This guide is for people who want root but want to keep their stock rom, not breaking the warranty, unlocking bootloader etc.
A proud ubuntu user, I am writing this in a new thread purely because the manual rageagainstthecage method and SuperOneClick method did not not work for me, see link to my conclusion below if you care
http://forum.xda-developers.com/showpost.php?p=11305312&postcount=2526
What did work however was via adb shell using psneuter and its fairly simple if you follow the following commands.
This guide assumes you know how to get access to the shell via adb, if you dont then search elsewhere.
OK lets get to business!
1. Download the attached nexus_one_softroot.tar from the bottom of this post and extract contents to the same folder as adb
2. Open up your terminal, cd to the same folder as adb and the extracted files
3. Enter the following commands:
Code:
sudo ./adb push psneuter /data/local/tmp/psneuter
sudo ./adb push busybox /data/local/tmp/busybox
sudo ./adb push su /data/local/tmp/su
sudo ./adb shell chmod 755 /data/local/tmp/psneuter
sudo ./adb shell chmod 755 /data/local/tmp/busybox
sudo ./adb shell chmod 755 /data/local/tmp/su
sudo ./adb shell
After this you should see only a $ which tells us that we at the android command line with user privileges only, lets continue
Code:
$ cd /data/local/tmp
$ ls
busybox
su
psneuter
$ ./psneuter
property service neutered.
killing adbd. (should restart in a second or two)
You will now be kicked out of android shell, lets go back in
Code:
sudo ./adb shell
After this you should see only a # which tells us that we root baby! If you want to double check issue this command
Code:
# id
uid=0(root) gid=0(root)
Lets continue on. From this point we will install busybox and su which will make root permanent
Code:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd /data/local/tmp
# ./busybox cp busybox /system/bin
# chmod 4755 /system/bin/busybox
# busybox cp su /system/bin
# chmod 4755 /system/bin/su
# exit
For some reason I sometimes have to enter exit twice to leave the android shell. Again, re-access the android shell
Code:
sudo ./adb shell
Now in the android shell we can finish up
Code:
# su
# mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
# exit
# exit
Lastly we must install Superuser, and I did this from the android market so I knew its the latest version, its simple to get, less command input etc.
Now you have root! I hope this was simple enough to follow, I have not really written a guide before but from lots of searching I just could not find a solution for my Nexus One 2.2.1 FRG83D, especially any guide that uses psneuter.
Anyway, glad to contribute
EDIT - also, being new to starting threads, this may not quite be in the right section of the forum, sorry if thats the case mods
This thread is designed for representation of the current progress on the Nook Tablet rooting and exploits, the second post will contain how to guides so you can learn to work on it for you self. REMEMBER I DO THIS FOR FUN, please respect the thread as well as others opinions
OLD UPDATES AT THE END OF THIS POST.
First off if you haven’t read the wiki yet to know what is currently in the device you should look here.
Also you should look at the http://www.nooktabletdev.orgfor information on the Nook Tablet Development process. - Thanks to dj_segfault
Rooting ScriptsWindows: Root, OTA block, De-bloat, Gapps Thanks to Indirect
Mac/Linux: Rooting script Thanks to t-r-i-c-k
Mac/Linux: Root,OTA Block, Gapps
CURRENT PROGRESS
adb connection: COMPLETE
adb root: COMPLETE
busybox:COMPLETE
permanent root: COMPLETE BY INDIRECT
GApps and Market: COMPLETE BY INDIRECT & Anlog
recovery mode: COMPLETE BY nemith
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANKS TO NEMITH
bootloader: Locked and Signed Irrelevant
uboot: CRACKED BY BAUWKS
THANKS TO BAUWKS
Loglud said:
bauwks method uses the flashing_boot.img to his advantage, and since it is not checked by security, effectively he has made an insecure uboot. While this is not an unlocked bootloader, it is a way to get around the security, and enable custom recovery and higher level processes to be run.
