. However it does not work proberly either! So I think it's lost, or do you know how to solve this?
I have also tried SP Flash tool, but again the tablet is never recognized
However when I go in to fastboot by holding "Power +volume up" down, I write: fastbott devices on my pc. Then the proper name of the tablet comes up:
C:\... fastboot devices
mt6582_phone fastboot
However when trying to flash a stock rom system.img in fastboot I'm stuck at "Erasing" system... and no OKAY comes. Or when I try to boot boot.img from a stock recovery in fastboot it never says ok, only booting..... So I think my fastboot is not working right:
c:\adb>fastboot boot boot.img
downloading 'boot.img'
OKAY [ 0.170s]
booting....
And that's it.. after booting... no OKAY comes and CMD freezes.
So anybody knows how to solve this? How to get my tablet back with a android OS system?
Thanks for any help I can get.
Br.
Kim
PS. Cant post pictures since I have not had 10 posts yet.
I ported TWRP using Android kitchen to flash to my device (Coolpad 801es) since there isn't an official version. For some reason, I can't seem to get fastboot to play nice with my phone (see my earlier post) so I used flashify. On reboot i'm stuck in a bootloop. I did have the foresight to back up my stock recovery with flashify and transfer it to my PC first, in case something went wrong. Now, I can't boot into recovery at all and ADB isn't working since the phone isn't being recognized by my PC when I plug it in. I just want to flash the stock recovery back and fix this. I can get into fastboot, and the PC does recognize the phone in fastboot, but when I try any commands it just hangs at waiting for device. I've googled but every solution i've seen for fixing a bootloop tells you to boot into recovery to do so.
Can someone please help me out?
UPDATE:
Upon further research, I discovered the reason fastboot commands weren't working is because my phone apparently isn't whitelisted in the fastboot exe. However, if I type Fastboot followed by -i 0x1ebf the commands seem to work. Using this method, fastboot devices lists my phone and fastboot reboot reboots the phone.
I think i'm on the right track, but when I try "Fastboot -i 0x1ebf flash recovery (path to recovery.img)" the terminal shows "sending 'recovery' (10240kb)..." and nothing else. No progress indicator, and i've waited 10 minutes for it to complete which should be more than enough time to flash a 10 meg file, but there's no change it just sits there. Like I said, I think i'm on the right track but I could REALLY use some help. I can't be the first person on here with this problem. Can someone, anyone, PLEASE help me.
So, more Googling would indicate that either i'm not using the correct USB port, or that my bootloader is locked. I have tried all the USB ports on my PC (front and back) as well as two different cables, no joy. As far as the bootloader being locked, the phone is rooted which I thought meant that the bootloader is unlocked as that is part of the rooting process. I try "Fastboot oem unlock" to check but I just get "failed remote no such command unlock" and there is no OEM option under developer options on this phone. I'm trying to piece this together but I could really use some help.
Hi
I have a xiaomi mi a2 lite, and I was trying to install lineage os on it, but failed.
Now, the phone only enter into fastboot, and when i press off button for long, it restarts and go into fastboot again.
there is no custom recovery, it says no command.
The last thing that I did to try to save my phone was, to download the stock fastboot rom, and run its flash_all.bat.
What can I do now please? I have got a feeling that there are some partition missing or it doesn't know how to boot into the correct partition.
So, I recently tried to root my Redmi 5 phone and install Lineage OS into it. This is my first time doing it, so I believe I may not have understood the words I had been reading well. Due to this, I'll try to be as descriptive as possible with the actions I had taken that led to my device being stuck.
I had followed this guide, for the most part: https://www.getdroidtips.com/lineage-os-17-xiaomi-redmi-5/
As per the guide, I performed the following actions:
Enabled the developer options
Registered my device to my Mi account
Enabled USB debugging, OEM unlocking
Rebooted in fastboot mode using the ADB tools through CMD (adb reboot bootloader)
While in fastboot mode, I used the Mi Unlock tool to unlock my device.
As per my understanding, these steps would unlock the bootloader. I rebooted my device, set it up (the phone behaves as if freshly booted) and checked the settings menu after enabling developer options again. It shows the bootloader is already unlocked and that Mi Account status is also unlocked. I enabled the USB debugging options again and carried on with the guide.
