TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again
Related
hey guys, so i finally could root my A500H on marshmallow. just follow the steps :
-first thing you need is TWRP that @TheWhisp TWRP worked perfectly for me! here's the link -> https://www.androidfilehost.com/?fid=24499762636007546
-then you also need Odin (v. 3.12 worked perfectly for me) -> http://odindownload.com/download/Odin3_v3.12.3.zip (direct download link)
-after that, go to download/Odin mode on your phone by turning it off, plugging it to your PC and holding the power button, home button, and Vol-down until phone vibrates and you will see the warning page. just press vol-up and there you are in download mode
-now it's time to open Odin, click on AP and choose the TWRP file you downloaded and wait for it to flash the file and reboot
-now you need the root file (here -> https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip ) on you phone and flash it with twrp and reboot and YOU'RE ROOTED AND TWRP INSTALLED! CONGRATULTIONS
enjoy your freedom
you can also follow me on twitter -> @devsignerz
everything is ok on my phone a500h but i have a problem , when i get into the twrp recovery and i want to reboot to system didnt reboot to system it just reboot to recovery again , how to fix this problem???? i need to fix this problem on my a500h ?????
thank bro,ur awsome
its work for me:good:
but i'm hardly looking for a good custom rom for A500H,unfortunatly i'm failed in the installing to all of them
can u help me,and guide me to install a custom rom
i'm prefer cm 13 and simular
wating for you
thanks
farganx said:
everything is ok on my phone a500h but i have a problem , when i get into the twrp recovery and i want to reboot to system didnt reboot to system it just reboot to recovery again , how to fix this problem???? i need to fix this problem on my a500h ?????
Click to expand...
Click to collapse
I got the same problem mate, please have any way except flashing, tks
Hey folks. I've installed lineage OS 15.0 following with GApps ARM 8.0 and ran into an issue of infinitelly flashing file 1 of 1.
These are the last logs I get:
...
- Installing speech
- Miscellaneous tasks
- Copying Log To /external_sd
- Installation complete!
Click to expand...
Click to collapse
Check how it looks here: imgur.com/a/3UVVWKf
And that's it... Nothing happens after that. It just says "Flashing file 1 of 1" with an ongoing loading screen. Running for about 2 hours now.
Is there any way to cancel the flashing task or reboot the twrp? Any help would highly appreciated.
PotatoOrgyLt said:
Hey folks. I've installed lineage OS 15.0 following with GApps ARM 8.0 and ran
...
twrp? Any help would highly appreciated.
Click to expand...
Click to collapse
Your TWRP version's is super old , you should update it .
But exit this situation is a problem , it seem that the only solution is a forced reboot to bootloader (by pressing vol down + power button until the phone restarts in bootloader mode) .
I'm not sure at all of this solution , so I can't be responsible for what will happen to your phone.
Then reflash LOS ( if it worked the first time , it may work 2nd time ) with the SU Add-on to root your device .
Then , boot your device , download the TWRP companion app , and download the right and up to date recovery image for your device.
Since your rooted your device , you'll be able to flash the recovery image via the TWRP app .
Flash the recovery and with the app and reboot to recovery.
Finally flash your GApps .
Keep at mind that TWPR (your custom recovery) is the most important thing of your phone , that's what allows you to recover your phone even in critical situation .
So please , until now , keep it up to date
Good luck
RaiZProduction said:
Your TWRP version's is super old , you should update it .
But exit this situation is a problem , it seem that the only solution is a forced reboot to bootloader (by pressing vol down + power button until the phone restarts in bootloader mode) .
I'm not sure at all of this solution , so I can't be responsible for what will happen to your phone.
Then reflash LOS ( if it worked the first time , it may work 2nd time ) with the SU Add-on to root your device .
Then , boot your device , download the TWRP companion app , and download the right and up to date recovery image for your device.
Since your rooted your device , you'll be able to flash the recovery image via the TWRP app .
Flash the recovery and with the app and reboot to recovery.
Finally flash your GApps .
Keep at mind that TWPR (your custom recovery) is the most important thing of your phone , that's what allows you to recover your phone even in critical situation .
