Apologies if this is reported elsewhere (I couldn't find it) but here is a new unlock method by 'mashed-potatoes' on github and it's flippin' awesome!
See: "github.com/mashed-potatoes/PotatoNV[/" (had to format like this due to XDA newbie rules)
I've just unlocked a P10 bootloader with it - the phone was running Oreo with a March 2019 security patch :good:
It is a test point method - so back cover needs to be removed (TP location easily found on YouTube)
When I realised I was stuck on a patch >June18 I thought bootloader unlocking wouldn't be possible (although I was trawling XDA archives to see if flashing board software for unlocked fastboot might provide a route). Anyway, didn't need any of that cuz I ran PotatoNV.exe and put the phone in TP mode and ker-boom: BL unlocked! Amazing work.
EDIT:
A few extra tips to help get through the process:
- You will need to install Test-point drivers - can be found by running the Potato program and following the web address to the User Manual - link to drivers is there. (Uninstall drivers when finished or else phone won't be recognized properly by PC later!)
- Open up Device Manager to check that you are booting to TP - devices changes from 'USB SER' to 'USB (COM')' - or something like that, I don't exactly remember!. It might take a few goes to boot into TP - disconnect then reconnect battery each attempt.
Thanks for sharing this program. this works for me, after bricking my phone 2 years ago. I finally got to unlock my bootloader. And its working now and doing great.
Hello,
Does this soft FACTORY RESET after bootloader unlock?
Regards
RJ
tested on huawei p10 vtr-l09 with emui 9.1 and works perfectly, does not erase data or do hard reset, excellent tool ?
---------- Post added at 07:52 AM ---------- Previous post was at 07:51 AM ----------
rafjak said:
Hello,
Does this soft FACTORY RESET after bootloader unlock?
Regards
RJ
Click to expand...
Click to collapse
no friend, i did it and it doesn't factory reset
Hey bro, could you please tell me the steps you made?
I am in emui 9.1 too.
Thanks.
josua19 said:
tested on huawei p10 vtr-l09 with emui 9.1 and works perfectly, does not erase data or do hard reset, excellent tool
---------- Post added at 07:52 AM ---------- Previous post was at 07:51 AM ----------
no friend, i did it and it doesn't factory reset
Click to expand...
Click to collapse
itsjhndnllclrg said:
Thanks for sharing this program. this works for me, after bricking my phone 2 years ago. I finally got to unlock my bootloader. And its working now and doing great.
Click to expand...
Click to collapse
Hi, can you help with the steps please, i'm a newbie at using git.
Never mind, thanks.
HOW TO OPEN PotatoNV.exe
New_ said:
Apologies if this is reported elsewhere (I couldn't find it) but here is a new unlock method by 'mashed-potatoes' on github and it's flippin' awesome!
See: "github.com/mashed-potatoes/PotatoNV[/" (had to format like this due to XDA newbie rules)
I've just unlocked a P10 bootloader with it - the phone was running Oreo with a March 2019 security patch :good:
It is a test point method - so back cover needs to be removed (TP location easily found on YouTube)
When I realised I was stuck on a patch >June18 I thought bootloader unlocking wouldn't be possible (although I was trawling XDA archives to see if flashing board software for unlocked fastboot might provide a route). Anyway, didn't need any of that cuz I ran PotatoNV.exe and put the phone in TP mode and ker-boom: BL unlocked! Amazing work.
Click to expand...
Click to collapse
Hi, please please explain how to run the potato project
found it, please ignore the post
Friends could pass the tutorial video of the TP location
New_ said:
Apologies if this is reported elsewhere (I couldn't find it) but here is a new unlock method by 'mashed-potatoes' on github and it's flippin' awesome!
See: "github.com/mashed-potatoes/PotatoNV[/" (had to format like this due to XDA newbie rules)
I've just unlocked a P10 bootloader with it - the phone was running Oreo with a March 2019 security patch :good:
It is a test point method - so back cover needs to be removed (TP location easily found on YouTube)
When I realised I was stuck on a patch >June18 I thought bootloader unlocking wouldn't be possible (although I was trawling XDA archives to see if flashing board software for unlocked fastboot might provide a route). Anyway, didn't need any of that cuz I ran PotatoNV.exe and put the phone in TP mode and ker-boom: BL unlocked! Amazing work.
EDIT:
A few extra tips to help get through the process:
- You will need to install Test-point drivers - can be found by running the Potato program and following the web address to the User Manual - link to drivers is there. (Uninstall drivers when finished or else phone won't be recognized properly by PC later!)
- Open up Device Manager to check that you are booting to TP - devices changes from 'USB SER' to 'USB (COM')' - or something like that, I don't exactly remember!. It might take a few goes to boot into TP - disconnect then reconnect battery each attempt.
Click to expand...
Click to collapse
I DOWNLOADED THE FILE FROM GIT.. BUT IT DOESNT HAVE BOOTLOADER FILES INCLUDED WHERE CAN I GET?
KIRIN 960 HUAWEI P10,
1. DOWNLOADED THE ZIP FROM GITHUB
2. RUN THE PROGRAM USING VISUAL INSTALLER
3. PUT THE P10 TO TESTPOINT METHOD AND ENABLE HUAWEI COM 1.0
4. PROGRAM ERRORS WHEN LOOKING FOR BOOTLOADER FILES.
where can i get bootloader files ? for kirin 960 i can
Please do you add support for newer Kirin CPUs? Kirin 990 etc...
