Hey guys,
I have a problem with sync function on a amazfit Verge, I can sync without any problems but 10 minutes later the watch disconects from the phone, I tried uninstalling the app, restarting the phone, watch and keeps happening.
Im using a mate 20 btw, never had any problems with a GTR and previously I used the verge with an iphone 7 without issues
thx for any info and your time
Related
Hi everybody, since one month the Amazfit stops syncing after a while and the notifications stop working. When I reboot the Amazfit the app syncs again and everything works fine but after some hours it stops syncing and showing notifications again. I've tried stoping amazfit app, switch off and on the wifi, bt, airplane mode, even restarting the phone but the only thing working is rebooting the Amazfit.
I'm becoming desesperate, anybody with some clue?
Thankyou
joansbou said:
Hi everybody, since one month the Amazfit stops syncing after a while and the notifications stop working. When I reboot the Amazfit the app syncs again and everything works fine but after some hours it stops syncing and showing notifications again. I've tried stoping amazfit app, switch off and on the wifi, bt, airplane mode, even restarting the phone but the only thing working is rebooting the Amazfit.
I'm becoming desesperate, anybody with some clue?
Thankyou
Click to expand...
Click to collapse
Nobody? [emoji22]
Sent from my PRA-LX1 using Tapatalk
joansbou said:
Nobody? [emoji22]
Sent from my PRA-LX1 using Tapatalk
Click to expand...
Click to collapse
Hi, I had similar problem when change my android one phone with a new xioami (miui8) phone, I solved the problem by forcing amazfit app run in background (in miui task manager)
Hello! yesterday I factory reset the my watch, and didnt upload backed activity from amazfit to the watch, so now the watch is "clean". Til now it seems to work ok! No sync problems. I hope it's fixed.
Hello,
in Germany, last night clocks were adjusted at 3:00am to 2:00am due to dayliht saving. My Android phone switched the time instantly, my Amazfit BIP ignored it, even at 11 am, the time was still faulty, syncing with the Mi Fit app didn't help. The only thing that helped was to unbind and rebind the BIP to the phone
This is really a pitty, I wonder how often at all the BIP does syncronize at all, and why the people developing this piece of software are so ignorant not to implement the most obvious use-cases.
Any tips and hints how the time sync behaviour can be improved? Thanks!
Turn off and then on the Bluetooth. That's all. Works every time. I travel a lot and that's what I do to sync the time when I change timezones.
Sent from my Huawei P9 using Tapatalk Pro
A lot Xiaomi/Amazfit Products (Miband, Bip, Cor etc) has to connect one time to mifit after time change to get the right time again! I use mifit since a few years now and i‘ve never a problem with the time change!
I tried reconnecting bluetooth as well as syncing in the MiFit App, both did not help. Only unpairing and repairing solved the issue Even if these two did work, it is a shame that things like that do not work automatically out of the box...
Hello, i have same issue. Just turn off and on your bip and it solve the problem.
Restart the phone
I had same issue today and restarting the phone connected to my BIP solved the issue instantly. Hope it helps!!
4 years later and my brand new Amazfit Band 7 ignores daylight saving even after a full shutdown. Disappointing indeed because (almost) all my devices, clocks, watches use either DCF or NTP to avoid this issue in the first place.
Hai
My amazfit gtr disconnects from the phone every night and in the morning I have to restart both phone and watch more than once for them to reconnect.
I've noticed that when I charge the phone overnight watch won't disconnect.
I've turned off battery optimization on the app but still the same problem
Anyone has a solutio. For it not to disconnect every night or at least an easy way to reconnect at the morning.
Hello, I have GTR 47 and one+ 7t too and no problems with BT disconnect. Maybe it helps to connect GTR and 7t not only in the Amazfit App but in the Bluetooth settings too (add new device). And add the GTR as trusted device in trusted agents to keep phone unlocked.
I' ve just recently bought redmi note 9 pro. My amazfit watch is t-rex. Since then every time I turn on my redmi , I have to enable gps, in order to connect the t-rex with zepp app, otherwise it doesn't connect. The message that appears is in the screenshot
Same with Amazfit Bip
Had same issue with my Amazfit Bip initially when the app was released. After about a dozen connects it now allows me to sync with bluetooth only however the initial sync only loads steps counts, I have to close app fully and reload to get it to sync any sleep data.