I have been looking at this line of code for a long time, and as im sure hkvc and bauwks saw it is a large (but 100% necessary) flaw:
distro/u-boot/board/omap4430sdp/mmc.c: 559 : setenv ("bootcmd", "setenv setbootargs setenv bootargs ${sdbootargs}; run setbootargs; mmcinit 0; fatload mmc 0:1 0x81000000 flashing_boot.img; booti 0x81000000");
Without this line of code, it would be impossible for any one but the factory whom could JTAG flash (but since it is secured, most likely they also have to make a flashing_boot.img).
Click to expand...
Click to collapse
12/9/11:
UBUNTU is here, thanks to ADAMOUTLER
http://www.youtube.com/watch?v=PwUg17pVWBs&hd=1
Keep in mind this is only an overlay verson but it is prof that one day we might be able to push roms and kernels over existing ones, then hijack then (next work) and then use them.
Please PM me or post if you know anything else, and or want to add anything.
Usefull threads
Usefull threads:
ROOTING:
Full root for Nook Tablet. [11/20/11] [Yes this is a permanent root!] Thanks to indirect
Noot Tablet - Easy root & Market on MAC (1 download, 1 script to run) Thanks to t-r-i-c-k
[Windows/Linux] Unroot and uninstall gApps for the nook tablet [Scripts] Thanks to indirect
MODS to Default Rom:
[Full Mod + Root + OTA block] Snowball-mod: Full Modification Root [1/6/2012] Thanks to cfoesch
[DEV][WIP] Enable init.d scripts and build.prop mods for Nook Tablet! Thanks to [DEV][WIP] Enable init.d scripts and build.prop mods for Nook Tablet! 1 Attachment(s) (Multi-page thread 1 2 3 ... Last Page)
Originally Posted By: diamond_lover
Kernels:Coming Soon
ROMS:Coming Soon
APPS:
[Tutorial][WIP] Installing alternative Keyboards on the NT. Thanks to robertely
[DEV] - HomeCatcher Redirect n Button to any Launcher Thanks to gojimi
Hidden Settings App Updated 12/30/11 Thanks to brianf21
Replacement SystemUI.apk v2: Permanent back and menu buttons, n as Home button Thanks to revcompgeek
DEVELOPMENT:
[Dev]Files of interest in the system Thanks to indirect
[REF] Nook Tablet Source Code Thanks to diamond_lover
BHT Installer (Basic Hacking Tools) Thanks to AdamOutler
[Stock Firmware]Restore Barnes & Nobel Nook 1.4.0 from SDCard Thanks to AdamOutler
Guides
Table of Contents
Enableing adb Connection (eab1)
Rooting using zergRush (rug2)
Installing busyboxy (ibb3)
Permanent root (pr4) THANKS TO INDIRECT
Installing GApps (aga5) THANKS TO ANLOG
Full system restore/wipe (fsr6) THANKS TO INDIRECT
Enableing adb Connection (eab1)
Install the andriod SDK that is required for your Operating system.
NOTE: This will requries the SDK, and JDK both of which can be downloaded by clicking the links, downloading and installing it.
Run the andriod SDK Manager and Install "Andriod SDK Platform-tools"
[*]Modify your adb_usb.ini file to read such as the following:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x2080
This will be in your /home/{username}/.andriod/ folder for mac and linux
This will be in your C:/Users/{username}/.andriod folder for Windows.
ADB is now enabled for your device, however it is not ON your device. YOU MUST DO THIS EVERY TIME YOU WISH TO ADB INTO YOUR DEVICE.
[*]To do this you will need to download any app, and attempt to install it.
You can use this app if you need.
[*]Click on the Package Installer, and then a prompt will pop up asking if you want change the settings to allow 3rd party apps.
*DO NOT ENABLE IF YOU WISH TO ACCESS ADB*
I am working on a way to have it enabled by default.
[*]In the settings page you should see *2* USB Debuggin modes.
[*]Press them both and accept the prompt.
[*]PLUG IN YOUR DEVICE.
Note* You should see the Android Development icon on the bottom of the screen.
