Hi Every one, I just test a method to super CID a HTC U11 life from T-mobile, after you may install a Clean HTC rom (Unlocked or development one) and then you can put an unlock code that you can buy very chep on ebay or similar unlock service (I get one by 1.6 USD).
The procedure is the following:
1. Get developer mode (https://www.youtube.com/watch?v=y3V8h4_ywf4), unlock OEM and USB debugging.
2. Unlock bootloader, in XDA is a lot of guides to do that.
3. Put recovery (I use the recovery in attachment)
4. Go to recovery mode (In download mode go to reboot in bootloader and after in bootloader go to recovery mode)
5. In TWRP recovery connect to PC.
6. Type this command (be sure you have adb software installed) adb shell "dd if=/dev/block/mmcblk0p1 of=/sdcard/mmcblk0p1.img"
7. Go to windows explorer an see an U11 folder (When you are in recovery, TWRP make phoe available on WINdows like U11 drive) a file named "mmcblk0p1.img", copy this file to your PC
8. Search an install HxD hexeditor software.
9. With HxD editor open the mmcblk0p1.img file you saved on PC, and edit it ancd change the CID like HTC__032 by "11111111" eight ones. I follow this gide https://forum.xda-developers.com/u11-life/help/change-cid-mid-s-t3883273
10. Check if your CID is change to 11111111, if is correct, please relock bootloader again.
11. Install a clean HTC rom liqke this "RUU_OCEAN_LIFE_UL_O80_SENSE90GP_MR_NA_Gen_Unlock_2.15.617.12"
12. Boot your phone as normal and configure basics, get IMEI as *#06#
13. Buy o get unlock code i used this link https://www.ebay.com/itm/Network-Un...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 tha only expend 1.6 USD.
14. insert your unlock code and that's it!!
I hope this guide may help!!
where is the recovery?
Related
I am about to root my brothers evo but he has updated and all that stuff. How would i root his phone? Can I follow the root method from Zedomax?
Go to HTC dev and follow the steps to unlock. Once unlocked flash twrp recovery either thru fasboot or goomanager. After that the rooted Rom of your choice
Don't forget about fastboot flashing the boot IMG if needed
Sent from my EVO using xda premium
Let me save you some frustration lol
HTC Dev Unlock
Requirements
HTC Drivers
ADB Tools Mini SDK
Setup
Install HTC Drivers if necessary
Extract ADB Tools anywhere, doesnt matter
Open ADB Tools and hold shift+right click, select open command window here
In phone settings, enable usb debugging and disable fasboot
Connect the phone to pc
Steps
In the command window type adb start-server
Next type adb reboot bootloader
Type fastboot devices to make sure you are connected
Type fastboot oem get_identifier_token
Right click and select mark, click and drag from the top arrows > to the bottom arrows and make sure not to highlight any empty spaces as this will confuse the website, right click and it will be saved to clipboard
Now go to HTC Dev and if you don't already have an account, sign uo for it
Go to unlock bootloader and select other device and accept the agreements
Skip the steps until you get the to token submit window and paste the token you copied earlier and submit.
Go to your email and download the unlock_bin code
Put the code in the ADB Tools folder
Type fastboot flash unlocktoken Unlock_code.bin
When the phone prompt comes up to unlock bootloader hit yes, now you are unlocked, re-enable usb debugging and disable fastboot
Type adb reboot bootloader
Type fastboot devices to make sure phone connected
Type fastboot flash recovery openrecovery-twrp-2.2.2.0-jewel.img
Type erase cache
Reboot phone and you will have unlock and recovery, all thats missing is to restart phone in bootloader and select recovery to flash a rom. Both meanrom and viper have built in kernel installers, should the phone get stuck booting just extract the boot.img from the rom and put it in adb, with phone in fastboot type fastboot flash boot boot.img
What he said
Sent from my EVO using xda premium
I installed an incorrect custom recovery after rooting with King root. After thinking I did the wrong thing I flashed the bad recovery as my boot.img. So now my boot.img and recovery don't work and I'm on a boot loop. Please help
Rougebot said:
I installed an incorrect custom recovery after rooting with King root. After thinking I did the wrong thing I flashed the bad recovery as my boot.img. So now my boot.img and recovery don't work and I'm on a boot loop. Please help
Click to expand...
Click to collapse
Is your bootloader unlocked!? If yes, then fastboot flash the boot.img and the recovery.img of your stock ROM.