I then downloaded the rosy TWRP file (version 3.5, I think).
I even downloaded GApps and Lineage 18.1 OS
I tried to copy the above files into my Redmi 5 internal storage
The Lineage and GApps file failed to copy, but I was able to copy the TWRP file
One thing to note here, I am not sure if my USB cable is faulty or if my phone's micro USB port is faulty or if my laptop's USB ports are faulty. When the phone is connected to my PC, it is extremely lousy. If I shake the cable even a bit, it disconnects and reconnects. When I try to use the file explorer to copy the files from my laptop to the android phone, it usually fails for large files or large quantities of small files. I believe this was the reason behind the failure. Nonetheless, I decided to do the TWRP part first.
The guide said to reboot in recovery mode and that would take me to TWRP recovery mode. Well, it did not! It took me to a menu that had the following options:
Reboot
Reboot to System
Back to Main Menu
Wipe Data
Wipe All Data
Back to Main Menu
Connect to MIAssistant
I assumed I had entered recovery mode incorrectly, so I followed the link in the guide on how to enter recovery mode. It suggested using the ADB tools.
I used the command: adb reboot recovery
It did the same thing that I had done. So, I assumed that that is the recovery mode, but I am unable to enter TWRP recovery mode. There was another link that would show me how to do this.
I followed that link and downloaded the files that was mentioned. However, the guide tells little to nothing on what to do with these files. The only file that was used was the rosy twrp file.
I enabled the USB debugging mode on my phone.
Opened CMD from the folder with ADB
Entered the command: adb reboot bootloader
Phone enters fastboot mode
Entered the command: fastboot devices
I can see that a device is connected
Entered the command: fastboot flash recovery rosy-3-5.img (I renamed it for convenience, I believe that was allowed because every website had different name for their file)
I then rebooted into recovery mode by first rebooting it normally: fastboot reboot
Then entering the command: adb reboot recovery
It still showed the same old recovery menu. Nothing had changed. I looked around the internet and found that I could boot with the TWRP image by entering the command: fastboot boot rosy-3-5.img
This opened the screen that I was expecting, but it did not open the chinese menu at all. It directly went to the screen that had options such as Install, Wipe, etc.,
I rebooted normally and then tried to transfer the GApps file and Lineage file into my phone. As usual, it was failing. I tried to use the adb push command and it still failed but with an error saying "permissions denied"
At this point, I looked up how to get root permissions and I learnt that I had to root my device. I looked up how to root with Magisk and SuperSU. The guides all required me to boot in TWRP recovery and then install the files from my phone. Unable to transfer the files to my phone, I uploaded the files to my google drive, and manually downloaded into my phone. I boot up rosy (TWRP recovery, or so I think) using ADB tools. Unfortunately, it does not recognize any of the files in my internal storage. Everything is empty.
Defeated by this, I decided to let it go. I had a factory reset Redmi 5 at the time. I then watched a video that showed how to root with Magisk, but wasn't specific to Redmi 5, it was a generic video for android devices.
I installed the magisk manager apk into my android phone.
Then I copied the boot.img file from the Lineage folder into my android device. Despite the OS being 600 MB large, the boot.img file was only 11 MB.
Anyway, I patched the boot.img file using magisk manager.
It created a file called magisk-patched_1pTOD.img (I'm a bit unsure of the name, but it was similar to that).
The video said that I should copy this file into my laptop and then reboot my phone into fastboot.
Once in fastboot, I had to enter the command: fastboot flash boot magisk-patched_1pTOD.img
I believed that this would root my device and grant me root access. I don't know what my actions were actually supposed to do, but my device is unusable for all intents and purposes. I rebooted the device and it shows the Mi logo for a brief moment and there's no light. An empty dark screen, it's not even a black screen. It's like the display fails to work. I can switch into recovery mode and into fastboot mode but normal reboot did the same.
Thinking that I bricked my phone, I tried to unbrick it.
I downloaded the fastboot rom for Redmi 5 rosy and then installed the Mi Flash tool along with the drivers for it.
