[help][android][telechips cpu] - Android Q&A, Help & Troubleshooting

[help][android][telechips cpu] - Android Q&A, Help & Troubleshooting

We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.

lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
Bạn đã tìm được câu trả lời chưa?

JohnMichael12 said:
Bạn đã tìm được câu trả lời chưa?
Click to expand...
Click to collapse
We can connect to the AVN via uart port so we can control some boot function and display boot message. But we still can not switch the AVN to bootloader mode (don’t find correct command to switch to bootloader mode).

lamtom said:
We can connect to the AVN via uart port so we can control some boot function and display boot message. But we still can not switch the AVN to bootloader mode (don’t find correct command to switch to bootloader mode).
Click to expand...
Click to collapse
Bạn có thể mô tả các lệnh mà bạn đã làm được không?

JohnMichael12 said:
Bạn có thể mô tả các lệnh mà bạn đã làm được không?
Click to expand...
Click to collapse
1. Change boot to recovery mode.
2. Change boot to download mode.
3. Skip load quickboot data.
4. In normal boot, after booting process, via UART we can login linux console like "adb shell".

Bạn có thể nói cách làm cho mọi người biết được không? Tôi đang gặp trường hợp "AVN it was stucked in recovery loop". Để vào "nomal boot" hoặc chế độ "fastboot" thì làm thế nào?

lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
How to you update update.zip file from manufactor. I can't open update.zip because password

lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
Hi, Are you resolve the problem. I got same issue with you

nobitanguyen said:
Hi, Are you resolve the problem. I got same issue with you
Click to expand...
Click to collapse
With some device, via uart port we can skip the recovery and the unit change to normal boot. But in some of them the normal boot still stuck so we can’t fix. We don’t find the command to switch device to fastboot mode.

Related

[STOCK][8.0][[A9100] official oreo has been released

Android oreo has been released! Dowanload below
I cant add links in the main post so read first comment

Download rom from here:
https://cloud.mail.ru/public/Fn6v/TtHv6jLcU
https://4pda.ru/pages/go/?u=http://merk.under.net.ua/A9100ZCU1BRK3_A9100CHC1BRK3_CHC.zip&e=83546284
Android oreo has been released! Gapps worked!
Inastllation1.Download ROM
2.flash ROM via odin https://samsungodin.com/
3.flash twrp via odin https://androidfilehost.com/?fid=457095661767135545
Go to twrp and Wipe-> Format Data-> yes, reboot to twrp without booting system and
4.Download and fllash https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip
5.flash gapps from toman15 mediafire.com/file/u4wbcq02ngt55la/GAPPS800_HostEdited.zip/file
6.Flash magisk if you need root https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
7.Freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" to evade bootloop after restart
Enjoy!
Please dont install csc file posted here, it may cause gps problems
How to fix Google Contacts Sync issue
Open Settings and navigate to Apps.
In Apps, select App Info and tap on the three dots at the top right corner and select Show system.
Now look for Contacts Storage
Open Contacts Storage, select Storage and then tap Clear Data.
And you need to give to "Contacts Storage" permissions to change contacts in permissions window
Fix samsung health
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
Fix Mobile hotspot don't work (dont need, if you flash gapps from toman15)
remove all data in your /etc/hosts, except
Code:
127.0.0.1 localhost
::1 ip6-localhost

