DISCLAIMER: The information shared here is specific to LEECO Super4 series TVs and NOT PHONES. All firmwares are official LEECO firmwares. User should proceed at his own risk. I am in no way responsible if you brick(or wall if it is large one your Tv.
Hi All,
Since LeEco is no longer offering support for its products in most of the countries (Except China, of course), many of the people who own LeEco products face troubles in getting their problems addressed. This thread is meant for assisting the owners who need the official firmware for Super4 Series TVs.
Useful Information and How To(s):
Reset to Factory Settings:
1. Turn off the TV.
2. Direct the remote to the TV and press buttons in exact sequence: SETTINGS, VOL +, CH +, CH-, VOL-, POWER. Press slowly, hold each button for 1-2 sec.
3. Factory Reset should be done and TV should start.
Flash BIN firmware:
1. Turn off the TV.
2. Put the firmware in the root of the flash drive (fat32). Insert the USB flash drive into the TV (Normally to the top connector, if it does not work then put it in the other)
3. Point the remote to the TV and press buttons in exact sequence: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Press slowly, hold each button for 1-2 sec.
4. The TV would turn on and the firmware flashing would start
5. Make sure the power is not turned off during flashing process as this may brick your TV.
Flash ZIP firmware:
1. Since mostly this is not a full firmware, It is recommended to have a full BIN firmware flashed for the region you are flashing the ZIP firmware for.
2. Turn off the TV
3. Rename the file as Update.Zip and put it in the root of the flash drive (fat32). Insert the USB flash drive into the TV (Normally into the top slot, if it does not work in the other)
4. Point the remote tothe TV and press Buttons in exact Sequence: SETTINGS, VOL +, VOL-, CH +, CH-, POWER. Press slowly, hold each button for 1-2 sec.
5. The TV would turn on and the firmware flashing would start.
6. Alternately (Instead of steps 4-5), you may also use the offline update option from the System Update app already there in TV.
7. Make sure the power is not turned off during flashing process as this may brick your TV.
Official USA Firmware:
USA BIN Firmware 5.8.050S_1028:
https://mega.nz/#F!7PhyDI6D!TnwNlMmWXosK1uCUdpyNGg
USA ZIP Firmware 5.8.056S_0420 (OTA ZIP, must be flashed only after flashing the above bin):
https://drive.google.com/open?id=1N96FWEseGxOToqwks3rNHVB_-VPIadnw
Official INDIA Firmware:
INDIA BIN Firmware 5.8.049S_0906:
https://mega.nz/#F!CaAQFCjI!5l6HqL2H756890q3FKy7Pw
INDIA ZIP Firmware 5.9.057S_0604(OTA ZIP, must be flashed only after flashing the above bin):
https://mega.nz/#F!WXYBRJYQ!LcFLkVNZD0o4Fi2eacX3iQ
Do I need to do anything other then to literally drag the file "LetvUpgrade939.bin" into a freshly formated FAT32 USB Stick and follow Flash BIN firmware instructions? I have a Sept. 2016 Super4 x65 TV with the OS that came from that date. Trying to get it up to the latest stable USA OS version to access HDR. I've tried both ports as well... So odd it won't see the .bin file!
*UPDATE* You must format the USB on a Windows machine (If on a Mac you are out of luck even though it features FAT formatting options) ...and to answer my own question, yes, simply drag the LetvUpgrade939.bin into the usb after formatting.
Has anyone been able to flash the update on the LeEco Super4 X Series 43 L434UCNN? Also the USA ZIP Firmware 5.8.056S_0420 download link does not seem to work.
I also found this scloud_ota_1509613199_1943110553.zip, for the x43 pro in china, and I was wondering if it is the same?
Maverick923 said:
Has anyone been able to flash the update on the LeEco Super4 X Series 43 L434UCNN? Also the USA ZIP Firmware 5.8.056S_0420 download link does not seem to work.
I also found this scloud_ota_1509613199_1943110553.zip, for the x43 pro in china, and I was wondering if it is the same?