DasXardas said:
Please do you add support for newer Kirin CPUs? Kirin 990 etc...
Click to expand...
Click to collapse
Err, no. Finding bootloader exploit on newer Kirin's would be like finding Holy Grail.
You could always join 'Big Huawei Exploits' group on Telegram and ask them how it's going rolleyes
New_ said:
Err, no. Finding bootloader exploit on newer Kirin's would be like finding Holy Grail.
You could always join 'Big Huawei Exploits' group on Telegram and ask them how it's going rolleyes
Click to expand...
Click to collapse
Thank you. I'll try them.
Is it possible to unlock bootloader & root phone, which was rebranded with "funky huawei" ?
Huawei P10, from VTR-L09 to VTR-L29
[QUOTE = "New_, publicación: 83667321, miembro: 10899731"]
Grandes hazañas de Huawei
[/CITAR]
Please link
Many thanks, it worked flawlessly on my P10 running EMUI 9.1! Test points and disassembly instructions can easily be found on the interwebs. Do not forget to write down the bootloader unlock code PatatoNV generates: I needed it after I bootlooped and downloaded the latest rom with erecovery.
M1chiel said:
Many thanks, it worked flawlessly on my P10 running EMUI 9.1! Test points and disassembly instructions can easily be found on the interwebs. Do not forget to write down the bootloader unlock code PatatoNV generates: I needed it after I bootlooped and downloaded the latest rom with erecovery.
Click to expand...
Click to collapse
Did you lost the unlocked BL after you dl the latest rom and recovery?
Sterben11 said:
Did you lost the unlocked BL after you dl the latest rom and recovery?
Click to expand...
Click to collapse
I downloaded the latest rom twice through erecovery. The first time it locked my bootloader, but the second time it did not. The first time I could easily unlock again with the code generated by the patatoNV tool.
M1chiel said:
I downloaded the latest rom twice through erecovery. The first time it locked my bootloader, but the second time it did not. The first time I could easily unlock again with the code generated by the patatoNV tool.
Click to expand...
Click to collapse
Ah yes I bricked my phone 2 times already and experienced what erecovery is for. It's my first time to mess with my good ol p10 have you tried any working open kirin custom on it? cuz everytime I flash a 9.0/9.1 compatible rom it ends on bootloop I used adb and fastboot btw. This is my last question sorry a noobie here.
(take note I followed every instructions on their support page on how to flash)
Sterben11 said:
Ah yes I bricked my phone 2 times already and experienced what erecovery is for. It's my first time to mess with my good ol p10 have you tried any working open kirin custom on it? cuz everytime I flash a 9.0/9.1 compatible rom it ends on bootloop I used adb and fastboot btw. This is my last question sorry a noobie here.
(take note I followed every instructions on their support page on how to flash)
Click to expand...
Click to collapse
The AEX roms worked for me, the omniroms unfortunately did not boot (emui 9.1). They are supposed to work on emui 9.0. Did you do the factory reset from emui recovery? AEX is very basic android and quite nice, although not as fluent as emui.
Related
I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
awells845 said:
I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
What did service center guys say?
I remember you saying you sent it to service center.
miststudent2011 said:
What did service center guys say?
I remember you saying you sent it to service center.
Click to expand...
Click to collapse
They were unable to fix it or replace the device as bricking voids the warranty.
awells845 said:
They were unable to fix it or replace the device as bricking voids the warranty.
Click to expand...
Click to collapse
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
miststudent2011 said:
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
Click to expand...
Click to collapse
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
awells845 said:
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
Click to expand...
Click to collapse
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Tecalote said:
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Click to expand...
Click to collapse
I answered
awells845 said:
I answered
Click to expand...
Click to collapse
Thanks I read it and answered also
awells845 said:
I used HuRUpdater to, flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
I have same problem , I connected my device to adb , and I tried to reboot it , with adb reboot bootloader , fastboot reboot etc. and it said starting dameon , but stil nothing. pease help
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
gerardo96 said:
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
Click to expand...
Click to collapse
Solved!??
How did you solve it?
?
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max, any news?
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
vampirian said:
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
Click to expand...
Click to collapse
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life?
gerardo96 said:
Hello Max, any news?
Click to expand...
Click to collapse
Oh I didn't have any problems with my phone but I wanted to know how to solve it in case I try to upgrade it and have some problems . Sorry for giving the impression that I had a bricked device
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
gerardo96 said:
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life
Click to expand...
Click to collapse
gerardo96 said:
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
Click to expand...
Click to collapse
I tried that but it didn't work. Did you do anything before that ?
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
PalakMi said:
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
Click to expand...
Click to collapse
I did, I could rolled back to 8.0 and then I updated to 8.1 but first you have to unbrick your phone as I did with EMUI9
---------- Post added 6th January 2019 at 12:02 AM ---------- Previous post was 5th January 2019 at 11:58 PM ----------
superuser590 said:
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
I tried that but it didn't work. Did you do anything before that ?
Click to expand...