don't flash gapps package downloaded from opengapps
if you guys updated this gapps and stucked in the black screen you have to odin again. then wipe data and cache in stock recovery with power+home+v+ and wait 20 seconds to enter the wipe menu. then you have to odin TWRP again (https://forum.xda-developers.com/sa...wrp-3-0-2-1-samsung-galaxy-a9-pro-sm-t3426701) . enter the new TWRP recovery when odin processing finished. update Gapps 800.zip and magisk.zip( if you guy want to root your phones. you can find the lastest magisk.zip on google.) and the last step is wiping Dalvik cache in TWRP recovery, reboot your phones and wait minutes. so you can see some apps are gonna be fc. don't worry. log in google play and install link2sd or every other app can uninstall system apps. so you can remove what apps be fc.
link gapps: https://drive.google.com/file/d/1gx...EEDnpER62MPG1yIGdq54hHHdIQYzJ1WBv57n45dcJLbao
link magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
good luck!
------------------------------------------------------------------------------------------------------------------------------------------------
For Vietnamese People.
Những bạn nào đã cài Android 8 mà không có google apps thì đừng cài file tải từ opengapps về. Nó sẽ xuất hiện màn hình màu đen trong quá trình đăng nhập mà không có cách nào có thể dùng được.
Có nhiều bạn không biết là samsung không hoạt động với Google installer gì đó thì nhất quyết đừng tải mấy cái apk đó về cài chi cho mệt vì không thể dùng được.
Các bạn cài file mình vừa đem link ở trên bằng cách flash lại rom gốc 8.0 sau đó không cho máy khởi động lên mà nhấn tổ hợp 3 phím power + home + V+ rồi đợi 1 phút gì đó để nó vào màn hình wipe sau đó wipe data với cache. sau đó cho máy khởi động vào download mode sau đó odin tiếp file TWRP mình có dẫn link ở trên. sau khi odin xong thì các bạn lại nhấn tổ hợp power + home + V+ 1 lần nữa sau đó flash file zip Gapps 800.zip mình dẫn link ở trên. nếu thích root máy thì nhấn flash tiếp file magisk.zip ( tất cả những file này đều phải được copy vô thẻ SD card nhé.)
sau đó wipe davik cache và khởi động lại.

mauxyahpy said:
don't flash gapps package downloaded from opengapps
if you guy updated this gapps and stucked in the black screen you have to odin again. then wipe data and cache in stock recovery with power+home+v+ and wait 20 seconds to enter the wipe menu. then you have to odin TWRP again (https://forum.xda-developers.com/sa...wrp-3-0-2-1-samsung-galaxy-a9-pro-sm-t3426701) . enter the new TWRP recovery when odin processing finished. update Gapps 800.zip and magisk.zip( if you guy want to root your phones. you can find the lastest magisk.zip on google.) and the last step is wiping Dalvik cache in TWRP recovery, reboot your phones and wait minutes. so you can see some apps are gonna be fc. don't worry. log in google play and install link2sd or every other app can uninstall system apps. so you can remove what apps be fc.
link gapps: https://drive.google.com/file/d/1gx...EEDnpER62MPG1yIGdq54hHHdIQYzJ1WBv57n45dcJLbao
link magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
good luck!
------------------------------------------------------------------------------------------------------------------------------------------------
For Vietnamese People.
Những bạn nào đã cài Android 8 mà không có google apps thì đừng cài file tải từ opengapps về. Nó sẽ xuất hiện màn hình màu đen trong quá trình đăng nhập mà không có cách nào có thể dùng được.
Có nhiều bạn không biết là samsung không hoạt động với Google installer gì đó thì nhất quyết đừng tải mấy cái apk đó về cài chi cho mệt vì không thể dùng được.
Các bạn cài file mình vừa đem link ở trên bằng cách flash lại rom gốc 8.0 sau đó không cho máy khởi động lên mà nhấn tổ hợp 3 phím power + home + V+ rồi đợi 1 phút gì đó để nó vào màn hình wipe sau đó wipe data với cache. sau đó cho máy khởi động vào download mode sau đó odin tiếp file TWRP mình có dẫn link ở trên. sau khi odin xong thì các bạn lại nhấn tổ hợp power + home + V+ 1 lần nữa sau đó flash file zip Gapps 800.zip mình dẫn link ở trên. nếu thích root máy thì nhấn flash tiếp file magisk.zip ( tất cả những file này đều phải được copy vô thẻ SD card nhé.)
sau đó wipe davik cache và khởi động lại.
Click to expand...
Click to collapse
You ROCK! Google apps working fine?
upd: Just test it, and it realy works! Thank you! Im spend 3 days trying to resolve it. Where are you find this gapps?

sanakess said:
You ROCK! Google apps working fine?
upd: Just test it, and it realy works! Thank you! Im spend 3 days trying to resolve it. Where are you find this gapps?
Click to expand...
Click to collapse
it also took me 3 days to resolve it. I have no idea to install gapps but when I am really so hopelessly. I found out this gapps package in a forum of xiaomi phones and i tried with it again and so surprised, it worked
my phone is useless without google services
can you update your post with a detailed tutorial and all of the files are needed for everybody stuck in this step.
it would be useful