Click to expand...
Click to collapse
I have updated the link. Please click on the link and not copy paste the link text.
Regards,
Deepak
Help please, I was flashing firmware, and it stops in the middle, I power it down, now it's not powering up. Can someone please help.
Following your instructions, my x43 is in now stuck in a bootloop: LeEco logo in white appears on a black screen, and shortly after multicolored artifacts appear and the system reboots. Please advise.
Official Firmware for LeEco Super4 x65
Hi
I recently purchased LeEco Super4 x65. Can someone guild or post a link for newest firmware.
Thank you
trying to update leco tv super4 x65
dpando said:
Do I need to do anything other then to literally drag the file "LetvUpgrade939.bin" into a freshly formated FAT32 USB Stick and follow Flash BIN firmware instructions? I have a Sept. 2016 Super4 x65 TV with the OS that came from that date. Trying to get it up to the latest stable USA OS version to access HDR. I've tried both ports as well... So odd it won't see the .bin file!
*UPDATE* You must format the USB on a Windows machine (If on a Mac you are out of luck even though it features FAT formatting options) ...and to answer my own question, yes, simply drag the LetvUpgrade939.bin into the usb after formatting.[/QUOTE
do i use LetvUpgrade938.bin file?
Click to expand...
Click to collapse
dpkrajput said:
Hi All,
Since LeEco is no longer offering support for its products in most of the countries (Except China, of course), many of the people who own LeEco products face troubles in getting their problems addressed. This thread is meant for assisting the owners who need the official firmware for Super4 Series TVs.
Click to expand...
Click to collapse
Although its silly, you may want to add a disclaimer that says this will brick your phone. Believe it or not, I talked to a guy a few days ago that flashed Leeco Super TV firmware to his phone. Needless to say, he is now the proud owner of a brick.
tsongming said:
Although its silly, you may want to add a disclaimer that says this will brick your phone. Believe it or not, I talked to a guy a few days ago that flashed Leeco Super TV firmware to his phone. Needless to say, he is now the proud owner of a brick.
Click to expand...
Click to collapse
Thanks, would do.
rsfinc said:
Following your instructions, my x43 is in now stuck in a bootloop: LeEco logo in white appears on a black screen, and shortly after multicolored artifacts appear and the system reboots. Please advise.
Click to expand...
Click to collapse
Looks like you have updated using ZIP firmware. A factory reset using remote shortcut would help.
salman1434u said:
Help please, I was flashing firmware, and it stops in the middle, I power it down, now it's not powering up. Can someone please help.
Click to expand...
Click to collapse
Hi Salman, were you able to fix this? My tv is not powering up either. The red standby light is off and nothing works.
my super 4 x55 is stuck in a boot loop. I cant do any of the remote codes. help!
Help, please
Hi everyone,
I have a brand new Super4 X55 with 5.8.050S_1028 (stable) loaded on the TV. I tried to update with about 6 different updates and everytime the TV just goes into an endless bootloop. So I reflash with the LetvUpgrade938bin each time and it takes me right back to the beginning.
Can someone please help me? I need to upgrade this to access HDR and I can't seem to have any luck. Why does my TV go into an endless cycle of reboots each time and how do I get an update to actually stay?
Thanks in advance friends. I spent like 8 hours today
Can't get the Reset Menu to work
Hi Guys, I came across this while looking for info for my Super 4X65. It shows currently it's on 5.8.056S_0420 (stable version) US firmware. However, this week it's been frequently crashing, specifically Youtube app and then it progresses to rest of the apps. I've reset the TV twice through Storage and Reset Menu and re-installed/updated Youtube but still same issues.
I can't get the TV Remote Reset to work ( Settings, Volume+, Channel+, Channel-,Volume-,Power) !!! It just turns the TV on and that's it. I downloaded the files on FAT32 formatted drive plugged in, Turned TV off and tried the SETTINGS, VOL +, VOL-, CH +, CH-, POWER as well as offline update option but TV doesn't seem to do anything.... anyone run into this issue at all?