So please , until now , keep it up to date
Good luck
Click to expand...
Click to collapse
Hey RaiZ,
Thanks so much for looking into this!
Pressing vol down + power button solved the issue and the OS started perfectly fine. I've updated TWRP as well just like you mentioned, however, I'm having trouble getting the device rooted. I've downloaded the latest SU Add-on from this page: download.lineageos.org/extras and installed LOS with the addon. It did not work.
Then I've decided to switch to Ressurection OS 8.1 which comes with Magisk root inbuilt, yet that did not work either. Access to root was only showing root access for ADB which did not work ("adb shell su" command outputed "su: not found")
Lastly, I've installed latest version of SU-addon for RR OS. Now I'm getting root access options for apps and ADB, but selecting "Manage root access" outputs no applications for root access, "root checker" app still cannot verify root and adb shell su command returns "Permission denied".
Do you have any suggestions what might be wrong?
PotatoOrgyLt said:
Hey RaiZ,
Thanks so much for looking into this!
Pressing vol down + power button solved the issue
...
Do you have any suggestions what might be wrong?
Click to expand...
Click to collapse
Personally , I don't really know a lot about Resurrection Remix , but assuming that it work the same as LOS , you should go to the developer option and see what you got.
If you still got op only 2 option after flashing the add-on , I will advice you to flash Magisk on your device to root it
RaiZProduction said:
Personally , I don't really know a lot about Resurrection Remix , but assuming that it work the same as LOS , you should go to the developer option and see what you got.
If you still got op only 2 option after flashing the add-on , I will advice you to flash Magisk on your device to root it
Click to expand...
Click to collapse
Appreciate your guidance trough this! Flashing Magisk did the trick.
PotatoOrgyLt said:
Appreciate your guidance trough this! Flashing Magisk did the trick.
Click to expand...
Click to collapse
You're welcome ?
wrong thread
TWRP is an open source, community project. A custom recovery is used for installing custom software on your device. This TWRP has included Magisk. After a long wait, Finally, A50s can be rooted without bootloop issue using Kernel Mod. Kernel Mod based on Quantum Kernel v.1.1, edited by halcyon441 to make it works on A50s for fixing bootloop.
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty. We are here just try to help you, don't be stupid and don't blame us if you make mistake
Downloads
TWRP_3.4.0.0_A50s_Magisk.tar
QuantumKernelv1.50_A50sxx.zip
Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Copy these 2 files to micro SD Card ( Quantumkernel and disable dm_verity )
Install TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mod
3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
4. Flashing TWRP_3.4.0.0_A50s_Magisk.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
6. Install QuantumKernelv1.50_A50sxx.zip
8. Select Wipe -> Format data.
9. Install Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip
10. Select Reboot to Recovery
11. Install Magisk Manager
12. Done!
For detail instructions WATCH THIS VIDEO
Contributors
halcyon441 and redymedan
Source Code TWRP : https://github.com/halcyon441-png/twrp_samsung_a50sxx
Source Code Kernel: https://github.com/halcyon441-png/android_samsung_exynos9610/releases/tag/v1.5
Created 2020-06-08
Updated 2020-07-23
First ?
great thanks mate, @redymedan & @halcyon441
After rooting, phone restart unroot again,, how to fix?
rockadz9 said:
After rooting, phone restart unroot again,, how to fix?
Click to expand...
Click to collapse
enter TWRP recovery then select Reboot to Recovery, each time you restart the phone normally, it will unroot it.
You can join to telegram group https://t.me/androidhowto2020
̶h̶e̶y̶ ̶@redymedan,̶ ̶d̶i̶d̶ ̶y̶o̶u̶ ̶c̶h̶e̶c̶k̶ ̶t̶h̶e̶ ̶c̶a̶m̶e̶r̶a̶?̶
̶i̶s̶ ̶i̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶o̶r̶ ̶n̶o̶t̶?̶ ̶b̶e̶c̶a̶u̶s̶e̶ ̶m̶y̶ ̶c̶a̶m̶e̶r̶a̶ ̶i̶s̶n̶'̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶a̶f̶t̶e̶r̶ ̶i̶ ̶f̶l̶a̶s̶h̶ ̶t̶h̶a̶t̶ ̶k̶e̶r̶n̶e̶l̶
[Edit]
My bad, turns out i was flashing the zip from A50, not the edited custom kernel from @redymedan gdrive
change to source code link to this please.
halcyon441 said:
change to source code link to this please.