Can you explain how is this rom with gapps installed?
If you can upload screen shots
I'm on android 6 basicplus and considering to install this rom.
Thank you

MahBB said:
Can you explain how is this rom with gapps installed?
If you can upload screen shots
I'm on android 6 basicplus and considering to install this rom.
Thank you
Click to expand...
Click to collapse
This rom installed without gapps, because no google in china. You need to install gapps from TWRP recovery after install the rom.

sanakess said:
This rom installed without gapps, because no google in china. You need to install gapps from TWRP recovery after install the rom.
Click to expand...
Click to collapse
After a few tries, I finally installed this room with working gapps.
Thank you.
There was a error message that said unauthorized access ..., Which when I restarted the phone the room didn't start. I reinstalled every thing and disabled the logger and everything is fine now.
What was the unauthorized access? The room was official, right? Was it because of gapps or magisk?

MahBB said:
After a few tries, I finally installed this room with working gapps.
Thank you.
There was a error message that said unauthorized access ..., Which when I restarted the phone the room didn't start. I reinstalled every thing and disabled the logger and everything is fine now.
What was the unauthorized access? The room was official, right? Was it because of gapps or magisk?
Click to expand...
Click to collapse
I think it was magisk (root) You need to reinstall magisk from twrp and freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" if you want to use root

sanakess said:
I think it was magisk (root) You need to reinstall magisk from twrp and freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" if you want to use root
Click to expand...
Click to collapse
The first time it happened I didn't installed magisk. So it must be sth else. Now I just disabled security log agent and all is well. I was just a little worried about the security of this method. Is it safe?

MahBB said:
The first time it happened I didn't installed magisk. So it must be sth else. Now I just disabled security log agent and all is well. I was just a little worried about the security of this method. Is it safe?
Click to expand...
Click to collapse
So twrp. And it is really unsafe, since all files are not encrypted, the password from the phone is reset by several actions on the TWRP. Although there are some ways to make it more secure, but I'm not messing about it. The phone itself should work fine, as this is just a warning about security issues.

sanakess said:
So twrp. And it is really unsafe, since all files are not encrypted, the password from the phone is reset by several actions on the TWRP. Although there are some ways to make it more secure, but I'm not messing about it. The phone itself should work fine, as this is just a warning about security issues.
Click to expand...
Click to collapse
Samsung health also not working. Problem with rooted phones apparently

MahBB said:
Samsung health also not working. Problem with rooted phones apparently
Click to expand...
Click to collapse
Try to hide root in magisk or make clean install without it

sanakess said:
Try to hide root in magisk or make clean install without it
Click to expand...
Click to collapse
Hide didnt work out. Also with a Chinese phone you would need root to remove all that apps and stuff. I have found another way, I will test.

Build prop editor solved Samsung health problem.

MahBB said:
Samsung health also not working. Problem with rooted phones apparently
Click to expand...
Click to collapse
MahBB said:
Build prop editor solved Samsung health problem.
Click to expand...
Click to collapse
Can you share a guide?

sanakess said:
Can you share a guide?
Click to expand...
Click to collapse
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
---------- Post added at 09:26 PM ---------- Previous post was at 09:23 PM ----------
There are all these Chinese characters scattered in every corner of the phone. Do you have any idea how to remove them?
Or remove the yellow pages?
Is there any list of bloatwares on this phone?

MahBB said:
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
---------- Post added at 09:26 PM ---------- Previous post was at 09:23 PM ----------
There are all these Chinese characters scattered in every corner of the phone. Do you have any idea how to remove them?
Or remove the yellow pages?
Is there any list of bloatwares on this phone?
Click to expand...
Click to collapse
You can try this https://drive.google.com/file/d/1XWmMG_Y_60fL33zEgHF5IBRJoG489fs7/view One man from 4pda.ru make it to remove chinese fings. I dont test it, so make backup in twrp before flash it

SO! what about working hotspot? I need hotspot my notebook also working from smart

I don't know how to change search engine in Samsung internet browser to Google. so inconvenient with Baidu search engine.
I tried to change the code in system/csc/other.xml. but it didn't work at all.