Click to collapse
Make sure to include the Twrp.iso file
My phone was hard bricked... Everybody said It couldn't be fixed..but I did! If course I suffered 4 days trying to revive it day and night..until I got it
'Morning all,
I would really appreciate some advice on a couple of things about my MATE 10 Standard.
I bought this phone online from an online shop in Manchester around April last year. I got the Mate 10 ALP-AL00 which was rebranded by the shop to ALP-L29. Its currently on 8.0.0.136(C636).
My aim is to unlock and root my device with Magisk and of course get TWRP working as well. From what I have read, there seems to be quite a high level of success but there are still things i'm not sure about. Huawei phones are a bit fragile, software wise and can easily brick. Plus, the fact that the phone itself is the Chinese variant, I don't expect any kind of help from Huawei Customer services if it does get bricked. Hence i'm being very cautious. (Past bad experience with a Honor 9 STF-AL10).
1. my phone is on ALP-L29 8.0.0.136(c636) 1 June security patch. Bootloader Version: Chipset-boston8.0.0.001(02M8)_FASTBOOT
I've refused all attempts to upgrade via OTA as I've read about the 01 and 02 bootloaders fiasco.
2. I've got an unlock code from DC-Unlocker, but I've not tried it yet. I never was able to get a code from Huawei's official site due to the fact that it was rebranded, which lead me to believe the online shop I bought it from used Funky to rebrand. (Apparently, FunkyH messes up something on the bootloader thus preventing unlocking with official unlockcode. AFIK). BUT, the info displayed by phone is exactly the same as what is on the box, imei 1&2, S/N, device Id code, etc...
Basically my questions are:
With the current firmware version I'm on, can I unlock my bootloader, install the unofficial TWRP then root with Magisk? AFIK its on xloader 01.
Is there anything to look out for when doing the above?
and, If I do a full backup immediately after installing TWRP, can this be used to recover the phone if it fails to boot up for any reason.?
I'm not really interested in being on the latest EMUI version etc, just wan't a phone with full root and an easy method to unbrick it.
thank you all,
ums1405 said:
'Morning all,
I would really appreciate some advice on a couple of things about my MATE 10 Standard.
I bought this phone online from an online shop in Manchester around April last year. I got the Mate 10 ALP-AL00 which was rebranded by the shop to ALP-L29. Its currently on 8.0.0.136(C636).
My aim is to unlock and root my device with Magisk and of course get TWRP working as well. From what I have read, there seems to be quite a high level of success but there are still things i'm not sure about. Huawei phones are a bit fragile, software wise and can easily brick. Plus, the fact that the phone itself is the Chinese variant, I don't expect any kind of help from Huawei Customer services if it does get bricked. Hence i'm being very cautious. (Past bad experience with a Honor 9 STF-AL10).
1. my phone is on ALP-L29 8.0.0.136(c636) 1 June security patch. Bootloader Version: Chipset-boston8.0.0.001(02M8)_FASTBOOT
I've refused all attempts to upgrade via OTA as I've read about the 01 and 02 bootloaders fiasco.
2. I've got an unlock code from DC-Unlocker, but I've not tried it yet. I never was able to get a code from Huawei's official site due to the fact that it was rebranded, which lead me to believe the online shop I bought it from used Funky to rebrand. (Apparently, FunkyH messes up something on the bootloader thus preventing unlocking with official unlockcode. AFIK). BUT, the info displayed by phone is exactly the same as what is on the box, imei 1&2, S/N, device Id code, etc...
Basically my questions are:
With the current firmware version I'm on, can I unlock my bootloader, install the unofficial TWRP then root with Magisk? AFIK its on xloader 01.
Is there anything to look out for when doing the above?
and, If I do a full backup immediately after installing TWRP, can this be used to recover the phone if it fails to boot up for any reason.?
I'm not really interested in being on the latest EMUI version etc, just wan't a phone with full root and an easy method to unbrick it.
thank you all,
Click to expand...
Click to collapse
You could just test the code in fastboot: fastboot oem unlock UNLOCKCODE
If the code is incorrect, for some reason, it will say Password incorrect. Else it will bring you to the yes/no unlock screen on phone. DCs unlock code should always work as it doesn't need the correct imei/imei2/sn/product combo when generating unlock code.
There's no real point in staying on xloader 01 anymore, every update (except a few unapproved firmware) after 02 started appearing has been 02.
Downside is that you can't downgrade, but you could replace fastboot in latest fw with the one from may/June and you'd have DC working again. But there's also service firmware available for free on androidhost.ru which can be used if phone should brick. There's also testpoint (only one person has tested this) which can be used to downgrade to any firmware (even xloader 02 to 01).
Before unlocking, backup everything as unlocking will wipe data.
ums1405 said:
'Morning all,
I would really appreciate some advice on a couple of things about my MATE 10 Standard.
I bought this phone online from an online shop in Manchester around April last year. I got the Mate 10 ALP-AL00 which was rebranded by the shop to ALP-L29. Its currently on 8.0.0.136(C636).
My aim is to unlock and root my device with Magisk and of course get TWRP working as well. From what I have read, there seems to be quite a high level of success but there are still things i'm not sure about. Huawei phones are a bit fragile, software wise and can easily brick. Plus, the fact that the phone itself is the Chinese variant, I don't expect any kind of help from Huawei Customer services if it does get bricked. Hence i'm being very cautious. (Past bad experience with a Honor 9 STF-AL10).