Weird!
I simply uninstalled the app. It has become pretty useless.
DarthJabba9 said:
I simply uninstalled the app. It has become pretty useless.
Click to expand...
Click to collapse
But if I do this I wont be able to connect my t-rex with the phone any more.
SACS73 said:
But if I do this I wont be able to connect my t-rex with the phone any more.
Click to expand...
Click to collapse
True. For me, it was nothing lost, because nothing I did (other than uninstalling it and then installing it again - every time) would make it connect. It was working perfectly fine before it became zepp.
Hello all, I updated my iPhone to iOS 16 beta and my notifications are not working at all. I know there was a fix coming as an update for the Zepp app which I did (7.1.5) but I am still not able to get anything from my phone into my watch. Notifications, calls, nothing at all. I tried submitting a ticket to support but got no response.
Any help is appreciated, thanks.
Exactly the same problem here. iOS 16 (not beta) and Zepp 7.1.5 (was on Zepp 7.0.3 and it was the same). I have an old Bip in my desk drawer that I tried to activate instead of my Bip S Lite and it actually did receive notifications, until it very soon didn't anymore.
It also seems the watch disconnects itself from Bluetooth from time to time and won't reconnect until I open the Zepp app and do a sync.
I have a watch face that indicates if BT is connected or not, so that's how I know when it's disconnected.
So same problem on both Bip and Bip S Lite. And it seems those aren't the only models affected. There are reports coming from here and there.
Don MC said:
Exactly the same problem here. iOS 16 and Zepp 7.1.5 (was on Zepp 7.0.3 and it was the same). I have an old Bip in my desk drawer that I tried to activate instead of my Bip S Lite and it actually did receive notifications, until it very soon didn't anymore.
It also seems the watch disconnects itself from Bluetooth from time to time and won't reconnect until I open the Zepp app and do a sync.
So same problem on both Bip and Bip S Lite. And it seems those aren't the only models affected. There are reports coming from here and there.
Click to expand...
Click to collapse
Same thing is happening with the Bluetooth too. It gets disconnected and it does not reconnect at all.
Yeah I have seen reports from other watch users and some of them have already been able to fix it but I have tried everything so far with no success.
I have also tried factory resetting the watch(es), forgetting the Bluetooth bindings and uninstalling/reinstalling the Zepp app many times, but to no avail.
EDIT: Have now submiitted 3 reports via the Feedback function in the app. Each one more detailed than the previous.
The latest one:
Watch not receiving notifications and constantly disconnecting from BT.
iOS16, Zepp 7.0.3 and 7.1.5
-Problems started with iOS 16, I think.
-Notifications for Phone calls, WhatsApp, Gmail and SMS. None of them work.
-Watch keeps disconnecting from BT and will not reconnect until I open the Zepp app and do a sync.
-Will not reconnect BT automatically after being out of range.
-I have tried every setting in the App itself and in the phone's settings.
-I tried my old Bip watch and it did show a notification, but only once. Then it too stopped receiving them.
-I have factory resetted both watches many times and uninstalled/reinstalled the Zepp app a couple of times.
-Have made the phone forget the Bluetooth binding many times.
Don MC said:
I have also tried factory resetting the watch(es), forgetting the Bluetooth bindings and uninstalling/reinstalling the Zepp app many times, but to no avail.
EDIT: Have now submiitted 3 reports via the Feedback function in the app. Each one more detailed than the previous.
The latest one:
Watch not receiving notifications and constantly disconnecting from BT.
iOS16, Zepp 7.0.3 and 7.1.5
-Problems started with iOS 16, I think.
-Notifications for Phone calls, WhatsApp, Gmail and SMS. None of them work.
-Watch keeps disconnecting from BT and will not reconnect until I open the Zepp app and do a sync.
-Will not reconnect BT automatically after being out of range.
-I have tried every setting in the App itself and in the phone's settings.
-I tried my old Bip watch and it did show a notification, but only once. Then it too stopped receiving them.
-I have factory resetted both watches many times and uninstalled/reinstalled the Zepp app a couple of times.
-Have made the phone forget the Bluetooth binding many times.
Click to expand...