The amlogic 8726-mx device has a black screen

The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com

Help me, plz

12march said:
The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
Click to expand...
Click to collapse
Mask Rom mode will probably be needed

aidanmacgregor said:
Mask Rom mode will probably be needed
Click to expand...
Click to collapse
Please give me detailed instructions

12march said:
Please give me detailed instructions
Click to expand...
Click to collapse
First step would be to figure out what NAND chip is in your device, then look here for the same or similar (same manufacturer often use same pins) to figure out the pins to short
NAND Chip Mask ROM Mode Short Location - FreakTab
Hi Everyone We have created this thread to collect all the NAND pin Short to Mask ROM Mode locations for all our members. Because firmware comes on android
forum.freaktab.com

Brick LG V50S ThinQ (V510N)

When I erase entire Flash on QFIL ( Partion manager ) , PC connection only receives port " qualcomm hs-usb qdloader 9008 ", How to unbrick,Thank ( Sorry my english is not good )
PS : Done

After unbrick , imei phone =0 . Can you help me?

heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..

heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50

wibigdog said:
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
Click to expand...
Click to collapse
Yes...with QFIL.....

agn8888 said:
Yes...with QFIL.....
Click to expand...
Click to collapse
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.

wibigdog said:
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
Click to expand...
Click to collapse
I tried to follow this tutorial for LG G7 https://forum.xda-developers.com/t/how-to-recover-from-any-hardbrick-or-red-case-in-9008-mode-without-any-boxes.4052841/
Sadly, the rawprogam generator for V30 that they used have stopped working for newer models.

You need firehose to reload the modemst1 and modemst2.... with qfil...

firehose lg v50...

Hi, do you happen to check or verify what's hardware info on the soundcard of your V50S?
I've been looking to check if the Quad-DAC is from ESS or from Qualcom's.

agn8888 said:
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
Click to expand...
Click to collapse
Many thanks to you kind person!!! I faced "no signal issue" on v50s after crossflash. I Used QFIL and flashed your fgs,modemst1 an modemst2 partitions and it works fine with v50s. I'm happy!

Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com

Zenozero said:
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Click to expand...
Click to collapse
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
0. Consult the recovery method of lg v50 or other machine and find the program file to install. QFIL and LGUP or LG Drive.
1. go to load xml.
2. select the extracted lg backup file and select it
all .xml files select open
3. choose cancel
4. choose download
5. wait for it to load
6. When done, press the volume button - at the same time with the power button for about 12 seconds
release, wait 10 20 seconds if no response press again. If it is up, the logo will appear and then turn off. Press and hold volume + button to enter downloade mode and then go to lgup up to rom.
7. In LGUP when pressing Start, there will be a notice board, please select Yes.

Zenozero said:
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
Click to expand...
Click to collapse
It seems the file has been deleted.
Could you please update the link ?

Firmware for Tanix TX3 Mini+ (S905W2)

Official firmware for this device. There are two firmware versions, one for the cheaper variant with only 2,4 Ghz WiFi and other for the dual-band (2,4 and 5 Ghz) variant.
Single band (2,4 Ghz WiFi) - TX3mini_S905W2_20211115.img
Dual band (2,4 and 5 Ghz WiFi) - TX3MINI_plus_dual_20211113.img
I tested the dual band version on my 4/64 GB device and it works. Installed with Amlogic USB Burning Tool.
Anyway, the firmware is still very buggy and root access doesn't work properly yet. Can't use OAndBackupX to restore my apps, nor AdAway to block ads... Consider this firmware only useful if you brick your device and need to flash it.

thanks.
What custom roms do you recomend for a tanix tx3 mini-L?

I don't have that model, but I would try Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
The site is in russian, but you can use the translator of Chrome/Chromium.

I'm just curious about the box, as it looks quite intriguing specs-wise. Reached any verdict yet?

Hardware is good, but the firmware is still buggy.

Currently with tx3 plus, I can't boot it from sd card or use any way like debug with adb. Can someone help me? Thank you very much

Anyone else experiencing issues with hdr and 4k 60hz? Sometimes i have the option and sometimes i dont

I there a custom ROM already for the tx3 Mini+ ?

there are many revisions of the TX3 Mini (unique ones are rev 1.3, 1.6)
most of them have eMMC, while I have the weird 3D-NAND version
(that's rev 1.3 btw)
which revision is this firmware for?