ADB will now be able to see your device. How ever you will need to restart the server before it sees it.
Rooting using zergRush (rug2)
This is for the poeople whom have access to adb. You will also need this file. Unzip the file.
Type in the following command (while in the folder with the zergRush Binary):
Code:
adb push ./zergRush /data/local
[*]Once thats installed run this:
Code:
adb shell chmod 777 /data/local/tmp
[*]And lastly:
Code:
adb shell /data/local/zergRush
[*]You are now rooted (only for this reboot)
Installing busyboxy (ibb3)
You will need root and the following busybox file.
Type in the following command while in the location where busy box was downloaded to:
Code:
adb push ./busybox /data/local
[*]Busybox works by calling binaries from a file outside of /system/bin/. We must make this file by issuing the following command:
Code:
adb shell mkdir /data/busybox
[*]Lets make sure we can install busybox without permission probles:
Code:
adb shell chmod 777 /data/local/busybox
[*]Next install busybox in the folder:
Code:
adb shell /data/local/busybox --install
[*]We now need to take the /system/folder, and mount it as a writeable folder:
Code:
adb shell mount -rw -o remount /dev/block/platform/mmci-omap-hs.1/by-name/system /system
[*]Link it into bin:
Code:
adb shell ln -s /data/local/busybox /system/bin/busybox
You now have busybox installed
Permanent root (pr4)
THANKS TO INDIRECT for Files and Scripts
We will need SU and Superuser.apk
First we need to install the Superuser.apk:
Code:
adb wait-for-device install Superuser.apk
adb remount
[*]Next lets go ahead and push the su application up to the /data/local/ folder
Code:
adb push su /data/local/
[*]Next we will need to change the permissions and cp su from the /data/local/ folder to the /system/bin/
Code:
adb shell chmod 4755 /data/local/su;mount -o remount,rw /dev/block/platform/mmci-omap-hs.1/by-name/system /system;busybox cp /data/local/su /system/bin
Installing GApps (eab1)
THANKS TO ANALOG and INDIRECT for Scripts
First things first we need to download the GAPPS. The most reacent one is this one or get the most recent one here.
[*] Unzip and navigate to the most root folder of that package in your shell.
[*]We need to verify that adb is booting into root. To do this we can issue the command:
Code:
adb shell id
If id doesn't return root then you will need to re-zergRush your device
[*]Now it is time for us to export the apps to the directories.
Code:
adb shell mount -o remount,rw /dev/block/platform/mmci-omap-hs.1/by-name/system /system
adb push system/app/CarHomeGoogle.apk /system/app/
adb shell chmod 644 /system/app/CarHomeGoogle.apk
adb push system/app/FOTAKill.apk /system/app/
adb shell chmod 644 /system/app/FOTAKill.apk
adb push system/app/GenieWidget.apk /system/app/
adb shell chmod 644 /system/app/GenieWidget.apk
adb push system/app/GoogleBackupTransport.apk /system/app/
adb shell chmod 644 /system/app/GoogleBackupTransport.apk
adb push system/app/GoogleCalendarSyncAdapter.apk /system/app/
adb shell chmod 644 /system/app/GoogleCalendarSyncAdapter.apk
adb push system/app/GoogleContactsSyncAdapter.apk /system/app/
adb shell chmod 644 /system/app/GoogleContactsSyncAdapter.apk
adb push system/app/GoogleFeedback.apk /system/app/
adb shell chmod 644 /system/app/GoogleFeedback.apk
adb push system/app/GooglePartnerSetup.apk /system/app/
adb shell chmod 644 /system/app/GooglePartnerSetup.apk
adb push system/app/GoogleQuickSearchBox.apk /system/app/
adb shell chmod 644 /system/app/GoogleQuickSearchBox.apk
adb push system/app/GoogleServicesFramework.apk /system/app/
adb shell chmod 644 /system/app/GoogleServicesFramework.apk
adb push system/app/LatinImeTutorial.apk /system/app/
adb shell chmod 644 /system/app/LatinImeTutorial.apk
adb push system/app/MarketUpdater.apk /system/app/
adb shell chmod 644 /system/app/MarketUpdater.apk
adb push system/app/MediaUploader.apk /system/app/
adb shell chmod 644 /system/app/MediaUploader.apk