Click to collapse
I have also done all that and nothing has worked.
Mine started on iOS 16 beta before 16.1 like the update before it and it broke. First time I updated to the beta it was working fine but then the one right before 16.1 that’s where everything started.
Got an update to the Zepp app on my iPhone yesterday (v. 7.1.6) but it doesn't seem to have made any difference. Still no notifications.
I'm beginning to think the problems have something to do with how iOS16 handles Bluetooth connections. The bug is either in iOS16 or in the watch Firmware (although other Amazfit models are affected too).
I base my asumptions on the fact that the watch has trouble reconnecting to BT after being out of range or after it's been restarted. If I restart the phone, however, the watch usually gets connected.
So if it is the phone that initiates the connection, it usually works. But if the watch itself tries to connect, then it doesn't work.
But then again, the notifications do not work even if I keep the Bluetooth window open on my phone and the watch is 100% connected when a message arrives. Strange.
There is also something weird when I make the iPhone forget the BT pairing to the watch. It usually immediately rediscovers the watch and tries to pair again. This happens even if the watch is set to NOT be discoverable.
Just got another Zepp update in the App Store. 7.1.7.
Still no cigar.
There will be no more Huami watches in this household.
Don MC said:
I'm beginning to think the problems have something to do with how iOS16 handles Bluetooth connections. The bug is either in iOS16 or in the watch Firmware (although other Amazfit models are affected too).
I base my asumptions on the fact that the watch has trouble reconnecting to BT after being out of range or after it's been restarted. If I restart the phone, however, the watch usually gets connected.
So if it is the phone that initiates the connection, it usually works. But if the watch itself tries to connect, then it doesn't work.
But then again, the notifications do not work even if I keep the Bluetooth window open on my phone and the watch is 100% connected when a message arrives. Strange.
There is also something weird when I make the iPhone forget the BT pairing to the watch. It usually immediately rediscovers the watch and tries to pair again. This happens even if the watch is set to NOT be discoverable.
Click to expand...
Click to collapse
My apologies for my absence, I am not getting any notifications and honestly lost hope on this. I understand that this is something that might take time but 3 updates later, no real resolution or acknowledgment of what is actually happening.
I also believe that this issue has to do with the connection that the app has with the iOS16 beta since it started after an update. I got beta going, and everything was going smoothly, received an update and everything went south after that with no success or real connection whatsoever.
I just updated the app to 7.1.7 as you did and still the same, the only difference is that it seems the connection is more stable as it has not been disconnected yet and still shows connected without any issues.
I have not encountered the situation you are experiencing in that even if you unpair the watch the phone forces the connection again.
Indeed, I think this will be my last Huami watch. My wife is dying to update to iOS16 but I have warned her multiple times not to since it will break the connection.
Right now I just feel I have a regular watch that I have to charge in order to see the time...
It’s not the iOS beta. I was on the official 16.0 to 16.0.2 and the problem was there. Jumped on the 16.1 beta to try to solve it, but no luck there either.
Threw my Amazfit in my desk drawer and bought myself a Withings Scanwatch.
I finally am able to receive my iMessages on my Amazfit GTR4. On the Notifications in iPhone, go to Messages, and make sure in the Lock Screen Appearance-->Show Previews-> When Unlocked. Mine had changed to Never, as soon as I changed that and synced the Zepp app, now my messages are going through to my watch! Just thought I'd share what worked for me.
Seems that the Zepp app version 7.2.1 has fixed the notifications on my watch. They took their time, I might say.
...aaand then I updated my phone to iOS 16.1.1 and the watch (Bip S Lite) stopped notifying again.
EDIT: My Amazfit Bip on the other hand seems to be notifying just fine. Think I'll be using that one for now.
It definitely seems like the Bluetooth on my Bip S Lite is broken somehow. It won't automatically reconnect after it's been out of range/disconnected. I have to manually open the app to connect it again. And still no notifications.
I've contacted both the seller of the watch and Amazfit. Let's see if they have anything to say about it. I'm using the old Bip for now.
Dusted off my old Bip S Lite and paired it to my phone (or rather reactivated it, since I never did unpair it). To my surprise, it updated its firmware (to 2.1.1.86). Will try it and see if the notification issue is gone.