Sent from my Che2-L11 using XDA-Developers mobile app
No it isn't I just used king root! I can't do it from here either can I ?!
Then you have to unlock it first by getting the unlock code from Huawei. Here are the steps...
1. Go to https://hwid5.vmall.com/oauth2/port...huawei.com/en/source/plugin/hwlogin/login.php and login with you Huawei ID CONTINUOUSLY FOR 14 DAYS. Don't have a Huawei ID? Then click on "register".
2. After that, you'll be redirected to the unlocking website. Make sure to check the box below.
3. Next, you'll be seeing 5 boxes. Then...
• Enter your model number in the first box
• Enter you serial number in the second box (Can be found in settings or at the back of your battery)
• Enter your IMEI in the third box (Can be found in settings or at the back of your phone)
• Enter you Product ID in the fourth box (Dial *#*#1357946#*#* in the dialer app to get it)
• And lastly, enter the verification code in the fifth box provided beside it (The verificarion code should be a 4-digit code)
4. After entering all of the required information, click the blue box below of all boxes then you'll end up seeing your unlock code (It should be a 16-digit code)
5. Download and install Huawei Update Extractor, Minimal ADB and Fastboot and the drivers. Make sure that USB debugging is enabled in settings -> developer options.
6. Download also the stock ROM and don't install of course, you don't have a recovery.
7. Open Huawei Update Extractor and extract the update. Make sure to only extract recovery.img, boot.img, and system.img.
8. Move the 3 extracted files to the directory folder of ADB. While in the ADB folder, after moving the 3 files, hold Shift and Right click and select "Open command window here".
9. Get a good working USB cable and plug in your device (make sure the device is powered on and the screen is on as well) and type in and enter " adb devices". A pop-up will appear on your phone asking to authorize. Press okay or whatever positive it says. After authorizing, it'll be displaying a code. Maybe like ••••••••••••• devices. If not, then try adb devices again.
10. Once finished with that, type in and enter "adb reboot bootloader" which will reboot your phone to bootloader.
11. Once in bootloader mode, you'll be seeing a text below saying "PHONE Unlocked" or "PHONE Locked" in red. If it says "PHONE Unlocked", it means the bootloader is unlocked, if it says " PHONE Locked", then your bootloader is still unlocked which means you still have to unlock it. To unlock it, type in and enter "fastboot devices" first and you'll be seeing a code again just like from adb devices. If that code shows up then you're good to go.
12. Next type in and enter "fastboot oem unlock ••••••••••••••••". You'll replace those circles with your unlocking code of course. Your phone will now perform a factory reset and will say " PHONE Unlocked" now. Congratulations!!! You've unlocked your bootloader!!!
13. Now we have to flash the files. If you want to flash the recovery only, then type in and enter "fastboot flash recovery recovery.img" and will say OKAY at the end. If you want to flash the whole system, type in and enter these:
• fastboot flash recovery recovery.img
• fastboot flash boot boot.img
• fastboot flash system system.img
• fastboot reboot
Your phone will now reboot into the system. If it's successful, then congratulations!!!!!
Sent from my Che2-L11 using XDA-Developers mobile app
OMG
My phone isn't che2-l11 it's che2-l12.
Then why did your post says Che2-L11? Anyways, the method is just the same as Che2-L11, only select the UPDATE.APP for Che2-L12 not for Che2-L11. Good luck!
Sent from my Che2-L11 using XDA-Developers mobile app
Ok so I was on the zzkey a website trying to get my unlock code! Then I found out that's a $130 sub key . The reason I was on there was because I can't get my product I'd due to the fact that I'm in a boot loop
Rougebot said:
Ok so I was on the zzkey a website trying to get my unlock code! Then I found out that's a $130 sub key . The reason I was on there was because I can't get my product I'd due to the fact that I'm in a boot loop
Click to expand...
Click to collapse
Bro, you can get the unlock code from emui.com no need to use your phone because yes you are in a boot loop but instead, use another device or a computer.
Sent from my Che2-L11 using XDA-Developers mobile app
Che2-L11
Hey guys i have ended up with a huge problem here.
I am having the bootloop even with a flashed CWM recovery flashed it reboots.
I am allowed about a minute inside the recovery before it reboots.
I also suspect my unlock is not properly done.
If i use getvar command it fails.
However it does say my phone is unlocked at the bottom of the screen.