I then selected the correct ROM folder (it kept showing up as can't find flash script until I was in the right folder for it)
Rebooted my phone into fastboot mode
Hit refresh on the Mi Flash tool
It showed my device
I chose Clean All option
I hit flash
It goes up till 97%-ish and then fails with an error saying "flash system error".
However, I noticed that now, I can see that the Mi Logo doesn't disappear now. I can still go into recovery mode and fastboot mode, but normal reboot takes me to the permanent Mi Logo Screen. I cannot even shut it down. It auto reboots to the Mi Logo Screen if I do so.
I connected my device to my laptop and then opened the ADB tools.
I entered the following command to see if it's recognized by adb:
adb devices
It did not. I then switched to fastboot mode manually by pressing the Vol Down and Power buttons.
Then entered the following to see if it is recognized in fastboot mode:
fastboot devices
It showed my device there. So I used the following command to reboot and see if it is recognized in fastboot again:
fastboot reboot
While it shows the Mi Logo screen, I typed the command:
fastboot devices
It still shows my device.
I concluded that my device is in an infinite fastboot loop. I cannot boot it up normally. I cannot flash the Redmi 5 ROM into it either. I cannot use my phone.
If anybody has actually gone through this entire mess that I made, and has figured out what went wrong or at least how to fix it, please help me.
Message me on telegram @benzoylperoxide
Hope I could help you with this situation.
If you got data, download fastboot rom based on nought and fastboot rom 9.5.30
Download latest miflash tool from miglobe website.
Install proper drivers from miunlock tool zip file.
And Hope for the best.
Ping me tommorow at anytime.
Good night Bro
incertam7 said:
So, I recently tried to root my Redmi 5 phone and install Lineage OS into it. This is my first time doing it, so I believe I may not have understood the words I had been reading well. Due to this, I'll try to be as descriptive as possible with the actions I had taken that led to my device being stuck.
I had followed this guide, for the most part: https://www.getdroidtips.com/lineage-os-17-xiaomi-redmi-5/
As per the guide, I performed the following actions:
Enabled the developer options
Registered my device to my Mi account
Enabled USB debugging, OEM unlocking
Rebooted in fastboot mode using the ADB tools through CMD (adb reboot bootloader)
While in fastboot mode, I used the Mi Unlock tool to unlock my device.
As per my understanding, these steps would unlock the bootloader. I rebooted my device, set it up (the phone behaves as if freshly booted) and checked the settings menu after enabling developer options again. It shows the bootloader is already unlocked and that Mi Account status is also unlocked. I enabled the USB debugging options again and carried on with the guide.
I then downloaded the rosy TWRP file (version 3.5, I think).
I even downloaded GApps and Lineage 18.1 OS
I tried to copy the above files into my Redmi 5 internal storage
The Lineage and GApps file failed to copy, but I was able to copy the TWRP file
One thing to note here, I am not sure if my USB cable is faulty or if my phone's micro USB port is faulty or if my laptop's USB ports are faulty. When the phone is connected to my PC, it is extremely lousy. If I shake the cable even a bit, it disconnects and reconnects. When I try to use the file explorer to copy the files from my laptop to the android phone, it usually fails for large files or large quantities of small files. I believe this was the reason behind the failure. Nonetheless, I decided to do the TWRP part first.
The guide said to reboot in recovery mode and that would take me to TWRP recovery mode. Well, it did not! It took me to a menu that had the following options:
Reboot
Reboot to System
Back to Main Menu
Wipe Data
Wipe All Data
Back to Main Menu
Connect to MIAssistant
I assumed I had entered recovery mode incorrectly, so I followed the link in the guide on how to enter recovery mode. It suggested using the ADB tools.
I used the command: adb reboot recovery
It did the same thing that I had done. So, I assumed that that is the recovery mode, but I am unable to enter TWRP recovery mode. There was another link that would show me how to do this.
I followed that link and downloaded the files that was mentioned. However, the guide tells little to nothing on what to do with these files. The only file that was used was the rosy twrp file.
I enabled the USB debugging mode on my phone.