1. my phone is on ALP-L29 8.0.0.136(c636) 1 June security patch. Bootloader Version: Chipset-boston8.0.0.001(02M8)_FASTBOOT
I've refused all attempts to upgrade via OTA as I've read about the 01 and 02 bootloaders fiasco.
2. I've got an unlock code from DC-Unlocker, but I've not tried it yet. I never was able to get a code from Huawei's official site due to the fact that it was rebranded, which lead me to believe the online shop I bought it from used Funky to rebrand. (Apparently, FunkyH messes up something on the bootloader thus preventing unlocking with official unlockcode. AFIK). BUT, the info displayed by phone is exactly the same as what is on the box, imei 1&2, S/N, device Id code, etc...
Basically my questions are:
With the current firmware version I'm on, can I unlock my bootloader, install the unofficial TWRP then root with Magisk? AFIK its on xloader 01.
Is there anything to look out for when doing the above?
and, If I do a full backup immediately after installing TWRP, can this be used to recover the phone if it fails to boot up for any reason.?
I'm not really interested in being on the latest EMUI version etc, just wan't a phone with full root and an easy method to unbrick it.
thank you all,
Click to expand...
Click to collapse
U can check unlock code by dialing *#*#2846579#*#* and goto veneer informations>Verify key> Input boot unlock code. If it is correct it will show Success in toast notification.
Hi all,
Appologies for late reply as I've been lumbered with bored kids on their midterms plus a backlog of work.
I've verified the key I go from DC, and success it got verified OK.
Now to prepare and read through again all the important bits for TWRP nstallatuon and magisk.
Quick question, is there a way or method that is 100% foolproof to recover your device via unofficial TWRP.
Noobish questions, I know but please bear with me.
Thanks for your time and patience and best regards....
ums1405 said:
Hi all,
Appologies for late reply as I've been lumbered with bored kids on their midterms plus a backlog of work.
I've verified the key I go from DC, and success it got verified OK.
Now to prepare and read through again all the important bits for TWRP nstallatuon and magisk.
Quick question, is there a way or method that is 100% foolproof to recover your device via unofficial TWRP.
Noobish questions, I know but please bear with me.
Thanks for your time and patience and best regards....
Click to expand...
Click to collapse
There are a few methods to recover your device from an eventual soft-brick, i wouldn't call them foolproof, not because are hard to follow/use, but only because it seem that no matter how easy a guid, a method or a tool is, there are still some people that fail to do it properly.
If your only goal is to install TWRP and Magisk, my advice is to read a bit on these forums and you shoul be fine.
Another advice, that people seem to ignore completely after they acquire root, is to backup your partitions. I recommend Partitions Backup (by Wanam) from Playstore. Backup all partitions beside system, vendor and userdata then transfer the backup on PC, Cloud, etc.
Good luck!
debbuger said:
U can check unlock code by dialing *#*#2846579#*#* and goto veneer informations>Verify key> Input boot unlock code. If it is correct it will show Success in toast notification.
Click to expand...
Click to collapse
Thanks, that's worth the entrance fee alone as they say.
Pretoriano80 said:
There are a few methods to recover your device from an eventual soft-brick, i wouldn't call them foolproof, not because are hard to follow/use, but only because it seem that no matter how easy a guid, a method or a tool is, there are still some people that fail to do it properly.
If your only goal is to install TWRP and Magisk, my advice is to read a bit on these forums and you shoul be fine.
Another advice, that people seem to ignore completely after they acquire root, is to backup your partitions. I recommend Partitions Backup (by Wanam) from Playstore. Backup all partitions beside system, vendor and userdata then transfer the backup on PC, Cloud, etc.
Good luck!
Click to expand...
Click to collapse
Thank you for taking the time to put me right.
I'll go back to your Unofficial TWRP post and go through it A to Z.
Hi all,
thanks for the all the help with my issues.
I've unlocked the bootloader and even got the unofficial TWRP working.
I've also backup my partitions and kept them on my PC and Cloud.
Now the problem I'm having is with Magisk. I can't seem to get it installed.
When I flashed it in TWRP I got an error that /system and /Vendor are not mounted. Mounted them manually and retried the instalation and it worked. When I check the APP, it shows as not installed.
I've tried magisk 16.0 and 17.1 both failed to install. Tried the one in the HWOTA zip and it failed too.
Anyone please advise...
ums1405 said:
Hi all,
thanks for the all the help with my issues.
I've unlocked the bootloader and even got the unofficial TWRP working.
I've also backup my partitions and kept them on my PC and Cloud.
Now the problem I'm having is with Magisk. I can't seem to get it installed.
When I flashed it in TWRP I got an error that /system and /Vendor are not mounted. Mounted them manually and retried the instalation and it worked. When I check the APP, it shows as not installed.
I've tried magisk 16.0 and 17.1 both failed to install. Tried the one in the HWOTA zip and it failed too.
Anyone please advise...
Click to expand...
Click to collapse
Which device and build do you have? First uninstall Magisk with Magisk Uninstaller, by flashing it with TWRP. Then try again to install latest Magisk.
And btw, your partitions backup is not completely done, not untill you install Magisk and use that app, Partitions Backup!
Solved!
I ran the magisk_uninstall twice then ran the magisk.bat again.