I should probably flash boot to make it stable so how do i do that and does anyone have any suggestion for what i can do now?
The original Emui recovery doesnt recognize the dl folder with update inside for the original rom.
I would love to get help making this stable again.
Thanks.
I believe i had as old as firmware version B086
it was stuck there which is the reason i tried to root and unlock because it was getting very old and unstable.
Elephone M3 quickest way to UNLOCK Bootloader, ROOT and TWRP (no SP FlashTool) Windows/ Linux.
This is only provided as a guide and/ or an alternative, in case some people find the process of flashing with SP FlashTool for the Elephone M3 complicated (either installing the correct drivers, or correctly using the tool without accidentally wiping Vram, or anything else important).
Click to expand...
Click to collapse
Windows:
Things you will need:
1. adb and fastboot
2. usb driver for Elephone M3
3. a copy of a correct version of TWRP for the device, copied in the adb and fastboot folder. Rename your TWRP.img file to recovery.img
4. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Install the above.
2. Boot your phone normally, and enable developer options.
3. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP transfer.
4. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
5. Navigate to the folder you have installed adb and fast boot and copied pre-mentioned file.
6. Open a command prompt navigate to the adb folder (not powershell prompt if you are on windows 10 1703) and type: adb devices
If all is well you should get a number on the left and "device" next to it.
7. type "adb reboot to bootloader". You are now in fastboot.
8. type "fastboot oem unlock". Carefully look the really small letters on the elephone' s screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
9. Once the factory reset is done, once again enable developer otions and usb debugging.
10. Open a command prompt again and once again get into fastboot mode (as previously described).
11. Type "fastboot boot recovery.img". You should now see TWRP.
12. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
13. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
14. Again "fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your extenral SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
Linux:
Things you will need:
1. abd and fastboot (sudo apt-get install android-tools-adb android-tools-fastboot) ---> or similar for your version of the system.
2. a copy of a correct version of TWRP for the device. Rename your TWRP.img file to recovery.img
3. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Boot your phone normally, and enable developer options.
2. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP trasfer.
3. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
4. Navigate to the folder you where you keep the TWRP recovery.img and open a terminal.
5. type "adb devices". If your device is recognized you should see a number and "device" next to it.
6. type "adb reboot to bootloader". You are now in fastboot.
7. type "sudo fastboot oem unlock". Carefully look the really small letters on the elephone's screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
8. Once the factory reset is done, once again enable developer otions and usb debugging.
9. Open a terminal and once again get into fastboot mode (as previously described).
10. Type "sudo fastboot boot recovery.img". You should now see TWRP.
11. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
12. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
13. Again "sudo fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your external SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
I am not able to provide links for files or files at the moment, please look for them yourselves, it should not be hard!
If you found the thread useful, I would appreciate it if you hit the "thanks button". :good::good:
Also, do post back if you need further clarification or assistance or if you have any suggestions for improving the guide.
It seems it is on that russian phone hacking site 4PDA but I can't register there because I can't speak russian. But there may be other sites too with the files.
Can't post a link to it because I'm new here but you can just google "neffos x1 lite 4pda"
Would appreciate any help in that matter. I just want to root my Neffos X1 Lite :crying:
How i want to root neffos x1 lite 7.0
Use it, guys )
fromrussiawithhelp
qwerty4pda
But you need to fill the captcha - picture with digital, written by letters.
For example:
"две тысячи пятьсот десять" > you should enter "2510". Use google )
Hi if you want to get root you need to unlok bootloadr with ADB and install TWRP with SP FlashTool and install root with TWRP.
Sorry, but I can not put a link to the files
Unlok bootloadr
1. Fully charge the battery.
2. Download and unpack the adb utility to the root of the C: \ drive.
3. Download and install adb-driver. Note: look for the adb utility and driver for your OS (win XP / 7/10) in the topic.
4. Open the item “For Developers” in the phone. To do this, go to the application "Settings" - "About the phone" - "Information about the software" and 7-10 times tap on the item "Build number".
5. Go to the opened item “For Developers” and turn on (activate) the items “Debug USB” and “Factory Unlock”. If you turn on the "Factory Unlock" item, you will need to enter a code, then enter the code that you set to unlock the screen. Exit the "Settings" item.
6. Connect the phone to the PC with a USB cable. If there are requests on the phone, then click "OK" / "Allow".
Further I will describe the sequence on the example of Win XP.
