I see that there is no thread with updates so I'm creating one.
I have the Chinese version AN10 256gb
Received 10.1.0.145 patch 2 this morning
Huawei UK supplied ELS-N39 (c432)
Just received 10.1.0.144
Hi, from Portugal. At 10.1.0.144
July security with some other small updates. 150
Chinese an10 model
Just got 10.1.0.155 on my global version
delivered with 10.1.0.137 (C432E2R3P3) in Germany
Tunn3l said:
delivered with 10.1.0.137 (C432E2R3P3) in Germany
Click to expand...
Click to collapse
Did you upgrade it? What's the latest version?
I did downgrade my to version .132 and now it does not upgrade to latest anymore
tschertel said:
Did you upgrade it? What's the latest version?
I did downgrade my to version .132 and now it does not upgrade to latest anymore
Click to expand...
Click to collapse
anyone faces the boot loop issues after the downgrade ? Any help is well appreciated ?
loser said:
anyone faces the boot loop issues after the downgrade ? Any help is well appreciated ?
Click to expand...
Click to collapse
The only issue after the downgrade, was the fact my phone didn't find any updates.
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Hello,
I have a P40 pro Plus with the buid 10.1.0.156 (C432E2R3P3) (FR).
I used the following method to downgrade to version 10.1.0.132 :
https://www.youtube.com/watch?v=q2b_lBPc-Hk
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
The only downside is that it is not possible to update the version afterwards, but it works while waiting for a possible commercial release from the USA.
Was on. 155 went to erecovery and right there was 11.0.0.126.
Chinese model an10.
Check it an see if anyone else is seeing it.
Does anyone get ELS-LGRP6-OVS 10.1.0.171??
I just found as approved in Firmware Finder.
Received 10.1.0.162 with October Security Updates today.
Huawei p40 pro+
Can anyone help me. When i downgrade my phone huawei p40 pro+ (model: ELS-N39) using hisuite and hisuite proxy. I forget to put cust and preload file in to hisuite proxy and i flash it. Now my phone camera image is upside down and phone restart automatically after 1 min or less unstop. And phone imei no showed null. Cust and preload is unknown. I think my phone is soft brick.. After that i tryed to do system recovery by getting base software and cust and preload from firmware finder (Example of file showed below). i try to flash it. Using hisuite and hisuite proxy phone on blootloader mode. when i click system recovery it give me error. your advice is not supported for system recovery.
Can anyone help me plz.
*can anyone send me hisuiteConfig.xml file edit for huawei p40 pro+(model: ELS-N39).
*Below is installation file i got from firmware finder:
1.418569-ELS-LGRP6-OVS 10.1.0.132
2.418570-ELS-N39-PRELOAD 10.1.0.1(C636R1)
3.418571-ELS-N39-CUST 10.1.0.3(C636)
Hassan_786 said:
Can anyone help me. When i downgrade my phone huawei p40 pro+ (model: ELS-N39) using hisuite and hisuite proxy. I forget to put cust and preload file in to hisuite proxy and i flash it. Now my phone camera image is upside down and phone restart automatically after 1 min or less unstop. And phone imei no showed null. Cust and preload is unknown. I think my phone is soft brick.. After that i tryed to do system recovery by getting base software and cust and preload from firmware finder (Example of file showed below). i try to flash it. Using hisuite and hisuite proxy phone on blootloader mode. when i click system recovery it give me error. your advice is not supported for system recovery.
Can anyone help me plz.
*can anyone send me hisuiteConfig.xml file edit for huawei p40 pro+(model: ELS-N39).
*Below is installation file i got from firmware finder:
1.418569-ELS-LGRP6-OVS 10.1.0.132
2.418570-ELS-N39-PRELOAD 10.1.0.1(C636R1)
3.418571-ELS-N39-CUST 10.1.0.3(C636)
Click to expand...
Click to collapse
Im waiting this solution. I got bootloop too
Receiving 11.0.0.145 (C00E140R3P6) right now.
i received 11.0.0.145 via beta update about 2 days ago, Chinese model. i did not think that it was the stable emui 11. i tthought that the stable would have been based on Android 11 not 10
Received another one 11.0.0.145 (C00E140R3P6ptch02)
Does any one pls tell me where i can get ELS-N39 [C636E3R1P1] dload to download.