Got 16.0 to work, now updated to 17.1 via the app and all is good.
worked like a CHARM.
full root & TWRP + Magisk 17.1 installed
Christmas has come early for me!
Now to way the pros and cons of updating to xloader2 (infact anything above B136)
Much respect to all and best regards.....
:good:
ums1405 said:
Solved!
I ran the magisk_uninstall twice then ran the magisk.bat again.
Got 16.0 to work, now updated to 17.1 via the app and all is good.
worked like a CHARM.
full root & TWRP + Magisk 17.1 installed
Christmas has come early for me!
Now to way the pros and cons of updating to xloader2 (infact anything above B136)
Much respect to all and best regards.....
:good:
Click to expand...
Click to collapse
Well, you can't stay on xloader01 forever, at least not if you want to update your device.
The cons is that once on xloader02, you can't go back to xloader01.
Pretoriano80 said:
Which device and build do you have? First uninstall Magisk with Magisk Uninstaller, by flashing it with TWRP. Then try again to install latest Magisk.
And btw, your partitions backup is not completely done, not untill you install Magisk and use that app, Partitions Backup!
Click to expand...
Click to collapse
All sorted now boss......I'm about to do the backups now.
I'm presented with heaps of partions, anyone in particular or just back the whole lot?
ums1405 said:
All sorted now boss......I'm about to do the backups now.
I'm presented with heaps of partions, anyone in particular or just back the whole lot?
Click to expand...
Click to collapse
All except userdata, system and vendor (these are large and can be found on stock firmwares, so can be skipped).
all done.
just restoring apps and data now.
if I was going to update to x2loader FW how would i do that?
Thanks again pal.
ums1405 said:
all done.
just restoring apps and data now.
if I was going to update to x2loader FW how would i do that?
Thanks again pal.
Click to expand...
Click to collapse
You can use HWOTA8 or HuRUpdater! Beware that if you update to a firmware with patch 01, simply flashing Magisk won't work anymore and you will have to patch the stock ramdisk with Magisk Manage (keep encryption and preserve dm_verity must be enabled) , then flash the patched image with fastboot.
Hello,
I have unlocked bootloader for my P Smart 2019 POT-LX1 EMUI 9.0.1.152 (C432E8R1P12) using paid service.
I thought the life would become easier to root this phone now, unfortunately no..
With the help of XDA member KevMetal I have tried so many things to root this phone or even flash a custom rom. Something is preventing to let my phone boot up with new system.img, also no magisk build is working if I put anything other than original img files phone is bootlooping and going to eRecovery. The only custom thing that was almost working was TWRP for Honor device without touchscreen working (borrowed from forum.xda-developers.com/honor-8x/how-to/guide-how-to-unlock-root-honor-8x-t3864348).
Can anyone help to make Magisk work for this device? Or how to install custom rom? I am stuck now with unlocked bootloader and no root access :S
May I know where did you unlock the bootloader from? Did you tried openkirin?
sawkdanny said:
May I know where did you unlock the bootloader from? Did you tried openkirin?
Click to expand...
Click to collapse
I think you can check dc-unlocker service
xcodejps said:
Hello,
I have unlocked bootloader for my P Smart 2019 POT-LX1 EMUI 9.0.1.152 (C432E8R1P12) using paid service.
I thought the life would become easier to root this phone now, unfortunately no..
With the help of XDA member KevMetal I have tried so many things to root this phone or even flash a custom rom. Something is preventing to let my phone boot up with new system.img, also no magisk build is working if I put anything other than original img files phone is bootlooping and going to eRecovery. The only custom thing that was almost working was TWRP for Honor device without touchscreen working (borrowed from forum.xda-developers.com/honor-8x/how-to/guide-how-to-unlock-root-honor-8x-t3864348).
Can anyone help to make Magisk work for this device? Or how to install custom rom? I am stuck now with unlocked bootloader and no root access :S
Click to expand...
Click to collapse
https://unofficialtwrp.com/root-twrp-psmart-pot-lx1-pot-lx2-pot-lx3/ Firstly sorry for my bad english. :angel:
I think they rooted this device on this site. But I am not sure.
Can you have a look? Thank you. :laugh: :good:
xcodejps said:
Hello,
I have unlocked bootloader for my P Smart 2019 POT-LX1 EMUI 9.0.1.152 (C432E8R1P12) using paid service.
I thought the life would become easier to root this phone now, unfortunately no..
With the help of XDA member KevMetal I have tried so many things to root this phone or even flash a custom rom. Something is preventing to let my phone boot up with new system.img, also no magisk build is working if I put anything other than original img files phone is bootlooping and going to eRecovery. The only custom thing that was almost working was TWRP for Honor device without touchscreen working (borrowed from forum.xda-developers.com/honor-8x/how-to/guide-how-to-unlock-root-honor-8x-t3864348).
Can anyone help to make Magisk work for this device? Or how to install custom rom? I am stuck now with unlocked bootloader and no root access :S
Click to expand...
Click to collapse
What service did you use to unlock your bootloader? I wanna do it too
I know how to unlock bootloader 4 free and very simple...
And you won't share it with us?
harvey said:
And you won't share it with us?
Click to expand...
Click to collapse
You can do it with towelroot by geohot.