7. Open the command line: “Start” - “Run” - enter “cmd” and click “OK”.
8. In the window that appears, enter the command: cd C: \ adb and press Enter
9. Enter the command: adb devices and press Enter
A line like this should appear:
Code
xxxxxxxxxx device
*where xxxxxxxxxx is your phone ID.
10. Enter the command:
Code
adb reboot bootloader
*and press Enter.
The phone should go into fastboot mode - “fastboot mode” should appear on the phone screen.
11. Enter the command:
Code
fastboot devices
*and press Enter.
A line like this should appear:
Code
xxxxxxxxxx fastboot
*where xxxxxxxxxx is your phone ID.
12. This item is optional.
Check that the bootloader is locked. Enter the command:
Code
fastboot getvar all
*and press Enter.
In the list that appears, look for the string (bootloader) unlocked and make sure that:
Code
(bootloader) unlocked: no
13. Enter the command:
Code
fastboot oem unlock
*and press Enter.
The “OKAY” line should appear.
14. Warning! Do not skip this item.
Enter the command:
Code
fastboot reboot
*and press Enter.
The phone will start downloading in normal mode.
15. Wait for the phone to load in normal mode.
All - bootloader unlocked.
You can repeat steps 7-12 and make sure that:
Code
(bootloader) unlocked: yes
*
Then boot into the system by entering the command:
Code
fastboot reboot
*and press Enter.
Note: with unlocked bootloader:
1. On the boot screen saver (when you turn on the phone) will appear the inscriptions:
Orange state
Your device has been unlocked and can’t be trusted
Your device will boot in 5 seconds
2. The item "Factory Unlock" will remain on, but will become inactive.
---------- Post added at 11:33 AM ---------- Previous post was at 10:35 AM ----------
I will give a link to TWRP and root to lay out here, because I can’t lay out here, no rights yet.
Install TWRP and root
Installing TWRP recovery via SP Flash Tool
1. Fully charge the battery.
2. Download and copy the SuperSU archive to the root of the phone's memory card. Archive is not necessary to unpack.
Note: the SR1-SuperSU-v2.82-SR1.zip archive was being flashed to itself, which installs the “systemless” root. You can flash any other SuperSU that is suitable for android 7.0. More information can be found in the SuperSU topic.
3. Download and unpack the latest version of the SP Flash Tool to the root of the C: \ drive.
4. Install the VCOM driver on the PC.
5. Copy the MT6750_neffos_scatter.txt file and the recovery.img image to the unpacked SPFT folder.
6. Open SPFT (flash_tool.exe).
7. In the program window that opens, on the “Download” tab, check that “MTK_AllInOne_DA.bin” is selected in the “Download-Agent” line, and in the “Scatter-loading File” line - scatter-file MT6750_neffos_scatter.txt
Note: if the program complains about the absence of the preloader file, download and copy the preloader_tplink6750_65_n.bin file to the unpacked SPFT folder, but the check mark opposite the preloader should be removed.
8. Make sure that the tick in the program window is only on the recovery section, and the path to the recovery image is indicated in the “Location” column.
9. Click the "Download" button.
10. Connect the switched off phone to the PC with a USB cable. The firmware process will begin.
11. Wait until the end of the firmware until the “Download Ok” window appears.
12. Disconnect the phone from the PC. Not including the phone, go to the SuperSU installation.
I will give a link to the files in a personal message
request for files
jormelo87 said:
I will give a link to the files in a personal message
Click to expand...
Click to collapse
hello i have a neffos x1 lite bricked i am triing to solve the captcha on the 4pda but no sucess,can you pass me the files?
i need the original firmware and original scatter file,ive installed the 360Os and now i dont pass from the recovery,i was not able to install the nfos x1 lite because it tells me that i have a tp-link 6750_65_n pls help
jormelo87 said:
I will give a link to the files in a personal message
Click to expand...
Click to collapse
hi
me too.. iwant files mt6750
can ur pass it to me
Neffos X1 Lite
erinramli said:
hi
me too.. iwant files mt6750
can ur pass it to me
Click to expand...
Click to collapse
i also need te firmware file, it keeps me telling that my device is a tplink6750_65_n
tanks
Hello, i now this tread is old but i need this: Neffos X1 lite 2924 boot.img and recovery.img.
Can someone help me?
Thanks
has any one rooted the moto g power 2022 yet?
egotrip74 said:
has any one rooted the moto g power 2022 yet?
Click to expand...