LITUATUI said:
LITUATUI said:
Does you have a custom recovery for Tx3 mini+ i really need it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
LITUATUI said:
Phần mềm chính thức cho thiết bị này. Có hai phiên bản phần sụn, một cho biến thể rẻ hơn chỉ có WiFi 2,4 Ghz và một cho biến thể băng tần kép (2,4 và 5 Ghz).
Băng tần đơn (WiFi 2,4 Ghz) - TX3mini_S905W2_20211115.img
Băng tần kép (WiFi 2,4 và 5 Ghz) - TX3MINI_plus_dual_20211113.img
Tôi đã thử nghiệm phiên bản băng tần kép trên thiết bị 4/64 GB của mình và nó hoạt động. Được cài đặt với Amlogic USB Burning Tool.
Dù sao, phần sụn vẫn còn rất nhiều lỗi và quyền truy cập root vẫn chưa hoạt động bình thường. Không thể sử dụng OAndBackupX để khôi phục ứng dụng của tôi, cũng như AdAway để chặn quảng cáo ... Hãy xem xét chương trình cơ sở này chỉ hữu ích nếu bạn đặt thiết bị của mình và cần flash thiết bị.
Click to expand...
Click to collapse

SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.

ola nao falo inglessou do brasil alguem ai no foro tem o backup original
da box tx9 normal nao e a mini

LITUATUI said:
SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.
Click to expand...
Click to collapse
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?

hojnikb said:
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?
Click to expand...
Click to collapse
It does, I'm using it for some weeks now.

can we expect a11 a12 on our tx3 mini or not

mình cần rom cho phiên bản tx3 mini 2g chạy android 11. có dùng được bản nào ít lỗi không
Mod translation via GT: I need rom for tx3 mini 2g version running android 11. can I use any version with few errors?

LITUATUI said:
Nó có, tôi đang sử dụng nó trong vài tuần nay.
Click to expand...
Click to collapse
can i flash it to tx3 mini 2.4g running android 11

LITUATUI said:
Não tenho esse modelo, mas tentaria o Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
O site está em russo, mas você pode usar o tradutor do Chrome/Chromium.
Click to expand...
Click to collapse
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program

niconstill said:
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Hi.
Are you using the correct cables? A USB A - A like this one.

niconstill said:
...I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Try this, install Terminal Emulator app and execute command reboot update and quickly connect USB cable, while burning tool is running...

[SOLVED]Phone just died and cannot be turned on after flashing rom

So i just rooted my phone by patching samsung ap firmware with recovery mode checked. And flash that patched magisk file alongside with the cp csc and bl file trough odin.
Then, i flash this twrp https://dl.twrp.me/a10/twrp-3.6.2_11-0-a10.img.tar.html trough odin by putting twrp file on ap and vbmeta_disabled file on userdata. The phone automatically reboot after flash so i long pressed the vol+ and power button immediately until i opened the twrp mode.
I wipe the data, cache, dalvik-cache, system, and vendor. Then install android 11 64 bit nusantara project 2.9 unofficial. Reboot and the screen goes black but the screen hasn't turned off. After some second the screen is completely turned off. No text appear. I can't open odin mode. I tried to long press power button and nothing. This is my first time flashing twrp. Any help is really apreciated
Edit: After some time the phone feels warm so that means the phone is running?
Edit(2): Somehow i managed to get to odin/download mode and flash the stock firmware

people need to learn how to hard reboot by long pressing volume down and power

Xin chào, bạn có thể vui lòng cung cấp cho tôi thêm thông tin về cách bạn giải quyết vấn đề với điện thoại của mình không? Tôi nghĩ rằng tôi đang gặp vấn đề tương tự và tôi đang tìm kiếm một giải pháp để khắc phục nó
**Mod Edit: Translated**
Hi, could you please give me more information on how you solved the problem with your phone? I think I'm having the same problem and I'm looking for a solution to fix it

@WiBuMan Please remember that the use of English is required on XDA:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.
Click to expand...
Click to collapse
As a courtesy, I have translated your post.
Please post in English from now on.

V0latyle said:
@WiBuMan Please remember that the use of English is required on XDA:
As a courtesy, I have translated your post.
Please post in English from now on.
Click to expand...
Click to collapse
Sorry, I used Google Translate to translate the previous sentence and mistakenly pasted the original sentence instead of the English translation in my comment. I apologize for the confusion."

Better Mobile App

welcome