[OFFICIAL] BlissROMs Q Mod //BLESS - Treble-Enabled Device Development A/AB ROMS

BlissROMs 12.12
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
BLESS is a project which based on BlissROMs with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot LineageOS GSI, but can't boot BLESS - try to removing that file
UPDATE VERSION
base: BlissROMs 12.12
latest build: 2020.10.15
treble patches: v222+
SPL: 5 Oct 2020
FEATURES/CHANGES
• no root, no SuperUser app, have "secure" file for SafetyNet
• Phh Settings moved to the bottom
• tuning of the status bar, icons more tightly to each other
• added option to set statusbar icons spacing (need reboot to properly apply changes)
• few changes to reduce consumed resources - more space, more speed, more battery life
• fixed the display of the status of security patches (GSI specific)
• now some pre-installed Apps can be disables from Settings
• fixed offline charger to works in enforced mode (still not for all devices)
• fixed call recording in Dialer (not supports on all devices)
• deep sleep fix included (based on patch by @Hami_Do)
• on battery saver auto dark mode disabled, you can choice light/dark theme
• slightly fixed system UI theme (QS bottom icons padding, search bar in Settings etc)
• in stock camera removed HAL3 green artefacts which exist on few Xiaomi devices
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• option to set system UI optimization level (use careful, do not set IPS level for OLED)
• fixed DeskClock widget (with the GoogleSans font was cropped)
• turned off the indicator flashing when the battery level is low
• added option "Swipe for notifications" for fingerprint scanner
• in Dialer added option to set fullscreen contact's photo
• reworked dark mode support for few apps (Files, Calculator, DeskClock)
• replaced apps: Gallery, Dialer, Messaging, Calculator
• added dex-optimisation rule (for the services)
• French and Russian translations for custom settings
• for Mi A2 Lite LTE is set by default
• updated Redmi 6 Pro overlay
• fixed boot on Mi 10 (Lite), K30 (Pro)
• removed Updater (useless in GSI)
• fixed AOD settings
• have ARM A-only Go (1.9+Gb)
• fixed Google cast (audio mirroring) and AirAudio
• added back old AoD settings from 12.10 version
• all builds now have system root 'su' and Superuser, also no "secure" file
• due to those changes no SafetyNet pass by default, you should set it manually
• added custom Google Cloud restore option (Settings > Accounts)
• by default enabled automatic brightness and LiveDisplay
• added DT2W support for QIN 2
• initial Redmi 9 'galahad' overlay
• added few patches from GrapheneOS
*grayed options not realized yet
DOWNLOAD (CLICK H3RE)
vanilla, gapps: all architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS

---

re1

---

rere2

---

Brilliant

---

Awesome rom. Thank you for your efforts!

---

bomzhellino said:
Awesome rom. Thank you for your efforts!
I have noticed only one issue: Settings crash when clicking on "Update Bliss" =)
Click to expand...
Click to collapse
How is update bliss supposed to work in a gsi lmao.... He has to compile new versions every release

---

antintin said:
How is update bliss supposed to work in a gsi lmao.... He has to compile new versions every release
Click to expand...
Click to collapse
Sorry, I was wrong. Everything is working.

---

eremitein said:
BlissROMs 12.10
Click to expand...
Click to collapse
Congratulations on reaching the international level.

---

thanks man
finally

---

Hi, is notification pulldown supposed to look like that? I find it very missaligned and lacking padding ;/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

---

thecoolkid said:
Hi, is notification pulldown supposed to look like that? I find it very missaligned and lacking padding ;/
Click to expand...
Click to collapse
On a tablet, yes
On a phone? No

---

Some random said:
On a tablet, yes
On a phone? No
Click to expand...
Click to collapse
That sucks, that it's not optimized for tablets, they just changed too much stuff.

---

thecoolkid said:
That sucks, that it's not optimized for tablets, they just changed too much stuff.
Click to expand...
Click to collapse
This is a stock android feature :/
It has been like this since at least android nougat :/

---

Some random said:
This is a stock android feature :/
It has been like this since at least android nougat :/
Click to expand...
Click to collapse
No it's not, every other Q ROM looks fine

---

thecoolkid said:
No it's not, every other Q ROM looks fine
Click to expand...
Click to collapse
Padding has been a thing since AGES
Literally, look it up, try a P Aosp ROM (no modifications)
Or just, well, change the padding
But I guess you're too lazy to do that :/
Edit:
For clarification
Padding gets set by vendor in most ROMs

---

Some random said:
Padding has been a thing since AGES
Literally, look it up, try a P Aosp ROM (no modifications)
Or just, well, change the padding
But I guess you're too lazy to do that :/
Edit:
For clarification
Padding gets set by vendor in most ROMs
Click to expand...
Click to collapse
Don't call me lazy when you know nothing. I flashed every P and Q rom onto my tablet (including phh aosp) and the ones that boot look fine, meaning just as good as on my phone.
If it's a vendor thing, is there a vendor overlay I have to delete or what? If I knew how to modify and build ROMs I wouldn't be posting about it here.

---

thecoolkid said:
Hi, is notification pulldown supposed to look like that? I find it very missaligned and lacking padding ;/
Click to expand...
Click to collapse
hi, i changed nothing about that, so this is default BlissRom behavior

---

eremitein said:
hi, i changed nothing about that, so this is default BlissRom behavior
Click to expand...
Click to collapse
I understand that, that's what I suspected. Aren't there any overlays that can fix that though (I suspect bc it doesn't look like that on phones)?

---

thecoolkid said:
Don't call me lazy when you know nothing. I flashed every P and Q rom onto my tablet (including phh aosp) and the ones that boot look fine, meaning just as good as on my phone.
If it's a vendor thing, is there a vendor overlay I have to delete or what? If I knew how to modify and build ROMs I wouldn't be posting about it here.
Click to expand...
Click to collapse
That's because Bless forces a low padding
Trust me, I know a little more than you
Not because I flashed countless ROMs
Because I make ROMs
Edit
There is a command to change padding, I just don't know it out of my head

---

Some random said:
That's because Bless forces a low padding
Trust me, I know a little more than you
Not because I flashed countless ROMs
Because I make ROMs
Edit
There is a command to change padding, I just don't know it out of my head
Click to expand...
Click to collapse
If you find it let me know ?