adb push system/app/NetworkLocation.apk /system/app/
adb shell chmod 644 /system/app/NetworkLocation.apk
adb push system/app/OneTimeInitializer.apk /system/app/
adb shell chmod 644 /system/app/OneTimeInitializer.apk
adb push system/app/Talk.apk /system/app/
adb shell chmod 644 /system/app/Talk.apk
adb push system/app/Vending.apk /system/app/
adb shell chmod 644 /system/app/CarHomeGoogle.apk
adb push system/etc/permissions/com.google.android.maps.xml /system/etc/permissions/
adb push system/etc/permissions/features.xml /system/etc/permissions/
adb push system/framework/com.google.android.maps.jar /system/framework/
adb push system/lib/libvoicesearch.so /system/lib/
Now you have GApps installed from Anlog's. All Credits go to him and Indirect
Full system restore/wipe (fsr6)
THANKS TO INDIRECT
WARNING THIS WILL WIPE YOUR ENTIRE FILESYSTEM!!!
Go into adb shell or terminal emulator.
Issue command:
Code:
echo -n '0000' > /bootloader/BootCnt
Next reboot your device by conventional methods or issue:
Code:
reboot
Your nook will now restart and tell you it is resetting.
You now have a clean slate!
Got some links for howto's on the adb connection/root.
Yeah - if someone has details on how to adb connect and root, it'd be helpful to include links. I've yet to see specifics for either.
Reserved
Sent from Tapatalk, NOOK Color CM7 Nightly's!
I aplogize im still typing them up
Damn loglud, I ended up beating you to the root lol. Sorry about that! D:
The Droid 2 and Droid X had locked bootloaders with the 'e-fuse' and Koush got around them and installed CWM with this...
http://www.koushikdutta.com/2010/08/droid-x-recovery.html
What do you guys think? I don't have a NT yet to try anything (probably won't get one until sometime around x-mas).
l
Indirect said:
Damn loglud, I ended up beating you to the root lol. Sorry about that! D:
Click to expand...
Click to collapse
Its no problem at all. Hints why i posted these guides. I was hoping someone wouod figure it out. I found it last night too. It sucked cause im now back at my childhood home trying to get my macbook pro to boot fedora and windows. Im gonna repackage the root with Superoneclick. Thanks so much for your effort. Would you mind if i added that to the guides?
Loglud said:
l
Its no problem at all. Hints why i posted these guides. I was hoping someone wouod figure it out. I found it last night too. It sucked cause im now back at my childhood home trying to get my macbook pro to boot fedora and windows. Im gonna repackage the root with Superoneclick. Thanks so much for your effort. Would you mind if i added that to the guides?
Click to expand...
Click to collapse
Superoneclick...love!
Sent from my Nook Tablet using Tapatalk
Loglud said:
l
Its no problem at all. Hints why i posted these guides. I was hoping someone wouod figure it out. I found it last night too. It sucked cause im now back at my childhood home trying to get my macbook pro to boot fedora and windows. Im gonna repackage the root with Superoneclick. Thanks so much for your effort. Would you mind if i added that to the guides?
Click to expand...
Click to collapse
Not at all so long as you give proper credits.
Loglud said:
This thread is designed for representation of the current progress on the Nook Tablet rooting and exploits, the second post will contain how to guides so you can learn to work on it for you self.
First off if you haven’t read the wiki yet to know what is currently in the device you should look here.
CURRENT PROGRESS
adb connection: COMPLETE
adb root: COMPLETE
busybox: COMPLETE
permanent root: IN PROGRESS
bootloader: Locked and Signed
By the bootloader being locked and signed it is very difficult to design anything that will boot besides nook roms. In order to solve this some of the Devs have suggested the following:
kexec: RESEARCHING
2nd init: RESEARCHING
CWM: NOT STARTED
Please PM me or post if you know anything else, and or want to add anything.