Click to collapse
I unlocked and rooted my unlocked G Power 2022 that I purchased from BestBuy last week. I was running Pixel Experience but went back to stock and rooted.
Can u send the way u rooted it to the thread
I have the Straight Talk, Tonga, version. And the own unlock is found under developer options. But when I went to unlock the Bootloader the Motorola website said that the Bootloader cannot be unlocked. So I don't understand how anyone could root this device. Again if I bought the unlocked version from best buy and not the straight talk version from Walmart it may be different.
Yes I have rooted my moto g power right now.Here is what I wish I knew before I rooted.One a lot of more customization modules like custom boot intros don't work. Because Motorola is passively agressive forwards root. The moto g power 2022 is not very well known about in fact I'm trying to post the stock rom everywhere so people can update. And then reroot. The rooting process is difficult. I had some problems like the oem unlock was greyed out.
Requirements:
Computer with
One of the following operating systems:
*Windows 10
*Windows 11
*Ubuntu or any distro supporting apt
So here's how to root.
Step 1 backup Data you want to keep
Step 2 go to about phone in settings
Step 3 click build model 5-7 times To enable phone dev mode
Step 4 enable USB debugging and oem unlock
If oem unlock is greyed out don't panic for me I just had to wait 7 days and it automatically fixed itself it's some wierd glitch
Step 5 (Windows only) install adb and fastboot drivers you can find the universal version here
https://adb.clockworkmod.com/ then reboot
Step 6 install adb and fastboot
Windows:
Go to https://developer.android.com/studio/releases/platform-tools and download the Windows adb and fastboot zip.
Now extract the adb and fastboot platform tools into a folder preferably downloads.
Next if you are using Windows 11 open the adb and fastboot location and right click the file explorer backround click the and click open in PowerShell.
For Windows 10 it's harder you have to type the command cd AdbDirectory
Example: cd C://Users/YourUser/Downloads/adbandfastboot_folder
IMPORTANT(Windows10-11)
Note: later we will run commands if you get error like no such file or directory. Make sure you are in the right directory if you are in the right directory type the command like ./adb.exe and ./fastboot.exe (This will only work if you are in the folder
Linux:
type
Code:
sudo apt install adb | apt install fastboot
Step 7 install the magisk app on your phone you can find it here
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
Step 8 get a hold of a boot.img stock rom
Slow way Windows only:
To get this go to https://www.motorola.com/us/rescue-and-smart-assistant/p
Plug in your phone click rescue wait for the download to complete then cancel rescue then go to C://Program Data/RSA/Backups/Roms and unzip the rom and get the boot.img
Fast way: Linux and windows:
Using Linux or just don't have the time
boot.img
drive.google.com
Step 9 transfer the boot.img to your phone.
You can do this by plugging in a USB cable to your phone and go to notifications at the bottom You will see something like use this connection for. Tap it and click file transfer.
If you can't get this to work just email it to yourself
Step 10 open the magisk app and click install
Click select and patch Once the boot image is patched send it back to your computer
Windows: put it in your adb folder
Linux: make sure to put this where the terminal was opened
You are know ready to begin rooting.
All steps beyond 9 I'm not responsible for any form of messups or boot loops or damage.
By continuing you agree you and only you and only you are responsible for damage done to your electronic device I am not responsible for damage in any way.
Step 11( Warning ) This step will void your warranty continue at your own risk.
Windows:
To begin make sure you are in your adb folder
Type ./adb.exe devices
Then type ./adb.exe reboot bootloader
Now to begin
Type ./fastboot.exe get_unlock_data
You will get 4 keys
grab the keys and go to
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
sign in and paste all codes to the oem unlock site You will be emailed a key type
./fastboot.exe flashing unlock yourkeyhere
./fastboot.exe oem unlock yourkeyhere
If this doesn't work try it without the key
Only one of these commands need to work
Linux:
Do the same but replace ./fastboot.exe
And ./adb.exe with just adb and fastboot
Step 12.
Your bootloader is uocked congrats now time to flash your boot.img type
fastboot flash boot magisk_patched.img
Or
./fastboot flash boot ./magisk_patched.img
Your phone will factory reset
Step 13 reboot and you know have rooted your phone. To test if you are rooted Install the magisk app on your phone again. If the modules and super user tab isn't greyed out or you just get a notification to restart your phone to setup root. You have done it.