Click to expand...
Click to collapse
Done!
Any chance for permanent root which persist after reboot?
Mikolaj.Q said:
Any chance for permanent root which persist after reboot?
Click to expand...
Click to collapse
You can try Smali Patcher and thick/select only "recovery reboot".
Did this working with SM-A5070
ba_alwy said:
Did this working with SM-A5070
Click to expand...
Click to collapse
not tested
Can I flash the the tar file without the magisk suffix and flash the latest magisk zip file?
If not, how can I make root persist after reboot with smalli patcher?
I tested and not working with A5070
The only thing it's root with magisk and the phone keep reset
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
muhsin_Sultan said:
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
Click to expand...
Click to collapse
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
redymedan said:
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
I already unlocked the bootloader. If you do it from a locked bootloader it would say not allowed due to oem lock. But I already unlocked it. I saw another thread where say to flash the AP file with Magisk then flash everything in odin except replace AP with the magisk patched one. Will that work @redymedan
Update TWRP 3.4.0.0 and Quantum Kernel v1.50
Thanks to halcyon441 for the Good Jobs :good:
sm-5070
hello,
I tested with a A50s SM-5070. TWRP is well flashed, but the phone doesn't want to reboot in recovery.
Then i flashed the stock ROM
On which version of A50s is it tested ?
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：new
TWRP-3.4.2BREDMI9.rar - 蓝奏云
文件大小：31.8 M|
wwa.lanzous.com
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Shas45558 said:
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
Click to expand...
Click to collapse
My device has been tested without problems
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
lkj00 said:
My device has been tested without problems
Click to expand...
Click to collapse
Great.....you should try gsi on your device....
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Well it works for me. I use the redmi 9 nfc 3/32 lancelot.
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Funk Wizard said:
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Click to expand...
Click to collapse
Thanks for quick respond.
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Colossus96 said:
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Click to expand...
Click to collapse
I guess you can test it yourself. Quite easy to fix things if it doesn't boot the TWRP. You'll simply flash the original recovery.img from the current MIUI full ROM installed on your phone to erase the TWRP without even erasing userdata. My bootloader is currently locked so can't test it now. About bricks, as you know this is an MTK so you have to be extremely careful.
The advantage with TWRP is you can mod the system so long as you enable write access to that partition. Flashing Magisk modules also works better via the recovery.
Last thing, I think the only way you can get root on MIUI is through the patched boot method. Flashing the Magisk installer zip in TWRP just doesn't do.
Abdullah.Csit said:
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Click to expand...
Click to collapse
I also wait for offical..i root my device and use mod...
I do not want to take risk because of mtk prossessor...
I did
nielsync said:
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Click to expand...
Click to collapse
I did installed it into my Redmi 9 4/64 Indonesia version... So far no problem at all
---------- Post added at 12:57 AM ---------- Previous post was at 12:50 AM ----------
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Hi sir, i have tested this twrp, and its stable enough.. but i wanna ask u for helping us make a stable/official one based on PBRP (Pitch Black Recovery Project). Can u help us with this??
My telegram : @afdy_y
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
What is redmi 9 one key flashing tool? How can i find it?
Shas45558 said:
What is redmi 9 one key flashing tool? How can i find it?
Click to expand...
Click to collapse
It means the flashing program in the zip. You can just flash the img file via fastboot command. I tried, it works.
Copy the .img file to your fastboot folder & flash .
Almost brick my device.....
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Shas45558 said:
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Click to expand...
Click to collapse
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
That's mean this recovery is not helpful.....
Because we root our devices without any recovery....
Colossus96 said:
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
Click to expand...