Click to expand...
Click to collapse
hopefully it is cracked soon cause i dont want to buy this if i can't have a full custom rom, all of the verizon motorola phones run roms off of 2nd init and it just isnt the same to be honest. you can never run a full custom rom with second init(well you can but you have to build the rom to fit the kernel) and honestly i want my device to be mine
you should tweet cvpcs or someone who makes and maintains 2nd init roms to get more info on it though
Can't get busybox installed
I'm stuck... I get errors for #3 for busybox... errors like...
Code:
$ adb shell /data/local/busybox --install
busybox: /data/busybox/[: No such file or directory
busybox: /data/busybox/[[: No such file or directory
busybox: /data/busybox/addgroup: No such file or directory
.....
busybox: /data/busybox/yes: No such file or directory
busybox: /data/busybox/zcat: No such file or directory
busybox: /data/busybox/zcip: No such file or directory
So I logged into root via adb shell, set busybox permissions to execute and tried that but same messages?!
Also, adb won't let me 'remount' - (I thought i'd try to copy it direct to /system/bin)?
(I'm running from OSX, if that matters)
EDIT: and of course I'm getting...
Code:
$ adb shell ln -s /data/local/busybox /system/bin/busybox
link failed Read-only file system
$ adb remount
remount failed: Operation not permitted
kgingeri said:
I'm stuck... I get errors for #3 for busybox... errors like...
Code:
$ adb shell /data/local/busybox --install
busybox: /data/busybox/[: No such file or directory
busybox: /data/busybox/[[: No such file or directory
busybox: /data/busybox/addgroup: No such file or directory
.....
busybox: /data/busybox/yes: No such file or directory
busybox: /data/busybox/zcat: No such file or directory
busybox: /data/busybox/zcip: No such file or directory
So I logged into root via adb shell, set busybox permissions to execute and tried that but same messages?!
Also, adb won't let me 'remount' - (I thought i'd try to copy it direct to /system/bin)?
(I'm running from OSX, if that matters)
EDIT: and of course I'm getting...
Code:
$ adb shell ln -s /data/local/busybox /system/bin/busybox
link failed Read-only file system
$ adb remount
remount failed: Operation not permitted
Click to expand...
Click to collapse
Sorry it took me so long to get back to you. I have updatd my guide to help you out. First of you will need to make the busybox directory, then change the permissions of the binary file, then run the install. You will then have to mount -rw
Still some glitches installing busybox...
Loglud said:
Sorry it took me so long to get back to you. I have updatd my guide to help you out. First of you will need to make the busybox directory, then change the permissions of the binary file, then run the install. You will then have to mount -rw
Click to expand...
Click to collapse
Thanks Loglud, but I still had trouble using adb. It's like I don't have root from adb? I get permission errors on mkdir and remounting etc?
Weird that the 'adb shell mkdir /data/busybox' gave me permission errors?! It did work fine with the interactive adb shell - weird!?
After the initial 'push' command, I could install via:
Code:
mac-osx$ adb shell
$ su root
# cd /data/local
# chmod 755 busybox
# ls -l
-rwxr-xr-x shell shell 1745016 2011-11-21 00:21 busybox
# mount -rw -o remount /dev/block/platform/mmci-omap-hs.1/by-name/system /system
# mkdir ../busybox
# ./busybox --install
Also, is the line:
Code:
# ln -s /data/local/busybox /system/bin/busybox
not supposed to be
Code:
# ln -s /data/busybox /system/bin/busybox
Things went weird on me in the final step, but I did manage to get all the hard linked busybox files to show up in /system/bin eventually, so I'm a happy camper.
EDIT: PS my mount on data is as follows..
Code:
# mount|grep /data
/dev/block/platform/mmci-omap-hs.1/by-name/userdata /data ext4 rw,nosuid,nodev,noatime,errors=panic,barrier=1,data=ordered 0 0
EDIT2:
Hmmm... seems like maybe my /data folder has weird permissions - if so not sure why?...