My bootloader is free now, after i click it.
towelroot.com
Sorry 4 my Bad english. :good:
[email protected] said:
You can do it with towelroot by geohot.
My bootloader is free now, after i click it.
towelroot.com
Sorry 4 my Bad english. :good:
Click to expand...
Click to collapse
İ touched to "make it ra1n" button and nothing happened except switching app to background in android 10. I hope you can help
Hello guys,
I registrated here in xda, to make ppl know that there is a possibility to bypass payment service for unlocking bootloader for free. It's silly to pay'em for administrate my phone, that I already paid for the device.
I think I got a solution that permits to obtain unlock code. The simple thing to do is download the app called 'Device Connect' from f-droid
Once opened, just tap settings on the slide menu, and there is Device UIN number and Device Password. I think one of those is that damn code.I didn't tried this yet and don't have 100% sure is correct code, but I think it worth a try. Only huawei make pay for unlock bootloader? Its first and last time I have bought an Huawei Device, not because politics, but because of their choice to close bootloader, so their bloatware can collect data, but even without root there is a possibility to clean the mess. F+++ Em
V01D_ said:
Hello guys,
I registrated here in xda, to make ppl know that there is a possibility to bypass payment service for unlocking bootloader for free. It's silly to pay'em for administrate my phone, that I already paid for the device.
I think I got a solution that permits to obtain unlock code. The simple thing to do is download the app called 'Device Connect' from f-droid
Once opened, just tap settings on the slide menu, and there is Device UIN number and Device Password. I think one of those is that damn code.I didn't tried this yet and don't have 100% sure is correct code, but I think it worth a try. Only huawei make pay for unlock bootloader? Its first and last time I have bought an Huawei Device, not because politics, but because of their choice to close bootloader, so their bloatware can collect data, but even without root there is a possibility to clean the mess. F+++ Em
Click to expand...
Click to collapse
First of all, Huawei isn't charging you for bootloader codes, the 3rd party programs that can unlock Huawei's bootloaders are.
Second, other manufacturers prevent bootloader unlocking on some of their phones.
Thirdly, bootloader codes aren't that short. UIN numbers from that app have nothing to do with bootloaders, try reinstalling the app and the code will change.
Example code: 9784200582026427 (P Smart 2018)
Only way that this phone can be unlocked is with PotatoNV and HCU ($19) as far as I know, but in the future there might be cheaper alternatives like DCUnlocker ($4).
And finally, Huawei has probably removed the command for unlocking the bootloader (fastboot flashing unlock) on EMUI 10+ so stay on EMUI 9.1 if you wish to unlock in the future.
Don't get me wrong I don't support Huawei for not allowing us to unlock the bootloader its extremely scummy on their side.
Just chill out and wait for people to find out a method for unlocking, or buy a Xiaomi phone and unlock it the next day.
Can someone give me a download link the 9.0 android rom for this device ? I want root it and i have to downgrade from android 10 .
[email protected] said:
You can do it with towelroot by geohot.
My bootloader is free now, after i click it.
towelroot.com
Sorry 4 my Bad english. :good:
Click to expand...
Click to collapse
Can you give me a link of the programs ?
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Thank you, I am sure this will help many people.
Here is the download link for miflash 2.2.406.5: https://androidfilehost.com/?fid=889764386195901972
Thanks !
Legend! I tried putting the link in however due to the infancy of my user account, I am not allowed to do so
thank you again!
After installing 10.3.3 indian rom to your chinese K20 pro, does it automatically change to L1 security policy and your able to watch netflix in HDR?
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
So with this version no need to use test point?
overcustom said:
So with this version no need to use test point?
Click to expand...
Click to collapse
Apparently that's the claim. I don't imagine there's going to be many volunteers to deliberately brick their phone just to try this out.
We'll have to wait for the next person whose too impatient to fully read the guides and accidentally bricks the phone, before we can get any validation.
Robbo.5000 said:
Apparently that's the claim. I don't imagine there's going to be many volunteers to deliberately brick their phone just to try this out.
We'll have to wait for the next person whose too impatient to fully read the guides and accidentally bricks the phone, before we can get any validation.
Click to expand...
Click to collapse
Hi Zadjalixx, unfortunately, is still L3, xiao mi need to up their game for this ~ I didn't root or load any custom recovery like TWARP into this phone YET. My initial Idea is the review the phone so I can use it for my daily drive. Also I can't see Netflix in PLaystore, ( so is a bummer for sure ). you have any alternative that could suggest? thanks mate.
overcustom said:
So with this version no need to use test point?
Click to expand...
Click to collapse
Yeah , so far that works for me , I have given up at 1st and ready to make use of the hairdryer to remove the back cover to perform the test point reset.
I read through some treads which I am having issues to trace back, by using an older version of miflash unlock we can unlock the phone without the wait for another 30days.
Like Robo says we need to wait for the next victim to do so ~ I should have recorded a video during that process. Cheers ~
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
Same scenario here! But different method...
I did waited days to change month then re apply unlocking bootloader using updated miunlock tool.
'Twas successfull!:laugh:
Running now on 10.3.3 raphaelin for 2 weeks!
Cheers!