Related
I need some help, I have a Mate 10 from China the Al00 version 6gb/128gb version. It came rebranded with AL29 115 (C636) flashed over it. Everything is working fine. When I check Firmware Finder app it shows there are updates available for C636 but these are not approved for installation. However when I check the (C185) update version of the L29 it is approved for my device. So I updated to this version which is L29 8.0.0.119(C185) everything worked fine and when my phone rebooted it was still on L29 8.0.0.115(C636) but the security patch was updated to the latest November one from October. I don't understand what has happened here? WHY HASN'T the build version changed? Why isn't any update version of the C636 not approved for my phone? I would appreciate any help thank you in advance
Interesting I thought about doing this myself, so you probably have the firmware files of .119 but still device details .115. Can you take a screen shot of your syatem/About Phone?
You would need to rebrand your phone I would have thought, currently only funky Huawei can do this from what I've read.
I'm in the same boat, all the C636 firmwares are not authorised currently for my device also. Update.app method doesn't work with out associated hw files and I'm not willing to fastboot the partitions to the device tho should work.
somemadcaaant said:
Interesting I thought about doing this myself, so you probably have the firmware files of .119 but still device details .115. Can you take a screen shot of your syatem/About Phone?
You would need to rebrand your phone I would have thought, currently only funky Huawei can do this from what I've read.
I'm in the same boat, all the C636 firmwares are not authorised currently for my device also. Update.app method doesn't work with out associated hw files and I'm not willing to fastboot the partitions to the device tho should work.
Click to expand...
Click to collapse
I have checked and I am positive that my phone is rebranded to C636, what I find strange is that others in this forum bought the same phone from the same vendor and it was rebranded by the vendor too. They are also in the UK and they have received an OTA to 119 from 115, I do not understand why this is the case.
ramheer said:
I have checked and I am positive that my phone is rebranded to C636, what I find strange is that others in this forum bought the same phone from the same vendor and it was rebranded by the vendor too. They are also in the UK and they have received an OTA to 119 from 115, I do not understand why this is the case.
Click to expand...
Click to collapse
Yeah I've the same device from Wandamobile.
I just received the .119 OTA update as of last night. You'll get it very shortly.
Seems to be in line with firmware finder when you check firmware access, as soon as my access was approved on the app I got the OTA.
somemadcaaant said:
Yeah I've the same device from Wandamobile.
I just received the .119 OTA update as of last night. You'll get it very shortly.
Seems to be in line with firmware finder when you check firmware access, as soon as my access was approved on the app I got the OTA.
Click to expand...
Click to collapse
Thank you very much my friend I appreciate that ?
i have the same problem.. my mate 10 rebrand by itself after i installed a full OTA via firmware finder. my mate 10 was 119(C636) then after i downloaded and installed a firmware 128(636) via firmware finder. it didnt change at all. my mate 10 was still on firmware 119 but the worst it became 119(185) when i try to download a firmware 128(C185) i cannot install it because it was not approved.. but when i try to download a 128(636) all is good but the problem is im still at 119(C185) after the installation..
I have a Chinese Mediapad M5 and I'm looking to flash European firmware on it so I can access Google Play Store etc. I've seen some call this "rebranding".
Thanks to Apo11on's guides I've been able to unlock and root. I was hoping now I could simply flash a European firmware directly from SD card via download mode but it fails.
Any help would be appreciated.
So I think I've figured out what to do, but I'm unable to do it right now as I'm on the latest W09 C00 B124 build and the inbuilt software upgrade doesn't let you flash older builds.
Step 0: Make sure you aren't running the latest build. There has to be a newer version build for C432.
Step 1: Unlock bootloader
Step 2: Download your current C00 stock rom and extract the RAMDISK. This is a backup just in case.
Step 3: Download matching C432 stock rom for the same build. Extract RAMDISK and flash it. [optional: patch with magisk manager for root]
Step 4: Download newer C432 stock rom. Unzip and place UPDATE.APP in a folder called dload on your sdcard root dir (create this folder if doesn't exist). Update via project settings or download mode.
Does this sound correct?
I am trying to do the same for the SHT AL09 C00 LTE China tablet, I think you need to get the C432 oeminfo to rebrand, so far I know some one has only shared a C636 (Asia Pacific) oeminfo in the root thread (https://forum.xda-developers.com/me...-root-guide-huawei-mediapad-m5-t3786157/page3) but it is 4 byte larger than expected.