Code:
# cd /
# ls -l | grep '\<data\>'
drwxrwx--x system system 2011-11-21 18:25 data
# chmod 777 data
kgingeri said:
Thanks Loglud, but I still had trouble using adb. It's like I don't have root from adb? I get permission errors on mkdir and remounting etc?
Weird that the 'adb shell mkdir /data/busybox' gave me permission errors?! It did work fine with the interactive adb shell - weird!?
After the initial 'push' command, I could install via:
Code:
mac-osx$ adb shell
$ su root
# cd /data/local
# chmod 755 busybox
# ls -l
-rwxr-xr-x shell shell 1745016 2011-11-21 00:21 busybox
# mount -rw -o remount /dev/block/platform/mmci-omap-hs.1/by-name/system /system
# mkdir ../busybox
# ./busybox --install
Also, is the line:
Code:
# ln -s /data/local/busybox /system/bin/busybox
not supposed to be
Code:
# ln -s /data/busybox /system/bin/busybox
Things went weird on me in the final step, but I did manage to get all the hard linked busybox files to show up in /system/bin eventually, so I'm a happy camper.
EDIT: PS my mount on data is as follows..
Code:
# mount|grep /data
/dev/block/platform/mmci-omap-hs.1/by-name/userdata /data ext4 rw,nosuid,nodev,noatime,errors=panic,barrier=1,data=ordered 0 0
EDIT2:
Hmmm... seems like maybe my /data folder has weird permissions - if so not sure why?...
Code:
# cd /
# ls -l | grep '\<data\>'
drwxrwx--x system system 2011-11-21 18:25 data
# chmod 777 data
Click to expand...
Click to collapse
ok so whats happening? i modified the guides and i was hopping that would help you. The command is
Code:
# ln -s /data/local/busybox /system/bin/busybox
and as for your permissions it seems as though your root since your in the # shell but, you have to change the permissions on your /system folder not the /data folder the permsisions on the data file should be fine since i think shell is a member of system, so you can put all your data in there.
Loglud said:
ok so whats happening? i modified the guides and i was hopping that would help you. The command is
Code:
# ln -s /data/local/busybox /system/bin/busybox
and as for your permissions it seems as though your root since your in the # shell but, you have to change the permissions on your /system folder not the /data folder the permsisions on the data file should be fine since i think shell is a member of system, so you can put all your data in there.
Click to expand...
Click to collapse
Yeah, I'm root in the 'adb shell' because I 'su root' but adb commands fail from the Mac shell. I'll reboot my NT and give you the script. My /data permissions get reset when I reboot...
Here you are as it happens
MBAir$ ls busybox
busybox
MBAir$ adb push ./busybox /data/local
2881 KB/s (1745016 bytes in 0.591s)
MBAir$ adb shell mkdir /data/busybox
mkdir failed for /data/busybox, Permission denied
Of course there is no point continuing until I do the following...
MBAir$ adb shell
$ su root
# chmod 777 /data
# exit
$ exit
MBAir$ adb shell mkdir /data/busybox
MBAir$ adb shell chmod 777 /data/local/busybox
MBAir$ adb shell /data/local/busybox --install
MBAir$ adb shell mount -rw -o remount /dev/block/platform/mmci-omap-hs.1/by-name/system /system
mount: Operation not permitted
To get around the last error, I had to do another 'adb shell', 'su root' and do 'ln' commands manually.
(I actually ran a shell 'for loop' on the tablet, using all files found in /data/busybox as a list and issued ln commands for each against a copy of busybox in /system/bin)
kgingeri said:
Yeah, I'm root in the 'adb shell' because I 'su root' but adb commands fail from the Mac shell. I'll reboot my NT and give you the script. My /data permissions get reset when I reboot...
Here you are as it happens
MBAir$ ls busybox
busybox
MBAir$ adb push ./busybox /data/local
2881 KB/s (1745016 bytes in 0.591s)
MBAir$ adb shell mkdir /data/busybox
mkdir failed for /data/busybox, Permission denied
Of course there is no point continuing until I do the following...