About Netflix, you can download the APK on apkmirror: https://www.apkmirror.com/apk/netfl...oid-tv-6-2-5-build-2789-android-apk-download/
DontDamnMe said:
About Netflix, you can download the APK on apkmirror: https://www.apkmirror.com/apk/netfl...oid-tv-6-2-5-build-2789-android-apk-download/
Click to expand...
Click to collapse
I don't think this will work . due to teh security level , It needs to have L1 rather then L3 to use Netflix service.
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Nachiketa.jstu said:
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Click to expand...
Click to collapse
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
dev-DaT said:
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
Click to expand...
Click to collapse
Yeap I MR Dev-T is right did the same ~ it should get your phone runnign in no time. Good luck
Jumundz said:
Yeap I MR Dev-T is right did the same ~ it should get your phone runnign in no time. Good luck
Click to expand...
Click to collapse
How is this correct? While Installing India rom, the bootoader got locked and you’re stuck at the Recovery menu. How Can you Enable Developer Options to bind the ID again when the device doesn’t boot?
Are you saying post the lockout, you booted immediately into fastboot and used the Mi Unlock?
dev-DaT said:
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
Click to expand...
Click to collapse
Nachiketa.jstu said:
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Click to expand...
Click to collapse
Hi Mate, you tired using MiFlash unlock 2.2.4 as well ? Does it work. Basically once i Login to using my MI account and I leave the application run for few minutes and then I am able unlock the bootloader.
Most important step is that you need to put your phone to fastboot then unlock using older version -> then you should be able to boot into your ROM then from there you can enter the developer mode. But initially you should have your phone unlock(boot loader 1st right)
hope it works.
You need to boot your phone into fastboot. in order for the application to work.
Recovery menu ( Original Recovery from Mi / I have yet to load custom recovery like TWRP )
you could restart the phone and boot into fastboot even you are in the original recovery menu. Not sure if that makes sense.
thanks
My problem
Jumundz said:
You need to boot your phone into fastboot. in order for the application to work.
Recovery menu ( Original Recovery from Mi / I have yet to load custom recovery like TWRP )
you could restart the phone and boot into fastboot even you are in the original recovery menu. Not sure if that makes sense.
thanks
Click to expand...
Click to collapse
This is a problem, when trying to pass the Chinese rom with the bootloader unlocked, the phone neither turns on nor fastboot mode and is only recognized via edl, have any idea what I can do?
I can't post external link. If you search on YouTube K20Pro EDL recovery you will get the video , that that is what you looking for.
The application only works if you are in fastboot mode. Thx and good luck
Sent from my Redmi K20 Pro using Tapatalk
kinraraland said:
I can't post external link. If you search on YouTube K20Pro EDL recovery you will get the video , that that is what you looking for.
The application only works if you are in fastboot mode. Thx and good luck
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
thank you very much, do you know which channel talks about this?
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
Hello, thanks for providing good information.
I am planning to flash my MI 9T PRO tonight to the latest India Rom.
Are you receiving the regular official updates after flashing ?
Does this mean that , i cannot use Clean All and Lock option while flashing ? What if i want to lock the phone after flashing because i will not doing this kind of stuff again after flashing.
Thanks
I bricked my phone by flashing a patched boot image from 11.0.2 to a phone with 11.0.0 and I can't get to fastboot mode - etc. I think MSM is my only way back?
I got it to fastboot mode, but there's no boot image for 11.0.0 available, right? Please help
Is it T-Mobile version or unlocked?
There's MSM tool for T-Mobile version and you can download full ROM for unlocked
If yours is unlocked and you can access recovery, use sideload
Code:
adb sideload
Press spacebar once and drag and drop the ROM onto command window and press enter
This can fix boot as well as making version update
bouyakasha said:
I bricked my phone by flashing a patched boot image from 11.0.2 to a phone with 11.0.0 and I can't get to fastboot mode - etc. I think MSM is my only way back?
Click to expand...
Click to collapse
there is no msm tool for the full paid version from OP store .. only for T-Mobile .. but if you phone is still under waranty please get a hold of tech support and tell them you request a remote session and that your phone is seen by your computer . they will have you fill up some forms via email and send you the link to download the tools .. if you do please share them here .. when i had my issue they didnt have the tools available and chose not to send my phone back so i am like you with a briked phone
T-Mobile Variant MSM Tools:
[OPN2005G] [OOS TMO DE18CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: I hope you don't break your phone, but if you do, it's not my fault. Since you are choosing to modify your phone, you accept full responsibility for whatever happens to it, including any damage that may have occurred as a result of...
forum.xda-developers.com
Do not use this on any other variant.
I have no idea how to send it, but I have a boot.img from my factory unlocked N200 (Model DE2117) on firmware Oxygen OS 11.0.0.0.DE17AA. I also have a magisk patched copy of that boot.img. Let me know how to send it and you can give it a shot.
I have found fastboot flashing method for 8T to flash unlocked ROM on T-Mobile version (unlocked bootloader required).
Since T-Mobile version MSM is available, I can use it if anything goes wrong
Stay tuned
amboyscout said:
I have no idea how to send it, but I have a boot.img from my factory unlocked N200 (Model DE2117) on firmware Oxygen OS 11.0.0.0.DE17AA. I also have a magisk patched copy of that boot.img. Let me know how to send it and you can give it a shot.
Click to expand...