Click to collapse
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Abdullah.Csit said:
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Click to expand...
Click to collapse
In order to get that lucky we will need source code. Without source code nothing can be done properly.
TWRP 3.5.0 One UI 3.1 for Samsung Galaxy A50 Android 11. How to Root Samsung Galaxy A50 Android 11 with TWRP 3.5.0 + Magisk. The TWRP Recovery support Galaxy A50 One UI 3.1 Android 11 firmware. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP 3.5.0 comes with Magisk Patched. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
LET ME KNOW IF IT WORKS FOR:
SM-A505FN, SM-A505G, SM-A505GN
Manual Instructions for Flashing and Rooting
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP as AP in ODIN, then click start.
DO NOT SKIP THIS STEP! Don't remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
Format data
Install multidisabler-samsung-2.6.zip
Reboot to Recovery
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Connect Phone to Internet
Install Magisk-v22.0.apk and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
Video Instructions - Details
Download
TWRP 3.5.0 A11
Magisk22 app
Thanks to:
@neel0210 for Kernel Source
@Enzoaquino for OrangeFox
Good work
Thanks for twrp
Thank you
Flashing this @ A505GN. Hope it works
The twrp works but the multi disabler didn't work
This is a505gn
I reverted back to 3.4 because I encountered an issue. I'm stuck in bootloop, cannot access twrp nor download mode. Had to remove the back of my phone and unplug the ribbon connecting the battery to the phone just to power it off.
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
q1pa said:
I already flashed the twrp via Odin but when I installed Magick on the phone this came up. Did I done something wrong?
Click to expand...
Click to collapse
it happens to me sometimes
just rebbot to revocery in twrp
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Sharath Mane said:
Thank you @redymedan for the recovery. I'm glad to say that
your "how to android" channel is great.
I have a question Please clarify the following.
In this recovery Can we update magisk to latest? (When it released)
Click to expand...
Click to collapse
Yes, you can update it from magisk apps
It worked!
I had to run a patched AP first for magisk to work
Im on a A505G/DS
It worked just fine on my A505FN! Thanks!
Worked perfectly on A505W !
Had to use Multidisabler 3.1 instead.
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
IngolfN said:
I have an A505FN and I'm not able to root it with Magisk. If I try to install the linked TWRP_v3.5.0_A505_A11_Magisk.tar with Odin, then I can't reboot into Recovery afterwards - instead the Download-Mode appears again.
With RR-TWRP_v3.4.0_A505_CUBC_OneUI.tar from another Thread, it's possible to start into TWRP after flashing it with Odin. But if I boot into System (LOS 18.1) and start the already preinstalled Magisk, Magisk updates itself and after restart of Magisk I can try to install Magisk and in the first screen "Recovery Mode" is checked. If I click on "Next step", the Option "Recovery Mode" disappears and I can choose a file to patch.
I don't know where I'm wrong.
Click to expand...
Click to collapse
Flash stock rom with odin
Reboot. Do not login to google. Check oem grayed out.
Reboot to download mode
Select 3.5.0 twrp as ap. (You should Untick autorestart in options) . Start.
By connecting cable reboot into recovery by using button combo. Do not reboot to system. Do not remove cable.
After entering twrp.
Format data. Next flash multidisabler.
Now select reboot to recovery.
Wait for few minutes, if doesn't boot,force restart by using volume down and power buttons. It will bootup.
You can finish ur setup now.
You can flash other roms . To enter twrp you need to connect cable with pc and use buttons.
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
you will edit your ini.environ.rc
watch it in youtube
IngolfN said:
Thank you Sharath Mane,
I followed your steps again and I was able to install Magisk successfully in the Stock-Android
In the next step, I booted in TWRP again and
- Format Data
- Fomat Dalvik, Cache, System
- flashed Unofficial LOS 18.1 as System Image
after booting into System I started Magisk and after Download and Install there is - *no Magisk installed* - only the App
Is there an additional step neccessary and I have missed it? Or is it not possible with LOS?
Click to expand...
Click to collapse
Goto twrp and select reboot recovery