MBAir$ adb shell
$ su root
# chmod 777 /data
# exit
$ exit
MBAir$ adb shell mkdir /data/busybox
MBAir$ adb shell chmod 777 /data/local/busybox
MBAir$ adb shell /data/local/busybox --install
MBAir$ adb shell mount -rw -o remount /dev/block/platform/mmci-omap-hs.1/by-name/system /system
mount: Operation not permitted
To get around the last error, I had to do another 'adb shell', 'su root' and do 'ln' commands manually.
(I actually ran a shell 'for loop' on the tablet, using all files found in /data/busybox as a list and issued ln commands for each against a copy of busybox in /system/bin)
Click to expand...
Click to collapse
re run zergRush exploit. your adb shell is defaulting to the shell username. by rerunning the zergy you will allow for yourself to use the adb shell as root. make sure you dont run it as the root user though. you are also more then welcome to hop in irc and ask questions.
Any one having difficulty rooting or see anything that needs to be updated?
I Request senior members to help me on this topic coz m a begainer to android m trying to root my cell since last 1 month but always i get an disappointment with 0 result so i request mods and senior members to help me in rooting my phone..
my cell is a made in china cell so i dont have the drivers
here are some more details for ur refference
campany name Aimax
model: R5830i
ANDROID VERSION: 2.3.5
BASEBAND VERSION: BASE_W12.17/sc6820_sp6820/04-20-2012/16:03:42
kernel version:2.6.35.7 [email protected]#9
software version:mocorDroid2.3.5.w12.09.10
hardware version:1.1.0
and one more thing when i connection to pc it shows found new hardware "spreadtrum phone" but it is unable to update the drivers...
Positive replies are always appreciated thanx in advance
Plez help
plez help waiting for your reply...
Rooting China phones in windows and linux
Try one of these:
1. Using linux {Recommended}Install Ubuntu or DebianEither
Install the android-sdk.
dl.google●com/android/adt/adt-bundle-linux-x86-20130717.zip <==x86
dl.google●com/android/adt/adt-bundle-linux-x86_64-20130717.zip <==x86_64
or
Just get the standalone adb and fastboot executables
texasice-cream-sandwich-mirror.googlecode●com/files/adb_fastboot.zipInstall ia32-libsRun this in a terminal
Code:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Now download the files required for root and put it in the same folder as adbmir●cr/GDEPZT4VAfter you finish installing the files,
Connect your device with debugging mode enabled
Run
Code:
cd path/to/adb
where "path/to/adb" is the directory of your adb file
Now run
Code:
sudo chmod a+x adb
sudo chmod a+x fastboot
>>Root
Code:
./adb devices
./adb push busybox /data/local/tmp/
./adb push su /data/local/tmp
./adb push Superuser.apk /data/local/tmp
./adb shell
Chmod and run the exploit under adb shell
Code:
cd /data/local/tmp
chmod 755 psneuter
./psneuter
Now re-engage an adb shell to check if the exploit worked.
Code:
./adb kill-server
./adb devices
./adb shell
If you see a # sign, the exploit was was successful. Otherwise repeat from >>Root
Now run these on the same adb shell
Code:
cd /data/local/tmp
./busybox ash
mount -o remount,rw /system
mv /data/local/tmp/su /system/xbin/su
chmod 6755 /system/xbin/su
chown 0.0 /system/xbin/su
mv /data/local/tmp/Superuser.apk /system/app/Superuser.apk
chmod 777 /system/app/Superuser.apk
cp /data/local/tmp/busybox /system/xbin/busybox
chmod 6755 /system/xbin/busybox
Now reboot your device and open up SuperSU. Let it update the binary.
Your device should be rooted. 2. Use Windows + MoboroboMethod 1 {Recommended but hard}
Download Moborobo from
Code:
moborobo●com
This software can Install drivers for many china phones and other branded phones.
After installing Moborobo download the files required for root
Code:
mir●cr/GDEPZT4V
Extract the files to the installation directory of Moborobo.