Opened CMD from the folder with ADB
Entered the command: adb reboot bootloader
Phone enters fastboot mode
Entered the command: fastboot devices
I can see that a device is connected
Entered the command: fastboot flash recovery rosy-3-5.img (I renamed it for convenience, I believe that was allowed because every website had different name for their file)
I then rebooted into recovery mode by first rebooting it normally: fastboot reboot
Then entering the command: adb reboot recovery
It still showed the same old recovery menu. Nothing had changed. I looked around the internet and found that I could boot with the TWRP image by entering the command: fastboot boot rosy-3-5.img
This opened the screen that I was expecting, but it did not open the chinese menu at all. It directly went to the screen that had options such as Install, Wipe, etc.,
I rebooted normally and then tried to transfer the GApps file and Lineage file into my phone. As usual, it was failing. I tried to use the adb push command and it still failed but with an error saying "permissions denied"
At this point, I looked up how to get root permissions and I learnt that I had to root my device. I looked up how to root with Magisk and SuperSU. The guides all required me to boot in TWRP recovery and then install the files from my phone. Unable to transfer the files to my phone, I uploaded the files to my google drive, and manually downloaded into my phone. I boot up rosy (TWRP recovery, or so I think) using ADB tools. Unfortunately, it does not recognize any of the files in my internal storage. Everything is empty.
Defeated by this, I decided to let it go. I had a factory reset Redmi 5 at the time. I then watched a video that showed how to root with Magisk, but wasn't specific to Redmi 5, it was a generic video for android devices.
I installed the magisk manager apk into my android phone.
Then I copied the boot.img file from the Lineage folder into my android device. Despite the OS being 600 MB large, the boot.img file was only 11 MB.
Anyway, I patched the boot.img file using magisk manager.
It created a file called magisk-patched_1pTOD.img (I'm a bit unsure of the name, but it was similar to that).
The video said that I should copy this file into my laptop and then reboot my phone into fastboot.
Once in fastboot, I had to enter the command: fastboot flash boot magisk-patched_1pTOD.img
I believed that this would root my device and grant me root access. I don't know what my actions were actually supposed to do, but my device is unusable for all intents and purposes. I rebooted the device and it shows the Mi logo for a brief moment and there's no light. An empty dark screen, it's not even a black screen. It's like the display fails to work. I can switch into recovery mode and into fastboot mode but normal reboot did the same.
Thinking that I bricked my phone, I tried to unbrick it.
I downloaded the fastboot rom for Redmi 5 rosy and then installed the Mi Flash tool along with the drivers for it.
I then selected the correct ROM folder (it kept showing up as can't find flash script until I was in the right folder for it)
Rebooted my phone into fastboot mode
Hit refresh on the Mi Flash tool
It showed my device
I chose Clean All option
I hit flash
It goes up till 97%-ish and then fails with an error saying "flash system error".
However, I noticed that now, I can see that the Mi Logo doesn't disappear now. I can still go into recovery mode and fastboot mode, but normal reboot takes me to the permanent Mi Logo Screen. I cannot even shut it down. It auto reboots to the Mi Logo Screen if I do so.
I connected my device to my laptop and then opened the ADB tools.
I entered the following command to see if it's recognized by adb:
adb devices
It did not. I then switched to fastboot mode manually by pressing the Vol Down and Power buttons.
Then entered the following to see if it is recognized in fastboot mode:
fastboot devices
It showed my device there. So I used the following command to reboot and see if it is recognized in fastboot again:
fastboot reboot
While it shows the Mi Logo screen, I typed the command:
fastboot devices
It still shows my device.
I concluded that my device is in an infinite fastboot loop. I cannot boot it up normally. I cannot flash the Redmi 5 ROM into it either. I cannot use my phone.
If anybody has actually gone through this entire mess that I made, and has figured out what went wrong or at least how to fix it, please help me.
Click to expand...
Click to collapse
Flash system error in MiFlash? Probably the stock rom you downloaded and extracted is corrupted.
Please try flashing MIUI 9 for your Redmi 5.
Yeah, users have had issues with twrp being replaced by stock rom.
For TWRP,
fastboot flash revovery (recovery name.img)
Fastboot boot (recovery name .img)
After that flash your custom rom after wiping system,boot, vendor, data and cache, Internal format might be needed if it's encrypted.