---------- Post added at 02:36 PM ---------- Previous post was at 02:08 PM ----------
Can anyone with a C432 (Europe) SHT AL09 LTE model to share their oeminfo, it can be obtained in adb shell as root by command: "dd if=/dev/block/platform/hi_mci.0/by-name/oeminfo of=/sdcard/oeminfo.img" AFTER rooting!
Thanks a lot and this will enable us rebrand the Chinese model.
bear_alex said:
I am trying to do the same for the SHT AL09 C00 LTE China tablet, I think you need to get the C432 oeminfo to rebrand, so far I know some one has only shared a C636 (Asia Pacific) oeminfo in the root thread (https://forum.xda-developers.com/me...-root-guide-huawei-mediapad-m5-t3786157/page3) but it is 4 byte larger than expected.
Click to expand...
Click to collapse
Double post, apologies.
Ok that makes sense. Let's see if we can get C432 oeminfos for all 4 models - please upload if you can according to bear_alex's instructions above! Might help to mention the build number of the rom too.
I will update the first post with a full guide and download links when we have this solved.
@bear_alex
hi
my Build : CMR-AL09C432B123 Mediapad M5 10.8"
my "oeminfo.img" http://www.mediafire.com/folder/62r2uhqmcy8ly/HuMePadM5
if this help - feel free to use
Many thanks! unfortunately I am having the 8 inch model, so I am not able to use that but I am sure this will be useful for some one with a 10 inch model!:good:
JamesBott said:
@bear_alex
hi
my Build : CMR-AL09C432B123 Mediapad M5 10.8"
my "oeminfo.img" http://www.mediafire.com/folder/62r2uhqmcy8ly/HuMePadM5
if this help - feel free to use
Click to expand...
Click to collapse
@bear_alex
sorry that you can not use
if any other with 10.8" Pad this help - feel free to use
"simply flash a European firmware directly from SD card via download mode but it fails"
for flash firmware read this https://forum.xda-developers.com/hon...flash-t3778085
this work on all my Huawei/Honor devices (OREO)
This is apparently the link JamesBott tried to post:
https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
Curious if this works - and would this work somehow without adb?
In that link the patched recovery ramdisk is for a Huawei Honor View 10 BKL04 and others say it works on the BKL09. I don't think it's going to work on our Mediapad M5s.
https://forum.xda-developers.com/showpost.php?p=76180037&postcount=18
seems @stag74 has this model "SHT-AL09C432"
I have sent him a message, for people who need to rebrand to the Chinese Version, I am sharing the oeminfo for the C00 SHT-AL09 LTE model.
http://www.mediafire.com/file/inou66bcwcpgahn/oeminfo_SHT_AL09_C00.img/file
hellord01 said:
https://forum.xda-developers.com/showpost.php?p=76180037&postcount=18
seems @stag74 has this model "SHT-AL09C432"
Click to expand...
Click to collapse
bear_alex said:
I have sent him a message, for people who need to rebrand to the Chinese Version, I am sharing the oeminfo for the C00 SHT-AL09 LTE model.
http://www.mediafire.com/file/inou66bcwcpgahn/oeminfo_SHT_AL09_C00.img/file
Click to expand...
Click to collapse
Hello, have you got c432 oeminfo file? or could anyone provide SHT-AL09C432 oemfile? thanks~
C432 oeminfo
hellord01 said:
Hello, have you got c432 oeminfo file? or could anyone provide SHT-AL09C432 oemfile? thanks~
Click to expand...
Click to collapse
I used the HCU client tool to change my version to EU, but still having problem with the rebrand. How do i get you the oeminfo file?
Does anyone have the oeminfo file for a SHT-W09 C636 (8.4 inch version if that matters)? I'd like to rebrand to Asia Pacific. Thank you!
The NoCheck-Recovery is patched stock-recovery and work (by me) on all Huawei/Honor devices with OREO
All have the same OS, but different build ( Hardware, LTE-Bands ... )
There seems to be no exact guide for rebranding our m5.
Exactly how will you use the oeminfo if you have already obtained it to rebrand?
Is flashing the ramdisk image not enough as written in post #2?
Hello. Does anybody have an oeminfo for Huawei Mediapad M5 10.8 Pro CMR-AL19 C432 (European)?
I have CMR-AL19 C00 (Chinese) and want to rebrand it. Tried method from here
https://forum.xda-developers.com/p9-plus/how-to/mod-oeminfo-structure-t3446382.