Code:
C:\Program Files (x86)\Moborobo
Run a CMD window under that directory and type
Code:
xcopy AndroidInterface.exe abd.exe
Connect your device in debugging mode & Open up Moborobo, It will install the drivers.
Keep Moborobo open & Follow the instructions mentioned in >>Root
P.S- the linux commands begin with a "./" remove this in windows or else it won't work. Note: Wherever I mentioned a terminal, the windows equivalent to this would be cmdMethod 2 {Easier}
Download and Install Moborobo just like above and run this under a cmd on that folder
Code:
xcopy AndroidInterface.exe
Also download UnlockRoot or SuperOneClick
To make sure the adb files are same, Copy over
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
to UnlockRoot's tools directory or SOC's ADB directory
Connect your device in debugging mode and open up moborobo.
Now keep Moborobo open and Run UnlockRoot or SOC. Good Luck :good:
(c) Smo0thK, team BL4CKF1R3
Press thanks if I helped you.
Nice tutorial you have posted Smo0thK. Please also comment on the following points.
1) Which tablets have you tried the above methods to get root access. Since most of the tablets in Indian market are from China, same would be the situation in Bangladesh and similar techniques can be used. Please list their Brand and model numbers.
2) I personally use a Penta IS701c which actually is pre-rooted from factory but the su command does not work because configuration is messed up. (# prompt in ADB shell indicates root access) Many of these Chinese tablets come pre-rooted from factory but to get su command working things have to be cleaned up. What is your experience about this.
3) Android 3.1+ devices must support USB Host mode but most of the tablets are lacking support. (Use USB Host Diagnostics app to find out).
Have you found any tablet that supports USB Host mode without a custom kernel.
Best Regards,
Vineet Kumar
Hi everyone, first all I apologize for my English a bit "strange", being French, I do not mania Shakespeare's language as well as you.
I post here to request your help: I have a low cost tablet brand "Boulanger" visible in google with the next words : "Tablette multimédia android ESSENTIELB Smart'TAB 8002 16Go "
Despite several attempts on my part, I can not get to the rooter, whether with tools like "UnlockRoot" or line by line with this procedure:
"First, here are the commands that run the psneuter exploit and gain a root shell.
adb devices
adb push psneuter /data/local/tmp
adb shell
$ cd /data/local/tmp
$ chmod 777 psneuter
$ ./psneuter
"
I can not make CHMOD do not have sufficient rights.
Here is the information I have on the shelf:
"Device detected: ST8002 (V2.0.1.JRO03C.user.root.20130503)"
Thank you for your help.
@ +
toniodu7666 said:
Hi everyone, first all I apologize for my English a bit "strange", being French, I do not mania Shakespeare's language as well as you.
I post here to request your help: I have a low cost tablet brand "Boulanger" visible in google with the next words : "Tablette multimédia android ESSENTIELB Smart'TAB 8002 16Go "
Despite several attempts on my part, I can not get to the rooter, whether with tools like "UnlockRoot" or line by line with this procedure:
"First, here are the commands that run the psneuter exploit and gain a root shell.
adb devices
adb push psneuter /data/local/tmp
adb shell
$ cd /data/local/tmp
$ chmod 777 psneuter
$ ./psneuter
"
I can not make CHMOD do not have sufficient rights.
Here is the information I have on the shelf:
"Device detected: ST8002 (V2.0.1.JRO03C.user.root.20130503)"
Thank you for your help.
@ +
Click to expand...
Click to collapse
Hello
At jiun 2013 i buy 2 smart tab 8002
first, started at 21/7/2013
blanc laqué
133938
13_21_1003117
st8002
v 4.1.1
v3.0.8
v2.0.1.JRO03C.user.root.201303503
at september, start
rouge
133940
13_03_1003117
v 4.0.4
3.0.8
v2.0.5.IMM76I.user.20121210
= 2 st8002 but 2 android version !
My 2 kids can't play at same game.....
Nobody have tips to upgrade the oldest ?