Super 4 X55 Crashing
lljigarll said:
Hi Guys, I came across this while looking for info for my Super 4X65. It shows currently it's on 5.8.056S_0420 (stable version) US firmware. However, this week it's been frequently crashing, specifically Youtube app and then it progresses to rest of the apps. I've reset the TV twice through Storage and Reset Menu and re-installed/updated Youtube but still same issues.
I can't get the TV Remote Reset to work ( Settings, Volume+, Channel+, Channel-,Volume-,Power) !!! It just turns the TV on and that's it. I downloaded the files on FAT32 formatted drive plugged in, Turned TV off and tried the SETTINGS, VOL +, VOL-, CH +, CH-, POWER as well as offline update option but TV doesn't seem to do anything.... anyone run into this issue at all?
Click to expand...
Click to collapse
I am having the same issue. Just started recently. I tried rolling back the YouTube update and that did not help. The TV has become unstable. I have a Super 4 X43 that seems to be working fine. Both are running the same firmware version and same apps, so not sure what is going on. It would be nice to be able to flash this TV to Oreo version of Android TV. Given Leeco's demise I guess there won't be support going forward. I was hoping a Sony update for their Android TV to Oreo might work.
brianf2 said:
I am having the same issue. Just started recently. I tried rolling back the YouTube update and that did not help. The TV has become unstable. I have a Super 4 X43 that seems to be working fine. Both are running the same firmware version and same apps, so not sure what is going on. It would be nice to be able to flash this TV to Oreo version of Android TV. Given Leeco's demise I guess there won't be support going forward. I was hoping a Sony update for their Android TV to Oreo might work.
Click to expand...
Click to collapse
Same thing here. Have X65 YouTube crashing. Apps are barely loading and if they load at all no video is coming through sometimes just audio. TV looks fine when displaying menus or apps page.
RoadZombie said:
Same thing here. Have X65 YouTube crashing. Apps are barely loading and if they load at all no video is coming through sometimes just audio. TV looks fine when displaying menus or apps page.
Click to expand...
Click to collapse
Experiencing the same on my x55
Hi,
last year I bought a NPET Android TV BOX with 2GB RAM and 8GB ROM. It was equipped with an Android 6.0 ROM from factory which I am searching now.
In December 18, I had the idea to install the ATV Xperience SW, because the factory one worked...lets say OK. But not flawless and with limitations.
I prepared a TWRP 3.0.2 mircoSD card and backuped BOOT, DATA and SYSTEM, just in case something goes wrong and...the ATV installation went wrong!
Red Light was the result and the box didn't boot up by pressing the power button. I plugged the USB Cable in and flashed a A95X firmware, which seemed to be similar in terms of HW with my boxes. And everything worked, except Wifi and BT. Doesn't matter, I thought, I have TWRP and my backup, but it doesn't worked out. BOOT and DATA partitions could be recovered but not the SYSTEM partition (createTarFork() process ended with ERROR=255). I tired several other images, but neither Wifi nor Bluetooth could be actitivated. For testing purcposes, I have installed OpenELEC on a microSD card and both, Wifi and BL, started to work again. But as this box is for my girlfried, she wants to have Android back on this device. Wifi and BT Chip is the KM63351412 (Please see attached PICS of the mainboard).
Does somebody of you has the factory image of this box?
I have searched the Internet the last couple of days, but couldn't find it. I have also contacted NPET directly, but no response so far.
Or does somebody know an android image with the KM63351412 chipset embedded?
Hi All,
fortunately, a guy called "aidanmacgregor" has made an universal image which contains various wifi and bt driver in this image.
https://forum.xda-developers.com/an...m-android-tv-custom-rom-7-1-2-s905x-t4098131/
for me, this box called npet s905x is now fully working again!
Thanks to the creator @aidenmacgregor!
Cheers,
Cromatic
??