Then, after custom rom is flashed, flash gapps and then twrp zip in TWRP, yeah you saw it right, flash twrp zip in TWRP. This way, twrp won't get replaced.
You can give directly flashing TWRP and flashing custom rom the way I told, Flashing Miui isn't important if your goal is to flash custom rom.
First time poster.... please go gentle on me. Not entirely new to custom roms and TWRP, but really stuck here. I am trying to install a CrDroid ROM. Phone is not networked locked and brand new. What I managed to do so far:
1. Reset the phone
2. reboot into Recovery (Mi Recovery)
3. Wipe data
4. Unlocked the phone (using offical Mi Unlock)
I then proceeded to boot into Fastboot and flashed the TWRP (twrp-3.7.0_12-0-onclite), renamed to recovery. But after flashing and rebooting I can only get into Fastboot, or boot it normally. Holding down the Volume+Up and Power button doesn't get me anywhere but Fastboot. (Same for Volume-Down and Power Up). I tried both un-pluggin the phone from the PC immediately after flashing is finished, and using Fastboot Reboot command, but all to no avail. Its Fastboot or normal boot only.
I also tried whats suggested here upto the vbmeta image, but didn't make a difference. When sending the 'fastboot boot recovery.img' command, I get the following error:
C:\adb>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.939s]
booting...
FAILED (remote: unknown reason)
finished. total time: 1.502s
Trying this guide for a 'custom' boot image from this page also didnt help
Really hoping there is a way to get this resolved. But totally stuck here. Have access to both Mac OS and Windows 10. If anyone can point me in the right direction it would be wonderful!
Ok, small update - in hope to help others...
I went ahead and used 'XiaoMiTool V2'to see if it might help to load a different ROM. When starting the app, I choose the 'Bricked' device option, even it wasnt bricked. I choose the Global ROM 12. (The phone showed up as unknown and I didnt sign in with the Mi Account).
After the new ROM was on it, phone started normally and went through the setup. Had to re-enable Developer Options, USB Debugging, but even so it still didnt work - installing the TWRP just kept bringing me back to Fastboot.
However, the TWRP from this page did work: https://twrp.me/xiaomi/xiaomi-mi439.html
I also took no chances and held the Volume up button pressed and with the Command window open and 'fastboot reboot'typed out, hit the Enter key at the same time as pressing the Power button on the phone.
Worked for me!
Try to install PitchBlack Recovery it's very compable PBRP-pine-3.1.0 _OFFICIAL
Timesnaps said:
First time poster.... please go gentle on me. Not entirely new to custom roms and TWRP, but really stuck here. I am trying to install a CrDroid ROM. Phone is not networked locked and brand new. What I managed to do so far:
1. Reset the phone
2. reboot into Recovery (Mi Recovery)
3. Wipe data
4. Unlocked the phone (using offical Mi Unlock)
I then proceeded to boot into Fastboot and flashed the TWRP (twrp-3.7.0_12-0-onclite), renamed to recovery. But after flashing and rebooting I can only get into Fastboot, or boot it normally. Holding down the Volume+Up and Power button doesn't get me anywhere but Fastboot. (Same for Volume-Down and Power Up). I tried both un-pluggin the phone from the PC immediately after flashing is finished, and using Fastboot Reboot command, but all to no avail. Its Fastboot or normal boot only.
I also tried whats suggested here upto the vbmeta image, but didn't make a difference. When sending the 'fastboot boot recovery.img' command, I get the following error:
C:\adb>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.939s]
booting...
FAILED (remote: unknown reason)
finished. total time: 1.502s
Trying this guide for a 'custom' boot image from this page also didnt help
Really hoping there is a way to get this resolved. But totally stuck here. Have access to both Mac OS and Windows 10. If anyone can point me in the right direction it would be wonderful!
Click to expand...
Click to collapse
You are trying to install onclite (Redmi 7) recovery on pine (Redmi 7A) ???
mi439 TWRP works for me as well & even successfully flash the rom/gapps. but when it comes to rooting with Magisk, i failed to flash nor install it properly. hope someone/somebody would make a tutorial for flashing/installing Magisk.