If something is not working try checking if you flashed the correct image
egotrip74 said:
Can u send the way u rooted it to the thread
Click to expand...
Click to collapse
Here you go just read the post above
egotrip74 said:
has any one rooted the moto g power 2022 yet?
Click to expand...
Click to collapse
not me
eveldun said:
Yes I have rooted my moto g power right now.Here is what I wish I knew before I rooted.One a lot of more customization modules like custom boot intros don't work. Because Motorola is passively agressive forwards root. The moto g power 2022 is not very well known about in fact I'm trying to post the stock rom everywhere so people can update. And then reroot. The rooting process is difficult. I had some problems like the oem unlock was greyed out.
Requirements:
Computer with
One of the following operating systems:
*Windows 10
*Windows 11
*Ubuntu or any distro supporting apt
So here's how to root.
Step 1 backup Data you want to keep
Step 2 go to about phone in settings
Step 3 click build model 5-7 times To enable phone dev mode
Step 4 enable USB debugging and oem unlock
If oem unlock is greyed out don't panic for me I just had to wait 7 days and it automatically fixed itself it's some wierd glitch
Step 5 (Windows only) install adb and fastboot drivers you can find the universal version here
https://adb.clockworkmod.com/ then reboot
Step 6 install adb and fastboot
Windows:
Go to https://developer.android.com/studio/releases/platform-tools and download the Windows adb and fastboot zip.
Now extract the adb and fastboot platform tools into a folder preferably downloads.
Next if you are using Windows 11 open the adb and fastboot location and right click the file explorer backround click the and click open in PowerShell.
For Windows 10 it's harder you have to type the command cd AdbDirectory
Example: cd C://Users/YourUser/Downloads/adbandfastboot_folder
IMPORTANT(Windows10-11)
Note: later we will run commands if you get error like no such file or directory. Make sure you are in the right directory if you are in the right directory type the command like ./adb.exe and ./fastboot.exe (This will only work if you are in the folder
Linux:
type
Code:
sudo apt install adb | apt install fastboot
Step 7 install the magisk app on your phone you can find it here
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
Step 8 get a hold of a boot.img stock rom
Slow way Windows only:
To get this go to https://www.motorola.com/us/rescue-and-smart-assistant/p
Plug in your phone click rescue wait for the download to complete then cancel rescue then go to C://Program Data/RSA/Backups/Roms and unzip the rom and get the boot.img
Fast way: Linux and windows:
Using Linux or just don't have the time
boot.img
drive.google.com
Step 9 transfer the boot.img to your phone.
You can do this by plugging in a USB cable to your phone and go to notifications at the bottom You will see something like use this connection for. Tap it and click file transfer.
If you can't get this to work just email it to yourself
Step 10 open the magisk app and click install
Click select and patch Once the boot image is patched send it back to your computer
Windows: put it in your adb folder
Linux: make sure to put this where the terminal was opened
You are know ready to begin rooting.
All steps beyond 9 I'm not responsible for any form of messups or boot loops or damage.
By continuing you agree you and only you and only you are responsible for damage done to your electronic device I am not responsible for damage in any way.
Step 11( Warning ) This step will void your warranty continue at your own risk.
Windows:
To begin make sure you are in your adb folder
Type ./adb.exe devices
Then type ./adb.exe reboot bootloader
Now to begin
Type ./fastboot.exe get_unlock_data
You will get 4 keys
grab the keys and go to
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
sign in and paste all codes to the oem unlock site You will be emailed a key type
./fastboot.exe flashing unlock yourkeyhere
./fastboot.exe oem unlock yourkeyhere
If this doesn't work try it without the key
Only one of these commands need to work
Linux:
Do the same but replace ./fastboot.exe
And ./adb.exe with just adb and fastboot
Step 12.
Your bootloader is uocked congrats now time to flash your boot.img type
fastboot flash boot magisk_patched.img
Or
./fastboot flash boot ./magisk_patched.img
Your phone will factory reset
Step 13 reboot and you know have rooted your phone. To test if you are rooted Install the magisk app on your phone again. If the modules and super user tab isn't greyed out or you just get a notification to restart your phone to setup root. You have done it.
If something is not working try checking if you flashed the correct image
Click to expand...
Click to collapse
I have Confirmed this method works but I have Motorola G Power (2022) (TONGA) Unlocked from Best Buy no problems at all I'm on Win10. Now I jus NEED Custom Recovery and Custom Rom
Time to make a Device section for this Phone