Could modify my file, but it didn't work properly. It shows me the region hw/eu instead of all/cn, but it changed firmware version number to 8.0.0.046 (86S) instead of 8.0.0.122 (C00). I could install 8.0.0.122 (C432) on it using Firmware Finder on Android. It failed to finish installation, but after I made a low level factory reset from the recovery menu, it booted. I have all of the international apps, Chinese apps are gone, but I can't update the firmware. So, the method is semi-working. Luckily the IMEI is the same. Will restore everything as it was before to start from scratch.
If anybody needs, my oeminfo is here (Huawei Mediapad M5 10.8 Pro CMR-AL19 (C00)) :
https://drive.google.com/file/d/1qCz9HuxUzpJ2VWvAxE6QriBVYMzwcsU0/view?usp=sharing
Hello,
I've got a chinese version SHT-W09 C00 and i want to rebrand it in the international version.
I think i'll give a try with the method of ravenHeart but i miss the oemfile for my version SHT-W09 C432
Is the country bit in the oemfile the only difference between the chinese and the interntional version?
Could i eventually try with the oemfile file for the 4G version SHT-AL09 or is there a risk of brick?
If somenone could post it, i would be very helpful
griolls said:
Hello,
I've got a chinese version SHT-W09 C00 and i want to rebrand it in the international version.
I think i'll give a try with the method of ravenHeart but i miss the oemfile for my version SHT-W09 C432
Is the country bit in the oemfile the only difference between the chinese and the interntional version?
Could i eventually try with the oemfile file for the 4G version SHT-AL09 or is there a risk of brick?
If somenone could post it, i would be very helpful
Click to expand...
Click to collapse
With the method I tried you don't need any other oemfile. I took an oemfile from Huawei Mate 10 and Madiapad M5 8.4" just to see as an example, what are the differences between my version and theirs. This script above decompiled all of the content, but you'll be able to modify only text tiles as there are a lot of binary files there, too. And the only thing I did is I changed "all/cn" to "hw/eu" there and compiled it back. So, you need just your own oemfile for it.
Hi,I am using HONOR 7x BND-L21 IN MIDDLE EAST and it is not receiving update to Android 8.0......thereby all my friends who have bought it in India are receiving this update.......What can I do to get the update ASAP...
THANKS
What firmware region and version are you on actually ?
C....
How to know firmware region??
It's currently running on ANDROID 7.0
EMUI 5.0
go to /System/About Phone
you'll get a line like :
BND-L21CxxxByyy
What's your Cxxx will be rour region's phone.
What's your Byyy will be your build's number.
Bnd-l21c185b14q
ayank668.ak said:
Bnd-l21c185b14q
Click to expand...
Click to collapse
I'm guessing you meant Bnd-l21c185b141 or Bnd-l21c185b144 ?
You could try one of this two methods:
1) try the 'Nougat Update to Oreo' part of this post: https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
with the BND-L21C185CUST185D1B330 available on FirmwareFinder.
or
2) Replace your nougat stock recovery with the 'BND-RECOVERY-NoCheck.img' from the previous link and then you can use FirmwareFinder's android apps to force update to BND-L21C185CUST185D1B330.
Both method will need you to have both bootloader and bootloader's FRP already unlocked.
Thanks for your help........But I was not able to do the methods you gave to install it.....But I got another one....and that one is to Get that software-
In firmware finder there is an option to get it by In-App proxy.so can I update it by that way?????
Coz after seeing videos and videos I understood it.....
ayank668.ak said:
Thanks for your help........But I was not able to do the methods you gave to install it.....But I got another one....and that one is to Get that software-
In firmware finder there is an option to get it by In-App proxy.so can I update it by that way?????
Coz after seeing videos and videos I understood it.....
Click to expand...
Click to collapse
You're describing my second method.
It won't work without replacing stock recovery with 'BND-RECOVERY-NoCheck.img' because the firmware you'll like to install is not 'Approved'.
Sry for disturbing you again and again....what will happen if I install the firmware which is not approved coz I'm not able to understand how to do it...
nothing will happens, firmware will be erased from phone and you will get an 'install failed'
oslo83 said:
nothing will happens, firmware will be erased from phone and you will get an 'install failed'
Click to expand...
Click to collapse
i did upgrade a middle east version of honor 7x to Orio and installation failed and it's brick. i just have access to fastboot. The phone not fully orio and not Noughat! no recovery works!
Better is to wait for the official update..
I asked in hicare when will we receive the update they said between July and September.......