Click to collapse
wow .. please upload it to google drive or mega (dot) nz and post the link here .... honestly this gets me very excited ...
mingkee said:
I have found fastboot flashing method for 8T to flash unlocked ROM on T-Mobile version (unlocked bootloader required).
Since T-Mobile version MSM is available, I can use it if anything goes wrong
Stay tuned
Click to expand...
Click to collapse
my bootloader is locked .. thats why MSMDownload tool is a must
edale1 said:
T-Mobile Variant MSM Tools:
[OPN2005G] [OOS TMO DE18CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: I hope you don't break your phone, but if you do, it's not my fault. Since you are choosing to modify your phone, you accept full responsibility for whatever happens to it, including any damage that may have occurred as a result of...
forum.xda-developers.com
Do not use this on any other variant.
Click to expand...
Click to collapse
I tried that on my full paid one from oneplus.com and it dont work ... so yes its a waste to download it for nothing
[GUIDE] Convert TMO to EU via MSM Tool, no SIM Unlock or Bootloader Unlock needed!
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case *** Read the entire post and follow the steps closely before asking for help. Post all error messages and steps you took...
forum.xda-developers.com
There's a maual method.
If you're familiar with fastboot flash with Moto phone, yes, similar commands.
Download full ROM and unpack with payload dumper, and flash every .img one by one
Dimitrimem said:
I tried that on my full paid one from oneplus.com and it dont work ... so yes its a waste to download it for nothing
Click to expand...
Click to collapse
If you use the "+ Quote" button, rather than the reply button, it'll create a multiquote, letting you quote and reply to multiple posts all at once (it'll add a "insert quotes" button to the reply box). This eliminates double-posts, which most forums frown upon.
@Dimitrimem here ya go https://drive.google.com/drive/folders/1DzR0uEdyFeBeID4sVaT96z0Y88sMaomL?usp=sharing
Dimitrimem said:
there is no msm tool for the full paid version from OP store .. only for T-Mobile .. but if you phone is still under waranty please get a hold of tech support and tell them you request a remote session and that your phone is seen by your computer . they will have you fill up some forms via email and send you the link to download the tools .. if you do please share them here .. when i had my issue they didnt have the tools available and chose not to send my phone back so i am like you with a briked phone
Click to expand...
Click to collapse
Tried this today. Now waiting on OnePlus to respond.
bouyakasha said:
Tried this today. Now waiting on OnePlus to respond.
Click to expand...
Click to collapse
Don't wait to long for their reply .. if they don't answer call them on the phone.. it takes less than a minute to have them speak with you ... I dragged it for too long with them waiting 7 days to send me a shipping label than another 5 for another try at it .. another 4 to get the link for download ..after all that they said they don't have it... but this was a while back ... I'd be on that phone fast.. tell them you need your phone as it's the only one ... honestly if you can get the msm tool it would be amazing
mingkee said:
[GUIDE] Convert TMO to EU via MSM Tool, no SIM Unlock or Bootloader Unlock needed!
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case *** Read the entire post and follow the steps closely before asking for help. Post all error messages and steps you took...
forum.xda-developers.com
There's a manual method.
If you're familiar with fastboot flash with Moto phone, yes, similar commands.
Download full ROM and unpack with payload dumper, and flash every .img one by one
Click to expand...
Click to collapse
I am familiar with this from Moto, and some previous manual flashes with my OEM OP5. However, after extracting the partition .imgs from the OOS OTA via this tool when I try to `fastboot flash logo logo.img` (among others), I get hit with `FAILED remote: flashing is not allowed for critical partitions`, even after having unlocked with `fastboot flashing unlock_critical`. How were you able to get everything to work?
I also tried flashing the OTA zip via the TWRP, but it seems like the current dev version of TWRP in that thread is completely borked for N200 as far as ROM flashing goes ://
darkghost568 said:
I am familiar with this from Moto, and some previous manual flashes with my OEM OP5. However, after extracting the partition .imgs from the OOS OTA via this tool when I try to `fastboot flash logo logo.img` (among others), I get hit with `FAILED remote: flashing is not allowed for critical partitions`, even after having unlocked with `fastboot flashing unlock_critical`. How were you able to get everything to work?
I also tried flashing the OTA zip via the TWRP, but it seems like the current dev version of TWRP in that thread is completely borked for N200 as far as ROM flashing goes ://
Click to expand...
Click to collapse
You have to flash in fastbootd (... reboot fastboot) as instructed in 8T forum
mingkee said:
You have to flash in fastbootd (... reboot fastboot) as instructed in 8T forum
Click to expand...
Click to collapse
Ok so now I'm stuck here as well (saw your comment in the other thread):
mingkee said:
I attempted to flash unlocked ROM on bootloader unlocked T-Mobile version phone
It stuck on products.img. The error stated "not enough space for the partition"
What happened?
Click to expand...
Click to collapse
Any luck getting past this?
darkghost568 said:
Ok so now I'm stuck here as well (saw your comment in the other thread):
Any luck getting past this?
Click to expand...
Click to collapse
[GUIDE] Unbrick or restore to OOS using only fastboot
This guide will only work up to OOS 11. This guide is for users that can't or just don't want to download MsmDownloadTool. Linux users especially, since the tool is not available for linux. All you need is a recent version of android tools with...
forum.xda-developers.com
Towards the bottom of that post it talks about getting past that error.