So I'm waiting for the update
Hi, I am using Huawei p20 lite with the build number ANE-LX2C636 and I have been stuck with EMUI 8 for years now and I want to update it to 9 using Firmware Finder, the question is which update should I choose from the list (I know how to check if the update is compatible with my device) since there is a lot and my Android version is very old, should I just install every compatible update starting from the bottom or what?
Thank you guys for your help.
Lepasov said:
Hi, I am using Huawei p20 lite with the build number ANE-LX2C636 and I have been stuck with EMUI 8 for years now and I want to update it to 9 using Firmware Finder, the question is which update should I choose from the list (I know how to check if the update is compatible with my device) since there is a lot and my Android version is very old, should I just install every compatible update starting from the bottom or what?
Thank you guys for your help.
Click to expand...
Click to collapse
Hi, have you tried upgrade via HiSuite (chinese version) , via HiCare or using eRecovery & Wi-Fi?
bozka1 said:
Hi, have you tried upgrade via HiSuite (chinese version) , via HiCare or using eRecovery & Wi-Fi?
Click to expand...
Click to collapse
Over the course of one month I've tried everything you said two times each, I even contacted Huawei local costumer service and they replied and I quote: "Judging by your IMEI number it doesn't appear that you have a Huawei device at the first place, that is why you don't get updates", so yeah, the phone that I've purchased from an official vendor with a relatively higher price than the free market isn't even registered.
Note: yesterday I tried to download a FullOTA ANE-LX2 EMUI 9.0. update via Firmware Finder and the download unfortunately failed.
Lepasov said:
yesterday I tried to download a FullOTA ANE-LX2 EMUI 9.0. update via Firmware Finder and the download unfortunately failed.
Click to expand...
Click to collapse
FF won't help you, you can try get bootloader unlock code for 4euros on hcu-client.com , then rebrand your phone to global version. Or, buy Service ROM on easy-firmware for 17euros and upgrade your phone to EMUI 9.1 using dload method (yes, crazy ). Sorry, I can't help you anymore
P.S.: try a google search to find the method "patched HiSuite" or "proxy HiSuite", it may help you. Good luck!
Can someone help me downgrade the firmware on my P40 Pro Plus. I have the N39 C636 model.
anyone found solution?
I did downgrade my P40 Pro+ using HiSuite Proxy.
You can find the instructions on this thread.
I downgraded to 10.1.0.132 (C432) but now my phone doesn't find any updates. I would really go back to the latest version...
tschertel said:
I did downgrade my P40 Pro+ using HiSuite Proxy.
You can find the instructions on this thread.
I downgraded to 10.1.0.132 (C432) but now my phone doesn't find any updates. I would really go back to the latest version...
Click to expand...
Click to collapse
Hi, what links you have used?
theintelligent said:
Hi, what links you have used?
Click to expand...
Click to collapse
This:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G6113/g1604/v418569/f1/full/filelist.xml
In HiSuite Proxy, I used this link in first top field
http://update.dbankcdn.com/TDS/data/files/p3/s15/G6113/g1604/v418569/f1/
and this in the second top field
ELS-LGRP6-OVS 10.1.0.132
BUT, I'm still not able to find updates with my phone. It keeps saying it has the latest version.
tschertel said:
This:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G6113/g1604/v418569/f1/full/filelist.xml
In HiSuite Proxy, I used this link in first top field
http://update.dbankcdn.com/TDS/data/files/p3/s15/G6113/g1604/v418569/f1/
and this in the second top field
ELS-LGRP6-OVS 10.1.0.132
BUT, I'm still not able to find updates with my phone. It keeps saying it has the latest version.
Click to expand...
Click to collapse
Well I was thinking of down grading in order to install google services, as reported by some that on latest firmware the method don't works. But I found the date trick and was able to install to on the latest firmware.
On your case I suggest to use .147 to update via HiSuite Proxy method.
theintelligent said:
Well I was thinking of down grading in order to install google services, as reported by some that on latest firmware the method don't works. But I found the date trick and was able to install to on the latest firmware.
On your case I suggest to use .147 to update via HiSuite Proxy method.
Click to expand...
Click to collapse
But where can I find .147 links?
The link I sent you was the only P40 Pro+ firmware link I ever found.
And to be honest, I'm afraid I just installed a P40 Pro firmware. But I don't know how to check it.
Hi guys, just to say that TeamMT now has a lot of versions of P40 Pro+ firmware.
You can take a look at:
https://pro-teammt.ru/en/online-firmware-database/?firmware_model=els-lgrp6&firmware_page=0
theintelligent said:
Well I was thinking of down grading in order to install google services, as reported by some that on latest firmware the method don't works. But I found the date trick and was able to install to on the latest firmware.
On your case I suggest to use .147 to update via HiSuite Proxy method.
Click to expand...
Click to collapse
Can you tell me where can I also find this date trick?
jansku said:
Can you tell me where can I also find this date trick?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=utQ9q7pCGEM
theintelligent said:
https://www.youtube.com/watch?v=utQ9q7pCGEM
Click to expand...
Click to collapse
This does not work for me. I got 10.1.0.144 and everything goes fine but when I try to login to my google account with browser mode, it tell me that there is problem with connection to google servers. Looks like google has managed to ban huawei users now or has anyone solution ?
jansku said:
This does not work for me. I got 10.1.0.144 and everything goes fine but when I try to login to my google account with browser mode, it tell me that there is problem with connection to google servers. Looks like google has managed to ban huawei users now or has anyone solution ?
Click to expand...
Click to collapse
Have you done the date hack as mentioned in the video.
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
loser said:
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Click to expand...
Click to collapse
I had the same problem. P40 Pro firmware installed onto P40 Pro Plus. Hopefully I had access to support and got my phone replaced.
However, if you succeeded in updating your firmware with a P40 Pro Plus version, it shouldn't loop boot anymore. What firmware did you use ?
---------- Post added at 10:05 AM ---------- Previous post was at 09:58 AM ----------
tschertel said:
In HiSuite Proxy, I used this link in first top field
update.dbankcdn.com/TDS/data/files/p3/s15/G6113/g1604/v418569/f1/
and this in the second top field
ELS-LGRP6-OVS 10.1.0.132
Click to expand...
Click to collapse
I used this one too for downgrading my P40 Pro Plus (EU - France - C432)
tschertel said:
BUT, I'm still not able to find updates with my phone. It keeps saying it has the latest version.
Click to expand...
Click to collapse
Neither am I ^^
I have understood you can force upgrade with Hisuite proxy, but I'd like to return to "normal" automatic updates.
denosya said:
I had the same problem. P40 Pro firmware installed onto P40 Pro Plus. Hopefully I had access to support and got my phone replaced.
However, if you succeeded in updating your firmware with a P40 Pro Plus version, it shouldn't loop boot anymore. What firmware did you use ?
---------- Post added at 10:05 AM ---------- Previous post was at 09:58 AM ----------
I used this one too for downgrading my P40 Pro Plus (EU - France - C432)
Neither am I ^^
I have understood you can force upgrade with Hisuite proxy, but I'd like to return to "normal" automatic updates.
Click to expand...
Click to collapse
I am unable to even downgrade at the update - currently moved to but no respite from bootloop
loser said:
I am unable to even downgrade at the update - currently moved to but no respite from bootloop
Click to expand...
Click to collapse
This is so frustrating. You have to find a way to reach Huawei support, even if you have to pay for the repair.
Where did you buy your unit ?
Bought from UAE, Using it in India .
Hello,
I have a P40 pro Plus with the buid 10.1.0.156 (C432E2R3P3).
I used the following method to downgrade to version 10.1.0.132 :
https://www.youtube.com/watch?v=q2b_lBPc-Hk
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
for the software used a search in Xda and you will have the solution
The only downside is that it is not possible to update the version afterwards, but it works while waiting for a possible commercial release from the USA.
hi joe.cocs, this video no longer there :
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
rgds.
Huawei p40 pro+
Can anyone help me. When i downgrade my phone huawei p40 pro+ (model: ELS-N39) using hisuite and hisuite proxy. I forget to put cust and preload file in to hisuite proxy and i flash it. Now my phone camera image is upside down and phone restart automatically after 1 min or less unstop. And phone imei no showed null. Cust and preload is unknown. I think my phone is soft brick.. After that i tried to do system recovery by getting base software and cust and preload from firmware finder (Example of file showed below). i try to flash it. Up to point to recovery install. its gives error ''software install failed''..
Can anyone help me plz.
*Below is installation file i got from firmware finder:
1.418569-ELS-LGRP6-OVS 10.1.0.132
2.418570-ELS-N39-PRELOAD 10.1.0.1(C636R1)
3.418571-ELS-N39-CUST 10.1.0.3(C636)